An AIRBRUSH designed for MINIATURE PAINTERS?! The New H&S Ultra 2024!

[@salmanhamid9911]

I didn't know Lee Mack was a miniature painter, but thank you for this product endorsement. I've been using a Badger Patriot, but I only tend to use it for basic stuff. The fact it's only 100 euros really sold it to me.

[@thestateofplay2023]

Lee Mack the comedian? You mean Warwick or me? I guess we both look a bit like him. 🤣

[@OMGYama]

This video single handedly made me buy this airbrush, can't wait for it to arrive.

[@thestateofplay2023]

Hope you enjoy it!

[@MrJHDK]

People shouldn't underestimate how much trouble it can cause when you miss the hole. Especially if you are being a bit careless and putting it in too quickly or too hard. The tip might never be the same again.

[@thestateofplay2023]

🤣🤣🤣🤣🤣🤣🤣🤣

[@runklestiltskin_2407]

Not to mention, what it can do to the hole

[@The_Bat]

🤣@@runklestiltskin_2407

[@ger5956]

I have one ordered and can’t wait to get my hands on it 😅

[@MrBizteck]

Yep screw that up and NOBODY'S having a good time😂

[@stelstorm5157]

Kudos to you sir you did it again. Making astute analysis with common sense.I too have airbrushed on and off for decades and still to this day honestly it’s a pain in many ways. It’s almost like it hinders you from achieving a simple thing - a nice paint job. With the adjusting, resetting, changing needles , tips this or that cleaning on and on. And I’ve used them all from cheap to ultra expensive- there still the same in most ways.But it’s just a tool and not the be- all of creativity. I hope people realize it’s your mind and hand that are the ultimate tool . You have made your comments very honestly. Why would anyone want to fight and struggle with a hobby? Do I need another airbrush ? No. But this one looks fun- and that’s a huge part of my hobby- having fun. I hope you keep having fun with your hobby.

[@thestateofplay2023]

I know right. In a hundred years airbrush got better but not easier. Not many companies look objectively at their products and change them

[@nathanlovin]

I gotta say, the move to H&S has been a huge game changer for me. I don't hesitate to use it anymore when I sit down to paint. I wouldn't have pulled the trigger either since I already had an Iwata HP, but I took an airbrushing class at the Nova Open that used H&S brushes and was blown away by the difference.

[@thestateofplay2023]

Yes, I do think a lot of other airbrushes assume you’re already an expert. I like H&S for their communicative approach.

[@georgeperez3381]

What website can I order the one he is using. I can’t find it

[@andybillco2424]

@@georgeperez3381 it’s in the video description I think.

[@FarawayPictures]

This looks really good. Thank you.

[@thestateofplay2023]

Thanks Chris, as always!!

[@Anarchy1968]

Great video! Priming is one of my favorite (and most important) part of miniature painting. The engineered collar is amazing and it looks so easy to clean! Thanks so much!!

[@thestateofplay2023]

Yeah it really helps to step up the priming game. More colours, better prime.

[@WilhelmScreamer]

I value this demo in how the thing is actually used

[@thestateofplay2023]

Glad it helped!

[@garbol8751]

This is my first airbrush ever. It's a game changer for me.

[@thestateofplay2023]

It’s cool isn’t it!

[@dan_zehner]

Can't wait for this to arrive! Ordered the Squidmar version and it's going to be a great addition to my painting arsenal!

[@thestateofplay2023]

Cool! Hope it works well for you!!

[@hendersonx]

I bought one after watching this video and your priming video. Anything that reduces the executive functions and barriers to actually start painting I'll try! Can't wait to try it out!

[@thestateofplay2023]

How did you find it?

[@bjf10]

I just picked up an ultra as my first airbrush and primed half a dozen models with it last night. Thanks for the review! I'm loving it so far.

[@thestateofplay2023]

Great news. Glad you’re having fun!

[@ub4hn00b]

Thanks for making this video. Cleaning my cheap and basic airbrush is definitely a pain, and that's a negative driver towards using it. Your breakdown and commentary on this new H&S brush just got them a sale (my order was placed before returning here to comment!). Keep up the great work!

[@thestateofplay2023]

I know the feeling!! Hope it works for you! 👍🏼

[@pgg1888]

Any recommendations on the compressor? Thinking of buying my first airbrush set-up.

[@thestateofplay2023]

I really like Sparmax compressors. Just make sure it has a tank and ideally a moisture trap built in.

[@pgg1888]

Cheers, appreciated!

