Throttle Cable Removal and Install from Mikuni TM 28mm Carburetor - Kart Application

This video is a How To on the Throttle Cable Removal from a Mikuni 28mm Carburetor. It is important to start with the proper size throttle cable. This Mikuni TM 28mm Carburetor is set up for shifter kart application, but the method to remove the throttle cable will be the same for mx or atv's.
If you find value in the content of these videos, consider a donation to our project.
www.paypal.com...
Another video brought to you by www.norcalkarte...
You can also support our channel with purchases from our affiliate eBay Store -
Extra Kart Parts
rover.ebay.com...
Norcal Karters on Facebook - / norcalkarters
Norcal Karters on Instagram - / norcalkarters

[@maryjanelow8170]

Thank you so much for posting this video!❤

[@scotttipps8155]

He made a very good and valid point. Use the correct screwdriver!!!!!! Just a little info for people out there that don't know, that is NOT a Phillips head screw on the cable holder. That is a #1 JIS screw head.

[@vgnope]

Sweet man. Just picked up a kx80 kart. Ran through motor and redid gaskets.. etc. this is what I needed.

[@NorcalKarters]

Glad this was helpful. Consider a donation to keep more How To videos coming www.paypal.com/paypalme/norcalkarters

[@vgnope]

@@NorcalKarters where’s your shop. Need some items looked at

[@NorcalKarters]

@@vgnope you can send an email to [e-mail] for parts or service needed.

[@commandcleanpressurewashin8386]

I am having trouble taking the retainer out, I’ve tried break cleaning it, and it still won’t come out

[@NorcalKarters]

If the retainer is jammed in there, you may need to use a pick or needle nose to fish out. Before re-installing, make sure the retainer is not damaged

[@commandcleanpressurewashin8386]

@@NorcalKarters yeah I did that and I cam right on out thanks