Toolbox and Garage Tour

Here is a quick tour of my garage and toolbox. Below are details about the giveaway and links to products displayed in the video. I have not been paid to display or promote any products in the video.
Giveaway Details:
Giveaway is over and winner has been selected. Thank you to everyone that participated.
Links:
Mission 22: mission22.com/home
Super Clean Cleaning Products: superclean.com/
Combination Wrench Set: www.tekton.com/combination-wr...
Socket Set Bundle: www.tekton.com/6-point-socket...
Impact Socket Set: www.amazon.com/gp/product/B00...
Flex Head Ratchet Wrench Set: www.tekton.com/flex-ratchetin...
Flex Head Ratchet Set: www.tekton.com/flex-ratchet-s...
Spark Plug Set: www.tekton.com/3-8-inch-drive...
Pry Bar Set: www.tekton.com/angled-tip-han...
Kaizen Foam: www.fastcap.com/product/kaize...
Husky Tool Box: www.homedepot.com/p/Husky-Hea...
Blast Cabinet: www.harborfreight.com/40-lb-c...

[@DavidsAquatics]

Tbh I just want to see more videos from you.

[@ronallen5957]

My 1st time shopping by and checking out your videos. Great tour of your garage and all the different tools and products that you have and all the projects you have going on... Keep up the great videos. Have a great day

[@ScroatBagGarage]

Glad to see another video in the shop, very organized! Keep them comming!

[@JaVvii3]

I like to be organized too so seeing the tools laid out on the foam is pleasing to me as well. I would like to see more about the Datsun !

[@jeffparker360]

Thanks for the tour. I’d like to see a video about the process and history of your two builds out in the storage garage.

[@Dman208757]

Love the videos just binged them, would love for you to do a detailing tour and what your favorite products are.

[@red7fifty]

The "Offset" drawer slide, is caused by the middle ball bearing slider skipping, instead of rolling in sync with the other side. A firm PULL at Full Open (repeated Full Pull) will align both slides (for a while at least). You could try some grease on the rails, it might help. My Snap-On box had a few drawers that would do that. F J B

[@roberte8564]

Nice tour! Really liked how you've organized the tool box with the foam. I'd like to know your take on the different brand of hand tools you have. Take care and thanks for sharing

[@cjarloz]

A Datsun Roadster. You sir are a man of culture. Im a Datsun man at Heart. I started with a 70 240z. I have a similar hanging cabinet situation.

[@projectkarr]

Haha that’s awesome. I’d love to have a 240z but they are getting more and more difficult to find. Maybe once I get some of these other projects out of the way.

[@cjarloz]

@@projectkarr yeah i hear you. The Datsun metal was not made to last unfortunately. Id love to get a 510

[@richardbates2367]

My younger brother used to have a 77 280 zx

[@daramill86]

Yes I love using super clean I also love Diablo wheel cleaner sometimes I mix both of them together and use it to clean my wheels ann my motor and stuff when I detail cars or trucks.

[@scottb7007]

Very nice garage setup. I can see how the organization would help save time on projects. How about doing a video on any tool modifications you have done to aid in your projects. Any changes to wrenches, ratchets ect to turn them into a specialty tool?

[@MrSpartanicus]

Guys generally organize for peace of mind and like you said it’s comforting. “A place for everything and everything in its place”. Kaizen foam is great and has its place but if you add or upgrade anything you will always know where it started, lol. Good tour, looking forward to the blast cabinet.

[@projectkarr]

Yes that is definitely a downside of it.

[@jacobbures5793]

Nothing in particular. Enjoy seeing the toolbox progress

[@jaredpearson6068]

I love seeing your tool organization videos, especially the kaizen foam videos. But maybe some detailing videos on your cars would be cool to see

[@brendaowens2143]

Hello, I’m the wife of a life long mechanic. I’d like to see a video on what your top 10 must have tools or what battery tool is the best! I’d love to be put into the giveaway draw. I’d like to surprise my hubby with a surprise.

[@johnnichols7283]

I just bought the same tool box really like it. I also used your link for the krazen inserts

[@rdm1]

Would love to see More Tool Reviews... and maybe a video of you making a KZbin for publication on here, showing what equipment and How you do a review.