[@VivaLaJ]

I purchased one of these, myself. Can't wait to get it out of the box and put it through it's paces.

[@thestateofplay2023]

Come back and tell me how you get on. 👍🏼

[@ltGargoyle]

my friends and i just got into using airbrushes this last year and we are constantly running into all these issues. I just sent them you video and will be ordering this brush. i hope they appreciate your endorsement, it will likely get them five new customers.

[@thestateofplay2023]

Thanks! Yes, they did actually contact me and say thank you. Not many brands would do that. 👍🏼

[@wombatcook]

That's the best airbrushing video I've seen. And yes, I did buy the Ultra 2024. This thing is so well made! Thank you for all the great videos.

[@thestateofplay2023]

Thank you! And I’m agree, I hardly use my other brushes now.

[@dwightatnorthernstar1820]

I love it. Question: Why is the cup not highly polished chrome like the Gaahleri brushes? Also what comes in the box besides the brush??? Thanks

[@thestateofplay2023]

It’s only the brush that comes in the box. With 0.45 needle of course. As for chrome, at Gaaheris price point I can’t see it really being chrome. Chrome plating is every expensive. It may look chrome but I’d guess it’ll be a similar plating that will crack and peel off over time.

[@jakobfabijan2748]

Can I use revell enamel colors for this? I read that they can be harmful to airbrushes with rubber seals or O-rings and I was wondering if they are safe to use for this airbrush

[@thestateofplay2023]

Most airbrushes are designed for most paints. O-rings and stuff will wear no matter what you use. You’ll be fine. Airbrushes are pretty solid machines. To be honest you may have a better experience as revel thins nice and smooth. Just remember to use a good mask and a booth as spray enamels is toxic.

[@MarkWidner]

What compressor would you recommend for a beginner to go with the ultra?

[@thestateofplay2023]

Hmm, good question. I’m not a fan of cheap anything tbh as they often break quickly, don’t create enough pressure or are just inferior. Plus, you aren’t a beginner for very long so you’ll end up buying a new one meaning you’ll spend twice. My advice. Buy a good one and learn well. I found Sparmax to be a good shout. As long as it has a tank that refills while you’re spraying you should be good. It’ll look like two tanks on top of each other.

[@ezequielboehler460]

Great vid! Just to be sure, you are priming straight with acrylic using the airbrush, not with a "proper" primer?? Thanks!

[@thestateofplay2023]

Molotow one4all acrylic. Which as a graffiti paint sticks well

[@thealaskanpiper]

Great review. I found this video while researching to replace my Iwata Revolution and decided to pick one up. Can't wait to receive it and give it a go. Thanks

[@thestateofplay2023]

Glad I could help out mate!

[@zauszkiewicz]

Hey I want to order H&S airbrush and apparently I can have infinity and ultra 2024 in same price so which one I should buy?

[@thestateofplay2023]

Oh man, that’s a hard question. Hmm, if you have a lot of experience with airbrushes, get Infinity. If you’re starting out, get Ultra 2024.

[@robin5511]

Thank you very much for this video ! Are Molotov paint good primer for miniature ? Are you using Molotov paint for your gaming miniature ?

[@thestateofplay2023]

I am yes. Molotow paints are for graffiti, so designed for all surfaces, indoor and outdoor, making them great for primer.

[@kudosbudo]

So i've been looking at airbrushes compressors etc. WHat isn't explained on any shop website or anywhere is how do i know whcih fitting or hose from the compressors will fit an airbrush? Are there different fittings? some compressor come with hoses so how would i know which hose will fit when most shops dont actually say which fitting the brushes use. Basically trying to find out exactly what to buy and whats compatible is a bit of a mystery for a uk shopper. I was looking at this brush with a sparmax compressor with a air tank. Actually the one in your link. What hose would i need to make these work together? cheers

[@thestateofplay2023]

If the compressor comes with a hose it’ll fit the compressor. For the brush you’ll need to check with the brand. You can’t help with cheaper brands as they could use almost anything but 1/8″BSP is the most common thread size in the airbrush world, which includes many Brands like Harder & Steenbeck, Iwata and Sparmax . Airbrush Brands like Aerograph, Aztek, Badger, Paasche have unique threads and often need connectors or adaptors to attach to hoses.

[@Chp82]

Excellent price point for the quality you've described. I nearly never bothered watching this vid, saying 'what's the point. I don't have £200+ for a new fancy airbrush' but I do have closer to £90 Been thinking about the Creos 289 for a few weeks now but this is a new contender I think. Cheers!

