FAST and EASY Electronic Parking Brake Release Trick

The ABSOLUTE BEST way to retract electric brake calipers. Today i"m working on a 2015 VW R with an ELECTRONIC E-BRAKE, i'm going to show you how to push the piston back in to replace your rear brake pads, this is the fastest and easiest way to do it.
Gratitude paypal.me/Homi...
MERCH teespring.com/...
Tool Box Stickers teespring.com/...
Tools Recommended:
Lisle Rear Brake Toolamzn.to/2DcurNi
Lisle Single Piston Retractor amzn.to/2qGD3sW
Lisle Dual Piston Retractoramzn.to/37EQdrk
OEM Brake Pad Spreaderamzn.to/37t8Wpz
Lisle Caliper Hangersamzn.to/35qxmhG

[@HomieHektor]

If you guys are interested in buying some brake tools check the description of the video. To get the exact same caliper piston depressor used in this video use this link right here... amzn.to/37z1NUW Thanks For Watching, Hope it helped you out!!!

[@StankoOpacic]

Hektor, thanks for the great video. I was wondering is it safe to leave the car during the night with pulled electronic handbrake while outside temperature is below zero?

[@DCBA-xc9ht]

Es mejor video sobre este tema está en español.

[@michaeldarling8061]

you are very smart thanks working on my wifes vw rear brakes thank you aMike

[@rodger6940]

Hey bro, is this the same procedure for 2019 Alfa romeo giulia?

[@mmgcash522]

Hektor, you're a lifesaver. I was stuck with the brakes all apart on my 2015 Hyundai Sonata Limited, and heard lots of expensive advice on how to do this with the scanners and special tools. I did what you said, and it worked perfectly. Thank you so much!!

[@standonald5145]

Hektor , iv been watching a few guys doing the rear calipers with electronic hand breaks , REALLY at the end of the day there was nothing wrong with the old handbreak cable system , SO you are the fourth guy iv watched doing this job , lost an hour , but gained a lot of knowledge so I'll be more confident doing my rear brakes on my engine driven Tin Can . Each guy approached this job from a different perspective but all in all got the job done and NO need for an expensive garage bill , Stay Safe Hektor , Stan up in Edinburgh Scotland UK .

[@joshuaanderson8508]

I was able to do it with just a 9V battery! watched your video and had nothing other than a 9Vand it worked. was slower than a 12v but it still worked!

[@narutorasengan162]

Actually it did work!

[@conradb7200]

Wow Homie, you breathed new life into me with this great video. Just before watching yours, I watched one that required manipulating the car computer with some complicated gizzmo before changing the rear pads. Afterward, I said, this ain't for me! Then and there I realized I was going to have to let the dealer put me in the poor house on this one. Then out of the dark sky came a bright light ... YOU!! ...🙏🏻🙏🏻🙏🏻 Thank You Homie.

[@phoenixrider4004]

will this allow me to roll car into garage with no power as engine won't turn over and handbrake stopping it

[@bobofficer9608]

Cheers Hektor!, done this on my daughters Audi tt mk3 roadster, worked perfectly, saved a fortune!

[@kimbird6554]

electric handbrake. a waste of technology just more to go wrong ,

[@Icanfixstuff]

How you expect the rich getting richer

[@davidsands646]

yep, just as people said about electic windows, power steering, central locking....

[@AmigaA-or2hj]

That’s why I prefer old cars. They’ll give you a good workout. Everything mechanical and no computer rubbish!

[@fractalofgod6324]

Plenty goes wrong with a mechanical hand brake

[@JimGriffOne]

@@davidsands646 I still have to replace things on all of those electronic systems. I've never been asked to replace mechanical components on mechanical systems, no matter how many times I've worked on older cars. They're more robust than electronically-controlled systems.

[@GBow503]

This worked! My coworker thought he was going to lose his job because the only known remedy was to pay $900 for a new caliper. This is a guy with five kids and a sick wife struggling to live month to month. I found your video, and we took a chance. I don’t know how to thank you other than to say Thank you!

[@phoenixrider4004]

will this method allow me to roll car into garage with no power as engine won't turn over and E handbrake stopping it from rolling

[@leonhill6800]

My mate changed the front pads on his Golf and said he needs to take it to a garage to have the rears done. But after watching your amazing video, I can show him how to do it himself. Really glad there are 'Cool Dudes' like you, uploading brill 'How to' vids. Hektor will/can this same method apply to other makes of vehicles, eg. Jaguar,Audi, Mercedes, etc,etc, also???.

