Our first build back for more power! - THE SKID FACTORY

Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfac...
Today on The Skid Factory, AL & Woody revisit their first project car that was released on KZbin.
Marks 1970 ZC Ford Fairlane was originally powered by a 302 Windsor but was swapped out for a Toyota 1UZFE V8 accompanied with a T66 Turbo.
It made 450HP at the wheels and has been a very reliable car for almost 3 years until recently when Mark had it painted and it sat at the panel beaters for a few months without being started.
Expecting the worst Mark decided to turn the wick up and throw some new parts at the 1UZFE including some new Rods, Pistons, Kelford Camshafts and a GTW3884 Turbo supplied by our mates at Golebys Parts.
Want to watch the original series? Check it out here!
• The Skid Factory Serie...
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
Facebook Page: / theskidfactory
Instagram: / theskidfactory
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

[@lordmmx1303]

I like how Turbo Yoda learned to speak in front of camera over the years.

[@FREQQLES]

This is the essential service I need.

[@Ward1706]

Alan works from home and he's allowed a guest. He’s fine.

[@michaelbeattie6953]

Love the cut to woody lighting the tyres up. gold.

[@EzraH]

hahah look at al now who remembers how shy he was in the earlier days of mighty car mods

[@K1lostream]

Ezra Hill - what I remember from the early days was the Yoda ice-death stare!

[@myownsite]

@@K1lostream Would that block fit my Honda?

[@prcmechanicalandmedia4681]

Think it was just Moog 😂

[@mongreluc1588]

Needs that second safety turbo

[@if66was99]

Safe-T! For those TED moments.

[@toddmccarter45]

6:28 man the reflection in that paint, the ole panel beaters did a good job

[@asjmpickle]

what that was years ago? damn time flies felt like it was late 2019 you guys started...

[@if66was99]

They were on MCM TV2 before they started their own channel.

[@asjmpickle]

@@if66was99 i know i've been watching from the start just seems like it wasn't long ago

[@if66was99]

@@asjmpickle Time flies! :-p

[@TimmyTechTV]

My Subaru has a Allied sticker on it. Finally had someone in the Seattle area ask if I was a Skid Factory fan. I replied that I'm a fan of anything with Turbo Yoda and gave them the chopped sign. :)

[@SID_666_]

That Kramer portrait on the shed wall 👌🏼 lovin the channel it's now at the top of my KZbin must watch list.

[@i_am_tinny_man_2267]

nugget garage and the skid factory are Australian's top 2 you tube channels

[@brendanrandle]

Clickspring is Aussie as well, not a car channel though

[@michaellatham9737]

What a Beautiful car! Been here since day 1 and some how knew this would eventually be back to get more horse puppies. Hell yes!

[@scottm6018]

Same here dude! Been waiting for this

[@hiblendmedia]

Skid Factory and MCM video releases on the same day are Maaad.

[@Sprintonthehamsterwheel]

Al and Woody are the gold nuggets of this MCm world! But they all are awesome.

[@Beer_Dad1975]

Just want to say thanks for the awesome videos, really makes these tough times a bit easier having stuff like this to watch.

[@magnus.nasmark]

So nice to se the gal back. This has always been a very pretty build.

[@MyBridgestone24]

Awesome to see builds coming around full circle.

[@Chris-yy7qc]

Even on gasoline: Everytime you put your car into storage, make sure the engine is nice and hot (drive > 10 km) before you park it. Once in storage: Never start the cold engine for just a short period, shut it off and store it for a long time afterwards. Even without E85 the condensation happening will damage your engine.

[@robertsawyer2986]

that dam 8 ball gets everywhere

[@thenonoman]

"The boys have come to me yard!" Lol.

[@anthonyspencer3920]

Mid 11’s with something so heavy is bloody awesome 👏👏👏

[@simes007us]

I love that the shop is getting upgraded! It hots as balls in the summer there.

[@mickfbr]

Looks like another great build to watch... I fkn love the outakes... crack up as!

[@StuFletch68]

had a stuck valve in a 308 once, i filled it to the rocker covers with diesel, left it for a week, then left it drained for a day, fixed it! stopped it using oil too

[@BustedGeezerGarage]

You most likely already do it but we were required, back in the day of flex-fuel introduction at Ford, to use full synthetic oil for flex-fuel cars. Engineering reported that the alcohol washed regular oil off the cylinder walls causing cylinder scaring and piston damage. Not surprising to hear it causes valve train damage as well.

[@rexrst]

Brings back the memories of the first episode I watched at the very begining of the channel :D :D . Shout out from Poland!

[@benjamincole9555]

"yeah nah nah nah nah" *Penny drops* Al is fkn Mike Nolan's brother!

[@RussellRobinson77]

Still one of my favourite builds to come from this channel 😁

[@kamerad1985]

Running E10 1:200 with 2 stroke oil here. Works good as topoil and prevents corrosion.

