Car or Truck Door Locks Not Working - Replacing Door Lock Actuator - 07-13 Toyota Tundra

I've installed several door lock actuators now and I've learned several things along the way. I also spoke with some professionals to get some tips and tricks. All of that information is shared in this video. There is definitely a wrong and a right way to install a door lock actuator. I highly suggest you do not purchase an aftermarket actuator. They are known to have issues. Brand new actuators can be very pricey but you have a great option on eBay.
This video is sponsored by Actuators Plus (eBay). They sell OEM actuators with an optional lifetime warranty. All you have to do is return your faulty actuator in their pre-labelled shipping envelope and your lifetime warranty will be activated.
www.ebay.com/s...
*Actuators Plus did provide the actuator for this installation video free of charge *
Symptoms of a bad actuator:
1. A door will not lock or unlock using your power locks button in your vehicle
2. Your remote will no longer allow you to lock or unlock the doors of your vehicle.

[@billkirchheiner2118]

This video was very helpful! I fixed my door in no time at all. The tip about the rod going through the mechanism as well as the door lock fitting in the cross was the best and probably something I would have overlooked! Thanks!

[@TightWadDIY]

That’s the reason I made the video! No others showed that step when I was looking.

[@RobertBoos-m9z]

Outstanding video!! I was able to replace mine for the first time in about 2x the time it took me to watch the video. I have now become a subscriber. Thanks again!

[@TightWadDIY]

That’s great! Im glad it worked for you too! Thanks for the sub.

[@erichenline]

Thank you so much for this video and link to Actuators Plus. I changed my passenger door out in about 45 minutes and thanks to your tips, had no issues. Thank you again!

[@TightWadDIY]

That’s great!

[@willyfoofoo6076]

Bravo!! This is how a "How To" video is supposed to look. Very detailed and instructional. Thank you very much!

[@TightWadDIY]

Thanks for the kind compliment! I’m a teacher by trade so I like to think I provide clear instructions. I have several other videos for this truck so be sure to subscribe.

[@BfreeBob]

Very clear and helpful tutorial! Toyota actuators seem to be junk if my experience is typical. I replaced two actuators on my 2015 Lexus RX 350 yesterday and I have two more to replace on my 2012 Tundra.

[@TightWadDIY]

Yeah I’v replaced three of the four on this truck.

[@onehappystud]

Huge thank you for the video! I got the actuator on E-Bay, and your video made for a smooth install. Great stuff.

[@TightWadDIY]

That’s great news!

[@springguntunes]

Excellent tutorial. BRAVO! Thank you for the door latch trick. I would have surely made that one major mistake. Also mine is the driver's door so I would have missed that lock screw too. Very good. I've watched at least a dozen tutorials on this and they all missed the big stuff. Always greatful. Also bought an actuator from your guy. I've been using the door key for almost two years. Thank you.

[@TightWadDIY]

I appreciate it. I’m glad it helped you out. I decided to make the video because others left some of the harder parts out. I have several videos for this truck to make sure to subscribe.

[@seerex8398]

excellent video , helped me do all 4 doors I less than 3 hours with no issues , also like the price and service of the actuators plus , thank you again

[@TightWadDIY]

That’s awesome! I’m glad you were able to get it done easily! I’ve done three of my four. They are a great company. I love OEM parts so their service is a no brainer.

[@artsol8125]

Great step by step video. As my actuator just went out and had to replace!thank you.

[@TightWadDIY]

I hope you’re able to get it fixed.

[@artsol8125]

@@TightWadDIY with this video i was able to complete my replacement pretty quickly. Thanks again. Did have to loosen that window railing to get the actuator out.

[@yeates26]

Thank you so much for posting this video. It made it possible for me to replace both driver and passenger side door lock actuators today. The best tutorial for this job hands down! 2014 Tundra

[@ihrojo]

Thanks for taking the time to show how to fix it. I have the same problem with my tundra 2007 and you just helped me saving hundreds dollars 🙏

[@TightWadDIY]

Great! I’ve had to replace 3 of the 4 on my truck. Haven’t had any issues since.

[@adansoto2515]

Worked perfectly! Very thorough video. Thanks a lot!

[@TightWadDIY]

You're welcome!