[@phoenixrider4004]

will this method allow me to roll car into garage with no power as engine won't turn over and E handbrake stopping it from rolling

[@Jfitzroy1]

I just did my Accord rear brakes with electronic parking brake. I just screwed the piston in with a brake tool until it stops, then press the piston the rest of the way with a c-clamp.

[@popollo22]

Glad this video popped up while I was searching for the cheapest tool to retract the brakes!

[@elsequitoelsen4779]

Is there anyone hear the 'aaooahhh' like porn sound

[@350kicker]

Yeah i did heard it..😂

[@350kicker]

Never mind it the sound of the motor at 4:58🤔😆

[@kmuinde]

Yeah when he said push it in lol

[@vukojeskocajic4804]

you are going to hell dude :D

[@rightwingtrashrus274]

Its his child playing in the background you prick......

[@abelchbros]

Thanks Hektor, I just did mine on a passat 2006, worked out pretty good. (I used as a power source my 20v power drill battery. Work just fine.) 👍🏻👍🏻

[@HomieHektor]

A. Villalobos That’s awesome, I’m gonna try that one day 👍🏼

[@m88works]

You should actually use OBDII software to release the parking brake(VCDS or smh), because after replacement you need to adapt your parking brake motors so they know the distance between the rotor and your new brake pads. 9 times out of 10 nothing bad will happen, but there is always that 1 time when you f*ck up your brakes, they overheat, and you end up with a costly mess :)

[@isaaci7196]

What's a good obd2 tool for a Honda HRV?

[@Halibrand]

These brake calipers will relearn their position and calibrate themself when you push the park brake button. However the older style brake calipers on VW's and Audi's need their position to be set with VAGcom or another diag tool, you have to put the new brake pad thickness in and also do a calibration with the software. If not done properly there is usaly a permanent fault code set regarding power loss or torque fault, And the only way to erase it is by coding in vcds and doing adaptations in a certain way, however i have found that its 50/50 it will work or not, sometimes the calipers wont accept it and needs replacing. A couple of years ago i had atleast one car a week towed to my shop with this problem, ive lost count on how many calipers ive replaced but it must be in the 50-80s. Its not fun when the calipers cost 400$ each + labour cost. Same thing goes with newer Volvos and Ford Mondeos with electric p brake, i have replaced 20 calipers on them to becouse of people jumping them.

[@bestbuildpc]

The trick works and don't panic. there are several things to do it without VG software.

[@phoenixrider4004]

​@@bestbuildpc will this allow me to roll car into garage with no power as engine won't turn over

[@phoenixrider4004]

​@@Halibrand ​ will this allow me to roll car into garage with no power as engine won't turn over

[@patrickjordan7670]

Brilliant tip for us guys with no scanner iv been doing brake for family for over forty years very handy tip 👍👍

[@Aurora..Borealis]

Hektor! You're a legend🙌🏼 Just did your trick on my 2017 hyundai Ioniq..... Worked a treat!! Greetings from Norway where we change brake discs more often than brake pads.... 😂😂😂🇳🇴🇳🇴🇳🇴

[@EnmandsBand1]

I have the 2018 Ioniq EV and need to do the same procedure, nice to know it works - and hello up ther from Denmark! I guess that means that the car will calibrate the parking brake to the new position by itself? that was my only worry

[@Aurora..Borealis]

@@EnmandsBand1 hei Jim, yes the car does it. After I finished the job and plugged in the cables again I switched on and 'set' the handbrake on and off a few times. That was it, piece of cake! Lykke til!

[@EnmandsBand1]

@@Aurora..Borealis thank you, great!

[@Alexou331Productions130602]

Saved me a trip to the dealer! I used a 12v battery charger from Canadian Tire and it worked perfectly! Rear brakes on a 2019 Jetta.

[@narutorasengan162]

I also was able to get the job done with a 9v battery and some wires. Thanks for saving me a lot of money!

[@xforce687]

Pretty cool tip in case you don't have the caliper compressor kit with plates that fit into the piston grooves and rotate/compress at the same time.

[@phoenixrider4004]

will this allow me to roll car into garage with no power as engine won't turn over and handbrake stopping it

[@Luxlumen1234]

Thank you, I thought -until now- it's much complicated! Keep discovering and Best Regards ....

