I'm doing this for my older 2011 Honda Pilot. I ordered a ball mount specific to my vehicle from Course Motorsports. It clips between the dash panels for a clean look. I HATE mounts you have to stick to the dashboard using double sided tape, or vent mounts, or suction cup mounts. I too was gonna use it with Apple's MagSafe charger but the white would just clash with the black/dark grey interior, so I ordered a black MagSafe charger on Amazon from JSAUX and it comes with a USB C to USB A adapter. It looks just like the Apple MagSafe charger, just in black. I recently added a wireless CarPlay adapter to my car so this is gonna complete the system perfectly.
@TommyLGarage9 ай бұрын
Hope this works for you!!
@shaviswanathan30323 жыл бұрын
Man, this is cheaper than most of the car mount offerings, easy to put together, does "with charging graphic" true 15W, and is slimmer/cleaner than any of them, and that TOZO magnet is significantly stronger than the gigantic/eyesore ESR Halolock. Finally strong magnet, slim/clean (any ball mount you want), 15W charging. Just put one together. Thank you so much!
@TommyLGarage3 жыл бұрын
Glad it helped!
@leojohnwayne14223 жыл бұрын
Any videos on adding more than 1 cigarette outlets? I currently have 1 which I have my dash cam connected
@TommyLGarage3 жыл бұрын
Good call. Let me look into it
@leojohnwayne14223 жыл бұрын
@@TommyLGarage thanks man!! U earned a new subscriber
@KyleJett3 жыл бұрын
I am just confused on how to get the part with the little chrome ball attached. Where can I get that piece? It doesn't look like it is listed in the description. Thanks!
@TommyLGarage3 жыл бұрын
I linked it in the video
@rensduurland41539 ай бұрын
Is the tozo magsafe strong enough for bumps or will the phone fall of
@TommyLGarage9 ай бұрын
Definitely!!!
@hainesy17032 ай бұрын
Hey Tommy, Great vid! Just wanna say I’ve copied your hack to a treat! So I ordered the Renn line RHD M2 ball mount for my F20 and it’s fits like a glove, I routed the cable behind the control panel, and the connector end comes out the little hole for the cup holder light, I didn’t have the light, so works a treat. I disassembled the most recent Renn line mount, removed the little horizontal magnets and used 3M tape to affix the Tozo wireless charger. Mate, it looks amazing, wish you could see the setup! 😁😁😁 thanks again! All the best Jon
@TommyLGarage2 ай бұрын
Wow that’s great Jon!!!
@hainesy17032 ай бұрын
@@TommyLGarage ❤️
@TheCrosx7313 жыл бұрын
Does the MagSafe charger allow CarPlay to connect to your iPhone if it doesn’t have wireless connection
@TommyLGarage3 жыл бұрын
No. It’s just a charger
@PastorVShaw4 ай бұрын
Is there an ExactFit Magnetic Cell Phone Mount that fits a 2022 Subaru Outback? I'd love to find one.
@titan_six5 ай бұрын
How strong is the magnet when you hit bumps in the road? Because the one I had the phone popped off the magnet every time. Best one I’ve found is the Scosche mounts. Hands down best magnet mounts
@TommyLGarage5 ай бұрын
The one I linked is super strong.
@ffung76042 жыл бұрын
Does it charge at 15W?
@TommyLGarage2 жыл бұрын
No it won’t but it will be fast enough
@enriquemartinezdelsobral26612 жыл бұрын
Hi, great vid! Thanks for the info. What cigarette lighter charger are you using? I couldn’t find it in the items you linked Mine doesn’t seem to work with the MagSafe charger. Thanks in advance.
@BlakesGarage3 жыл бұрын
I love it great job!!! That's one accessory that Porsche just has nothing for so I'm glad you figured something out.
@TommyLGarage3 жыл бұрын
Thanks 👍
@arma13933 жыл бұрын
Seems a crappy thing when buying such an expensive car without improvements
@jiapsi82172 жыл бұрын
Does carplay work?
@TommyLGarage2 жыл бұрын
Yes it does
@KnifeHandWoodDesign3 жыл бұрын
Will this also work with apple car play?