[@kbroomfield7528]

Great video. I've been dreading replacing the small motor and after seeing your video, ordered the actuator and 30 min install because of your clear instructions. My lock works now and I avoided the shutting my door and not being able to open it up pitfall thanks to your instructions. :-)

[@TightWadDIY]

I contemplated replacing the motor too but I’m so glad I didn’t!

[@kbroomfield7528]

@@TightWadDIY My wife couldn't believe how fast I did this project, very successful and I only broke one clip which I had purchased from a year ago when I was going to do the motor replacement. :-) Much thanks!

[@TightWadDIY]

@@kbroomfield7528 it’s always nice to impress the wife while saving money! 👊🏼

[@rmsf8086]

awesome & easy to follow instructions .... thank you very much!! (2016 Tundra)

[@TightWadDIY]

I’m glad you found it helpful!

[@boomdoggy]

Very, VERY well presented and articulated!!! I just bought my son a 2010 Tundra & the passenger side door actuator needs replacing. I’m gonna use your vid as my tutorial. Btw your name cracks me up!!!

[@wcombs]

My goodness this video was perfect. Exactly what I needed.

[@TightWadDIY]

It’s my pleasure. I couldn’t find another video showing the full process. I thought I’d make my own.

[@douglaswilson4814]

I’ve had this part for about a year but have been putting it off. With your help it went way easier than expected. Many thanks my friend.

[@TightWadDIY]

That’s great to hear!

[@eddiehuiz]

Same here🎉

[@shannonsheely8904]

Thanks so much! Saved me a good amount! Excellent video.

[@TightWadDIY]

You’re welcome. I’m glad you found it helpful. Be sure to subscribe. I have several videos for the Tundra.

[@ltveh123]

Very good informative video

[@TightWadDIY]

So nice of you

[@stevenseuffert9762]

You the man tightwad. Just had to do the driver side on a Lexus GS350. Thanks for showing key tumbler step. Actuator plus should give you a cut of the action

[@danstrickland2731]

This was really helpful. Replaced one today. Thank you!

[@TightWadDIY]

I’m glad it worked for you too!

[@Hikage_Maru]

Thank you for such a well made video! Saved me from paying a mechanic.

[@TightWadDIY]

That’s great! I’m glad the video gave you the confidence to get it done! I have several videos for the Tundra so be sure to subscribe.

[@johngillings2102]

Found out the hard way that my key didnt work after replacing actuator. Thanks for the video!

[@TightWadDIY]

What made the key not work?

[@johngillings2102]

@@TightWadDIY I never loosen the torx screw and repositioned the piece back in

[@TightWadDIY]

@@johngillings2102 ahhh.. were you able to get it fixed?

[@johngillings2102]

@@TightWadDIY absolutely! Thanks again

[@rickvigil5847]

If you're door won't open on either side roll down the window take the window trim off of the exterior the trim that has the filt facing inside that will give you a bigger gap to look down the door with your light i took a carbin fiber cleaning rod push down the actuator handle down open the door

[@TightWadDIY]

That’s a great tip! Thanks.

[@madcamp44]

Your teaching is so detailed and easy to follow. Super impressive! Awesome job!

[@TightWadDIY]

Glad it was helpful!

[@Katy-Did]

Thank you!

[@TightWadDIY]

You're welcome!

[@martinwest6603]

Excellent video just did my 2018 Tundra using this only difference was the door handle wiring single plug instead of two. Thank you very much.

[@TightWadDIY]

Good to know!

[@grassman506]

Man!! you just did exactly what I have to do. Just perfect bro

[@TightWadDIY]

I couldn’t find a great video for it so that’s why I made this one. Let me know how it goes.

[@robertdykstra5319]

This video was great. After I found it I ordered from actuators plus. The actuators came fast and I was able to install 3 actuators on my truck with little difficulty.

[@TightWadDIY]

That’s great news!

[@martinm.8343]

My brother, you saved my life!!!! This is the second time I've paid to get these actuators changed, and now for the third time you taught me to do it my self and it worked. IT WORKED!!!! Thank you so much! This time, the only expense was the part itself. THANK YOU X1000!!!

[@TightWadDIY]

My pleasure. Hopefully you got a good quality actuator this time so you don’t have to do it again.

[@mrblueskynm3968]

Perfect! Both driver and front passenger locks have this same symptoms on a 2010 Tundra. Thanks so much!