[@thestateofplay2023]

You’re welcome. On my channel I tend to focus on best for price, best for time or best for quality. I always try balance those 3 things. Sometimes paying a bit more gets a lot more. Sometimes it just doesn’t. 👍🏼

[@Chp82]

@@thestateofplay2023 True. Very true! :)

[@leesweeney8879]

Got mine about 3 weeks ago, so far very pleased. Like the easy clean tip. The cheaper ones seem to clog more often. Do not take apart with cats near :)

[@thestateofplay2023]

As they say, “buy cheap, buy twice”. 🤣

[@uriance88]

THis review makes the decision to add this to the 'next big hobby upgrade' list pretty easy.

[@thestateofplay2023]

Luckily it’s nearly Christmas!

[@PerfectionHunter]

I'm waiting for mine to be delivered. REALLY looking forward to it and to compare it to my Iwata HP-CS. Thank you for this review.

[@thestateofplay2023]

Oh man, come back and tell me how they compare as I’m really interested.

[@WulvenKraft]

Interesting! Was that Molotow Marker Refills you were using?

[@thestateofplay2023]

Yes, Molotow acrylic one4all. Great stuff!

[@WulvenKraft]

@@thestateofplay2023 Nice, that never crossed my mind & have a bunch of that stuff laying about!

[@katchapol]

Is there a general guide on which PSI to use?

[@thestateofplay2023]

Not really because it depends on the thickness of the paint your using and the size of the needle. You just have to experiment.

[@lordbravura]

First of all, thank you for your videos! You really helped me getting started on aibrushes when i had given up on frustration. My Wife ordered me this airbrush, but i do not have the regulator for the pressure. Should i keep the psi on 30-35? I want to reduce the error margin to a minimum. Thank you again for your videos!

[@thestateofplay2023]

If you don’t have a way to regulate pressure on the airbrush I’d probably drop PSI to around 20-25. You’ll just need to be more precise about your paint thinning.

[@lordbravura]

@@thestateofplay2023 Thanks for the reply!

[@matthilton8959]

When you mix the ink with the varnish how much of each do you use? Do you add any thinner to?

[@thestateofplay2023]

I just eyeball it. As both will spray without thinner easily I just stick 50/50 or so. But more or less won’t really matter.

[@grega4450]

Would it work for model cars?

[@thestateofplay2023]

Yeah, I don’t see why not.

[@cleanermonkey]

Great vid. I'm really considering this as my new Airbrush. How fine are the fine lines? Is it worth getting a smaller needle .2-ish? And then what about the settings?

[@thestateofplay2023]

It appears all the needles and nozzles will fit. As for settings…but that’s a hard one as it effectively comes down to personal preferences.

[@Scubasgamecorner]

It only comes with a .45mm needle and nozzle set up. Can you get smaller needles for this like .3mm I can't seem to find any information on this even on there website ?? anyone have info on this?

[@thestateofplay2023]

All the H&S needles and nozzles for infinity, evolution and ultra are interchangeable. 👍🏼

[@quintu5]

Excellent Video! A heart for minipainting airbrushers!!

[@thestateofplay2023]

Thanks!! ❤️

[@PsiBurr]

Good review! Yeah, I tried to change the air valve with the adjustable one but had the same negative result as you

[@thestateofplay2023]

It’s weird isn’t it. A part that should just work, yet doesn’t. I’d guess it’s due to the fact you must push the trigger to pull back - somehow.

[@PsiBurr]

yeah, my thoughts exactly - my air valve hasn't been used previously but I did buy it a year or so ago - somewhat perplexing @@thestateofplay2023

[@RichardThompson-ps1zg]

Hi I have ordered one as my first air brush. Could I ask what compressor would you recommend please? I don’t want to spend a fortune but I also don’t want to have to upgrade in 6 months time. Maybe up to £150 or so? Thanks

[@thestateofplay2023]

Ok, so a not too expensive compressor that’ll not need an upgrade for a good whole. Hmm. I’d probably suggest something like the Sparmax AC-501X. Shop around. You should be able to get one for u set £150. I think Element games and Artis Opus have some in there stores.

[@RichardThompson-ps1zg]

Thank you for the quick response. I will check it out.

[@AndyYoung]

Was pretty much ready to pull the trigger on an H&S Infinity CR+ to replace my Patriot, but after seeing this new Ultra I've got more thinking to do. Thanks for the info.

