1JZGTE POWERED LJ HOLDEN TORANA EP 14 - THE SKID FACTORY

[@theskidfactory]

If you've got a spare Dollar please consider helping out Owen's family by donating to their Go Fund Me: www.gofundme.com/f/paying-tribute-to-owen-tarmey

[@Ecosse57]

godspeed, owen, and prayers to your family.

[@bigmuz_pilot]

Done, legends

[@MrLunithy]

Will do.

[@michaelrouw2117]

A sad finish to a great episode.!!😌

[@davidblanck4131]

Wish I had money to contribute. These times have me broke sadly. Much love and sorrow for the family.

[@danburke4935]

Turbo's are great..... what a show

[@thomasleigh5212]

Massive shed with AC and all the bells and whistles, still has 5 dollar flyscreen door from the 80s

[@theskidfactory]

Recycled from the house 15 year ago.

[@roxjeruben]

I made a donation and by doing so I hope we, as a community, will create 4 awesome car enthousiasts with a positive view of this world. Good luck single mom of 4, you can do just like my mom did!

[@chunkyascharged]

"A lot of time and effort for a shit skid!" 😂😂 I fricken love Al!

[@JHamilton791]

Rest In Peace, Owen. Thanks to the fellas for bringing this to our attention. You know where to point the money cannon, boys.

[@dylanaldred6673]

“Rev it to 11 and drop it to “D” for maximum respect.” Needs to be on a shirt

[@cuttsick8333]

Lee's face when it is sitting there running is awesome

[@samjohnson4014]

Lee’s face when It doesn’t skid. Priceless

[@TorqHub]

Heartbreaking news about Owen's passing. No father wants to ever consider leaving their children before watching them grow up. Condolences to the family.

[@garyroberts8428]

Best opening ever.

[@HomeBuiltByJeff]

That bearing removal trick in brilliant. I will store that one away. Thanks.

[@Fatally_ownd]

R.I.P. Owen, touching that you gents would make a shout out, support them guys, get around it!!!

[@slipstream5542]

sincere condolences to your fan and family

[@pablorages1241]

The Snags are back at our Bunnings !

[@gizmoochi]

Do Lee's shorts have a white interior also?

[@optimisePrime79]

Respect to woody for opening up about iced coffee causing digestive issues, I hear ya mate. Like sump oil through a funnel

[@lordcaptain73]

It’s really good of you guys to mention and link that family’s go fund me. Top marks. And the car sounds great too, trying to talk my friend into chucking one of these into his XP, Woodys skid might be the push he needs

[@justjoe7824]

he is the ron swanson of car builiding. "go ahead give him some props!" *head nod*

[@TheFootOfGold]

This was a really fun project to watch. I appreciate you guys posting longer videos, really helped to show how much you all labored on this build. Also, more content more better.

[@JesseTheFoote]

The classic hundy, catches us all once in awhile.

[@2burning2turning]

The energy polarizer. That's classic.

[@jarredbradbury3357]

love learning something new every episode

[@fendel_]

Lee looks so giddy when he gets in the car, so excited! That enginebay is epic. Really looking forward to seeing it get tuned!

[@shaneobrien3736]

Energy polariser 😂

[@HereIsMyOffer]

Brocky is smiling somewhere......

[@scottinWV]

I love watching Australian car shows. Totally different from the same old same old stuff here in the states.

[@lancelaprarie6128]

That dog is absolutely adorable

[@LukeTheJoker]

My Dad taught me the weld on the bearing trick, used it many times since, awesome to see Al use it too.

[@chillybrit2334]

Thanks for the educational bits n bobs of this series Al - matter of fact approach to how to make a line, the difference between fittings and why and when to choose one over another, how to approach modifying a wiring loom (don't be scared you chooch just hack it open and see where it goes). Old rope to you, but really helps the inexperienced get over that first time fear factor. Woody - well done holding the camera, doing some bits to camera and getting your hair cut throughout - stoic action. :D

[@MrShadow13900]

Passenger tail light is out lol, awesome build fellas keep it up guys, thank you

[@Fackler91]

Woohoo! Love this series and all the info you provide on builds. Please keep making these build series

[@linkems]

Another great screech from the screech factory

[@Jakedebod]

Condolences to the family! 💔

[@robertsomerville320]

Nice Work Boys! Lookin' forward to next week... and for God sake someone find us a source for Lemon Squash in Canada.

