Repairing a leaky Delta bath or shower faucet-single lever and setting temp...

[@Sunny_B4]

12 years later and you are still helping people with water leaks. Thank you! I will be trying it very soon.

[@marymontgomery3966]

Thank you. You helped this 69 year old lady to do this all by herself. I used a rubber strap wrench for the nut which made it easy.

[@TheOldkid888]

Hello Mary Montgomery, You're welcome! Great job! I am glad everything worked out for you! Congrats on the repair! Thanks for commenting and enjoy your day! Al

[@jeffkersten9777]

I watched many videos about how to repair my faucet. This was the best one. Exactly what I needed.

[@TheOldkid888]

Hello Jeff, Great to hear! Hopefully the repair went well for you! Thanks for commenting and enjoy your week! Al

[@gouncheelz23]

This video is priceless for some of us office dudes that are too cheap to call a plumber. After having a leaky shower faucet for over a year I feel like I can fix this over the weekend. Just have to find the right allen wrench and grab my channel locks out of the tool box. Thanks for sharing your plumbing knowledge.

[@QuangDo-ok8tt]

0:48

[@stringbender11672]

EXCELLENT VIDEO!!! fixed my tub faucet for $5 (plus $3 in gasoline to drive to Lowes) and now....NO MORE LEAK!!!!!! :) THANK YOU!!!!!

[@stringbender11672]

BTW I ONLY BOUGHT THE SPRING & WASHER REPAIR KIT

[@TheOldkid888]

Hello stringbender11672; You are more then welcome and thanks for the kind words! I am glad the repair went well for you! Quite often you can get away with just the springs and washers. Thanks for commenting and have a great week! Al

[@sceedro82]

I wanted to comment and tell you thank you for showing us how to take apart the valve cartridge and replace the seals instead of replacing the entire cartridge because not all of them are available at the home improvement stores and this save me so much time and money not having to call a plumber or wait on a new part to come in the mail I didn’t even know the cartridges came apart till I seen you video. This made you clip much better then the others I watched thank you very much

[@TheOldkid888]

Hello sceedro82, You're welcome! Springs and washers generally resolve the problem. As long as your water is not full of minerals you should have no worries. Thanks for commenting and best of luck with the repair! Al

[@jeffIs47]

Thank you so much for putting your video on KZbin. I fixed my shower leak per your video instructions without a hitch. I would not have know how to get started without your video.

[@TheOldkid888]

Hello Jeff, You're welcome! I am glad everything worked out for you! Congrats on the repair! Thanks for commenting and enjoy your week! Al

[@TEHZEEB75]

I had a delta shower faucet leaking and was able to fix it by watching this video. The cartridge cost 75 $ but at Canadian Tire the springs were about 5$. It put in 2 springs and faucet stopped leaking. Thanks a lot for this video. It was very helpful.

[@knoxdavidson291]

Hey Al; thank you very much for your note here. Your comment about calling Delta for a replacement cartridge saved me over $90!! Thank you Sir!!

[@TheOldkid888]

Hello Knox; You are more then welcome! Always better in your pocket then someone else's. Delta has a very good warranty and have been around for many years. Excellent company! Thanks for commenting and best of luck with the repair! Al

[@megajig]

Thank you for this video. Just saved me a trip to the hardware store and $40. I took apart the faucet as in the video but instead of buying new springs and washers I cleaned the assembly and stretched out the springs slightly by hand. Put it all back together and not 1 drop. Before I had a steady stream of water leaking (not just drops). Again Thank you!

[@scottprice8933]

Great instructions! I fixed my dripping shower head in under an hour. A 4.99 pack of new springs and washers did the trick. Without finding a how to guide I probably would have replaced the whole internal unit.

[@maniacmike56]

Fast forward to 2024, I contacted Delta, actually the website directs you to Masco Canada, and they now state that this is normal wear and tear and no Warranty support. Thank-you for your video, I'll try and get the new springs and rubbers. My faucet is 16 yrs old and looks exactly like the one in your video.

[@TheOldkid888]

Hello maniacmike56, You're welcome! That's good to know. I appreciate the update! Hopefully the job goes well and the springs and rubber inserts work for you! Thanks for commenting and best of luck with the repair! Al

[@maniacmike56]

@@TheOldkid888 Well, it did'nt go well. Stripped the Allen key screw. I took my time and pepared. I put CLR and got it clean, then some penetrating fluid for an hour. I got the screw to move a couple of times, but the top is stripped now. handle is a little bit loose, but oh well.