[@JohnSmith-ud9ex]

Thanks for the great entertainment lads ! Hope everyone is safe and well. Here last time you had this in the shop and I`ll be here the next time too ! = )

[@aSinisterKiid]

still looks freaking beautiful. love that color

[@dubCanuck1]

More turbo goodness! Keep on trucking boys!

[@johnsmith-qz4bv]

i remember this car ...still looks amazing

[@seery188]

A length of rope in the plug hole will sort out them stuck valves, has to be on compression stroke though,

[@DanPellegrino486]

Woody never looks the same twice. You couldn't make a wanted poster of this guy if you wanted to. Great video as always guys.

[@paulnorth9107]

Castor oil in the fuel will make it smell super nice

[@darianistead2239]

E85 Milkshake, know the feeling although I have no valves to get stuck lol.. Also the full of E85 catch can.. The joys of cars sitting and firing them up everynow and then..

[@if66was99]

It's funny. When you guys work on these old Aussie Ford and Chevy's I see body lines and chrome pieces that look like 3 or 4 different American cars. But none of the whole cars look exactly like any 1 model of American. Who else sees a Galaxy 500 in those headlight bezels?

[@ibast1]

Yeah Australian Fairlanes were build off the "Canadian" Falcon base but had styling influences from American Fairlanes and Galaxies. The Galaxie would have been too big for the Australian market. Our family car (Falcon and Fairmont) was what you guys called a compact. These early Australian Fairlanes were a luxury compact with a longer bonnet and boot (trunk).

[@tomrobson761]

Haha love the throw back to the backyard paver skid in the cressida 😄🤙

[@neilrevhead9941]

Castor oil That's a blast from the past

[@vladsychev9971]

Love the builds! One of the best channels, keep up the good work!

[@douglasm3310]

I’m stoked

[@ziggassedup]

That's why is a good idea to run some premium thru the Alky system before parking them up for some time...Save a lot of grief with our sprint car back in the day..

[@ingusrudniks3951]

It is possible maybe to relase stuck valve. Put the spark plug in, clock the engine in the way that is possible to fill combostion camber whith stuff from intake port. Mix the kerosene and a strong thinner 50/50 and plus 15% thin engine oil. Fill it up from intake port to be sure its in fluid walves leg. Check to not leak out to piston rings in crank case. Block intake hole whit some robber glove whith filling to close the hole. Thath staff is evaporates fast. Can do the trick.... Love your work..

[@wa.gtrsoul]

When I saw the caramelized Ethanoil I was half expecting a Yaris Hilton type musical montage.

[@mikester1472]

I like the music in this video

[@alpineskiman]

"doesn't sound like me at all"🤣🤣🤣

[@haha_you_dead]

90% I'm here for the build 10% I'm here to see if Woody has another new look 😂🤣👀

[@jessebergunder]

This was the first and favorite. Turned out so clean. Gotta get more power i guess.

[@stuartstratford9543]

beauty beyond my comprehension

[@OriginalMomo]

Overnight parts from Toowoomba! 😂

[@southjerseysound7340]

People ask me why I bother still running duel fuel and this is why. Ethanol can kill a motor if they don't get warm enough to get rid of the moisture and it's tough on injectors too. I stopped having problems with my Typhoon after I added a second small tank for gas. It's not hard to do and before I put the thing away I just flip a switch and use gas for the last few miles.

[@nickthomas2242]

It’s midnight in England but I cannot go to bed now I have to watch.

[@andrewmurray6772]

I love the blue colour on this Fairlane, if ever i wanted a car to be resprayed, it would be this colour :)

[@CobraDBlade]

Going to be paying attention to this one since I've been looking at UZ swapping my A70.

[@chefcamsey1375]

Awesome video guys 👍

[@Tonzeff]

Go the "Friday" references... awesome!!!

[@brilledwards]

Al with the milkshake meme puts a massive smile on my face!!

[@syncrosimon]

Great, something decent to watch 👍👍🇬🇧🇬🇧

[@yousifalsaad5056]

time for a woody's project with that engine....cough cressida cough

[@peterwall737]

I'm in the UK and I love it 😎

[@SigmAnalog]

"M Y M I L K S H A K E S" Good to see the old Fairlane back. Not so good to see the state of the engine, mind, but the paintjob almost makes up for it and the upgrade plans get us the rest of the way.

[@if66was99]

The chrome is GORGEOUS on that thing! Wonder if he had it redone or it's original?

[@DeadReckon]

To be that car looks more mid 60's than 1970, it's crazy the design differences across the world.

[@maxpwr_fpv4987]

Looks like Al talked back to his missus.

[@RhysK94]

Nah Woody would never lay a hand on Al!!!!! ;)

[@maxpwr_fpv4987]

@@RhysK94 Get in line, you can have one too.... hahahaha

[@JohnComeOnMan]

My phone is permanently on silent too, brah. 😎👍

[@ardennielsen3761]

You say one thing I say another. The valve guides need the vacuum from the engine to pull a minimum amount of oil past the seals. Forced induction causes that vacuum effect to be lost... why even bother with putting valve seals in it!