[@theskidfactory]

It's called Molson's in Canada.

[@tomahoks]

Sick tunes, well done.

[@spotto4l564]

Look at the smile on Lee 😁well done boys👌

[@gymprofessor329]

I love your guys doggo. Reminds me of the hound I grew up with. They make the best old dogs.

[@Weissenschenkel]

Looking forward to watching episode 52!

[@seanyc89]

Fukn love this channel!!!. Keep up the good work fellas.

[@joealex65]

Today on the Skid Factory, Lee does the worst skid ever! 😂😂 All i needed was some good ol' WOOD! 🤣🤣

[@jonwilson6077]

Good tip for the wheel bearings 👍 I used a die grinder and it took forever

[@skymit5519]

You can use an oxy and just heat up 2 or 3 spots on the race. Does the same thing. Shrinks the metal.

[@charlescraig8994]

That intro has been my favorite one so far,just gold!

[@statementleaver8095]

Nailed the outro lads.

[@axeman3d]

Donated. Can't see that picture of the family and not get hit in the feels.

[@azimpetra]

Is it CrimSafe? Yes? Then Its CrimSafe No? if it's not CrimSafe it's not Crim Safe

[@mickrose3799]

Where can I buy a “Schmingyeng” to check my diff pinion angle.

[@vanders9999]

I heard an interesting fact the other day about ford 9 inch oil filling... If you didnt know already apparently it was common practice to put the oil in a plastic bag and put it together like that and after its first spin the bag will break and presto no mess!

[@joshuaafek3267]

Good idea with the security door screen

[@cobalt0110]

@ 24:38, the smile on Lee's face.... That's what it's all about...

[@kareemabdelhady9955]

Al your reactions to every thing woody does or says are hilarious,great project looking forward for the tune

[@BryceStandley]

You measure them we pleasure them 😂😂😂

[@beardbuilds5140]

Woody loves the shaft by the sounds of it 😝😝👌🏻

[@EZDUZT]

Glad to see al a bit more chipper this week . On ya boys 👌 .

[@Denuto]

Its been a while since ive watched a skid factory vid. Ive missed them!

[@yourawesome7127]

Awesome work their Alan an woody see yous next week for the Dino can't wait to what she makes chur thanks

[@1555yodude]

it happens woody just yesterday i was fitting a new seal to my front door and measured marked measured again and cut it 4 inches short

[@bvward]

Should've used a sea lion... They're longer.

[@LOOPRUNBUNKER]

@2:52 the hammering is in time with the music perfectly

[@atticusbastow330]

Al auditioning to be the new TSF in-house drummer at 2:52

[@nathanpeachs2704]

Sick build, so far 😄 props boys!

[@bishoyibrahim5718]

The car has done as much idling as it has done burnout, I love it!

[@arisuva9629]

you HAVE to get into the hoonigan's build battle... youd rule hard there!

[@JosephClatterbuck]

Perfect timing on a Tuesday evening!

[@PHUSII]

Turbo Yoda doing the "ok" sign and revving a newly built turbo engine with a bear in the other hand = priceless!

[@chaseweeks2708]

ooooh, I'll have to keep the radiator guard idea in mind in the future. That's awesome. Hell, might even consider that for the front just to hide everything.

[@kennethsmith3260]

that was definitely a disappointing skid but man it was good to hear it start. there's always that worry when first kicking it over.

[@craigstuart4537]

LJ sounds sick boy

[@patrickfrankham4600]

Keen for the cummins patrol 👌🏽

[@tuffstreetcars3245]

I saw a lj torana at school today with a big v8 and i screamed TORANA!!!!!!!

[@AtreidaeChibiko]

Well, we know what Woody will call his fried chicken shop when he's sick of being on the spanners.

[@theprofessor131]

I always assumed it would be General Woody's Operation Chicken.

