Top 5 WORST Mistakes That Almost All Cubers Make

[@dragonslayer0341]

7:55 I think this line got him a couple dislikes. We all know who they’re from. (Pro-Disease people)

[@dragonslayer0341]

Thanks for the heart Brody! Love your content

[@BrodytheCuber]

#VaccinateYourKids

[@skilless935]

The fact that this has a heart and a pin but 3 likes...

[@underratedsounds2797]

the earth is flat and vaxines give autism

[@dragonslayer0341]

I just realized I should’ve made this comment with my channel account. Would’ve been great marketing. PS - it’s 3Moves Cubing if you’re interested

[@BrodytheCuber]

Hey everyone! Fun fact: I've had the idea for this video ever since I made the original 10 incredible techniques video. I've just never gotten around to finishing it until now! I hope you enjoy!

[@icube6514]

Please make another "10 incredible techniques to help you get faster at 3x3" video! I like them so much, I know, it could be difficult to find other practice techniques, because you already made two videos about it, but if you can: pls do it!

[@fireburst1760]

Is it bad to use back slot insert with Fw moves rather than using b moves or should I just rotate?

[@BrodytheCuber]

@@fireburst1760 it's fine to just rotate

[@Czssini]

7:56 *SHOTS FIRED HOLY CRAP*

[@tehyoshi]

Shots administered.

[@suneisnubyt2458]

lol I love it

[@Czssini]

MARUU LKUR what? Im so confused.

[@bdcubing8845]

I'm starting to think you made this video just for me...

[@ringor5410]

Wrong! It was for me!!

[@bdcubing8845]

Yeah...

[@gansair6050]

Yeah...

[@gansair6050]

@@bdcubing8845 I though I wrote that and forgot

[@isac.2h]

IKR

[@TerraSept]

I'm not scared of about anything, but that thing *Glances to F2L* It scares me

[@kenzieberumen3578]

YES! SOMEONE UNDERSTANDS ME

[@Wooweewoowee]

Saxicus yeee

[@scruffysz]

Saame

[@gamesarecool113]

Its easy to learn

[@gamesarecool113]

You really just need to understand it

[@aditsu]

5. Poor turning - guilty, not sure how to improve. Guess I can start by watching what you do there at 0.25x. But I'm not looking forward to any D moves, let alone pushes (shiver). 4. F2L tunnel vision - not guilty. 3. Not using inspection well - not guilty, but I have a different problem: I could spend 30 sec and still not be able to fully plan the cross in some cases. 2. Cube rotating too much - guilty. I mainly cube rotate to look for pieces. I knew the edge orientation identification, however there are 1 or 2 cases where the edge is oriented but it takes either a horrific number of moves or F/B turns and stuff to solve the pair without cube rotations. 1. Inefficient F2L - somewhat guilty. I definitely don't know how to use different F2L solutions for the same case. But I think I mainly struggle with a) finding pieces and b) quickly figuring out how to solve them. Thanks for the video!

[@henryharris7745]

aditsu that basically sounds like me XD

[@24week61]

Henry Harris I’m so quilts with the poor turning one because it feels uncomfortable to double U’

[@Furansowakun]

Same

[@aditsu]

@@yoruba7807 I currently average about 40, with a PB of ~22

[@syeduzaerali7998]

You are still beter than me

[@ab-mn1ps]

Faster cross to F2L transition? Easy, don't finish the cross.

[@thewhatwhat12333]

Ah, i see youre a man of culture as well

[@jordanfunnii]

Sometimes i dont finish the cross and finish the cross halfway F2L

[@not_vinkami]

Laugh in roux

[@fortnite-exe207]

Thanks for the tip but how do I do f2l

[@sarwataftab2845]

I know this is a joke but freefop

[@TheTurt1e9]

when you only know beginner method... Me: *nice*

[@xviqeos9533]

The Turt1e9 on god 🌮😂

[@Mecal21]

Yoink

[@rajneeshshrivastava965]

@Joao Lucas Bastos how do you do it

[@DryingWall]

@Joao Lucas Bastos its way more common

[@sm64guy28]

Dude my F2L are so inefficient my wooden pickaxe calls me slow

[@isblk8178]

Lol

[@tbrody846]

using shears on obsidian

[@convergentradius]

At least my f2l is like a diamond pickaxe on obsidian.

[@polidon1577]

Bruh my f2l is less efficient than mining bedrock throwing eggs

[@TheNova9572]

using nothing on obsidian is bedder than my F2l because i can't solve a cube

[@queijoduke]

I literally got my pb avg (10.79) immediately after watching this video. You're a great help Brody!