[@TightWadDIY]

Yes sir. It seems to be an issue with most Tundras.

[@davidcontreras6740]

This video was excelent, and helpful , I fix my sequoia 2008 step by step and I did it!!! 👏🏼👏🏼👏🏼👏🏼

[@TightWadDIY]

Glad it helped!

[@Beezi.]

Quick note. When you take the key lock cylinder out, I had to lock the door when putting it back in. If I put it back in with the door unlocked, the key would not work on the door. I reinstalled it while the door was locked and all good.

[@TightWadDIY]

Nice info! Thanks.

[@ace_condor]

Exceptional video! Changed out the passenger door actuator in my 2007 Tundra. Not long after, my driver side started acting up so I replaced that one as well.

[@TightWadDIY]

I’m glad you found the video. It’s a tedious process for sure!

[@ershaffer711]

BY FAR the most comprehensive and well explained video for this I have ever seen! Can't thank you enough for this! I wish I could like it 100 times. Thank you!

[@Struckmonster12]

Would I have to do anything to my fob for the doors to unlock/lock when the actuator is replaced or is it good to go after installment?

[@MarioDLuna]

Hey brother....took two tries but got it done. Your instructions were very clear and helped me out on my Sequoia. THANK YOU.

[@TightWadDIY]

That’s great! I’m glad you got it done. It’s tedious process and you need to follow it step by step!

[@wowhthumperh5911]

Did all four door everyone but the driver work perfect now, for some reason the outside door handle will unlock the door when pulled. I'm not sure if I got a bad actuator, it did have trouble clipping in the harness but I ordered another actuator from a different manafuctor I will find out this weekend if it's actuator or something I messed up

[@TightWadDIY]

Did you make sure the pin from the keyhole was engaged properly?

[@wowhthumperh5911]

At first I did not then realized my mistake after turning key while mis aligned, removed and properly seated. My problem could be their where they are not synchronized

[@wowhthumperh5911]

It was a bad actuator, before I swapped to new good I tried adjustment with where the cross lined up thinking I had mis aligned it but no luck, threw a new one in and works perfect

[@ilovetotri23]

Thanks!

[@sheckel2]

Great video. You made this job so easy. Thanks.

[@TightWadDIY]

Thanks for letting me know. I couldn’t find a great video for it so I knew I needed to make one.

[@GL-jj2wg]

Thank you!

[@TightWadDIY]

You’re welcome!

[@jonathanallen6681]

Great video! Question, my door will always lock. But very rarely unlock. Is that the same issue as described in this video? Thank you

[@TightWadDIY]

It could be. I’m not positive though.

[@joelertel8365]

This worked perfectly for my 2017 Sequoia

[@TightWadDIY]

I’m glad to hear it worked for you too

[@lburton3959]

Makes me want to be a mechanic!

[@TightWadDIY]

Haha! Makes me appreciate mechanics!

[@lucillecorrell9237]

Thank you so much for your videos.. I just have one question when you replace the door lock actuator.. can you use the old key bop.. mine's not working. Appreciate your help, thank you, Lucille

[@TightWadDIY]

Yes. Are you sure you got the rod with the star on the end from the outside handle in the correct way? You aren’t changing anything except the motor really. It has no impact on the keys.

[@georged.3478]

Got an ‘07 Tundra. The driver side door handle won’t open the door from the outside. You can open it from the inside but not outside. The door handle will also not retract back, almost like it has lost whatever tensioner it was connected to. Dealership said it was the door handle that’s broken but I don’t think it is. I tried to install a new handle and it was doing the same thing. Any tips?

[@TightWadDIY]

I’m really not sure. I assume there is a cable that should be attached that provides the tension.

[@infoinfo6910]

Hello, If anyone can help me with this locking/unlocking issue for my 2009 Jeep Compass: - With the remote OR the inside driver locking/unlocking button, I can unlock only the driver door. - With the remote OR the inside driver locking/unlicking button, I can lock all the doors. - The doors other than the driver open manually. - The trunk does not unlock. THANK YOU VERY MUCH

[@mattmcneely863]

Great video! I would have never never attempted this without it. Thanks

[@TightWadDIY]

That’s great to hear! I’m glad this gave your the confidence to fix yours.