[@tanpham1975]

You are awesome! Your short video covered so much little details about quick fixes with seal and springs and about lifetime warranty. I watched the video from Delta company and they don't even tell you those stuff. I guess they don't want you to know so they don't have to send you a free replacement parts when they could sell it to you. Thanks again!

[@TheOldkid888]

Hello Tan, You're welcome! I believe they tell it to you when you make the purchase, but if you give them a call they should be able to help you out. I know many hardware stores sell them, but some will give them to you if you ask about warranty. Delta is a good manufacturer. They have been around for decades. Thanks for commenting and best of luck with the repair! Al

[@clmautz]

Great video, thanks! Worked like a charm. I'd emphasize turning the water off first at the house - I didn't, and it was quite a show when I pulled the cartridge out. I was able to contain the flood, but it'd be easy to flood out a room or tub if not prepared. Thanks again.

[@jeffreyburns6075]

Thanks for sharing about turning off the water. I was thinking should. But now I know I should.

[@ronaldjohnson902]

Lol>>>>>power water off

[@smccurdy98]

This video was very helpful. I bought both the entire part for $50 and the spring and washed for $2. Spring and washer worked. Getting refund d on the other. Thx for video.

[@TheOldkid888]

Hello smccurdy98, You're welcome! Nice! I am glad everything worked out for you! Congrats on the repair! Thanks for commenting and enjoy your week! Al

[@prasadmn]

Thanks for the detailed video -- esp for showing where the springs and washers went ....helped me fix our faucet leak. Also for the explanation on the temperature control.

[@TheOldkid888]

Hello Prasad M, You're welcome! I am glad everything worked out for you! Congrats on the repair! Thanks for commenting and have a great week! Al

[@cd7071]

Great video! Very simple and to the point. I also wondered how to adjust the hot water mixture, so thank you for quickly explaining that as well!

[@TheOldkid888]

Hello cd7071, You're welcome! Hopefully it helps with the repair! Thanks for the kind words and enjoy your week! Al

[@pastordensharp7524]

This was the best, most concise, video presentation on this particular task that I have seen. I felt like I knew exactly what to do and I did it. It worked perfectly. Thanks!

[@TheOldkid888]

Hello pastordensharp7524, Glad it was helpful! Great to hear everything worked out for you! And congrats on the repair! Thanks for commenting and enjoy your weekend! Al

[@sonnym9954]

Thank you so much for the tip on calling Delta first for replacement. I was about to but an entire rough valve and remove the cartridge.

[@TheOldkid888]

Hello SonnyM, You're welcome! Hopefully they will send you a replacement at no charge and the repair goes well for you! Thanks for commenting and enjoy your day! Al

[@AngiyT]

Thanks for sharing this video! You don't have a clue how much money you just saved me on my water bill alone! I couldn't figure out how to get the handle off and after I watched this video I see I would have been in big trouble if I hadn't found you very helpful video! Not like a faucet I ever repaired before! Keep up the great work!

[@lonnyking1966]

Thank you for this video, I thought I was gonna have to replace gaskets to get the hot water to be hotter. I did not have to go to the store to purchase parts. Thank you so much for your help.

[@TheOldkid888]

Hello lonnyking1966, You're welcome! So glad everything worked out. Just a matter of moving the plastic sleeves and you are all set! Thanks for commenting and enjoy your week! Al

[@lillithjones993]

Thanks for showing how to set the temperature. I might need to know this 10 years later ☺️

[@TheOldkid888]

Hello Lillith Jones, You're welcome! Never hurts to know new things. I try on a daily basis to do so. Thanks for commenting and enjoy your weekend! Al

[@bjflann6128]

Thank you for your info & help! It saved m a lot of money & being on a fixed income, it was a blessing. All I suggest is for women or older ppl to use "Blaster PB" & to shut the water off before you start. It was great that you showed how to replace the spring in the cartridge. I had some Delta parts & it did the trick! I'm so happy not to see my faucet dripping! I'm sure it took me longer than most but I'm happy I did it myself! Thank you so very much!