@TommyLGarage3 жыл бұрын
Yes but it has no relation. Think of It as just a fancy phone clip.
@fernandocg78592 жыл бұрын
simple and smart! thanks for sharing. 👍
@TommyLGarage2 жыл бұрын
Glad you like it. Thanks for watching !
@agenty36523 жыл бұрын
This looks awesome! I just bought and opened the Apple MagSafe as suggested from your previous hack though. :/ Next rev! Will keep this wireless charger in mind! Thanks!
@TommyLGarage3 жыл бұрын
They will work the same. Just different color
@agenty36523 жыл бұрын
@@TommyLGarage Yeah. I like how the black matches my interior, but I can always change it for the next rev. Good to know there's an aftermarket version that works well!
@kirkthompson97753 жыл бұрын
Will this work for my iphone 11max? I just bought a used audi s5 and would like to do this
@TommyLGarage2 жыл бұрын
Yes it will
@salesaccount36833 жыл бұрын
I had the exact same problem when I upgraded to the exact same phone . Thanks . I know what to do with my redline phone holder now .
@TommyLGarage3 жыл бұрын
Nice !
@C3Motorsport3 жыл бұрын
So...how does it hold up while driving? It looks pretty easy to move around. Wondering if it will go flying off on a hard corner? Otherwise looks like a great solution.
@TommyLGarage3 жыл бұрын
Nope. Zero issues. Stays intact
@claudiagreen33022 жыл бұрын
I tried this setup and was really hopeful it would work. The mount is great but the Tozo MagSafe charger is really bad. It doesn’t hold up a iPhone 13 mini as it falls when you go over bumps. Also have an iPhone 11 Pro with a spigen ring on the back and same thing. Falls off. The charging speed is super slow as well. Very disappointed.
@1StopJeff3 жыл бұрын
Great video. Where did you get the mount that attaches behind the trim panel?
@TommyLGarage3 жыл бұрын
Here you go - worth every penny: bit.ly/3APt1ov
@ramz123453 жыл бұрын
What is the magsafe charger that you used?
@TommyLGarage3 жыл бұрын
I lined it in the description
@ramz123453 жыл бұрын
@@TommyLGarage is it the Tozo wireless charger? Or the magsafe charger? Tried checking the magsafe charger’s link, it brought me to amazon with magsafe charger search results😅 And was the charger magsafe compatible? Or has the genuine magsafe charging?
@ajaydhindsa91703 жыл бұрын
“Phone mount guru” 😂😂😂
@TommyLGarage3 жыл бұрын
Haha
@ajaydhindsa91703 жыл бұрын
@@TommyLGarage I love the channel tommy, I just want to keep seeing great content & congrats on the Porsche.
@MintY_SlotH3 жыл бұрын
Great video but does wireless charger work with android. If not could you tell me which charger recommend for android.
@studiodreamken3 жыл бұрын
Moment makes a magsafe compatible case for a variety of Android phones that you can use with this and any other magsafe (or derivative) accessories! Apple's magsafe charger uses standard Qi wireless charging that almost all Android phones have, but it's the ring of magnets that provides the more unique use case. I'm hoping more companies will create more accessories. There's so many possibilities!
@TommyLGarage2 жыл бұрын
It is only for apple
@studiodreamken2 жыл бұрын
@@TommyLGarage it can work for Android too. You either need a case that has the magnet ring installed in the right place already, or you can install the magnet rings manually. Apple uses the same qi wireless standard that Android has had for years.
@veronicaserrato98273 жыл бұрын
Hi, Tommy I have something similar like you is it OK to leave the cigarette lighter always plugged in? Thank you
@TommyLGarage3 жыл бұрын
Yes. No issue. Keep it plugged in
@veronicaserrato98273 жыл бұрын
@@TommyLGarage thank you
@scoobydumb973 жыл бұрын
I have an iPhone 12 Pro with a otter box symmetry case, do you think this application will work while using my phone case?
@TommyLGarage3 жыл бұрын
yes sir it should
@Varis_R35_GTR3 жыл бұрын
Just what I need. Thank you
@TommyLGarage3 жыл бұрын
Awsome !