[@thestateofplay2023]

They’re both great choices. Infinity and this. I guess it depends what you’re planning to do. The needles and nozzles all work with both so yeah, thinking, thinking. I can’t sway you either way. I like both! 👍🏼

[@chrisboger2750]

Thanks for confirming my decision to pull the trigger on the Squidmar version of the H&S Ultra, as an upgrade from my Amazon starter airbrush.

[@thestateofplay2023]

Good choice. Sadly there’s no State of Play ultra. 🤣🤣🤣

[@chrisboger2750]

@@thestateofplay2023 you'll get there.

[@Gloomshimmer]

Is the trigger more responsive than on the old Ultra which sometimes felt like on off? And how do you bought it on your own when its not released yet? Sadly it has the old ungrippy pan trigger

[@thestateofplay2023]

I never used the old Ultra. This one was a bit stiff when I first opened it but a bit of lube solved that.

[@Gloomshimmer]

@@thestateofplay2023 I have the ultra while my brother has the evolution, and the evolution is much more.....detailed across the trigger. Hard to describe as a german. While my ultra is first 1/4 of the way nothing, then a small softspot and then "Open". I changed the trigger to the infinity one, because the triggerbutton of the ultra is to ungrippy for me. Dont get me wrong, the ultra is nice. I think the best starter pistol. I can do everything with it. Its sturdy, easy to clean, easy to disassemble. But it could be a bit more sensible. I will go for the ultra 24 and test it. I can send it back in two weeks, no problem, but i need a second pistol to switch faster and have one for drying. The evolution is a bit expensive for what it does. The only really thing which angers me on the ultra 1.0, the cup nozzle is to short. And they fixed it. Yes.

[@RaveKev]

My only compressor is the Sparmax DC-25XT. Do you think I will have fun with this airbrush compressor combination?

[@thestateofplay2023]

I’m right in thinking it has a preset max pressure of 30psi? Then I don’t see why it won’t work. You might need to grab a cheap hose connector valve to reduce pressure when needed like in my video but yeah, it should do the job.

[@andrewstark1320]

Great review! Still waiting for mine to arrive and I'm super excited to enter the airbrush world with such an amazing beginner friendly tool. One thing I would have liked to see in the video is how to do the bubbleback method with that kind of nozzle. I'm a little afraid to block the airflow with just my hand, I wouldn't want to accidentally touch the needle tip and damage it, is there any clever thing you can use?

[@thestateofplay2023]

You can block the whole end with a pen top. However I don’t recommend blowback. I know loads of people do it but it pushes paint the wrong way in your airbrush. Giving rise to harder cleaning and more problems with internal seals down the line. That’s the bit creators never tell you. Because they can just get a new airbrush. Usually for free. 👍🏼

[@andrewstark1320]

@@thestateofplay2023 I see thanks for the clarification! I guess for starters I'll just stick with the pulse method cleaning that also Warrick shows in the presentation video. Cheers!

[@tzencz]

Nice video! Is there a way to put the brush together _without_ the collar? As in, at some point one should be developing trigger control, right?

[@thestateofplay2023]

Correct. Just turn the collar to full manual control. And it’ll work as normal.

[@Kerafyrm]

Bought it on this recomendation and glad I did. Allowed me to paint my knight army quicly !

[@thestateofplay2023]

Phew! I read that at first expecting bad news towards the end. 😜 Glad that wasn’t the case!

[@bashkaai]

Thank you for the detailed, practical review. I think this, more than any other video I've seen, has convinced me I should get one of these.

[@thestateofplay2023]

Not a problem! Glad it helped

[@nomojo1110]

HAHA. The innuendo is inevitable. Tips, screws, collars, holes, wet and on it goes... Great video. Thankyou ;)

[@thestateofplay2023]

Yeah it’s this entire hobby! Innuendo everywhere! 🤣🤣

[@MentoliptusBanko]

I have a H&S Evolution and at the beginning I was going crazy and thought that I will never use the airbrush. But with some time and practice I came to a point where a paint almost every model with the airbrush. I am reluctant to switch to a new airbrush as I got used to the Evolution....but the more I see this model in use, the more I am tempted to buy and try one.

[@thestateofplay2023]

If you’re already familiar with the evolution then this one should slide into your ecosystem with ease. But being honest, if you’re happy with the airbrush you have and can use it well, no new airbrush will make that much difference. 👍🏼 Always good to have a spare on hand though for when one needs a thorough cleaning.

[@hyosworld109]

I ordered the Squidmar plated one, I think it's actually arriving today! Can't wait to use it!!