[@dancin4]

I have a 2008 tundra both driver's side door and the driver's side rear door are not locking or unlocking. Is this the same issue as just one door latch failing?

[@TightWadDIY]

Yes

[@jkucukov]

On my 2015 Sequoia the Left driver door locks and unlocks with remote just not with physical key in the door lock, what could be the issue? I looked with a boor camera to make sure that cross you make reference to in your video is turning left and right, is there additional linkage going down to the lock actuator from the lock cross?

[@wewhoarethem]

Great help. Took me 30 mins. Would have taken 10 if not for that my big hands and that rod that slips through the hole. I’m Glad I watched this video and left the rod in on e as instructed.

[@TightWadDIY]

My pleasure!

[@markgunder5593]

Question!!!! What if my door is shut and I can't open it? I know for sure it's everything in this video that I have to do but the part with the bar with tight space is what's loose or off and now I can't get my back driver side door open???

[@DJDuncanDesigns]

Would this also work on a 2010 Jeep Liberty? I'm about to take the plunge as I cannot afford the $500 bill a mechanic wants!

[@TightWadDIY]

It’s the same concept but Obviously not exact.

[@clintcarter7294]

Thanks! Saved me a lot of money and time. I've never removed a door panel or replaced a door actuator before. Felt good. One area where I messed up was not securing the green cable as far down as it would go in the door. I would open the door once and then it wouldn't work anymore because the cable kept slipping out of its holder. I used an aftermarket actuator because the OEM's are only lasting me about 2-3 years. This is the third set of actuators on this 2013 Sequoia Platinum. Total parts were just under $100 for driver and passenger doors on the front.

[@TightWadDIY]

Clint Carter Hopefully you have your issue fixed now. I tried an aftermarket from Rock Auto but the latch part didn’t fit properly so I sent it back. That’s why I went with a refurbished OEM. I haven’t had an issue on any of the three I replaced so far.

[@christophervines9756]

He is very right on making sure that metal rod is in place 😂...what a pain in the ass to get the door open. Luckily a 3ft rod from Homedepot with a hook bent on the end and an endoscope taped to the rod. I was able to fish the makeshift rod through the window switch panel hole and somehow hook the lever opening the door. Took about an hour of fishing around and bending the rod but I can't imagine what a mechanic would have charge me!! Less learn watch the whole video!! Haha

[@TightWadDIY]

That’s a great idea for anyone else in that situation. I’m sure you were quite frustrated.

[@8u2b]

Thank you🙌🏾🙌🏾🙌🏾🙌🏾✊🏾✊🏾✊🏾✊🏾✊🏾!!!! Saved me a ton of cash. Wife and I replaced it tonight. Best tutorial ever!

[@TightWadDIY]

Yes! I’m glad it worked for you too! Thanks for the kind compliment. Please consider subscribing.

[@ilovetotri23]

Just replaced to front door lock actuators on my 2014 Tundra thanks to your video! It was relatively easy. I did get my new actuators from Actuators Plus and I am very impressed! They included a postage paid return envelope for my faulty actuators. I am so grateful for your great post! My only hiccups were not knowing how to reconnect the drivers door electrical connector, and forgetting to bolt the passenger side window track before replacing the door panel, ugh. The whole job, including the hiccups took about an hour. I would encourage almost anyone to do this job before having a shop do it. If anyone knows of a video tutorial on all the Toyota electrical connectors and how they work please send me the link. Thanks again!

[@TightWadDIY]

That’s great! I’m glad to hear you were able to get yours done too!

[@hoofhearted1833]

All these years later and everything is still the same. Just replaced both of mine and your video was gold! Thanks!

[@TightWadDIY]

Glad it helped!

[@alabamacollectibles]

Great video! Just knocked it out in an hr. I did almost forget to bolt the window rail back in place. Thank you!

[@TightWadDIY]

Glad the video helped you out!

[@Mish_the_ish]

Thank you soo much this helped a lot

[@TightWadDIY]

Glad it helped!

[@philcollins2176]

Changed out the front right and left actuators on 07 tundra. Excellent video and thanks for the actuatorplus tip.

[@TightWadDIY]

Great! I haven’t had any additional trouble with mine!

[@josemojica9347]

Just did this a minute ago and I gotta say thanks for the informational video now all my locks work !!!