[@HomieHektor]

Alex Rist thanks for subscribing, appreciate it. Stay tuned for more videos 😎

[@turbowank16v]

Man.this is really awesome help.i do all my own mechanical work and also for paying family and friends.recently ive worrying about how to do this because a few family members have bought vw golfs and tiguans with e parking.cant believe how easy this is.

[@NewShockerGuy]

Thank you for this! Just did this for my friend's audi, retracted it no problem. I guess a dumb question. If you retract it all the way how does the car know to extend it so that it touches the rotor now? Would you have to go the opposite way just a little so that it makes contact with the rotor? IE: How does pumping the brake affect the actual motorized parking brake? Sorry if that's a silly question, i just want to make sure I understand.

[@bwdz75]

You should have also set the caliper with the notches correctly so it engages the dimple on the back of the pad. Anyone that does this, do it at your own risk as without using a diag tool that can put the brake in service mode you may not be able to get it to work right after for a variety of issues that take too long to explain just be warned of how many people have done this and ended up having to replace the calipers and recode with VCDS

[@mtalou]

Thank you Hector for a fine video. I just put a 7 amp inline fuse on the positive wire just to be safe. You saved me a lot of money.

[@phoenixrider4004]

will this allow me to roll car into garage with no power as engine won't turn over

[@user-ot2pe2lh7j]

@HomieHektor Great video. After hours of trying to manually turn the pistons and giving up. Found your video and finished the job with no issues. Keep up the great work! We need more mechanics that work on the euro stuff!

[@vinhha6073]

Some of them we do not need to push back... after wired it push back it self... but yes scan tool still the right way to do it and reactivate it... good job buddy...

[@HomieHektor]

Vinh Ha thanks Homie, thanks for subscribing 🤙🏼

[@robvanname6867]

Thanks for posting this video. I've got two cars with electronic parking brake that I have to work on and this makes it easy.

[@JackKing12.]

Nice clean caliper...mine is all rusty so too is the hub. I think it must be the cheap cleaning solution the car wash place uses...

[@HarborLockRoad]

I no longer use the parking brake button or hill hold feature on my cc, when parked and off, just leave it in gear ( yes i have the manual 6 speed.) Simply 3m double side tape a cover over the buttons so you dont forget, comes off easy too if needed.

[@EnmandsBand1]

Best EPB video on KZbin - finally an explanation and demo you can understand, thanks a lot I will try it soon on my Hyundai Ioniq EV, these EV's need a lot of brake service because they use the brakes so little, sounds really stupid but it's true...

[@themechanicla994]

Best Tip Ever! Every mechanic needs to see this!

[@HomieHektor]

The MechanicLA it’s just a matter of sharing the video and making it semi viral 🙌🏼

[@jerrydonnan8665]

Many thanks Hektor for a great tip and helpful video, from two guys in Scotland, who have just successfully serviced the rear brakes on a 2012 VW Tiguan. Great help Hektor!

[@sgtzsquad]

Great video. I saw this technique mentioned in one video in the comments. Glad I could see it. Thanks.

[@HomieHektor]

🤝

[@sergiovelazquez579]

Buen Tip !! Esos cables tienes que patentarlos y venderselos a Snap On

[@HomieHektor]

A Huevo Sergio hay que hacer que Snap-On trabaje para nosotros 😎 Al Millon 🤙🏼

[@fuzzy6396]

😂😂😂😂😂😂

[@stevewilliams6667]

Excellent clear video on how to do it.Best on youtube. Thanks

[@MrLutzyboy]

Hektor! Thank you. You are one of the best Mechanic/Technician to learn from.

[@kitchencasas9888]

Thanks a Million!!!! I used my Milwaukee 12V battery and worked Excellent !!!!

[@cc-iq2bs]

Awesome, finally a down to earth guy, who knows, your God send brother 👌💪🤘

[@stevelewis3425]

Awesome Hektor. One of the best and easiest explanations to follow.

[@richard7408]

My Festivas don't have electric parking brakes. They don't even run OBD2. I park the car in 1st gear and all is well. I was curious when l came across this video. I clicked on it and now im a subscriber. Excellent video, well explained and im sure i will retain this knowledge because i do some repairs for friends that drive cars a bit more sophisticated than my old Festivas.

[@richard7408]

I'm

[@andresfernandez6953]

This video needs way more views and likes.