[@Tuilaione]

TurboYoda and Woodskids killing it again in the Factory of burnt Rubber....

[@davesogn3329]

My condolences to the wife and kids

[@97MrFluffy]

Definitely need a redemption skid once she's all set and done

[@tdlaustralia7791]

Great stuff. Cool car. Feel sorry for the family at the end.

[@nojabjonny]

Yeah Dave @ Rene St Snack Bar makes wicked Club sangas.. used to get these every friday when i was detailing at a local Panel Shop.

[@glxblrt]

"You can get out first" What an generous offer x]

[@johndamaskopoulos5183]

Quick question. How will the caliper hit the body if it sits inside the wheel and tyre?

[@theskidfactory]

Depends on the wheel offset. It's just a general warning from the manufacturer as the diff width could be anything as it's a custom fitment and it fits 2 different vehicle shapes.

[@elcris18]

Kicking fires and lighting tires!!!!!

[@Guesty12]

Thanks for sharing the go fund me. A Nice thing to do. I popped in $20

[@nicksrt4478]

You aight want to do the top control arm pivot relocation on the torana to get rid of the scrub of the front tyres. They work much better if you drop the top arms inner bolt holes by about 25mm.

[@keatoncreates]

This engine bay is a masterpiece considering whats in it! Everyone sink a squash for the boys, its been a long time coming hahaha

[@xdub101]

Love the sound of the dohc red motor

[@kyalslattery8345]

No tyres no problem , skid the wheel nuts ☝️☝️☝️

[@deerwithnoeyes1417]

It’s ok Woodie we’ve all been attacked by the mystery hundred aka carpenter hundred, guessing it wasn’t the first and won’t be the last. Loving the content keep up the great work

[@philbox4566]

Oh that is a very sweet sounding motor regardless. Singer sewing machine. Zing on Bloke. ;)

[@bigkeg9173]

Condolences to mum and kids

[@2burning2turning]

The burger bar on Thomas street Noosaville. Its the go to burger joint.

[@michaelhardy8828]

I have the same challenger as woody and he is right its super capable. Would love to see a vid series with it. Maybe a 4m swap

[@Ecosse57]

best intro, ever.

[@chrissynen]

2:53 Turboyoda the percussionist 🔨

[@clubsport9334]

So good to hear it fire off. Feel like I've been along for the whole wild ride watchin the vids. Sounds angry!

[@alistairdeignan7843]

Quality intro Al! 😂

[@ashc5728]

:XD the energy polariser :)

[@rockroller1829]

chooch lol another one is jamoke lol great content ... guys thank you !!

[@feenyx6394]

So this fabled mystery 4x4, is it that black Subaru on the other hoist by any chance? Great episode, the shit eating grin on Lee's face when he saw the car running was absolutely priceless. And they say you can't buy happiness!

[@pashakdescilly7517]

Did I see it correctly at 2:57? It looks like the rear brakes have a set of drum shoes inside the 'top hat' of the disc for a parking brake.

[@theskidfactory]

Yes, that is a really common way of making a park brake that actually works.

[@pashakdescilly7517]

@@theskidfactory My memory says you are using Commodore brakes. I didn't know that the Commode had this sort of rear brake. Earliest use of this arrangement I know of is the Porsche 911, or 901 as it was when first introduced.

[@MadmanJnr]

After tuning and auto setting up needs to come back for a redemption skid! 😂

[@crixtus]

Hoonaningans (hooning shenanigans) caught on tape. Priceless.

[@gavhirt9168]

3 to 8 maybe 10 zaps depends on the bearing size. Anything bigger call a service truck w a crane onboard because its gonna suck

[@gixgix457]

I work with mesh like that and you will lose probably half your air flow. We were amazed when we put it over a welding fan in our cone of silence. Ended up taking it off as the mig fumes went through the hole factory.

[@chrisrosie0584]

Hope you're feeling better after your case of Corona..

[@floydthedroid5935]

Well done boys. Another creation leaves the garage...

[@james13914]

I have recently got the power tools you guys use as well you guys use them so I rhough why not cheap and should work alright