The Ultimate Workhorse: Creality CR-10 SE 3D Printer Review

[@Cod361]

Got one for my birthday day and love it

[@CRIZS_CREATIONS]

Nice one Enjoy 🎉

[@calixtao1]

very detailed review, thank you!

[@CRIZS_CREATIONS]

Thankyou, for the feedback.

[@reviewznmore8573]

I am bing watching your video. You have great knowledge and most implemently the way you share this information, keep it up brother.

[@CRIZS_CREATIONS]

Its feedback like this that keeps me going. Thanks mate. More content on the Way this weekend Tutorials, Printers & more. Cheers

[@reviewznmore8573]

@@CRIZS_CREATIONS I know how hard it is. I'm from India and 3d printing is super nish here. I own cr10SE and have been working hard to learn more n more. Here there are few to none who have knowledge about 3d printing n slicers like orca. I have been helping people around as much as I can and that is coz of PPL like you who share this knowledge. 👍🏻

[@AleksandarTeodorovic]

Thats a nice review. Form look of PEI sheet, that printer has some mileage on it. How do you maintain Z ballscrew and linear guides. What lube do you use. I have this printer for a month, its great. Thanks.

[@CRIZS_CREATIONS]

Thankyou, Actually the Print PEI sheet had so glue on it as I was testing some CF & Petg and forgot to clean the build plate, Its only got about 120hrs on itI'm all about getting the right information out there as so many Influencers in the indsutry have alterative motives and dont go into the detail on the actually benifits or negatives they tend to just just woffle on specs and data sheets instead and complain. As farf as Lube for the linear rails I use Lithium grease a little goes a long way. Cheers

[@Phelnok]

Orca Slicer part 2?? did i miss the first one?? where do i find it, its not on your channel?

[@CRIZS_CREATIONS]

Sorry mate bit confusing I know. Part 1 is being upload this evening so you'll be able to watch Part 1. Add any Custom Printer to Orca slicer or Cura including G.code & profile settings. Apologies for the confusion 😬

[@Phelnok]

@@CRIZS_CREATIONS no worries bub. Been looking forward to watching it.. I have it rooted already and connected to orca slicer and prusa.. Really eager to learn the settings and be able to tune in this printer for some wicked prints :) I was wondering, Nebula pad or Sonic for marlin printers? I found the Nebula pad is like $60 cheaper and it comes with the ai camera... 😁Thank you again and be well...

[@CRIZS_CREATIONS]

Uploading Part 1 Now. Had some Editing Errors so it was a bit delayed@@Phelnok

[@Phelnok]

@@CRIZS_CREATIONS sweet.. looking forward to seeing it :)

[@CRIZS_CREATIONS]

I use the Ender 3 SE as an Example in the Video on how to Add the Correct G.code and the Correct Build & Printer Profile in the Video But the CR10-SE or any other Printer exactly the same process, It's uploading to YTB now taking its sweet time lol@@Phelnok

[@Phelnok]

can i use the k1 profile in orca slicer for the cr-10 se??? Also I'm not seeing the root access in the description...

[@CRIZS_CREATIONS]

Great Question, Unfortunately no, The Reason why is the G.code for the CR10-SE being a Bed slinger needs different Acceleration and Z Y movements for Travel and Homing. I do have a Profile for CR10-SE I will be doing a Video on Creating Profiles for Orca Slicer on Sunday. Stay Tuned for that heaps of other use full slicer settings aswell.

[@Phelnok]

@@CRIZS_CREATIONS Awesome.. tyvm :) Live stream or posted video?

[@CRIZS_CREATIONS]

I will uploading the Video on Tuesday as I had some delays with recording@@Phelnok

[@Phelnok]

@@CRIZS_CREATIONS Awesome. tyvm for the info. cant wait to see it. if posable would you happen to have an orca slicer profile for the cr-20 se?

[@CRIZS_CREATIONS]

@@Phelnok HI, When I post the Video I will go through not only the CR10-SE setup but also How to Setup basically any other printer via a Custom Profile including start & End G.Code, Extruder, Accelerations settings & Profile Setup. This will be a Part series with a Follow up Part 2 Speed settings, Part 3 Quality & Overall Settings Walk through then Part 3 Supports & Advanced Features, I am currently doing alot testing with Varied printers so I will post each Part series 1-2 times per week. So that way it is not too much to take in all at once. Hope this Helps. Once again I appreciate the Support it really does motivate me to provide more content and try harder to provide more quality videos for my viewers and supporters. Thankyou it means alot.

[@ONE_EYE_3D]

how can i find the root info i seem to not be able to ssh in even after the creality update good video

[@MrSiciro]

Update to 27 and then open the settings tab with the gear. Scroll down and you will see the Root option

[@mbudron9837]

Great review! Thanks

[@MrSiciro]

One thing I hate about this printer is the VFA's on the Y axis that I can not get rid off

[@CRIZS_CREATIONS]

VFA is almost common on every single printer on the retail market. The best advise is to make sure you complete the VFA calibration Print Test in a Gloss 3D Filament to show the VFA layers more clearly and then Lower you Top Surface Layer printing speed by 10-20% below the VFA best speed settings. Followed by making sure your belts on the linear rails are not over tightened which should be approx no more than 2pounds or 7.5nm of tension.

[@MrSiciro]

@@CRIZS_CREATIONS VFA's are so bad that it looks like ripples on a lake when viewed from above. Luckily it returned it

[@CRIZS_CREATIONS]

@@MrSiciro Well that's a first for me. Oh well. Hopefully you get something you can work with. As for me I have no issues prints very nicely. Good luck with whatever you go with.

[@playandkeepcalm]

Creality k1 orncr-10 ? Quality no time i need

[@CRIZS_CREATIONS]

If you can afford it Core XY Printer will always give better quality than bed slinger. So if you can afford K1 get the K1, Otherwise the CR10-SE is Cheaper and Awesome.

[@playandkeepcalm]

@@CRIZS_CREATIONS k1 some specyfic model?

[@CRIZS_CREATIONS]

@@playandkeepcalm depends on your printing needs? Small or large projects. If you projects are not too big and 220x220 is big enough get K1 the new K1C it is better print quality than than the K1 speedy and new system. But both K1 speedy & K1C are $250U-300USD more than the CR10-SE which is a great printer.