Tips 🔨👍

[@robtreankler9059]

Retired carpenter of 32 years , have no idea what this would be used for

[@stevecraig-ug3ec]

A youtube short

[@Erikpdx]

Pretty sure it's a joke

[@FredricoMayonetti]

Workbench? Outside storage? Laundry room table? Just because you’re experienced doesn’t mean you live come across every scenario. Young guns have a way better imagination than you old heads.

[@Erikpdx]

@FredricoMayonetti lol, this video isn't anything. It doesn't even make sense structually

[@fproszek]

Hurricane or tornado. ? I saw a home built with a metal strap draped along the roof boards, down the corners and anchored into the ground. Finally, a guy draped 6 long truck trailer straps over his house roof to concrete posts buried in his ground. When a storm is forecasted he clamps the straps in an hour.

[@HueMongus101]

Never notch structural boards. That horizontal 4x4 is useless.

[@frankt9156]

They notch in their video many time. Not sure why.

[@jeffwolf8018]

He made it as reliable as a 2 by 4

[@thatguythatdoesstuff7448]

​@@frankt9156 He does it intentionally. He's trolling so that you will comment. More comments makes the YT algorithm show his videos to more people. More views, more money.

[@toby7982]

Filling the notch with wood restores some of the strength, given it would be compressive

[@HueMongus101]

@toby7982 The forces applied where there is no support under the horizontal beam causes the horizontal beam to flex vertically on the weakest point (the notch). The beam under the notched 4x4 becomes a fulcrum and further increases the stress at the notched point by applying a pulling force at the weak point (the notch). It also has to do with how wood fibers are structured. The way to attach the vertical post and the horizontal beam is to drill or nail without notching. This makes all the force that can be applied to the horizontal beam vertical. Plus it makes the structure faster to build. If you are building like this video and notching your support structures, it can bring down floors, ceilings, and whole buildings.

[@Imactuallymute]

Sacrificial board to fit 4x4? Check. Mounting the brace crooked as all hell? Check

[@odranoelgutierrez5024]

Heaters not welcome this protect its rough construction not finished carpentry look and learn 😵‍💫🤫🤫🤫🤫

[@stephengrenfell1732]

That's why it's called rough construction. Diaz does very nice work

[@JQ212]

When he screwed that brace in crooked, it almost triggered me, lol😂

[@DavidGleeson-k4z]

Yes x Bricky I noticed the brace crooked 👍

[@iamdrock]

It does exactly what they designed it for to last daiz not years 🤣

[@makerspace533]

I had a neighbor that was building a fence. For some reason he thought it was best to notch the 4x4 posts so the 2x4 stringers would be flush. I told him he was making a big mistake. That he was turning the 4x4s into 2x4 and worse he was making a stress concentrator. The first time a big wind came his fence was on the ground.

[@abeeftec]

But a 2x4 fence wouldn't fall from wind unless it was hurricane force winds. Something wrong with this story. If they were secured properly it would make no difference for wind unless a hurricane and then it taking the 4x4s possibly as well.

[@makerspace533]

@@abeeftec If you take a 4x4 and cut a 2x4 notch out of it, it will be substantially weaker than even a normal 2x4. This is because the notch concentrates the stress in that area.

[@2010utube100]

@@makerspace533 But adding the 2x4 crossmember with glue and screws makes in a half lap joint. VERY strong.

[@ed370zx3]

Beautiful workmanship ❤!!

[@danthecarpenterman9463]

I can’t figure out a scenario where this configuration would ever be needed but keep trollin

[@KarlStuart-o2v]

Yeah same

[@thebeast8cunningham643]

Lol For real I'm a 20 year carpenter/framer. I was trying to figure out what the hell is he doing and it ended

[@1eyerasta]

It’s the beginning of a Cherry Picker cause it can lift a motor ☝️😜😂

[@AbbyChau]

後付き梁

[@eagle3351]

Looks like a possible stool for a deck

[@troyjankauskas8944]

I can’t stress enough the importance of that pencil line.

[@andrewsnowball1141]

I love these videos. I learn so much real carpentry from the comments.