@jameaster48463 жыл бұрын
kki
@michaelaronis89083 жыл бұрын
Nicely done. I am looking for similar solution but want to off set the phone to right more so it does not block the PCM screen. Currently I have my iPhone X with metal plate on the back so it sits off center. Did you come across any offset mounts with the same sized ball receiver as the Rennline mount has? (Boxster).
@TommyLGarage3 жыл бұрын
I haven't; but it should be pretty straight forward to fabricate
@spawnymatty3 жыл бұрын
Is the wireless charger the Tozo W6 15w charger?
@BBBYpsi2 жыл бұрын
Does it stay on the mount while driving hitting bumps?
@TommyLGarage2 жыл бұрын
Yes it does. It’s perfect
@MikeDiCiero3 жыл бұрын
how is the charger anchored to the dash ?
@TommyLGarage3 жыл бұрын
I linked it in the description. Rennline mount
@qperator2958 ай бұрын
That’s a Steelie mount correct ? You know you can get the orbiter mount right
@TommyLGarage8 ай бұрын
Yes. Both are good
@huzmohd3 жыл бұрын
Ok the idea is very good but what is the watt charging capacity of this wireless charger?
@TommyLGarage3 жыл бұрын
I believe 8
@jweschler3 жыл бұрын
What’s the difference between this solution and your previous video?
@TommyLGarage3 жыл бұрын
Just a different mount. And it is black as opposed to white
@stevewillloseit79742 жыл бұрын
Hey Tommy! Where did you get the steel ball on your dash to mount it to? I noticed that in your bwm video and was curious.
@TommyLGarage2 жыл бұрын
Linked it in the description for you :)
@JM-nk7xq3 жыл бұрын
Is there a way to get MagSafe to work with apple car play ?
@TommyLGarage3 жыл бұрын
They're independent of one another
@anon85023 жыл бұрын
Is the TOZO with the rubber top better because the grip then is better instead of a glossy top? And which TOZO version do you use? Link does not work for me
@TommyLGarage3 жыл бұрын
Yes it’s rubberized. I updated the link for you now :)
@anon85023 жыл бұрын
@@TommyLGarage once again, legend. Thanks a lot bro 💪🏽
@richrich6852 жыл бұрын
This looks great. I just have one question. Does it hold the phone when you hit a large bump? The roads are bad where I live. Thanks
@TommyLGarage2 жыл бұрын
Thank you and yes it holds the phone very firmly. I absolutely love this mount
@pl57783 жыл бұрын
awesome stuff! would love to see you do an apple car / android auto integration
@TommyLGarage3 жыл бұрын
Hopefully sometime soon
@wednesdaydavis16963 жыл бұрын
Thanks for all the videos but I have a question you may have a hack for lol . So I want a magnetic vent charger for iPhone 12 that I can tilt . I noticed yours tilt but it’s not one for the vent . Please help guru !
@TommyLGarage3 жыл бұрын
The plastic ones I listed in the description will tilt. They’re on a ball.
@reshadstv54193 жыл бұрын
Great video tommy
@TommyLGarage3 жыл бұрын
Thanks!
@azamjunejo3 жыл бұрын
Have you compared this to the actual Apple Magsafe charger? Is the magnet stronger? I have the magsafe charger now and my phone drops off if going on a rough road.
@TommyLGarage3 жыл бұрын
Yes. Magnet is stronger on this one
@claudiagreen33022 жыл бұрын
I tried the TOZO charger and the magnet is hopeless. iPhone keeps falling off on the smallest bumps in the road. The magnet is so weak. So disappointed this didn’t work.
@efthimios3 жыл бұрын
That interior looks so good
@TommyLGarage3 жыл бұрын
Thanks! I agree
@kalcajune3 жыл бұрын
My MagSafe worked perfectly fine on my f30 but I really wanted a black one so I got this one but it’s not charging in my car? It worked fine at home when I did a test but it’s just not doing anything in the car :(
@TommyLGarage3 жыл бұрын
Hhmm strange. Did you blow a fuse? Maybe unit is faulty? Mine works fine
@kalcajune3 жыл бұрын
Just checked to make sure but nope no blown fuses 😔 the MagSafe still works great I’m gonna just have to deal with it for now
@super_hero23 жыл бұрын
@@TommyLGarage How does the MagSafe hold up in the long term? I am worry that the MagSafe will break easily under constant 120 Fahrenheit inside the car.