[@srojas3534]

Came here for the tekton tool reviews got hooked once I saw your collection of RC cars

[@projectkarr]

Haha I’ll probably have a little content at some point once it cools down and I can run them for more than 10 minutes without them overheating.

[@peterburdick50]

Super clean is good stuff better than purple power. Nice set up. Very functional

[@kammoperformance]

More air compressor details! Keep the content coming!

[@kevinlancaster2230]

I would like to hear more about the tool boxes . And extra tool storage . I am building my own air compressor also . That project is currently on hold as I am in southeast Texas working and my projects are in Colorado . Anyway, would love to hear about the components you are using for your air compressor build . I haven't been with you long as I don't watch many videos but am getting into more for them . What kind of paint guns do you use and do you use a fresh air suit when you spray? I'm sure you do and what brand of air unit and suit . Thanks for letting me rattle ...

[@MikeWolf-427]

Great to a see a new video. I'd love to see more of the Datsun. Maybe videos of some of the build like the "Home Built by Jeff" channel.

[@projectkarr]

I’ll have to check out his channel. Thanks for the suggestion.

[@WorkzGarage]

Your videos are awesome. I'm new to you channel and would to see more about you cars. possibly videos about the goals you have for the cars,

[@TheWaffle2]

Thanks for the tour.

[@hithere7382]

Hey man in 2018 I needed some impact sockets and I bought a bunch of Sunex ones and they work great with the electric impacts at least. I have not tried with pneumatic work. I wish Husky would sell a 72" version of this with a top box but they don't. I'd like to build a shed like that so my friends can park inside when it hails and my wife is home with her car or if one of mine aren't at the body shop or the mechanic. It would also be nice to not have to maneuver bikes around the zero turn to get out of the attached garage. Plus if (the battery electric) zero turn catches on fire it would not be nearly so close to my house as yours lol.

[@coreybair9426]

I would like to hear more on your plasma cutter and hvlp guns. I like all your videos though. Keep'em coming.

[@c-note4146]

Few months ago you showed us the foam inserts layout. Did you end up researching labeling options? Thanks for the sweet vids

[@draffa5798]

For a DIY guy you have an awesome setup. Puts mine to shame lolol

[@calebs.2166]

Hey Project Karr, I'm looking at utilizing some Kaizen foam to organize my tools. Do you have a list of tips on how to "future proof" your foam layouts? That way you can add additional tools and materials in the future without necessarily having to re-cut an entire drawer worth of foam. I have some ideas but I'd like to hear yours. Also, I use Super Clean all the time for cleaning and degreasing! It's a good product to have! I typically spray it on with a spray bottle or in a pesticide spray canister depending on how much surface area I am trying to cover. The only precaution I take is to not spray and/or leave it on painted surfaces as it can be damaging. Great videos and I've really enjoyed your shadow foam tips and techniques!

[@freethinker5225]

If you could do a everyday carry tool box like an absolute must have to-go bag on tools you know you'll need and would and could easily bring with you in a semi small package

[@phaovang8901]

Want to see more of the Datsun!

[@austinwheeler3602]

I would love to see more tool hauls

[@mikethelandscaper41]

Have to figure out how to use kaizen foam in my toolboxes. Lots of tools but everything moves around. I also always look for good products that actually work.

[@ryanhansen3350]

Nice setup. Love tekton

[@johnnyspencer4329]

Awesome shop man

[@ralphramsey3422]

Like to see a long term tekton tool review.

[@calebikner4925]

I’d like to see more tools like the hart ratchets and Milwaukee wrenches and tool box and cart comparisons like store brand vs tool truck boxes and carts

[@fishingmontana1564]

Let's see more of the project cars

[@nutzboltztoolz2734]

Nice setup 🤘 I just subscribed

[@Cbsaiyan]

Best way for a small toolbox to sort metric and sae wrenches and sockets?

[@richardbates2367]

What brand brake flaring tool set and what brand flare nut wrenches do you have sir?! And the Datsun roadster will make a neat cruiser when you are done with putting it back together!!

[@a2gymnastics834]

More videos of the Datsun roadster.