[@thestateofplay2023]

I like Squidmar but not sure I wanted to pay more for a decal. 🤣

[@kai_the_shark9044]

This is the first Airbrush that actually makes it seem worth it to get one. Thanks for the great review and video

[@thestateofplay2023]

Yeah, I was very skeptical, until I tried it. But provided you sort and fix other variables it does do what it claims.

[@Prometheus_Williams]

So I purchased an ultra, my first airbrush. I’m just starting so the compressor I have is an Iwata Ninjas jet. I don’t think the psi is more than 15psi… will I still be able to use it?

[@thestateofplay2023]

I’m not sure to be honest. 15psi is quite low, I’d generally recommend not going below 20-25. You might just end up with spatter or clogs.

[@Prometheus_Williams]

@@thestateofplay2023 Thank you so very much. I enjoy the content, honest, and helpful on numerous levels.

[@Medicus1988]

I ordered the one with the squidmar-design and after your video I am even more hyped for when the package arrives later this month. The „designed for beginners“-features made me order ☺️ And you are right @harderairbrush produces great „no bullshit“-tutorials.

[@thestateofplay2023]

Totally!! I hope you enjoy it!!

[@freelancerblitz2579]

i just upgraded to the infinity 2.0, still getting my head around it, think if id seen this video first, i might have tried this,, Well i made my expensive bed i need to lay in it haha, any advice for the infinity?

[@thestateofplay2023]

Advice for the infinity. Yes, keep it really clean. However clean you think, it’s not. 🤣 Big advice is to store it with both the needle and nozzle removed. I’ve got my nozzle stuck twice now “thinking” it was clean. Now I store nozzle out.

[@freelancerblitz2579]

@@thestateofplay2023 thanks for that I’ll definitely do that!

[@SUBzeroY]

Great video, great channel. I catched up on all videos. Do you have some recommendations on Necromunda 3D prints / STL that cost money? It is so diffcult to decide which set is worth it.

[@thestateofplay2023]

Yes, The Dragons Rest stl files. I think I talk about them in the “10+ budget busting options” video near the end. I love the way that set looks

[@robknight87]

The back end not coming out surely makes it difficult to change the needle seal?

[@thestateofplay2023]

Apparently they moved it so it shouldn’t really need changed. They say….

[@robknight87]

If it cant be changed, I would recommend being careful about what solvents are used for cleaning to save on eating away at it. @@thestateofplay2023

[@thestateofplay2023]

So no Xenomorph blood. Got it. None.

[@johnbruce4004]

Great review/analysis with no technical-speak, thanks

[@thestateofplay2023]

Yeah I found technical speak just annoys me. 🤣 I guess a “teachers” job should be to inform easily. 👍🏼

[@seanutsch5145]

What PSI are you running it at?

[@thestateofplay2023]

30-35. In my previous video I explain why. The video with the big EASY thumbnail.

[@pierat7]

Just when I thought I knew what I wanted to ask for for Christmas.

[@thestateofplay2023]

Write the letter to Santa. Put everything you want on it. At least one will turn up! 🤣

[@4535jacks]

After this review, I decided to prerder one but what do I need to connect it to my FD-186 compressor? Does it use the same connection as my cheap fengda and timbertech airbrushes?

[@thestateofplay2023]

I believe it should. The Ultra came with a quick connect already attached like you see in the video. But that just screws off the bottom. Carefully. But to be honest you’d be better buying a cheap quick connect for your existing hose. Amazon do them.👍🏼

[@oil3]

Just arrived in the mail, fingers crossed the wife is happy with it! Only lingering question I have is if you’ve found a way to reliably back flow with this brush? I can pinch with the Infinity & seen folks just cover the tip of the HP-CS.

[@thestateofplay2023]

I never backflow. I mix my paint outside the brush so I can see it. But if you REALLY wanted to do it. Find a pen top that covers the entire tip.

[@Mordraqq]

Click fix button was desastrous on the Infinity ,wrote the Harder Steenbeck support and they sent me a new one without the manufactured issued cuased the infinity click fix button to stuck,I after that had to put some rubber rings at the trigger so it would work and come back smoothly. I really would like to know, if this one new Harder steenbeck airbrush (Ultra airbrush) is the money worth and if they learned something from their mistakes.