@Pinkielover2 жыл бұрын
Best mount for the phone while driving is in your glove box,,Turn off the phone and place it in your glove box while driving no phone calls that important
@cboria1483 жыл бұрын
isn't the Rennline mount not listed in your products used in this video link?
@jdc96013 жыл бұрын
Great hack! Question: is the the TOZO charger the exact same size (diameter and depth) as the Apple Magsafe charger? I can't find any specs to confirm. I assume that both have 1 meter length of cord. Correct? Thanks.
@TommyLGarage3 жыл бұрын
It’s a bit bigger.
@markm00003 жыл бұрын
When you find a position you like for the mount then sand the ball and receiver surfaces with sand paper and drown them in super glue. That will ensure the mount will never move around in the car.
@TommyLGarage3 жыл бұрын
Now that’s an idea !!
@whitemailprivilege28303 жыл бұрын
Oh yeah??? What’s your favorite position?
@markm00003 жыл бұрын
@@whitemailprivilege2830 Dude this is so random. To answer your question ... uhh … missionary.
@nielsenvega3 жыл бұрын
You are a Phone Mount Guru!
@TommyLGarage3 жыл бұрын
That's what they call me!
@nevets4190 Жыл бұрын
they have one with magsafe FYI
@TommyLGarage Жыл бұрын
My influence :)
@Garcia061 Жыл бұрын
Nice.
@TommyLGarage Жыл бұрын
Thanks! :)
@sam_cs_49er3 жыл бұрын
Hey Tommy, out of curiosity...r u considering to own the g80 m3?
@TommyLGarage3 жыл бұрын
Only if I could get it for an amazing employee pricing
@sam_cs_49er3 жыл бұрын
@@TommyLGarage even though that front grill is iffy imo, i’d still be tempted for anyone who wants to try out/own a g80 m3/g82 m4
@chapn72 жыл бұрын
I have a magsafe vent mount made by Vicseed, and it's shockingly strong. I live in Quebec, we're notorious for terrible roads and it's never fallen off. It's not a wireless charger though
@TommyLGarage2 жыл бұрын
Mine is a wireless charger. Works well and holds strong
@BDMassachusetts3 жыл бұрын
Why didn't you use the BMW's navigation?
@TommyLGarage3 жыл бұрын
Doesn't show police like Waze does
@BDMassachusetts3 жыл бұрын
@@TommyLGarage That's a good point!
@christopherd79223 жыл бұрын
I have Apple Car Play in my truck. Will this work plugged into my USB with the USP C adapter? If not any ideas what to do? Excellent job MacGyver. Ty
@TommyLGarage3 жыл бұрын
Yes! Should work!
@heavyboysjou3 жыл бұрын
I like your video, does the cup holder work properly after the mounting?
@TommyLGarage3 жыл бұрын
Thanks. And I don’t use the cup holder but you can put the mount on the other side
@moonolyth2 жыл бұрын
Well firstly, you should really were safety glasses and gloves when implementing tile as a grinding instrument... (DONT YOU HATE THAT?). That looks really nice. Unfortunately for me, I have a jacket that keeps 5 cards in the back.. very nice so I don't carry a wallet anymore, except it will not take a magnet now.
@musselicious3 жыл бұрын
Awesome 😊🤘🏻
@TommyLGarage3 жыл бұрын
Thank youb
@kleptodathief3946 Жыл бұрын
Does the phone fall out once u start driving lol.. That's the key
@TommyLGarage Жыл бұрын
Nope. It stays in
@DanielRoa3 жыл бұрын
I hope you realize there are MagSafe car mounts you can buy for cars.