[@charltonconnor3328]

Very good info...simple but Not simple if u dont know Thanks a bunch or muchos gracias

[@HomieHektor]

charlton connor 👍🏼

[@semiz6r]

Definitely a cool cheat. Thanks bro! Tried it today on 15 Subaru Outback. Worked perfectly like you said

[@phoenixrider4004]

will this allow me to roll car into garage with no power as engine won't turn over and handbrake stopping it

[@PeaceChanel]

Thank You for All that you are doing for our Planet Earth.... Peace.. Shalom.. Salam.. Namaste 🙏🏻 😊 🌈 ✌ ☮ ❤

[@raicerx469]

DAAG, that is easy. Damn Dealers !!! All these special tools they say you need so they can charge you the BIG $$$$'s. Thanks Hector, I'm sure you saved some Peeps their butts.

[@kell43jk]

Great quick and easy to follow video.

[@jhettiarachchi]

Hi Please explain why and when we need to do this adjustment? Thanks

[@stevenmack9948]

Changing brake pads, new ones are thicker so piston needs to retract so pads will fit.

[@martinchan6452]

Fabulous. Thanks for the detail. 1. Why does the piston do it in the first place 2. Will it do it again. Is the mechanism faulty.

[@bosshoss14]

this is basically the manual way to do it. You can also put them in service mode with a scanner that does the same thing, but not everyone has one so this is an alternative way.

[@123blkmike]

Thanks Bro... Audi South Atlanta customers service and shop sucks, hwy robbery. Thanks again!

[@RingZero]

Fantastic video, need to do my Touareg rear brakes. You just gave me enough confidence to get the job done, thank you.

[@phoenixrider4004]

will this allow me to roll car into garage with no power as engine won't turn over and handbrake stopping it

[@tonistarks2874]

Bro, what a dope video! Thank u so much. i was having trouble with this doin it the service mode way .this method is so much easier 👍🏽thank u homie

[@GTI_CHHA]

You should use VCDS to reset the caliper.... Much safer

[@leeoneil2852]

Your tip worked perfectly. Thanks and keep them coming. Respect from Yorkshire, England.

[@phoenixrider4004]

hi lee, also fellow Yorkshire man. will this allow me to roll car into garage with no power as engine won't turn over and handbrake stopping it

[@pancellorum1]

Whats your problem mate, with keep asking if you can push your bloody car into the garage?@@phoenixrider4004

[@coyotecustoms1316]

thanks homie i usually pass on them since i had no scanner thanks again you taught this old wrencha new trick👍👍👍👍

[@phoenixrider4004]

will this method allow me to roll car into garage with no power as engine won't turn over and E handbrake stopping it from rolling

[@gilgonzalez5902]

Is it possible to adjust the electronic parking brake? My rear pads are low and my parking brake doesnt seem to be holding too well, maybe getting new pads will fix it but not sure. This is my first electronic parking brake and i want it to be nice and tight like my old hand brakes where that i could adjust in my older cars.

[@ChriswaltWW]

My Citroen C4 Picasso has a release under the driver seat, you just need to turn clockwise with a special key to retract it manually, very fast and easy

[@bryanpacheco4645]

This is like a cheat code in life

[@leongwarren4386]

hi I’m leong from Malaysia today my My colleague See ur vlog finally broken the epb hope ur next video will take good care

[@paulmolnar869]

Very smart I like your idea. I may even use it sometime! Another way is to just use Channel Lock pliers and just screw it in from the outside,.

[@noscopeguy3789]

4:45 who moaned there?

[@Sebastian.12]

NOSCOPE GUY lol

[@350kicker]

The motor when it retract at4:58😂

[@zadeanrobinson1608]

I think that edit was deliberate when he said he gotta push it in 🤣🤣🤣

[@rightwingtrashrus274]

It’s his kid playing in the background you dick...

[@KiiingChaos]

I thought I was the only one! 😄

[@jatinshetty]

The hero we needed!!

[@HomieHektor]

Jatin Shetty Thanks 🙏🏼 Homie

[@EPIKISOOL]

you can just take off the actuator (2 bolts ~3 bolts) and spin it clockwise

[@HomieHektor]

DJ Oh that’s another way, 👍🏼

[@bestbuildpc]

that is the other way. Good boy!

[@stanislavjohn6156]

does it need manually spinning the other way on completion or will it set itself etc?

[@EPIKISOOL]

@@stanislavjohn6156 you have to engage and disengage the electronic parking brake couple of times to confirm the job is done.