[@TightWadDIY]

Great to hear!

[@jimh8080]

Great step by step directions worked perfectly for me. Thanks

[@TightWadDIY]

I’m glad it worked for you too!

[@fasguy699]

Great Video- thank you!

[@TightWadDIY]

My pleasure!

[@tonyculverhouse4366]

That's how training videos should be. Thanks!

[@TightWadDIY]

Thanks! That’s actually why I started the channel several years ago. There were too many videos with good content but poor instructions.

[@benharris6263]

Do u know y the key will only unlock but not lock the doors

[@TightWadDIY]

Hmmm…I’m not sure.

[@mikebittel9206]

What is the failure rate on these actuators? Mine started acting up and I found this video. I just finished changing out the actuator on the Driver's Door. Everything on the driver's door now works(Button and Keyless lock and unlock as well as key lock/unlock) but the other 3 doors do not lock/unlock from the button or the key fob. Also I get no audible beep when locking from the key fob. I get a beep when I unlock but it only unlocks the driver's door. Does this mean that 1 of the other 3 doors also has a failed actuator?

[@TightWadDIY]

I had to replace three of mine. I can’t say for sure if that’s your issue or not, sorry.

[@jeffwilton1929]

Thanks for the great video, I followed your thorough instructions and completed the actuator replacement in far less time than I expected.

[@TightWadDIY]

I’m glad you found it helpful. When I struggled with my first one I knew I needed to make a video for others. I have a lot of videos for this truck so he sure to subscribe.

[@lovebarbie3589]

How long

[@lovebarbie3589]

Was your part around 25$-60$

[@rjm337j]

@@lovebarbie3589 45 minutes

[@tomsiska1891]

Outstanding Video - Thank you so much. I did the drivers side front door on my 2014 Tundra, all went smoothly. I had watched another video when doing my rear passenger side door and never put the metal bar back in. The door is now shut but it cant be opened from inside or out. BIG MISTAKE working on how to remedy this since it is nearly impossible to pull the door skin with the door closed. If any one has a suggestion - I'm all ears. If I find a way, I'll post it

[@TightWadDIY]

I’m glad you found the video helpful. I’m really not sure how to get the door open. Maybe ask a local mechanic if they have any ideas.

[@juliegabestinson4151]

Great video. I followed along with my replacement and all went well!!!

[@TightWadDIY]

My pleasure! I’m glad you found it helpful.

[@webcrawler3332]

One of my rear locks won’t “lock” when I use the key fob. It unlocks no problem. When I move the lock switch manually I can unlock and lock also. Do you think the actuator is going bad in my instance?

[@jeffreycollins6275]

You had the answer as to why I could not unlock my door with the key. Thank you

[@TightWadDIY]

Were you able to get it fixed?

[@alpineruleshockey7527]

I’ve got a 2011 tundra and just recently my power door locks only engages 21:33 the driver’s door. There used to be a slight delay and the other 3 doors would lock or unlock. Would one actuator fix this or do I have to replace all of them

[@TightWadDIY]

Each lock is typically independent. I’ve replaced 3 of my four actuators but all at different times.

[@beegeesg5685]

Wish I woulda searched for this before paying the dealer $900 to replace this. 🤦🏻‍♂️

[@TightWadDIY]

It’s expensive because it takes a while. It’s not hard if you follow the steps carefully.

[@beegeesg5685]

@@TightWadDIY Great video and very detailed. If any of my others go out, I'll do it myself. Thanks!

[@paulnunley4879]

Thank you so much. Step by step instructions work exactly for a 2019 Tundra CrewMax. I appreciate you taking the time to help others. You saved me $650 at the shop to replace one actuator! Ditto other comments regarding the rod mechanism and the door lock fitting. Invaluable.

[@tptrading_23]

I went to my dealership, and they said it's going to take 3 weeks for them to even look at my door! I have a Ford Fusion and my front door does not stay closed. Do you think it's because of this issue?

[@TightWadDIY]

It could be related to the same part. Does the part on the actuator flip down when you push on it?

[@frenchtoast_em]

Video helped a ton. Ran through everything I needed to do

[@TightWadDIY]

I’m glad you found it helpful.

[@mynorgabrielplato5912]

Great an very helpful tutorial sir. Thank you

[@TightWadDIY]

My pleasure!