[@atlanticyak2069]

Nice collections kiddo. Get the compressor tanks outside though, if you value safety for you and thoes who work around the garage you need to do this. Please do yourself a favor and do a quick video search here on KZbin. They crack from the insideout. I've seen nice looking and not that old go from (working fine), no leaks to garage bombs! Best of luck

[@rodneywager2142]

Very organized, and buying new tools never ends. Lol

[@projectkarr]

Thanks and so true.

[@kkutube1972]

Thanks for sharing.

[@lukep7381]

Would like to see a review on the Titian screwdriver set and also would like to see a video on how you cut out your foam for organizing the tools.

[@projectkarr]

kzbin.info/www/bejne/mHOQnGOBhclmnsU This is a link to my video about cutting out the foam. Hope it helps.

[@johnwilliamson9453]

How do you do the foam for the wrenches, custom fitting?

[@fmiller5704]

Good for cleaning tools

[@christopherbrown6493]

Do you have a kit you keep in your daily? Just curious as I’m not seeing that as often.

[@richardbates2367]

I actually got a license plate like the parking sign on a 84 Buick regal I got ahold of for parts..

[@johngurkins6676]

Would like to see a review about titan tools you have used

[@gynn4622]

Nice!

[@marcwerth1857]

Sweet little giveaway. Is that a HarborFreight blast cabinet? I’ve been looking for one but since they did away with their coupons I don’t really go there much anymore.

[@projectkarr]

Yes it is and same for me. I look at their instant savings whenever a new one comes up but it’s usually nothing I need. Big mistake on their part in my opinion.

[@JonesingForTools]

@@projectkarr I use to go to Harbor Freight several times a week to get free stuff, now I only go like once a month. They made a huge mistake in getting rid of the 20% coupon.

[@richardbates2367]

Titan tools makes some decent stuff and my sunex tools comfort grip handle screwdriver set looks very similar except for the Red and black comfort grip handle

[@tonywilson5666]

how about a video of how you cut out the foam for your wrenches and sockets?

[@eddie_lee6587]

I like them cabinets

[@ragincajungarage]

More on your toolbox as u fill it up

[@Dota-Music]

really interested in a review of super clean

[@beanman561]

I use super clean product to clean outside my stainless steal pans I use in my smoker. It makes it easy ckean up on the pans

[@Dota-Music]

@@beanman561 I am looking to do clean a diesel engine with a lot of dirt and grime. How does it work for heavy duty cleaning?

[@projectkarr]

kzbin.info/www/bejne/hKrJpoekod6BkJo Here’s a link to my video where I’m using super clean to clean the engine of my Duramax. It worked great.

[@DanTastic66]

Your tools ROCK @!

[@mrtrader4628]

Hey this is not for sale anymore can anyone tell me what SKU is for this module? Husky stop making them with two power rails so I'm trying from one of last years box. Can you please put the sku here.

[@marauder2525]

I would like to see you fabricate those things you can't buy, are too expensive to buy or are just fun to fabricate.

[@EffingWhiteMale]

Ernst 6050 makes angled wrench holders

[@davidgunnels2391]

I want to know what all you did to Frankenstein that air compressor

[@projectkarr]

Should be in next video

[@richardbates2367]

More on your Titan brand and tekton tools .

[@nednedly3962]

I'd like to know what the story is behind the new socket sets in the next to last drawer shown.

[@projectkarr]

I actually bought all the chromes when I started the Datsun. I’ve mainly used them for installing new hardware which is why they look new still. I have my old sockets for all the dirty work.

[@ethansmith8813]

Try a tool review comparing stanley craftsman and sears craftsman

[@williamduff9296]

Those screw drivers look like yellow sunex!

[@kelstr]

Where the hell did you get those foam inserts?

[@projectkarr]

I cut them from kaizen foam I purchased from fastcap.com.

[@eshamblazer]

Show us your guns!

[@Forged407]

Fucking rad bro

[@md.salimmorol.1388]

Ined this pairch

[@bluecollardiyer7248]

Am i a dewalt fan boy????...... well yes. It's better than when i was a broke, black and decker fan boy.

[@jchrg2336]

Dirty deeds, so you do also have some more dirty metal working tools, hehe

[@ihavethedocuments2580]

Why you so sloppy bro? Lol. Just kidding 😂