[@heckingbamboozled8097]

I think this man is allergic to squaring. Im losing my mind watching this

[@yosida-d5z]

ゆ？

[@yosida-d5z]

ゃ

[@pachalo]

I work for years with guys like this. Proof that Micky Mouse is also found in Mexico.

[@rbbartho1]

Notching the ledger made it weaker. Best to rest it on top of the post.

[@heckingbamboozled8097]

Especially if you're adding a big ass brace anyway smh

[@jeffreybostian8767]

Especially since the joint is so tight the ledger is likely to start splitting.

[@dnsdns6427]

Не правильно делаешь можно обойтись и без железок и намного крепче

[@troyc5994]

The horizontal 4x4 should no be notched but if you do it should be one inch or less. The bracket is useless in this case just glue and screw the vertical posts together.

[@peterreynolds8340]

Why not just put the 4x4 on top of the other 4x4 with structural ties? Seems way easier

[@alanbjorklund6355]

No ooo

[@drbichat]

that makes to much sense

[@igallant]

Love the mix of inappropriate fasteners. This one is legendary trolling.

[@nomad57-u3x]

i will never understand why they notch ( a brand new piece of overpriced wood they just bought)anything and weaken the wood and the structure...

[@FedorovaLV]

А просто прикрепить верхний брус к первому брусу нельзя?! Зачем городить весь этот огород?

[@АлександрПервухин-п5ъ]

Вот и я подумал: "Что за дичь показывают?!"

[@олегжелезяка]

Как это зачем? Человек уголками играется, чё непонятного?

[@И.В.Сталин-и3й]

😂😂​@@олегжелезяка

[@sergeyknysh7367]

Всё-таки комменты на русском более интересны и профессиональны

[@СергейГимгин-з8г]

Задорнов прав был.

[@rheuss1]

Wrong screws, those aren’t Simpson rated they’re too brittle.

[@TheGreatGobo]

Ah yes, good to see Diaz Construction is back at it, trolling the world’s carpenters.

[@horseman62]

love your content!

[@murphymmc]

Looks pretty, it's useless, but pretty for a framing joint. We must assume the ledger board you weakened is purely cosmetic, even so...why?

[@markus.-frank.kumitsch6]

I get You want the x and Y beam in same height (level). Cutting the wall stud a bit to level the one paralleling it as vertical support would have solved that also and a a truss hangar would have been more simple and stable in my hobbyist view.

[@stevewhewell6190]

If this is for a deck it would not pass code where I live. Our inspector would get a good laugh.

[@odranoelgutierrez5024]

Stgo😂😂😂😂

[@terryturman8495]

I was always told not to use screws. They don’t have the structural strength for sheer load . You just can’t trust screws.

[@josesantiago-cl6hr]

I've been a carpenter for as long as I watched this video, and now I'm an expert. Going to lowes to buy me a hammer and get to work..LMFAO

[@frankdahlquist1851]

Don't forget the driver and extension.

[@davidkirby-jx9xp]

Good one 🎉

[@donaldrodriguez3858]

Buenos para criticar algunos ni conocían esa herramientas 😮

[@railtonfeagus8539]

Why not just make the vertical post shorter to start with? The horizontal 2x4 is going to be very weak with half of it cut away like that.

[@og3og394]

ネジ止めじゃなく木組みが見たいな😅宮大工は🇯🇵１だから🤩

[@lisacam2549]

This caught my attention. Love the comments. You really can learn something new everyday if you look for it. Thank you

[@Darren-r9b]

What in tarnation do we have here? Lol! My Shop plans has 40 of these joints.......I'll have $1000.00 in hardware and fasteners! And buy the wood the saw the square the level the hammer the ladder the cute tool pouch the ruler the chalkline the pencil the land to put it on the well the septic the electrical the driveway the cute little yard lamp to irritated the neighbor the endless pint of Bicardi and Mnt Dew the straw to mix it the after dinner blunt comes to $ 367.875.00 to install these stewpid brackets! Lol!

[@hi-ccowboy7983]

I’m building a deck and a very nearly did this incorrectly. Thank you for the inspiration and guidance!

[@ozzy7763]

Please for gods sake do not do anything that was done in this video .

[@12thDecember]

Read the comments and you'll find out why this technique will absolutely ruin your deck.