[@twincam16seca]

I like the reference to butterfingers every time. Every time I touch a car it breaks 😂

[@Greboth]

I love Al quotes a meme rather than the actual song.

[@madmick3794]

Hell yes!

[@mattgraham1983]

Yay👍👍😂 I liked that series...

[@jimclarke1108]

Great looking fairlane $$$

[@zZSpeedDemonZz]

at 17:00 what is that picture on the wall hahahah and the case of corona ahah classic

[@johnferronato7321]

Slab of Corona in the background (nice touch)

[@bigal878]

john ferronato heaps better than ‘lemon squash’

[@robywankenobi32]

did you guys use the existing pcv.crankcase ventilation routing? maybe ts not getting flow at idle and light revs, pcv is usually better (and legal) to get positive flow as long as the clean air inlet into the motor is before the turbo inlet

[@STREETCARCULTURE]

Yes fellas 👌🏾🔥

[@slowlearner984]

Newton's 4th law... repairs = upgrades ;-)

[@theskidfactory]

My people.

[@rjl110919581]

thank you for detail video love my diesel turbo engine

[@Imrahil94]

Hey mates! I run my cars daily on E85. I am curious when you say we should oil change more often when running on E85? I change oil every 10-15k kilometers. One is a Chevy LL8 Inline 6 block and the other a Mazda L5 4 cyl. =) Thanks for the amazing work, I learned so much thanks to you guys!

[@dumbwaiter3644]

I want it !!!

[@R1j0hn]

And those cam gears are humongous !

[@odogzero]

yoda, milk shake line, that's what i came here for!

[@coolhandluke1503]

I wonder if port matching would give a significant improvement to flow.

[@MrWilliam.Stewart]

E85 fuel causing some valve guide sticking hey. Sounds like it needs some FUCHS Formula 60 oil. High film strength oil, ideal for engines using methanol and alcohol fuel. It's a bloody good product.

[@dingus153]

Now, I'm no rocket surgeon but I'm fairly sure oil isn't meant to be caramel flavoured

[@Odddit]

went back to watch the original series before this one

[@RussellRobinson77]

Does the plastic 2uz manifold fit the 1uz? I know they fit onto 3uzs fairly easily

[@johnnyk2322]

Yeah. 8 ball 😂🏁👍😎

[@stevenkorezelidis804]

oh dear moment

[@blakeh4691]

Are you able to use the old “valve saver” kits on this application like the old lpg kits had back in the day? Hope this could help.

[@WeldinMike27]

Blake H flash lube upper cylinder lube?

[@floydmayer]

In the piano style tune playing, it sounds like a rattle can being shaken every few beats...

[@tombstone54]

How does everyone here feel about putting a turbo barra in a VS ute?

[@MrThebrownie72]

Barras in everything now becoming the go to for a lower end budget because they so cheap and available

[@craigmandall9420]

What does it matter what other people think. You build your car for you. Full boost youtube channel is doing a barra to vs (sedan) at the moment. Might be worth a watch if you're keen

[@timsminigarage]

Tuff mounts make a mount kit into a VS

[@tmmtmm]

Do tuff mounts make a kit to mount a VS to the bottom of a lake? because that's where they belong.

[@edhbmx]

If you do another 1UZ build with the Holley plenum hit me up through the ELATE MFG website, we are already working in a bolt on offering!

[@alexbrown1995]

Castor oil in the fuel = beautiful smell :-)

[@ewingfox6459]

For us it was always Marvel Mystery Oil! Before DPI all my cars were pre-mix :D

[@Whiskeyactual9531]

Sup ya skids, everything doing good on your side of the world. (All things considered)

[@RealsteelNZ]

Just re-watched the original build series to refresh the mind on this beast, and I have a question: you guys fitted the A340 automatic, what are the details on the shift control module you used? I'm putting a 1uz into my fj40 and stuck trying to sort an automatic box for it that's not too electronic, that module looked to be super simple, even a tractor mechanic like me should be able to fit it!

[@theskidfactory]

It uses an MV Automatics controller but you can also make your own. Google A340 shift controller.

[@RealsteelNZ]

@@theskidfactory awesome, thank you for that!

[@JesseDoesHVAC]

Mo Powah babeh

[@mattwilson4629]

Ha Ha Ha, love the 8 Ball at 6:52

[@tastytears2793]

Well, guess i'm not going to sleep anytime soon after all. :p - Totally worth it.

[@Adrianzx]

The milk shakes joke was A+ dad joke

[@Greboth]

Adrian ABG pretty sure he was quoting the meme rather than a joke

[@shaynegadsden]

It's already a custom upper intake manifold so wouldn't it be a better idea to remake that with less angle on the throttle body runner to clear the turbo instead of modifying the body to fit it

[@theskidfactory]

The top half is not a custom made unit, it's a Holley top from their LS and Windsor manifolds.

[@JSxxxxxxx]

It's the curse of the Mo