[@anguscos4506]

The "do you need to rotate" and "trigger insert" rules for F2L are God tier, thank you so much!

[@anshumanagrawal346]

It's Not Quite Right Though

[@anshumanagrawal346]

What about the triple Sexy move case?

[@peterosudar6653]

As an educator, this video demonstrates a ton to consider when providing advice to others but most of all it begins for a formal definitions of what precisely is being done, mathematically, when working a 3x3. Brody, as you continue your work its very clear to me that the mathematical content will be the next step in your evolution as a content creator with regards to the cubing community. Hopefully your progress and success as a creator takes you to new places that everyone is very excited to learn from and with you during your journey. Thank you for all you do.

[@KuIJohnQ]

8:54 The example you used for more advanced solvers' inefficiencies blew my mind. Have you thought of making an entire video on these kinds of things? Or maybe a video on optimizing edge orientation while solving the last F2L pair (to avoid dot OLL's, for example)? Just some ideas. Great video, and have a nice day!

[@CraterCuber]

"F2L inefficiency is more widespread then measles in an anti-vacs daycare" Comedy at it's finest.

[@Lxyaltyhvh]

Spelling at it's finest.

[@antoinejohnson6847]

Truth at it’s finest*

[@Gruskinator]

Grammar at its* finest.

[@berrithoughtfull]

Grammar nazis at it's finest

[@CraterCuber]

I know my spelling isn't the best.

[@Brutal_Slam_]

You have NO idea how much I agree with this. I’m part of some fb groups and almost on a daily basis, there’s always someone posting a video of them solving a 3x3. Bit it drives me SO crazy seeing the bad habits that they exemplify. Especially the cube rotations. Your channel is extremely constructive and educational and I’ve been a fan for a long time. Keep it up Brody!

[@PikaChu-um2gt]

Why don't you kindly tell them to stop rotating?

[@kyongu375]

same im in some fb groups with people posting their solves. But i would comment on it when i get a chance and critique their solves to help them

[@Mateus.007]

Bad turning is worse.

[@stevie466]

6:20 that's algorithm new for me

[@jackeea_]

Me: has never picked up a cube before KZbin algorithm: yyo dude u gotta see this shit

[@Caydenhang142]

Lol

[@ItsHexa18]

Dude. Thank you sooo much! I really improved from this and am now really starting to see my times go down. Tysm cuz I’m going to a comp very soon and now i’m very ready. Thank You!

[@Procrastinacion_]

THIS IS THE VIDEO THAT I NEED. I LOVE YOU

[@nichoIas_]

Arrows in thumbnail, 10 minutes long, lists... I see you are a man of culture

[@noviacatnopbleu650]

my boyfriend: THIS IS THE VIDEO I'VE BEEN LOOKING FOR!! He did an official competition 5 years ago and still needs improving Gave up on sub 15 after an incident and now he's not even sub 20 again Thank you for this video I think he is alive like a kid again

[@SJ-pt1wy]

I can't even properly sub 30....but i haven't goven up tho

[@elijahstroebel]

You are awesome thank you so much! My times jolted by a whole 6 sec after watching this!

[@ssw4m]

This video is super helpful, all the best advice for beginner / intermediate solvers in one place. Thanks Brody!

[@raphaelweis4674]

I think this is one of the Best cubing videos I've seen. You help all level solvers with your tips that you make easy to understand. I also really like the background music. Good job !

[@lutheraugustine1247]

This here is why my f2l takes up 20 seconds . I've learnt that I probably insert and pair up inefficiently. Thank you !!!

[@tq6668]

Your welcome, love your vids

[@ΓΙΆΝΝΗΣΤΣΕΡΩΝΗΣ-υ1ψ]

I think i do less rotations than i should. I use some really wierd finger tricks and B moves just to avoid rotations. Also a tip is that if an f2l insert is more than 8 moves, there is probably a better solution, unless it sets up a different pair

[@fraggzt]

Now, that's a damn helpful video.

[@matthiasbentley3781]

This video was amazing. most of these things didn't apply to me but i stil watched all the way threw. The content and presntation is great. You sound very natural and the editing is very good. Just thought I had to say

[@singhavinash76]

Man you are the best adviser. Better than J Perm. One question I have got only three sub 20 solves in this 1 year and I'm good at F2L solutions but I can't get under sub 20. How should I get there?Should I Look Ahead now or Get into learning Full OLL?I know Full PLL. I know all the fingertricks and execute it in my solves when it comes. I have made some F2L and OLL Algs Myself and it's takes almost under a second to do my own algs. Hope you read this. You are the best.