[@thestateofplay2023]

Oh I can’t attest to that say. As I’ve never had any issues. I guess all I can say is find someone with one and try it first before you commit. Airbrushes are a bit like cars. Great when they work but no one has a clue when they break down. 🤣

[@Mordraqq]

yeah but in my case it wasnt a break down ,it was a failure of the company, they had manufactured it wrong and addmited, it had nothing to do with what I did ,they were atleast very honest about it and sent me the parts they designed working the right why , cost me nothing ,big ups to their support . @@thestateofplay2023

[@mot0573]

Great review, as always! Is there any way to get the central collar alone and make it work on Evolution model?

[@thestateofplay2023]

Sadly not it’s been engineered into the new Ultra. 😢

[@philgee486]

This is very effective reviewing, once again quite a deep dive to give clear detail on specifically how this airbrush innovates to make airbrushing easier in very practical ways, but it really doesn't feel like a deep dive. Watching it felt more like a chat over a mug of tea and that is solid gold presentation of meaty content. Like the laser cutter it's another high spend item, so to get the point across well enough that more folks will be moved to buy one and thus improve a key part of their hobby experience takes this sort of considered vid quality and I forsee a lot more stuff showing up to be reviewed Great work, gold star

[@thestateofplay2023]

You’re absolutely right. I now have a pile of stuff already I need to review. Most stuff I just say no, but there are a few things that piqued my interest. I like to look at stuff the way I think everyone else will. 👍🏼

[@BouvToTheMax]

Keep up the great job!!! Excellent review and definitely will be looking at them for my first airbrush purchase!!

[@thestateofplay2023]

Cool! thanks!

[@Jeff-rh8mq]

I just bought it today and this video as well as a few others confirmed to me that it was a good purchase...Cheers from Canada.....new sub!

[@thestateofplay2023]

Enjoy your new airbrush!

[@paulburrow5178]

Keep up the great videos. You have an excellent take on our hobby and appreciate how you always bring things back to the user.

[@thestateofplay2023]

Thank you Paul. Really nice thing to say.

[@virrcraft]

Ohh, thank you for new great video. Dmn, I’m not yet used my 1st airbrush and now have to buy a new one 😂… but if serious - great thing. Again - simple and amazing! Now need to find time to start spraying

[@thestateofplay2023]

You’re welcome! Find the time - it’s fun!

[@Curious_Skeptic]

Got one new, waiting to come out. Learning brush washes first.

[@thestateofplay2023]

Cool! Always here if you need anything!

[@Curious_Skeptic]

@@thestateofplay2023 Awesome! Thank you. It's sitting on the shelf in shop. Can't wait to get things up and running. :)

[@hvbarata]

This looks very good indeed... I just bought a regular ultra a couple of months ago, but I think I new what I gone ask to Santa...

[@thestateofplay2023]

Get in quick. I have a habit of causing “out of stock” on this channel. 🤣🤣

[@helenmcclure]

Delighted that this airbrush is getting such good reviews. Saw the advertising spiel I while back and though oh lord another gimmick but ended up so impressed in what I was being shown that I took a chance preordered one. I wish this brush had been around when I first started. When they say you don’t need an expensive brush to start with they are right. This one is looking like a great entry price brush that will help teach you proper trigger technique. I broke the trigger on my 0.4 cheap Chinese brush which I use for the every day jobs & this is its replacement. Thanks for the informative review.

[@thestateofplay2023]

Thanks for watching Helen! Yeah I admit to really loving this brush. Something I never thought I’d say after years of annoying frustrations!

[@NOF4R]

ty for the review it's very helpfull

[@thestateofplay2023]

You’re welcome!

[@Bakroth85]

I've had a couple of ideas recently that needed an airbrush to make work, but haven't been able to get my two cheap ones to comply. This looks like it might solve all of that! Great review.

[@thestateofplay2023]

But cheap, buy twice. What my gran always used to say. Right before buying the cheapest sweets in the shop.🤣

[@tftf60]

I had the same issue with a New h&s pressure valve. I disassembled it at put it handtight back together worked fine after this.

[@thestateofplay2023]

Ok cool! Thanks. Disassembling is probably the only thing I didn’t try. *slaps own brow with stupidity!

[@tftf60]

@@thestateofplay2023 i bought 3 of the at the same time and one had the issue, drove me insane. But I think it was to tight to work.

[@tftf60]

@@thestateofplay2023 did it work?

[@thestateofplay2023]

Sadly no.

[@davidhills7986]

I have a v1 ultra. The button sometimes sticks on with mine. A small bit of lube on the trigger stem works wonders also makes the trigger work smoother for pull back as well.