[@MegaMetinMetin]

D battery works well

[@alangarner4095]

That is the best way that I have seen , no computer ! Fantastic 👍🏻😎👍🏻

[@phoenixrider4004]

will this allow me to roll car into garage with no power as engine won't turn over and handbrake stopping it

[@stephencannon3140]

Of your doing this without air/impact tools.... after removing the lug stud caps loosen the lug studs with a breaker bar. Only a few turns to break the torque. If you forget this step it will probably be the only time. The wheel will spin but lugstud won’t loosen. Remember most European vehicles......the lugnut is not a lug nut. They use Lug Stids in that the support weight of the stud is attached to the nut. Simple summary....lift the car up only as far as necessary to get weight off the tire. Leave the two upper lug studs for last so you have something to support the weight of the tire. They also make Tire Trees for European vehicles for a few bucks on Amazon. This threads in the stud opening and can support the weight of the tire for a few seconds until the regular lugstud gets threaded. As you get the adjacent lugstud installed remove the tire tree and will make tire removal/installation so much easier....especially when doing yourself.

[@JTISingh]

It’s okay your technique,short way fast job I appreciate.

[@jimknight227]

Dude you taught this old goat something new thanks for the info.

[@mtb91295]

Damn homie hectors got his editing skills down foo

[@HomieHektor]

whthrtln HA! Thanks Homie thanks for subscribing 🤙🏼

[@AgusVargas]

3:41 I listen "Chingadera" hahaha or I'm listening bad? como todo buen mexicano xD

[@HomieHektor]

Agus Vargas That’s the chingadera right there Homie, thanks for subscribing 🤙🏼

[@jorge3642]

Exactamente qué estaba diciendo Agus? Yo entré al vídeo por curiosidad porque entendí un poco el título pero no sé qué estaba diciendo...

[@AgusVargas]

@@jorge3642 Ahi está diciendo que va a conectar los caimanes a los cables que metió en donde va el arnés del caliper eléctrico para probar que regrese el pistón del caliper

[@HomieHektor]

Jorge exactamente 👍🏼 pa ponerte el vídeo fácil y simplificado estoy demostrando que con 2 cables que queden en el caliper electrónico, puedes retroceder el pistón simplemente usando tierra y corriente como cualquier motor bipolar (como las ventanas eléctricas) 👍🏼Gracias por mirar

[@ksg7821]

Very well explained. Thank you.

[@rabbaniabrar]

Nice job but Aren't you suppose to mechine rotors to get smooth/better breaking?

[@junkailim4324]

Can I know is it suitable for every model cars?

[@imduntouchable1]

ANDALE!!!!!!! I knew there was a way to do it. I even thought about just putting the car in neutral. just for that Homie. Imma subscribe and give you thumbs up and get notified!!!!! Thanks for the Homie. God Bless!!!!

[@phoenixrider4004]

will this method allow me to roll car into garage with no power as engine won't turn over and E handbrake stopping it from rolling

[@arthurfricchione8119]

New to your channel Hector. Very informative and helpful video. Thanks for sharing and stay safe and well.👍

[@newlifeknow]

I am very impressed on your video. definitely informative. i’m old-school mechanic so this is all new for me I have a 16 Chevy Camaro can I do the same thing In your video

[@kevinjrye]

If it’s a similar system to BMW, which it appears to be, just remove the actuator and wind it back in by hand with a Torx 45 bit. So easy you’ll think you did it wrong.

[@Searchingforanswers]

I have a 2011 cc made in mexico. An hour before leaving back to Canada the car broke down (timing chain). Got tow truck and he parked it. When I went to move it the emergency brake is stuck. How can I get this to work? Is there any way without taking apart the wheel and brakes ?

[@1r2i3c4h]

Can you just raise all 4 tires off the ground start the vehicle (keep it in park or neutral) and release the parking brake place your pads and rotors and pump the brakes?

[@everardocamacho5063]

Una observacion mi hektor, los two notches en el piston no sedan Quedar hacia arriba at 12 o'clock? Porque a veces los pads tienen una pin , espero y me hago entender, gracias, pero contestame homie

[@LuisOrtega-zy3zi]

Por favor porque no explican todo el proceso también en español . Mi pregunta es Ese proceso hay que hacerlo en los 4 pastilleros oh solo en uno . Por favor me pueden explicar gracias

[@djricardodelrio1399]

BRAVO !!!! WELL DONE !!! easy to do and very well explained !!!!