[@hi-ccowboy7983]

Thanks for the comments everybody. The deck is already complete and we’re having a breakdance party on it this weekend! Can’t wait! Thanks again, @diazconstruction!

[@terryfckwi]

I've been a carpenter for 247 years, I approve of this method

[@luboskurthy843]

Takto hlupo by to ziadny tesár neurobil...diaz je amater

[@garethhancock8525]

Wow , how old are you now then ?

[@jorgegonzalez9911]

😂😂😂

[@zenpo6322]

Gaps make me ANGRY!!! JK Well done! 👍

[@davew7628]

Not a criticism, but damn that four boards took a long time to put up! From sunup to sundown!!!! 😂😂😂😂

[@johnwerahiko6226]

The hammer damages the wood hahahah😂 love all the keyboard trades on here

[@scottclark7559]

I love how it all ends up being like a sculpture built around some random bracket 😂. A true artist at work!

[@yonghsiu260]

2 mistakes: 1-> the horizontal bar has the dent cut too deep , that wakens the bar. 2-> the order of screwing is wrong. The side bean should be screwed first , then the metal angle piece.. Thanks for sharing.

[@euphoria2339]

I swear it’s like you just use the long bit bc it feels satisfying and the noise it makes lol

[@EzekielGage]

Don't you? Lol

[@andrewburrus]

@@EzekielGageguys acting like that noise isn’t crisp as hell…

[@EricRamirez-c3z]

@@andrewburrus crisp as a crispy taco🤭

[@jackhoff2189]

​@EricRamirez-c3z whys it gotta be a taco huh bro?

[@EricRamirez-c3z]

@@jackhoff2189 My bad Holmes. It just seemed to good to pass up.

[@alanajhyman]

Sheesh. You are accurate and on point like a ballerina

[@dr.romeoconfidential9271]

Show me how you cut that notch to perfection 😂 That is way more impressive ! I literally butch it & I’m a carpenter 🫣🫣🫣

[@Ahmed-vf4mk]

Bravissimo 👍🤠💯👍👍👍👍

[@chichard86]

Deck screws for a structural bracket?

[@ВоваКнязев-с8л]

На какой хрен нужен этот геморрой и перевод материалов и денег

[@akiyoshida8390]

こんな家住みたく無い

[@nickatnite9463]

Controversial videos are Gold, and we all just helped.

[@albertonuno1790]

How was the first 4x4 cut like that?

[@bill6732]

Is this exterior? Built against uncovered fiberboard?

[@Truthspreader70]

The biggest question everyone has after watching your videos..Where did you learn Construction?

[@jerryholland2473]

Looks mighty fine

[@sunnyredz]

Troll construction This guy is genius

[@Hisclay2]

Where did the last metal tab come from? It isn't part of the first bracket shown.

[@jamesjones9758]

Ok? The only problem I see is those "fasteners" are higher than the "strap" is. And thus creates a hump in the material placed over it. Counter sunk material and screws would be a better idea.

[@cptlou]

Is this an inside application? Why the treated lumber? If this outside, shouldn’t the wall have moisture barrier between wall and timber?

[@michaelmcmillon5933]

Maybe this is why some contractors are 4x more expensive because they make it 8x as complex 😂

[@latarnickboston]

Tip of the day: use 4x6 at bottom and 4x4 on top and you don’t have to notch anything😂 Diaz Construction is type of guy who pulls shoe laces out of shoes every time he takes them off his feet. Genius.

[@edelmendez-f3r]

BUEN TRABAJO, Y FUERTE. SALUDOS.

[@joebonomono5078]

It appears the hardware on the last horizontal beam is nailed into the end grain of that piece before it's set into place and nailed down. I don't nail into end grain, maybe you do.

[@hulqb.smashing6112]

I figured it out. The OSB is a floor, not a wall...it makes sense if you don't think about it. 😂

[@ИннокентийМохначевский-е8ь]

Красивая работа.

[@janemartin229]

Great ad for Don't Hire Diaz Construccion!

[@davidrhodes7128]

Retired carpenter here too. Useless way to connect a joist, no need for useless metal parts.