[@bruce1170]

Perfect Timing! i have a comp next weekend

[@saikatkar6717]

Truely usefull things!! Brody is amazing!!!

[@6stringcuber683]

I really like the inspection tip

[@oOManbearpigOo]

Awesome video man! I learned a lot, thank you!

[@bloxyyt]

Awww you made a video for me?!?!

[@JawshFGC]

Great video definitely going to work on those suggestions

[@badandslo]

This is a great video and very useful, appreciate the work and effort❤

[@sierrakoral9894]

Thanks so useful! I really needed this vid and am just a beginner but you have really helped me cube faster.

[@Joanyan]

7:56 Oof

[@reetracted]

Oof means money

[@HyperCuber]

Number 1 and 2 are the ones that will really help me

[@cubed3018]

Great video! Definitely something that anyone can learn from.

[@abstrxctionmusic]

I own an Angstrom Gan X and I main it. What other lube should I put on after it wears out?

[@sebaaco113]

About using the whole inspection: I learned to do this the day I was Judging Michał Pleskowicz's oh solves at GLS Gdynia 2020. Dude literally started all of his solves using like 14.9x seconds of inspection, but never went past 15. Of course he won that event

[@MBrady1970]

I'm trying to learn proper finger tricks and turn properly so I've had to print out my algs again. Never realized how much I depended on muscle memory, but its something I have to do if I want to get faster.. Thanks for great videos, your the only cuber I have notifications for.

[@TchakalGames]

You are helping me too much. Thanks for the videos and keep going with that kinds of videos. I am Brazilian, and my English isn't very good. But I am trying to understand you the most that I can.

[@codingvio7383]

0:17 I learned how to do that today. And it probably saved me 12 moves to a solved state

[@ahmedkamal5117]

Yell me it

[@ahmedkamal5117]

Tell me it please i cant see

[@LiamsCR]

this is one of those times where a top 5 video is allowed, great content

[@cheeseburger5716]

I finished reading the description, and I’m glad someone has told me that I’m awesome today :)

[@jonahjarvis7614]

Great video! Very useful concepts for everyone!

[@jedskillz]

Dude. Great content! Nice editing and you sound really professional! Subscribed!

[@ohiodevildog85]

On point as usual. I have a lot of work to do.

[@cathywierckx7031]

Awesome!

[@NocturnalIDK]

Brody is one of the best pro cubers that make tutorials and also has a lot of subscribers!!😁😁

[@stephonramnarine714]

wut about jperm lol

[@edricsachio9451]

the best video ive ever seen from ur channel, even i average around 11-13, still i love this so much

[@ePocalypse]

I am guilty of all the mistakes mentioned in this video. Number #1 Mistake of F2L inefficiencies, I am guilty on all counts. It takes me over 20 seconds during F2L process and I average 30 seconds ao100. The F2L Struggle is real. SMH. Thanks BrodytheCuber for making this video.

[@shuochen1689]

Nice video!

[@ruchirrawat8804]

This video was very helpful Thank you for sharing this 😊

[@quinn4533]

Hey Brody! Just wanted to say thank you for signing my stackmat at Great Lakes Champs this year!

[@PaisCuber]

The best videos, yours !!

[@jvdarwinGAjr]

This video hit me hard. Thanks Brody. From now on I will be following you. Hopefully soon I can change my bad habits and be sub-15. That's all im asking.. -A cubing fan from the Philippines.

[@joshuagabel1717]

Great content, earned a subscribe. What's your Gan setup?

[@BrodytheCuber]

I'm pretty sure it was just whatever was in the cube when I got it. I didn't really change anything

[@galaxystargaming1008]

Thanks for this so much

[@anguscos4506]

This Video is great, Keep it up!

[@CubingFox]

Thank you! I'm a very inefficient solver. I average 55 seconds with my PB at 32. I will be taking your tips into heavy consideration. Lots of practice is coming in the near future for me.

[@leonindustries4706]

Lol same

[@rubiksmaster4849]

Yo Brody. What cube are u using??

[@3timesleft583]

Subscribed. :) Also I'm a fresh starting beginner, what apps do cubes use usually for time keeping/time records, algorithms and whatnot?

[@NetanelColish]

Thank you!

[@tjarlie8092]

Thanks Brody!

[@RandyDaGamer]

I enjoyed it and you earned a sub for this awesome video 😁

[@GeometryDashProgam3r]

5:05 - 6:27 **laughs in ZZ**

[@Coolms9]

*laughs in Roux*

[@itachiuchiwa777]

you are really amazing! thank you so much. I am so frustrated because I am so slow in solving cross and f2l. would you make a tutorial in a pdf please?