[@thestateofplay2023]

Oh I lubed it alright. But felt a further double entendre in the video might have been a step too far. 🤣🤣

[@davidhills7986]

@@thestateofplay2023 you might as well have gone balls deep on the double entendres as I think you got nearly all of the possible ones in there. Great video though.

[@thestateofplay2023]

🤣🤣 Noted. Not sure how YT would like it though.

[@marshtiger1]

Thanks for sharing this, I have put off purchasing a H&S airbrush for sometime, I currently use my Iwata which is my work horse airbrush, but want to refine my airbrush skills for more precise painting.

[@thestateofplay2023]

Is it an Iwata Neo? If so this should be a step up. If you’ve got an HP or eclipse then this may make things easier but those are still very good brushes.

[@kevinishki]

Very nice design features

[@thestateofplay2023]

Indeed

[@ernestostrman5147]

I got me 1. I wanted to buy Evo2024 but i havent used airbrush for +20y and i think it would be overkill for my current skill.

[@thestateofplay2023]

I’ve never agreed that there are beginner airbrushes and advanced airbrushes. There’s only airbrushes that work for you, and ones that don’t. 👍🏼

[@Balyrion]

The old ultra is still my daily driver airbrush and this one looks even better. I have the Kyiv Infinity series brush too, and while I love it, I mostly do priming and basecoating and the Ultra is fantastic for that. I only pull out the infinity when I want to do fine detail, although it could do everything I feel less nervous doing something dumb with the Ultra. I am actually tempted to try the new one, just because it is a neat design.

[@thestateofplay2023]

I’m so lazy I have different brushes with different needle sizes. So I can grab the one I want. But this new one really changed my view.

[@Balyrion]

@@thestateofplay2023 I do the same, my Ultra has the larger needle (.5 I think?) and the Infinity has the super fine .2 I believe.

[@deltic5514]

Never had any luck with the mac valve none of my H&S brushes like it. All seem to suffer the stuck down trigger

[@thestateofplay2023]

They work on my infinity and evolution quite well, but the New Ultra.....it's like getting fat whilst wearing a ring - stuck.😂

[@jakobfabijan2748]

8:59 Do you have water in the squeezy bottle or a cleaner?

[@thestateofplay2023]

Plain old tap water. 👍🏼

[@PeachyPixel28]

The biggest barrier to entry is the compressor, but there are *some* really good portable options out there. I even use one with my H&S Evolution

[@thestateofplay2023]

Yes I agree. But you’re right, compressors are becoming smaller, better and more readily available.

[@lutsurugi]

I switched from a cordless compressor to a real one really fast and I'm so glad I did. Totally get the hesitation but there's no reason for it. There are some really cheap, small versions now. Mine isn't even loud!

[@4hedgesfamily]

If I ever buy another airbrush, I'll definitely give this one a look see. My current one is an ancient Testors model that was meant to run off canned air. With some adaptors and a ball valve from Harbor Freight, it now runs off the air compressor in my shop. Yup, I have an airbrush I can blow up a truck tire with! At least until a cow got into the shop and broke the end off the air hose.

[@thestateofplay2023]

Man if you’ve kept that one going for this long. You don’t need an new airbrush, you need a medal! 🤣

[@brianv769]

This does look like a great airbrush. I picked up the H&S Kyiv and love it, I might have to pick up one of these when I can.

[@thestateofplay2023]

Be careful though. You might stop using the other one! 😜

[@brianv769]

@@thestateofplay2023 lol, I still use my Grex, so that one may end up not getting used. My first one was an Iwata HP-CS and it went to the “drawer”. I hated that one. That is when I found the Grex and it kept me in airbrushing. Looked at H&S back then as well.

[@andre-dx4yw]

mine arrived today with the wrong threaded type cup in the box, so frustrating straight away! build quality is superb, i contacted Harder and steenbeck and a new cup was sent out very quickly great customer service!

[@thestateofplay2023]

Oh wow! That’s a mistake and half!!

[@BiggerBrotherGames]

With the rise of budget airbrush brands I've been wondering how the high end brands will stay relevant for modeling/minis where maximum precision isn't necessarily required. It seems like this is H&S's answer, and qute a good one. Lots of genuinely useful features and a competitive price point.

[@thestateofplay2023]

I think your absolutely correct. There had to be an answer. I’d quite like to see what badger and Iwata develop. The Neo wasn’t it. 🤣

[@fleboy8618]

Hey there, really great video! If I can share with you one advice that helped me a lot stop ruining a lot of airbrushes is to always push out the needle in front for cleaning. The dried paint on the needle scratches the needle seal at the back every time slowly damaging it.