[@TheOldkid888]

Hello BJ Flann, You're welcome! Nice to hear everything worked out for you and congrats on the repair! I had annotations on my videos and the first one was shut the water off before doing the repair, but a few years ago KZbin removed all annotations. My apologize on that. I am sure you can do anything if you put your mind to it. Thanks for commenting and enjoy your week! Al

[@ForeTheLord]

Thank you so much for taking the time to make this video!! The steps were clear and made my first time of replacing the seats and springs in a shower faucet easy and leak free :)

[@ratan012]

thank you so much. clear instructions and straight to the point. wonderful job brother, I could fix my leaky faucet just by replacing the springs. saved more than 100 bucks. please post more videos from your expertise. God bless

[@TheOldkid888]

+Ratan Sharma You are more than welcome! Glad everything worked out for you! Stay tuned. Coming very soon! Thanks for commenting and enjoy your day! Al

[@alikholdi5894]

Will fix my leaky faucet tomorrow. You explained it very well.

[@TheOldkid888]

Hello alikholdi5894, Great to hear! I hope you get along well with it! Thanks for commenting and enjoy your day! Al

[@30047alex]

Great advice. I bought the $4 washer kit but it didn't work. So I called based on your advise and they sent me a new one free. Thanks

[@TheOldkid888]

Hello 30047alex, You're welcome! Nice to have that repair made and a free cartridge as well! Thanks for commenting and enjoy your day! Al

[@Jaclyn773]

Thank you for making this video! I really appreciate the added info about the temperature setting gauge ( I didn't even know that existed until i watched your video)! 😌

[@TheOldkid888]

Hello Jaclyn773, You're welcome! Always nice to set the temp on the faucet as it is a great safety feature as well in preventing a serious burn to children should they be getting a shower and turn the handle themselves. Thanks for commenting and enjoy your week! Al

[@KIKARSH1]

Thank you very much. I just called Delta on my 20 year old faucet and they are sending me a new cartridge!

[@TheOldkid888]

Hello Pat, I am glad everything worked out for you with Delta! Nice to get a free cartridge. I would apply a little pebnetrating oil to the allen set screw in the handle while you are waiting for your cartridge to arrive. It will make things easier as far as your repair goes. Thanks for commenting and best of luck with the repair! Al

[@deepestwound]

Thanks so much for uploading this. I was skittish about opening the faucet up but your tutorial really helped. No more suffering with cold water! Thanks again man!

[@kevincameron67]

Thank you for taking the time to make this video-it is AWESOME!!. I rebuilt my Delta shower cartridge in just minutes with no problems with no more leaking for just pennies on the dollar. I am happy, and most importantly, my wife is happy! Thank you!

[@wellshii]

i called delta,awesome tip you saved me a trip and 37 bucks.Thank you sir!!!

[@TheOldkid888]

Hello John; You are more then welcome! Glad I could help! Thanks for commenting and have a great day! Al

[@smokimon]

Just changed my washer and spring due to a leak. Your video really helped! Just wanted to thank you for doing this awesome video and yes no more leaking from shower head!

[@davebrindle8543]

Great job, while searching for repair I watched, another video, it was terrible and the guy was more of a hack than a repairmen, you obviously know your stuff and are out to help everyone

[@xrannie]

Thanks for the video- saved me a bunch. $4.97 repair kit vs. $39 cartridge! Hardest part was digging the packed dirt/mud from the water cut-off @ the water tap!

[@TheOldkid888]

Ann Conner I am glad it went well for you! That can be the hardest part for sure when it comes to making a repair! Bonus side is you will be able to turn the water off if you have an emergency now! Thanks for commenting and have a great week! Al

[@johnmaloney9671]

TheOldkid888 I followed direction exactly but the shower is still dripping. Could it be something else?

[@davemmanc]

I have the and older Delta faucet that doesn't have the cartridge but it does have the same seals. Fixed my problem! Thank you sir!

[@TheOldkid888]

Hello David, You're welcome! I am glad it worked out for you. Congrats on the repair! Thanks for comemnting and enjoy your week! Al

[@cmlosoya]

Thanks so very much for the tip about contacting Delta. The cartridge on my 1700 series shower broke. I went to source the part. At MINIMUM $60. Called Delta. It's on its way, FREE OF CHARGE!

[@TheOldkid888]

Hello Chris; Delta stands behind their product and do warranty their parts. I am glad you are getting yours free of charge. Thanks for commenting and have a great day! Al

[@jayr526]

I have to adjust one of these today. When I replaced the washer, nothing but cold came out. Thank you!