[@w.greatz1]

Very good video! Just one question: What settings do you use for your Gans X? I can't find the right tensions that suit me, so i'm seeing what professional cubers use

[@dmccubez2695]

Very helpful video especially for beginners and!

[@DimiDzi]

when someone knows how to solve 3x3x3 but hears something that is making him feel like knowing a language without knowing it's grammar rules but still use them correctly

[@LukeTCC]

so ive been sitting here for quite a while trying to work on my inefficient f2l when this video comes on via autoplay. i usually play random cubing videos while i practice to fill the space in my brain. anyways, i thought your last tip was pretty neat consider what i was doing at the time.

[@Nestqwik]

I have only one hand and I can finger trick a little but if it helps others. Don’t be discouraged on solving fast because you are missing a limb. You being disabled has nothing to do. You might be the fastest disabled solver in the future and you don’t know it because your being discouraged by the littlest of things. I’m trying and I’m still around a 1:00 average with beginners method and now learning cfop meaning I can cut my time down more. Just practice whatever is comfortable to you. Then you’ll be a fast cuber in no time 😁🙂

[@hrishikeshwamankumbhar7645]

Ty man 👍👍 for the tips

[@foosblood24]

9:49 Brody, can you link that page please?

[@el_sancho_2094]

8:00 DAAAAAAYUMMMMM haha wasn’t expecting that. You sir make me laugh 😂 quite a bit, love your videos

[@coolliechtenstein9090]

Wow. Amazing video !! :D

[@itze_]

ACTUALLY HELPFULL

[@mortalzcubing1714]

Nice background plugin brody

[@porkchopsofficial4666]

That was a pretty good vd ,nice man

[@cubeur4261]

Love your style boy...

[@wesmokediesel]

*this video just called me straight garbage in 7 different languages.*

[@amateurapple]

I don't do cube rotations since I use Roux, but Second block look ahead is a bit difficult

[@727-]

Skip to 10:33 to see my comment.

[@el_sancho_2094]

Zenvy Cuber awesome

[@21croz]

I know a lot of f2l algorithms, but when I start solving I get nervous for finishing it asap, so I start rotating or pausing so much. How can I improve? Greetings from Chile!

[@eternalrewind2190]

This is great. Ty... Trying to be sub 20.. f2l is the hardest and to many rotations

[@thricken123]

I m sub 15 with two look OLL and advanced PLL.Should I learn full OLL to be sub 10.

[@codeskills1171]

Cubing without a mat hurts... Btw, great video as always!

[@gageleffert3374]

Hey can you make a video showing certain things people can do wrong and how they can improve that because I’ve been cubing 8 years and I’m 11 1/2 and I still struggle to memorize certain f2l cases and I know you made a video of that and I’ve watched all your videos and they really didn’t help with the situation I’m in and I’ve spent a lot of time practicing over this quarantine thing and I’m trying very hard and my dad doesn’t really like that I spend my time cubing gaming and hanging out with my neighbors and that makes me want to stop and then I watch your videos and keep going because I realize that as long as I’m happy that’s all that matters😁

[@tjryan339]

Today in skewb I got a nr with a 5:39 AVG and podiumed

[@BrodytheCuber]

cool!

[@MCubes]

Tj Ryan wut which country do you live

[@tjryan339]

@@MCubes Ireland

[@ravikiranb6881]

D2 flicks are so damn hard

[@lumi2030]

FINALLY SOMEONE WHO SAID IT

[@aleczamperinsphotography739]

At 2:00 it looks like there isn’t a back left peace because of them table 😂

[@bartoszmichalik4125]

Thanks for the video man!. Can I ask you what is your setup on the GAN 356 X? I can't get myself to like mine so maybe I could try a setup that you like

[@BrodytheCuber]

I just put traxxas 50k on the pieces. I haven't done anything else to it

[@bartoszmichalik4125]

@@BrodytheCuber What about the nuts and their tensions?

[@user-wo4vo5nz8e]

Before I just use the beginner technique and came to the PB of 23.7 seconds on that time I don't even know how to use the both hands with 4 fingers at the back and the thumb in front I really don't know how to do it. But not I'm not cubing anymore but I'm planning to go back cubing. Also my cube before does lock often, can't perform a corner cut, not smooth and unstable. But I love it.

[@xAntisune]

4:10 Brody using 4 seconds of inspection:

[@prenumenume6597]

4:42 ZZ-Top solve!

[@kemonpo7147]

0:35 -Cubing Encoded-