This was WAY MORE DIFFICULT than expected - Renault Master Van Conversion DIY #15

[@zedlicious]

It’s too late to say, but it’s far easier to run wires in flexible conduit through the ribs and channels of the van first, before you insulate and line the roof. Run and mark them. You got there in the end. Looks good

[@zavadventures]

you're right, we should have done exactly that... but it works and we just did our best back then

[@momahemakcampervan3832]

Pray it will be easier for you, ... mine, as well, I like curve for the ceiling....

[@zavadventures]

Thank you! Crossing fingers for your build 😊

[@zedlicious]

It’s too late to say, but it’s far easier to run wires in flexible conduit through the ribs and channels of the van first, before you insulate and line the roof. Run and mark them. Then use automotive sika and a couple of holding screws to attach timber strips to the steel of the van then you can attach your shiplap to the ceiling piece by piece

[@zavadventures]

we should absolutely have done that! It would be so much easier! but we learn as we go so there is a lot of back and fourth with all of the stuff.

[@pauldenham8653]

Do you think adding timbers first ti the roof will be easier then add insulation

[@zavadventures]

you mean you don't want to have insulation at all? that would of course be easier ;) but from what we learned insulation is really important.

[@kwe290]

🧡

[@zavadventures]

🤗

[@systemica1254]

o, Kamil! xD ale bez jaj, daliście czadu z tym sufitem - wygląda bajerancko i full profeska!

[@zavadventures]

Dzięki Piku! :) Samiśmy nie dali rady siłowo ciuteczkę ;) a Kamil ostatnio jest Thorem. Albo turem. W każdym razie siły ma mniej więcej jak 3 osoby :D