[@unclemarksdiyauto]

Thanks for the tip! Never done one of these with the electronic parking brake!

[@enocortega1013]

Me pregunto si tus cables borran la falla que decteta el auto cuando desconectas el caliper y si también hace el ajuste para calibrar bien los cilindros? Lo bueno es que estas dándoles más trabajos a los mecánicos profesionales gracias sigue haciendo estos tipos de inventos. Saludes

[@HomieHektor]

Te respondo que los cables no borran la falla, otra: esto no causo ninguna falla en el auto y si tuviera una falla pues lo arreglo porque yo soy mecánico profesional 😎 Saludos Homie 👊🏼

[@enocortega1013]

@@HomieHektor ok don "profesional" recomienda mejor que diagnóstico y como usarlo que es lo más sensato que puedes hacer para las personas que de verdad quieren aprender. Y no echar a perder sus autos que cuestan caros y no tienen la oportunidad de estar inventando con los autos de los clientes.

[@HomieHektor]

Enoc Ortega 😎 ya lo intentaste de la manera que estoy enseñando en el vídeo, verdad que no, pero ya quieres hablar mal de los métodos que si funcionan. Además, las personas que tienen un scanner para hacerlo “como se debe” van a usar el scanner. Los que no lo tienen, no lo van a ir a comprar para hacer frenos una ves en su carro. Gracias por tu aportación 👊🏼

[@enocortega1013]

En la época de los 90 cuando los autos muy lujosos empezaron a traer esos sistemas de frenos. esa era una de la operación que todos los mecánicos teníamos que hacer por que una herramienta de diagnóstico para esa época valían casi como un auto comercial. Hoy en día si tienes dinero para comprar en auto con esos sistemas. Claro que tienes 100 doláres para comprar un vagcom o un autocon que cuestan como las pastillas de frenos. Y es súper sencillo de usar. Saludes amigo y latinos por siempre

[@HeadsUP253]

You can also use 9v battery too did u know that?

[@kvmods]

After the installation, what do you need to do? just place the claw with new pads in his place and thats it?

[@HomieHektor]

Pump the brake pedal as you would with hydraulic brakes.

[@monstersquashracing]

Another good video man really enjoying the content keep it coming. Thank you.🤙🏼

[@HomieHektor]

THANKS Monster Squash, I’m just putting in work ⚙️ ⚙️ ⚙️

[@jakepennington8507]

Just hit the parking brake on and off a fww times itll learn its position

[@thorbo]

Hey thank you. I am wondering if there is a "trick" switch somewhere in the car.

[@Mspjiusjitsu1992]

Awesome thanks man exactly what I needed for my 2019 Jetta the caliper I'd exactly like this

[@Okie686]

Did it work great? I ask cause I own a 2018 golf r

[@MaskedGearhead]

So retracting is only needed when you’re about to replace brake pads? Not necessary if you’re going to inspecting brake pads or maybe only to clean and lube guide pins?

[@glennhall7934]

Thanks for putting up some common sense stuff. Well done.

[@samuelgranados776]

Oh well we learn some every day

[@hughie7545]

Hi quick Question , my friends car broke down yesterday. His Electric Handbrake got stuck on so he left the car Is it possible to remove the electric handbrake system and drive it home safely until Repaired? Thanking you.

[@panchosanchez2556]

mi amigo trato de aser esto pero al último quedo flachando, la luz de brekas...que recomiendas??

[@erobles1011]

Great video, nice Job, thanks Do you know how the dis engaged the electric e brake to tow a vehicle?

[@AlejandroHernandez-yx3dc]

Chingon hermano saludos desde Morelos Mexico.

[@HomieHektor]

Saludos, yo vengo de Zacatecas 👍🏼👍🏼

[@AlejandroHernandez-yx3dc]

@@HomieHektor estan excelentes tus videos hermano, hechela ganas que estes bien y tu familia. Yo laboro en una agencia automotriz NISSAN en morelos la verdad son muy informativos tus videos, que estes bien hermano.

[@davorcujic6549]

Is this tool for pressing caliper made from silicone gun (DIY)...i like it

[@KTM-Beta]

Nice tip! Vatos locos forever man! 😉

[@lospolloshermanos2692]

Tres puntos ese!

[@2mparkerson]

Thx Hektor, going to try this on my Audi! What was that sound at 4:45 -- extra fun stuff in your garage?! :)