@TommyLGarage3 жыл бұрын
I hope you realize this video is a year old
@Meaome303 жыл бұрын
Hi! How did you put the metal ball in place? Looks much more secure than an adhesively placed mount
@TommyLGarage3 жыл бұрын
It’s a Rennline mount specifically designed for this car.
@josephnalu8883 жыл бұрын
Would i have to remove the magnet from the car mount? I have a Spigen magnet car mount and don’t know how to remove the magnets on it
@TommyLGarage3 жыл бұрын
Just unscrew it from the back. Magnet will come off
@aditta697 ай бұрын
"as long as you have a ball" lol
@TommyLGarage7 ай бұрын
Or two :)
@hyde_official3 жыл бұрын
did you mean USB-C in the description --> 3. USP C to A adapter (I'll delete this after)
@TommyLGarage3 жыл бұрын
You’re right!
@ickess3 жыл бұрын
I too hate having wires running around. I hide what I can
@JaeBett3 жыл бұрын
Great Video! Why do you remove the magnets from the mount?
@TommyLGarage3 жыл бұрын
Magnets are reverse and they weaken the phone magnet
@mactibi2 жыл бұрын
I think after the charger heats up, 3M comes off. I'm not saying if it gets hot in the sun.
@TommyLGarage2 жыл бұрын
Nope
@Ciscx93 жыл бұрын
What mount is that wedged into the console?
@TommyLGarage3 жыл бұрын
linked in the description; rennin
@anthonysays3 жыл бұрын
@@TommyLGarage I was looking for this also but didn't see it in the description. What link number is it?
@bikerboy1993 Жыл бұрын
just get a rokform case and mount
@TommyLGarage Жыл бұрын
Will try
@bikerboy1993 Жыл бұрын
@TommyLGarage u wont be disappointed trust me
@artkirakosyan26333 жыл бұрын
Magic mount from scosche holds the phone.
@TommyLGarage3 жыл бұрын
Hhmmm
@plasticbaggy2 жыл бұрын
there’s actually a better one but i don’t think ut charges
@TommyLGarage2 жыл бұрын
I like the charging ones
@thomaspaquette99913 жыл бұрын
The easiest way to flatten this out is on my sandpaper like floor. Or just find some sandpaper. Update: they literally sell mounts that also wirelessly charge your phone the same way. No need to hack what doesn’t need hacking.
@TommyLGarage3 жыл бұрын
You know this video is 12 months old right ?
@Rhcpbedders2 жыл бұрын
@@TommyLGarage is there now a solution that doesn’t require this hack? 981 Boxster with iPhone 13 pro max. Rennline should just do a MagSafe option on their mounts
@Staroy_by3 жыл бұрын
This car doesnt support Apple play?
@TommyLGarage3 жыл бұрын
Nope.
@lifehackertips3 жыл бұрын
Think I’ll do this to my Porsche
@TommyLGarage3 жыл бұрын
You got it. It’s an awesome mod
@777BULLDOZER3 жыл бұрын
Cool idea dude, thanks. ++++++++++++++++++++++++++
@TommyLGarage3 жыл бұрын
Thanks!!
@DROCDOLO3 жыл бұрын
Now I know where you keep your drug stash !!!😎
@TommyLGarage3 жыл бұрын
Haha don’t tell anyone
@Pearl3Drummer3 жыл бұрын
The issue with magnet mounts is that the metal plates that attaches to the phone hinders the wireless chargers.
@patrickbyr3 жыл бұрын
If you place the plate off center, higher in my case (11 Pro Max) it still woks with wireless charging. Takes a bit of trial and error to place it correctly but will work.
@TommyLGarage3 жыл бұрын
the iPhone 12 doesn't have that issue since it has a buil-in magnet
@neilmurphy4301 Жыл бұрын
Yea. Bam. Hit any bump and good luck picking it off the floor on the other side of the car.
@TommyLGarage Жыл бұрын
Negative. Works like a charm
@mauriziomauricone2 жыл бұрын
4:34 That's partia is not 'so modular' system but rather poor Porsche build quaility LOL
@TommyLGarage2 жыл бұрын
haha fair enough
@DiverDown2Deep2 жыл бұрын
wow, this guy has subscribers?... grinding on the floor????