[@TheOldkid888]

Hello Jay, You're welcome! I hope the repair went well for you! Thanks for commenting and enjoy your weekend! Al

[@jayr526]

@@TheOldkid888 I wound up getting a new cartridge and installing it. No drips and lots of hot water. The client was pleased. So was I. I learn primarily visually and by doing. Seeing this happen was a real blessing. I feel like an expert now. Thanx, again.

[@TheOldkid888]

Hello Jay, You're welcome! Can't go wrong with a new cartridge. Generally the biggest problem is removing the set screw on the handle. That depends on the amount of minerals in the water for the most part. So they can be a bit touchy at times. I have had a few put up a good fight, but they eventually lost the battle. Congrats on the repair! Thanks for commenting and have a great week! Al

[@motimenow]

Thanks, your video was helpful. My Delta product is a single handle but the internal threaded insert with four notches had to be removed first. But overall, you have helped us save some money for the replacement parts. Thanks a bunch!

[@TheOldkid888]

Hello motimenow; You are very welcome! Glad things worked out for you and congrats on the repair! Thanks for commenting and have a great day! Al

[@darth2wicked]

Man thanks for this video. I went to Lowe’s and bought the washer and screws, change them and stopped the leaking.

[@TheOldkid888]

Hello darth2wicked, You are welcome! I am glad the repair went well for you! Congrats! Thanks for commenting and enjoy your week! Al

[@darth2wicked]

TheOldkid888 I think there is an issue. After reinstalling everything my shower won't stop running. I think I had to turn off the water all night. Do you know what I may have done wrong?

[@TheOldkid888]

Hello Is the handle in the same spot as before?

[@darth2wicked]

TheOldkid888 yes. I made sure I took pictures before and after. Whether it's on the off position or the on position it just keeps flowing. If I take it all apart and put washers and springs back in, it works as expected, but after turning on and off a few times it's like it looses compression and it sprays out like crazy

[@TheOldkid888]

Are you certain they are delta springs and washers? You want the package or kit to say Delta on it. Compare them to the old ones to make sure if you still have them. Different size springs are used for different faucets. It is generally a simple fix. Remove the old springs and washers, replace and you are all set.

[@kgoff6]

Thanks a ton. i was inserting the front part of the cartrige in first before snapping it to the other half and water would work for a day and then not turn off. for the last 5 days, daily. lol. your video showed me how i installed it wrong.

[@TheOldkid888]

Hello Kenny, You're welcome! I am glad everything worked out for you! Congrats on that! Thanks for commenting and wishing you the best in 2022! Al

[@akbazzi]

Great video! Thanks for the tip about calling Delta to get a warranty replacement of the cartridge. I just did and mine will be here in a few days. Will definitely be referencing this video when it comes time to do the work.

[@donaldthompson7491]

Great description on how to take it apart and repair. Thanks for the help.

[@TheOldkid888]

Hello Donald, You're welcome! Hopefully it helps with any repair you may have. Thanks for the kind words and have a great week! Al

[@cliffali2233]

great video. you helped us so much. the great one has taught us an immense amount of knowledge. this is the way.

[@TheOldkid888]

Hello Cliff Ali, Great to hear! Hopefully the repair goes well for you! Thanks for the kind words and enjoy your week! Al

[@lph2040]

Great video, the statement about using just enough pressure on the wrench and going around is. Great. Struggled for an hour before seeing the video and that was the tip that did it. Thank you.

[@car-lo]

Thanks for the video! Didn't have to buy the whole assembly just the two rubbers and springs. It solved my leaky tub faucet you mentioned.

[@TheOldkid888]

Hello Car-Lo You're welcome! Generally that is all that is needed. I am glad the repair went well for you! Congrats! Thanks for commenting and enjoy your weekend! Al

[@Gimbal]

Thank you! 🤑 First I tried replacing just the washers and springs. Helped, but still dripped. Ended up replacing the whole cartridge.

[@TheOldkid888]

Hello Gimbal, You're welcome! Glad everything worked out for you! Congrats on the repair! The washers and springs generally do the job for me, but occasionally I have to replace the entire cartridge as well. Thanks for commenting and enjoy your week! Al

[@abolit]

Thank you for the video. Hope for most DIYers this trick would work but I was not that lucky - got to call Delta to have them ship the whole thing.