[@thestateofplay2023]

Yeah, I usually do but in the video I hadn’t used it yet. Also the new engineering on this thing moved the seals for beginners who pull back, so it’s not as much of an issue. They thought of everything!

[@fleboy8618]

@@thestateofplay2023 wow thats good news

[@The_Bat]

Good review. And yeah, Warwick does seem to try to aid us modellers.

[@thestateofplay2023]

He does indeed! A very nice guy.

[@fernandozavaletabustos205]

Great video!!!

[@gilbertmoreno992]

Great work!

[@thestateofplay2023]

Thanks!

[@Xav1ez]

I LOVE your videos, I've learned so much and have taken to many of your tips, including this one, I have now ordered one of these brushes after getting to know about it from this very video (and then watching several other on it since as well :) ). Just wanted to point out that H&S has released some great vids on this brush and how to switch paints and clean it, may be worth checking out as I picked up some tips there I didn't get from your previous video about it. :)

[@thestateofplay2023]

🤣 Don’t worry. I know Warwick and have spoken to him a few times. Great guy. Great tips!

[@mikebalis9963]

Excellent video

[@thestateofplay2023]

Thank Mike!

[@blacksnapper74]

Thanks for another great video. I like the thought they put into the engineering of their product, but my hands can’t take the top trigger for the amount of time I airbrush. I normally try to do a huge batch at a time, and the last time I used a top trigger, my index finger was number for a couple of days. I use the iwata hand trigger models and find they are much easier. All of your simplifications to how to think about airbrushing really help! I know you were just passing on tips, but I loved the fist and two finger tip.

[@thestateofplay2023]

Yeah that’s why I grabbed the spread flyer. To stop my hand hurting over time.

[@aaronadvani]

Fantastic video thank you

[@thestateofplay2023]

Thanks!!

[@dirigoallagash3464]

I've got a Badger 150, 105 pat and a Sotar 20/20. Pretty much only use the 105. If I was starting over I'd go H&S but these three do everything I need for now. Would like to test drive a H&S someday though. Tips, holes, all that. Cheers.

[@thestateofplay2023]

🤣🤣 I like your style.

[@killiandw]

So I don't understand this I recently purchased the Evolution 2024 CRplus which is the more expensive airbrush. Why didn't they include labeled positions on the CRplus like they did on the Ultra.

[@thestateofplay2023]

The ultra is supposed to be a beginner brush. The evolution is designed for those who know how far to pull back the trigger already. But I know what you mean. It’s such a useful ability to have on an airbrush.

[@alviba85]

Good recommendation! Im loving your content.

[@thestateofplay2023]

Thank you!

[@WarChimp]

Love your videos, informative and very entertaining 😂. If I can figure out where I can airbrush in my house, this is the brush I want to get. You have confirmed everything the marketing sold it on. Even my daughter is keen to try it now.

[@thestateofplay2023]

Hope you find a good place to set it up!

[@TheRoamingbison]

I wish this airbrush had been available when I started learning a couple years back. I bought the older version of the Ultra, with a much too small for noobs 0.15 needle. I fought through way too many clogs and issues along the way and eventually bought a more expensive airbrush before learning that the needle size was my main issue. I wouldn't have needed to buy a more expensive Infinity to deal with my crappy trigger control and would have probably used it a lot more since it wouldn't have been so frustrating.

[@thestateofplay2023]

Yeah that smaller needle thing got me frustrated. I’d just got my paint where I wanted and then had to learn to thin again for a 0.15. 🤣 Good learning exercise though.

[@Vostoceq]

Hi, Im probably asking a really stupid question- I want to upgrade from my cheap Fengda to this bad boy but I dont have quick release on my compresor hose (as I dont need it, I use only one brush at the time). Can I still connect the Ultra to my compresor? Thanks in advance and thanks for great overview video

[@thestateofplay2023]

Not a stupid question at all. The ultra comes with the quick connect screwed on. But it does screw off. Might take some doing as it’s on there pretty tight but it is removable. I’d still recommend a cheap quick connect module from Amazon anyway. They just screw onto your hose. They’re great for just quickly taking off an airbrush for easier flushing and cleaning.

[@Vostoceq]

@@thestateofplay2023 so its just basic 1/8 quick release valve? I might order some as I want to use one of my fengdas for varnishes and priming. Thank you very much, I ordeted the Ultra 👌