@TommyLGarage2 жыл бұрын
He has like 4 subscribers I think...
@sliptek60693 жыл бұрын
Only bummer I found is that I can no longer use my wireless charger with the magnet affixed to my phone.
@TommyLGarage3 жыл бұрын
Why not remove the magnet ?
@alilazmo3 жыл бұрын
So, how is it better than apple MagSafe?
@TommyLGarage3 жыл бұрын
Stronger magnet and black which matches the interior better
@paulconstantin47602 жыл бұрын
So why don't you just patent one exactly like that and sell in millions in America & Europe
@paulconstantin47602 жыл бұрын
PS you might have to remove this video 😅 possible clients everywhere.
@TommyLGarage2 жыл бұрын
No one will buy it
@alan852 жыл бұрын
I have no idea what problem you are trying to fix in this video. There are plenty of MagSafe car mount/chargers out there. No need to make your own. Besides, why do you even need to mount your phone? I’m sure your car has CarPlay.
@deletedchanneI Жыл бұрын
cause carplay doesn’t have some features
@shpetz56093 жыл бұрын
Sugru glue would be stronger
@officialWWM3 жыл бұрын
The floor? Really? Have you not heard of sandpaper? 😂
@TommyLGarage3 жыл бұрын
Floor was faster lol
@itsjusttimk2 жыл бұрын
No way it holds up, nice try but not a good solution for anyone.
@TommyLGarage2 жыл бұрын
Ive had it for a year. Zero issues
@Chukijay3 жыл бұрын
Modular, huh? That’s what we’re gonna call it?
@TommyLGarage3 жыл бұрын
I think so! :)
@asanettles56793 жыл бұрын
Floor.... Sandpaper.... Whatevs
@TommyLGarage3 жыл бұрын
whatever works :)
@mtdewyx2 жыл бұрын
Ph falls off on bumpy ride
@TommyLGarage2 жыл бұрын
Nope
@The888Redlich10 ай бұрын
Usecarplay and leave phone in the glove box
@TommyLGarage10 ай бұрын
This looks cool
@canoaslan10118 ай бұрын
You owe me 6 minutes and 57 seconds of my life back
@TommyLGarage8 ай бұрын
Nope. You manage your own life.
@dontbelikeflorin2 жыл бұрын
1st step buy a porche
@TommyLGarage2 жыл бұрын
Lol true
@BrillianceAutoSpa3 жыл бұрын
Unfortunately due to Apples voodoo, the only way I know to get 15W charging is to use 100% Apple products like the magsafe charger and 20W charging brick. 🙃 Any other solution and you're only going to get 7.5W to 10W max.
@TommyLGarage3 жыл бұрын
7.5 is enough for me honestly
@BrillianceAutoSpa3 жыл бұрын
@@TommyLGarage I want to actually get a decent charge from it so I'm going to be testing some 20W Belkin car chargers with and Inline meter to see if they output the proper 15W.
@aadd35387 ай бұрын
Brodit
@TommyLGarage7 ай бұрын
Yes
@amdrew56673 жыл бұрын
Tomku Shelton jest daleko od Ciebie
@TommyLGarage3 жыл бұрын
Kto to Shelton?
@amdrew56673 жыл бұрын
@@TommyLGarage miasto
@fabianm.74043 жыл бұрын
God, another Video to this topic... I really enjoy your Videos but these are just insanely annoying bro.
@TommyLGarage3 жыл бұрын
Haha I had to get it out. It’s one of the things I do to every one of my cars. This might be my last phone clip video lol
@fabianm.74043 жыл бұрын
@@TommyLGarage I will mark your words! 😁 Or i will roll my eyes when the next one is coming out 😀
@FranchiseSIX52 жыл бұрын
Nothing is $8 in your links anymore. In fact, the cost for your list is well over $100! Anker has one for $70
@frisbeeking70024 ай бұрын
tommy garbage
@TommyLGarage4 ай бұрын
Keyboard warrior
@islamonlywayout2 жыл бұрын
Just need a magsafe car charger from ebay on the vent and your done. You seem to find it hard to breath too btw