[@Mcgweeezy]

Fuck the haters. Diaz for life

[@tyson9419]

Hell yeah

[@MrCryptler69]

"Diaz for life" & your Deck for a week!

[@TravisMagic]

Give Diaz a fish, and he'll eat for a day. Teach Diaz how to fish, and he'll fück up your deck.

[@brebre3582]

Hahahaha

[@shades1959]

That would not pass code in my area. Why and when would you use this?

[@Летодлядетей]

Когда есть лишний материал...😅

[@michaelmcleary8566]

0i can't believe no one has figured this out yet. He's showing off his new drill.

[@joneckberg5819]

Yes but why?

[@ismetfetic2334]

Das ist ⛏️professionell ⛏️👏 Respekt 👏

[@JiriHalamek]

Super práce není co dodat

[@survivalSC]

I have no idea what you’re building, but we do have joist hangers.

[@antoniosilva6532]

Muito bom 😮

[@stilettoswinger7404]

Man,I love this guy.Diaz 2024

[@ЮрийПодлипский]

этим плитам в помещении не место, склеены эпок.или другой смолой.

[@FrankTraverso]

Simpson tie. You got to love em .

[@brambles0077777777]

At this point he's trolling everyone. Even that last 'forgotten' fixing was on purpose

[@VoDiteL_Po_Gybam]

Зачем нужно выпиливать половину доски

[@jpvdw1961]

I've been a journeyman carpenter for exactly zero Fkg years and I have no idea what this is for. But even though I'm half blind I can tell that shite ain't on the bubble.

[@jetvalmonte6574]

IMO, the notch on the horizontal piece is too deep and also too tight on the vertical. But what do I know?

[@JavierBiurrarenaMScMBA]

The first piece is not fully hammered into position. Not sure what is this structure for.

[@mandoreforger6999]

This is classic trolling. He knew that bracket wasn’t level.

[@davidfine9323]

Lol,I would fire anyone who wasted that much money on that😂

[@diffened]

That's why your customers call Diaz after your deck falls over

[@a.t1044]

Ni Mickey Mouse se atrevió a tanto

[@asdfghjk1723]

Да вы гений?????? 1) зачем пропил ? 2) зачем кусок железа? И так всё будет хорошо держатся.

[@jtx-tube]

What’s the purpose of the hammer feature on the drill when drilling into wood??

[@cheeseman9967]

Never notch structural lumber, and if you do, please use a level.

[@frankpascale5327]

Where did that top nailer Flange come from at the end??????

[@helenmonahan240]

My dog really likes this video, but my cat thinks it’s kinda alarming because she likes to sit under the deck and this looks dangerous to her😮

[@paullang1505]

Seems to me it would've just been as easy to notch a 4x6. 🤔

[@codyward8597]

Imagine not putting a level to it at the beginning then you just keep putting it all together lol

[@fakiirification]

then the inspector comes and shuts down your job site because your using the wrong hangers for the application.

[@simonllewellyn1825]

I love Diaz construction. They surprised once by putting something real up. Really messed with my head.

[@Survival_Shelter]

Why didn't you simply replace the lower Board with a thicker one?

[@willmenkwok4074]

Caused a lot of stress when the horizontal berm was not cut out sufficiently to fit the vertical beam properly…. Poor workmanship go back to school

[@TheRoyalrudy]

I'll leave the joint alone. How long did this take. It started all sunny and looked like midnight by the end. He must have used one of those special KZbin wood sawing techniques.

[@peteburns1241]

must be an Oklahoma city carpenter. Apparently the home builders like these guys.

[@SpokenWord4]

over time it’s going to split where the screws are

[@xavierquintana2734]

I was having a good day until I saw this!

[@Salyers-Family-2004]

I feel like I’ve been pranked!🤣😂

[@ryanptimleck]

Man you are slick Diaz!

[@leokeesic3657]

The most expensive way of doing nothing 😅

[@soulsnatcher9228]

The crooked hanger plate killed my OCD

[@afhostie]

Diaz is like tide, every construction video I'm questioning whether it's him

[@kevinknight470]

Someone did a lot of thinking to Engineer that Mess. LOL

[@dmitrikriger1874]

Спасибо, как вовремя 😅