[@TheOldkid888]

Hello Abolit, You're welcome! The full cartridge replacement should repair the leak for you! Hope everything works out well! Thanks for commenting and enjoy your day! Al

[@johnk696]

Thanks, Brotherman. Problem fixed fast and easier than expected due to your video.

[@TheOldkid888]

Hello John, You're welcome! I am glad everything went well for you! Congrats on the repair! Thanks for commenting and enjoy your week! Al

[@dncschmidt]

Thank you! Quick and easy fix that I would not have tried if I had not been able to see it done.

[@TheOldkid888]

Hello Duane Schmidt, You're welcome! Congrats on the repair! Nice to have that project behind you! Thanks for commenting and have a great week! Al

[@haleiwahi27]

Thanks for the information on how to adjust the hot water temp. I was struggling with this one. Good job.

[@buckdzl]

Outstanding video, it helped me tremendously to remove a stuck cartridge. I was able to see from this video, I could use a flat head screwdriver to removed my stuck cartridge by gently prying the back of the cartridge.

[@carmypho]

Great job explaining ! You saved me a service call and high water bills Thank you

[@TheOldkid888]

Hello Chaim Goldberger, Thanks! You're more than welcome! I am glad it went well for you and congrats on the repair! Thanks for commenting and enjoy your day! Al

[@dennisneyman8057]

Many thanks,Al. Calm, concise directions.

[@gooder77]

Thanks for this vid! Helped me with my leaky delta faucet. So easy and quick to do...and inexpensive!

[@TheOldkid888]

Hello Ryan, You're welcome! Glad you got along well with your repair! Congrats! Thanks for commenting and enjoy your weekend! Al

[@HarpreetSanghaCMH]

Thanks very much 🙏... it helped me a great deal. I was able to change the Cartridge myself and save a whole bunch of money.

[@TheOldkid888]

Hello Harpreet Sangha, You're welcome! That's great to hear! Congrats on the repair! Thanks for commenting and enjoy your week! Al

[@jasonnguyen170]

This little kzbin.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.

[@mikecg55]

Thanks so much for this video. I just got through with my showers after watching this. No more drip!

[@Nusman50]

Thank you for the video, I repaired my bath faucet by replacing spring and seats costing only 5$

[@TheOldkid888]

Hello Nasir Usman, You're welcome! Glad everything worked out for you! Nice to have that repair behind you no doubt! Congrats on the repair! Thanks for commenting and enjoy your weekend!

[@eh270]

Thanks, this tutorial video inspired me to attempt to fix it myself, which I did -- and saved $450 (the plumber's estimate for parts and labor to replace the valve).

[@TheOldkid888]

Hello rose; I have had a problem like this once as the new cartridge was not in good order. I would take it apart like I showed in the video and check to see if the springs and washers are in good conditon. Could be a factory default. Wish I was there to help. Please let me know how you got along. Al

[@chiefentrepreneur]

Outstanding video. Much better and more detailed than any other on youtube. Thanks for making it easy.

[@TheOldkid888]

Hello Mushki12345; So did you replace the cartridge or did you replace the springs and washers? Sometimes the entire cartridge has to be replaced do to water conditions. Where the washer meets the metal to make a tight seal; the metal may break down just enough to cause a leak. If this is the case then you should replace the entire cartridge. Thanks for commenting and let me know how you get along! Al

[@TheOldkid888]

Glad I could help. It is not difficult to change the temperature as you can see. Good luck with your project and thanks for your comment.

[@TheOldkid888]

@sharke76 hey sharke; Glad it worked out for you and congrats on the repair!!! Delta makes a good product for sure. Thanks for the comments and have a good weekend!!! Al

[@TheOldkid888]

@Thejaxful Hello; That brass ring is usually the biggest task in repairing this faucet. I would try some CLR or some product like this and apply it several times before trying to remove it again. When removing the ring you must be careful that you do not turn it into an egg shape. Take a wrench and apply pressure around the ring. You may have to try the wrench in perhaps 8 to 10 positons applying pressure each time and hopefully the ring will move for you. Tks 4 commenting and G.L. Al

[@guuday2all]

Wow! Well made video and Great suggestion. I ordered the cartridge for free from Delta :-). Customer service is great!

