This thing is a BEAST- Atezr V35 extended

  Рет қаралды 3,064

The Clack Shack

The Clack Shack

Күн бұрын

Пікірлер: 37
@maddogminor306
@maddogminor306 Жыл бұрын
From the Cog Squad. Jason and Brook sent me here. I am a73 year old gradma and I have always loved building things with wood. Small things like spice racks, Bird houses and sings. Thought you might inspire me.
@TheClackShack
@TheClackShack Жыл бұрын
There are many possibilities with lasers, many things can be cut from affordable plywood for uses such as those.
@EddieSheffield
@EddieSheffield Жыл бұрын
Nice! I recently added the extensions to my P20. Picked up the rotary too. I did have one weird problem with the extension tho. The Y-axis was all janky on burns, really noticeable doing circles. I finally found it thanks to your video on calibration. When I finally tried pushing on one end of the gantry I notice the other was lagging quite a bit. And then I realized the shaft wasn't moving at the same time as the motor. But the coupler seemed tight, and I was careful not to bottom out the shaft on the motor. Turned out the threads in the coupler had some cruft in them so the screw would get tight, but not actually clamp up. Chased the threads with an appropriate tap and that fixed it. I confess my setup is HEAVILY inspired by yours!
@TheClackShack
@TheClackShack Жыл бұрын
Glad you like it. Mine has made laser work easier and more fun
@steveray5288
@steveray5288 Жыл бұрын
When I assembled my V35 I had a noise in the X movement. I adjusted the rollers and could never get rid of the noise. I found out after having it for a long time it was the pin on the focusing lever when up was rubbing on the gantry. Got out my Dremel and slightly grind the pin to clear the gantry. Other than that it has been a great machine.
@TheClackShack
@TheClackShack Жыл бұрын
Good to hear
@camarogs1
@camarogs1 Жыл бұрын
Can you point me in the direction of where you have a switch to change between rotary and bed? Maybe in one of your videos? I hate pulling the wire out each time. I did turn the stepper motor to make it easier.
@TheClackShack
@TheClackShack Жыл бұрын
Link in the description. It is from a fellow Etsy shop. kzbin.info/www/bejne/bHazkqh-dtF0pK8
@camarogs1
@camarogs1 Жыл бұрын
Thanks I am going to check it out.
@pietermulder9199
@pietermulder9199 Жыл бұрын
My oh my😮
@TheClackShack
@TheClackShack Жыл бұрын
I like it…
@amoreyjones565
@amoreyjones565 Жыл бұрын
Say Im thinking of upgrading from the 10w comgrow but i want another brand 40w module or even the atzer 35w module can it be done and how?
@TheClackShack
@TheClackShack Жыл бұрын
A few companies make module upgrades but it requires an additional power supply. It.may be better to get a whole machine
@amoreyjones565
@amoreyjones565 Жыл бұрын
Ok well ifyou get I would liketo see even a shorts video on uprading the module vs a whole machine pro and cons and demonstration.
@billieb
@billieb Жыл бұрын
Hmmmm. at 20:53 you say "upload the sd card" . You got an sd card with your 35v?
@TheClackShack
@TheClackShack Жыл бұрын
Every laser that I have gotten has came with a micro SD card and USB card reader. That is where they send the files with the machine. It is also used to transfer files to the machine when using the offline controller.
@billieb
@billieb Жыл бұрын
@@TheClackShack Interesting. I have an xtool d1 pro that I had to go "find" the download and the same with my atezr v35.
@DavZell
@DavZell Жыл бұрын
What shirt is that? I don't see it at your merch store.
@TheClackShack
@TheClackShack Жыл бұрын
It isn't on Spring, this is a local maker that I use for the custom shirts. Here is her information. kzbin.info/www/bejne/oJaxanWbiJuehLc
@DavZell
@DavZell Жыл бұрын
@@TheClackShack Thanks!
@pacopaco2452
@pacopaco2452 2 ай бұрын
Could you upload the data from the pendrive? please, I have faulty folders
@TheClackShack
@TheClackShack 2 ай бұрын
Not sure I am following
@richardarmstrong2659
@richardarmstrong2659 Жыл бұрын
Why the V35 and not the L2 36W?
@TheClackShack
@TheClackShack Жыл бұрын
I cant afford to give up work are. When I went to upgrade, there were no extensions to get for the L36. I also just like the simplicity of the V series.
@amoreyjones565
@amoreyjones565 Жыл бұрын
I just thought for the old rotary a mechanism to adjust the hieght would make your life easier.
@TheClackShack
@TheClackShack Жыл бұрын
It does
@amoreyjones565
@amoreyjones565 Жыл бұрын
Yea I watch the video I dont think you missed anything maybe just upgrades like a pneumatic opener like that on car trunks but it and flame proof lining and maybe a patent It appears perfect for now.
@russgare6523
@russgare6523 Жыл бұрын
I just ordered tge V35 with the extension kit the honeycomb they have is 20"x20" and the dimensions for the V35 with the extension is 33"x17" are you using a honeycomb with yours and what are you using
@TheClackShack
@TheClackShack Жыл бұрын
I use a Nivill, it’s the size of the machine
@russgare6523
@russgare6523 Жыл бұрын
Just ordered the Nivill thanks for tge advice and quick response
@russgare6523
@russgare6523 Жыл бұрын
The V35 doesn't come with any CAD software any suggestions on which one I should get I want to try doing some acrylic LED lights
@charlesreicks648
@charlesreicks648 Жыл бұрын
trying engrave on my xtool D1 Prow and it is engraving up side down, My y access in backwards even when I said go back to factory settings. What do i do
@TheClackShack
@TheClackShack Жыл бұрын
What software? Sounds like the origin is wrong
@charlesreicks648
@charlesreicks648 Жыл бұрын
What do i do to correct it. Thanks Tim
@rustyridgley972
@rustyridgley972 5 ай бұрын
Hello and good evening. I know this has nothing to do withyour video just looking for help. I hope your having a great weekend. I have a question and maybe see if you can help me. I have the Atezr 35v Diode laser and i just bought the extensions for it. I hooked it up and now in certain spots im getting a grinding sound and messing up my job. ANy thought on what maybe causing this issue. Thanks for any help Rusty Ridgley.
@TheClackShack
@TheClackShack 5 ай бұрын
Sounds like it is either out of square or out of time.
Testing the Atezr P20
16:55
The Clack Shack
Рет қаралды 3,1 М.
You have never seen a laser like this- SRWOR 10 watt
35:05
The Clack Shack
Рет қаралды 8 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
I Failed at the Biggest Craft Show in the USA-Here’s What I Learned
22:36
How to Make a Real Diamond - (Not Clickbait)
8:51
JerryRigEverything
Рет қаралды 2,1 МЛН
30 watt diode laser is too strong?
16:23
The Swedish Maker
Рет қаралды 81 М.
My New Atezr V35 Pro Laser and Enclosure Build
13:37
James Wegner
Рет қаралды 3,1 М.
ATEZR V35 35W LASER Review | The Good, The Bad, and The Ugly
12:41
Cleaning the LaserMATIC MK2
24:04
The Clack Shack
Рет қаралды 2,2 М.
Learn How to Laser Engrave Glass like a Pro using a Diode Laser!
13:52
Mellowpine Lasers
Рет қаралды 246 М.
ENCLOSUREZILLA- The best diode enclosure EVER ??
24:56
The Clack Shack
Рет қаралды 13 М.