[@BDTube2006]

Greetings TightWadDIY, I have a problem that the manual door lock moves freely... I can press the power locks to lock the door, but the manual lock button simply rocks back and forth... Any suggestions?

[@TightWadDIY]

One of the cables shown here (green and white) could have come loose.

[@ilovetotri23]

I replaced the rear door actuators today and committed the biggest sin. I did not turn the latch down before reinstalling the new actuator, and then forgot to put the post through the hole in the actuator. I was able to open the right side, from the inside, and fix that problem. However, I think the child door lock was down because I can not open the door from the inside. I know you said you will never be able to open the ever again. Does anyone know what to do, short of destroying the door panel, or going to a shop for help? If I lower the window, it appears as though I could push down on that post if I had the tool. I already tried pushing up on the child safety door latch with a strong flexible tool. Ideas?

[@TightWadDIY]

Sorry. I really don’t know how to fix that. Maybe call a local mechanic (not a dealership) and see if they have a suggestion.

[@ilovetotri23]

@@TightWadDIY I bought a 4' piece of aluminum from my local hardware store. It was 3/4" wide by 3/16" thick, cost $8. I cut about 18" off, with my dremel so I would not wreck the headliner. Also cut an angle off at the bottom to try and catch the hole where the rod goes through the actuator, and bent the aluminum slightly at the bottom to try and get the right depth go behind the actuator. Measured based on the opposite door about where the hole would be. It took a lot of trial and error, and a ton of patience...but I was successful in getting the door open. I should have watched your video one more time before trying the backdoors, either way lesson learned!!! Thanks.

[@TightWadDIY]

@@ilovetotri23 That’s great news! Where did you get the idea?!?

[@ilovetotri23]

@@TightWadDIY Short of destroying the door panel, I knew I had to either get the child safety lock turned off or somehow open the door from the outside. After several failed attempts to move the child safety lock tab, I ruminated on how I could open the door from the "outside". That is when I devised the plan that eventually worked.

[@JSKenterprise]

Is the 2013 Toyota Sequoia the same setup as the your Tundra?

[@TightWadDIY]

Should be. I think it was 07-13.

[@JSKenterprise]

@@TightWadDIY Thanks

[@byronr9119]

Help. I just installed this into my 2016 Tundra both driver and passenger sides. Now the moment I close either door, they unlock themselves. No matter what I do. I basically have no way to lock my truck now. Any idea how to rectify?

[@byronr9119]

So upon further investigation- the door jam latch, when it clips onto the metal loop to secure the door shut, forces my lock to pop back open. Not sure how to make that stop happening.

[@TightWadDIY]

Wow. I’ve never heard of that. I’d call a local mechanics and see if they know.

[@noraakare364]

If I want to fix the rear door would it be the same? Because the doors don’t have the same lock as the front one. I’m talking about Mazda Lantis 2004. Thank you!

[@TightWadDIY]

It’s similar but doesn’t have the piece with the cross.

[@noraakare364]

Thank you so much

[@jeftechirinos]

Do you have the link from eBay ?

[@TightWadDIY]

Is the one in the description working? Here it is: www.ebay.com/str/Actuators-Plus

[@rynojadams]

just watched your video as I'm getting ready to do mine. one question, could you test the manual outside handle before getting everything in place...just to double-check that it was installed correctly?

[@darrellbraniff5129]

My doors are not locking with remote or on door switches. They will unlock with remote and switches. Doors will not lock when speed is reached but will unlock when placed in park. Am I understanding correctly that both driver and passenger actuators have failed at the same time?

[@TightWadDIY]

Interesting. I’d try just one first to see if that is your issue.

[@darrellbraniff5129]

I'm waiting for the delivery of the driver's door actuator. I'm not convinced that is the issue but I'll let you know.@@TightWadDIY

[@eddiehuiz]

Great video thanks , I have a question , what happens when changing the driver door actuator and locking it, I try opening my door and it opens , even tho the locks work my handle opens the truck ! Would it be a bad actuator ?

[@TightWadDIY]

Are you sure the locks are actually locking or are they locking and unlocking really quickly?