[@TheOldkid888]

Hello Uday, Thanks! I hope the repair goes well for you! Thanks for commenting and enjoy your week! Al

[@hat3weaver]

Thanks for making/posting this - made the job super easy to do.

[@TheOldkid888]

Hello hat3weaver, You're more than welcome! I am glad the job went well for you! Congrats! Thanks for commenting and enjoy your week! Al

[@jim19283746]

Thank you very much!!! I wanted to learn to make my water hotter and fix any future drips, and this video covered it all. Very thorough and clear explanation! Thanks again!

[@TheOldkid888]

@BreezyThaCoolKid Hello Breezy; There is no such thing as a stupid question. You must turn your water off whenever working to repair any leaky faucet. Thanks for your comments and best of luck with your repair!!! Al

[@consentingband001]

Thank You for the very informative video. I'm sure you've saved a lot of people a lot of grief....myself included.

[@TheOldkid888]

Hello Leon; You are more then welcome and thanks for the kind words! That is the nice part about youtube; passing on experience. It is a great learning tool! Thank for commenting and congrats on the repair! Al

[@tabauknight]

Very simple, you did a very good job. Thanks for creating this video.

[@robbiereider1790]

Thanks for a quick and simple "how to" video!

[@TheOldkid888]

Hello Robbie, You're welcome! Best of luck with the repair! Thanks for commenting and enjoy your weekend! Al

[@TheOldkid888]

Hello pinkbow888; Sorry for the late reply; The allen screw has to be tightened more on the stem of the cartridge. I hope by now you have it in operation. Thanks for commenting and enjoy your day! Al

[@TheOldkid888]

@TheNumbrman Hello there; This is a 1400 series faucet. The cartridges that are made for these faucets sometimes are not the same color as you have in your faucet. Don't panic;it will fit .These cartridges are free at some stores. Usually the cups and springs take care of any leaks. Sometimes the stainless steel that these rubber cup washers meet up against may have a little mineral build up and must be cleaned.One thing to make sure is that you put in the correct length of springs Good luck! Al

[@1JasonBradly]

WOW, and it is just that easy. The repair took 3 minutes at best. Thank you for the walk through.

[@TheOldkid888]

Hello 1JasonBradly; You are more then welcome! I am glad you got along well with the repair! Thanks for commenting and congrats on the repair! Enjoy your weekend! Al

[@TheOldkid888]

@outoworkdreamer hey Mike; Thanks very much. I was tryimg to cover every part of the faucet. I hope I have achieved that. Just trying to make the average homeowner see the entire repair. Thanks again for commmenting and have a great day!!! Al

[@TheOldkid888]

@LittleRedHen123 Hello; Usually there is a shut-off in your house or apartment that will turn the water off to the dwelling. If not you will have to go the street, but I would say there is one somewhere inside the building that will turn the water off to the entire place. Most shower and bath faucets do not have seperate shut-offs for them; so I usually have to turn the water off to the building. Best of luck and thanks for commenting!!! Al

[@TheOldkid888]

Hello victor; I have added an annotation about turning the water off before you start the repair! Sorry about that! Hope it didn't create to much havic for you! Thanks for commenting and have a great week! Al

[@TheOldkid888]

Hello Kevin; Glad to hear it worked out for you! New springs and washers will stop the leak almost 100% of the time! The saying in life for a married man; ``A happy wife is a happy life``! Thanks for commenting and congrats on the repair! Al

[@Neptune730]

Thanks for the vid. It helped me remember how it came apart to clean out the sand that got in there from a leaking pipe. 110 gals./Hour.

[@TheOldkid888]

Hello Neptune730, You are more than welcome! That's what I would call a seriously leaking pipe. Glad you were able to make the repair! Sand can cause serious problems. Make sure you purge the lines well! A good place to do that is an outside hose bib. Let it run for a bit. Thanks for commenting and enjoy your weekend! Al

[@TheOldkid888]

Hello John; You are more then welcome! Glad it helped you out! Congrats on your repair! Thanks for commenting and have a great week! Al

[@TheOldkid888]

Hello megajig; The springs are the most important part in the repair! Stretching them will definitely make a tight seal! They may go back to normal tension in the not to distant future, but you can easily install new springs and washers! Thanks for commenting and congrats on your repair! Al

[@TheOldkid888]

Hello Jwade2000; Thanks you! You are more then welcome! Congrats on the repairs! Thanks for commenting and enjoy your day! Al

[@Stretch1Freddy]

Great video. Thanks for keeping it simple and great camera work too. One of the best DIY video out there!

[@TheOldkid888]

Hello Kit Ng; If you turn the main water off to the house then you do not have to turn the hot water off. By turning the cold main line feeding the house off; this stops any water from entering the building! To be on the safe side you should always turn the hot and cold on in the basin (sink) just to make sure! Thanks for commenting and best of luck with the repair! Al

[@TheOldkid888]

@MrLuvmuff Hello; I have to say this isn't the first time I have heard this. A good friend of mine lives out west and I told him to go with moen in his new home. The plumber talked him into Delta and he has a shower valve that leaked within the first year as well; not to say Moen would not, I just haven't seen it yet. It is a little project to repair. You should find out what wholesaler sells delta and ask for a free cartridge. Shouldn't be a problem. Thanks for commenting and G.L.!!! Al

[@TheOldkid888]

Hello chiefentrepreneur; Thanks very much for the kind words. I am very happy it may everything clear for you. I like keeping it as simple as possible and add every annotation that I can think of. Thanks again and enjoy your week! Al

[@sundberg39]

This save me a lot of time. Very informative and useful. Many thanks

[@TheOldkid888]

@ultimouomo11 Hello there;You must be talking about the set screw in the handle.The screw is stainless steel.It is very hard to drill / not to say it can't be.If you have not stripped the screw with the allen wrench; take some penetrating oil or nut and bolt loosener and give the screw a spray.If I was going to do it;I would shut the water off in the night before bedtime and turn the handle so that the screw is straight up and let it soak overnight. The screw should come out in the morning.

[@deeyabain3567]

This was very helpful to my family and allowed us to fix a leak. Thanks!

[@TheOldkid888]

Hello Deeya; You are more then welcome! Congrats on the repair! Thanks for commenting and have a great day! Al

[@TheOldkid888]

Hello Eric; If for some reason either the hot or cold water is blocked the faucet will not operate.You wouldn't have the water turned off in any other pert of the house by chance. I hope this helps. Let me know how you get along. Al

[@TheOldkid888]

@bigzacque Hello Big; It is possible you have a blockage, but highly unlikely. If you have hot water coming to the sinks then it is more then likely your faucet. It may just be a matter of moving the adjustment sleeve on the faucet itself ( it is the one that controls your water temperature). It is shown in the video near the end where I am moving it to a few notches. This maybe your only problem and I would say there is a good chance of this. Thanks for commenting and best of luck!!! Al

[@allochica]

Woohoo! Thanks for your help. I was able to get the peice out and I replaced the cartridge and it works great ☺

[@TheOldkid888]

+Allo Chica You are more than welcome! Glad everything worked out for you! Thanks for commenting and have a great week! Al

[@TheOldkid888]

Hello karma tibet; The handle is held on with an allen screw on the backside of the handle. If you reach around the handle you will find a small hole where a stainless steel set screw is located. This is how the handle is removed. You will need a 1/8th allen wrench and turn the wrench counterclockwise. Once you have backed the set screw off the handle should come off. Occasionally it gives a little battle, but most times it comes off without a fight. Tks 4 commenting and enjoy your day! Al

[@alzo8391]

Awesome video , I just fixed my faucet and for sure it saved me some money, thanks for sharing the video.

[@TheOldkid888]

@Rombizio Hello Rom; If water is coming out of your spout; it is the cartridge that is causing it, if your faucet is shut off. The reason it does not come out of your shower head is your divertor does not have any pressure on it to keep it in place to force the water to your shower head. Repairing or replacing the cartridge will stop the dripping at your spout. Thanks for commenting and good luck with your repair!!! Al

[@TheOldkid888]

Hello Thesoundofamerica; If there are no valves on the faucet and on most bath and shower faucets there isn't; You have to turn the main water off to the house. This will shut-off both the hot and the cold and you will be able to work on the faucet with no worries of water. Thanks for commenting and enjoy your day! Al

[@TheOldkid888]

@WolfBeretta Hello Wolf; I have never had a problem getting the cartridge myself, but you bring up an interesting point. Some places may want a receipt for sure. Thanks for commenting and enjoy the weekend! Al

[@TheOldkid888]

Hello jisung101; Yes, I always turn the water off at the main source when I work on bath or shower faucets. Thanks for commenting and have a great week! Al