[@eddiehuiz]

@@TightWadDIY they are locking correctly same speed all of them, just the driving door opens as soon as I pulled my door handle, lock or unlock still opens

[@pelon4374]

2015 Toyota Tundra do you know the model number mine is having the same issue

[@oliviad735]

what if it’s all four doors? cause i can’t even lock and unlock with my key fob! even tried to reprogram it but still not working so imma get it looked at tomorrow not toyota probably Monday if the place i go can’t fix it

[@TightWadDIY]

Could be the fob or a fuse.

[@oliviad735]

@@TightWadDIY yah cause i tried reprogramming the fob n it still didn’t work even got a new battery for the fob

[@andrewcarwile8499]

Very frustrated.... your video was great. My 2011 crew max is having issues... The drivers door is the only one that works with my drivers switch. The key fab does the same thing. I just changed my rear drivers actuator out... still not working... Any tips???

[@TightWadDIY]

Are you sure you installed it properly? The first one I bought from RockAuto didn’t work.

[@ilovetotri23]

Have you ever tried replacing Serpentine Belt, Tensioner Pulley, & Idler Pulley on said truck?

[@TightWadDIY]

I replaced the serpentine belt but haven’t uploaded the video yet. Didn’t replace any pulleys.

[@ilovetotri23]

@@TightWadDIY Can not wait to see the video! It is my next project.

[@lelandrychel3331]

Unusual situation - my key would turn the lock, but no result. 2012 Tundra. I was ready to remove the lock assembly, until I saw your tip about the key assembly. I took that apart, seemed fine, reassembled just the key lock. Works fine. And it feels different. It now has a solid feel to the actuators. Wonder if it was not seated in the nylon star in the door? Anyway, great tips well done - and you just saved me a buttload of work. Thank you.

[@TightWadDIY]

It’s odd that it would have lost connection but glad you figured it out.

[@antoniotony4201]

Help. I have a 2008 nissan altima rear passenger door is locked up due to low temperatures. Actuator burned out. Can't unlock. It's locked at locked. Took it to my mechanic. Was told had to take it to a body shop. Is it possible to replace the actuator without damaging the door or car? If this happen before on nissans? Thank you. Any information helps.

[@TightWadDIY]

Sorry this happened. I’m not sure how to get to it without being able to open the door.

[@LHall-tu4xp]

Thank you for the video. Watch your video several times that it took me less than an hour to complete. Dealership wanted almost $500 for that service. Great job and thank you.

[@TightWadDIY]

You are welcome. That’s a lot of saved money! I’m glad you found it helpful. I couldn’t find a video showing the whole process so that’s why I recorded this one. I have several other videos for this truck too so make sure you subscribe.

[@HB-kp6rl]

Well. I need them for all four doors

[@TightWadDIY]

I recommend buying them all from actuators plus. I’ve replaced three of mine and they have all worked great.

[@HB-kp6rl]

@@TightWadDIY just order all four from actuators plus and will be replacing them over the holidays. Rewatching this to get a better idea of what im doing

[@deansonte9603]

So it doesnt neef programming?

[@TightWadDIY]

No. There is no programming involved.

[@rolandogarcia7135]

Great tutorial. I removed and replaced. I order part from Actuators plus as recommended but I had same issue. Either they sent me a part that they did not repair or I have a different issue what do you think.

[@TightWadDIY]

I would reach out to Actuators Plus. He was very responsive and knowledgeable when I emailed him.

[@allenwiechmann5953]

I've replaced both front actuators using KZbin , but now I need to replace the rear door lock actuator on my 2012 CrewMax. Do you know if there is anything different in the process? I can't find a video specific for the rear doors on a 2007 to 2013 Tundra.

[@TightWadDIY]

It’s similar. If you’ve done the front, you can do the rear pretty easily. I’ve done one of mine.

[@allenwiechmann5953]

@@TightWadDIY Thanks

[@Oscarflores-gp4kw]

Thanks for your video i have one question you think that a Toyota tundra 2005 it maybe the same process or not

[@TightWadDIY]

It should be similar but know some parts will vary.

[@rickvigil5847]

How do you take the panel off if you're door won't open

[@TightWadDIY]

That’s quite the predicament. I’m not really sure. Sorry.

[@rickvigil5847]

I figured it out rolled the window down took off the exterior window trim that has the fellt that will give you a bigger gap I took a carbin fiber cleaning rod and a flashlight then push down the actuator down opened the door