Torsion Box Workbench & Assembly Table / Outfeed Table with Storage || How To Build - Woodworking

** Plans: www.bevelishcreations.com/pla... **
Article 🡆 www.bevelishcreations.com
Hey guys, in this video I will show you how to build this workbench / assembly table / outfeed table with a torsion box top. The torsion top will provide a rigid and flat surface for all your assembly needs. It also has a ton of storage, with 7 drawers and three cabinets, there's room for just about everything!
| FOLLOW |
► Instagram | / bevelish_creations
► Facebook | / bevelishcreations
-------------------------------------------------------------
TOOLS / MATERIALS (affiliate)
■ Microjig Gripper bit.ly/2WHpUu0 (Affiliate)
■ Microjig Gripper Blocks bit.ly/2Vpv8dN (Affiliate)
■ 21.25" Drawer Pulls amzn.to/2XFIumr (Amazon)
■ 10" Drawer Pulls amzn.to/2LJbzuS (Amazon)
■ 20" Drawer Slides amzn.to/2YMesyL (Amazon)
■ Pocket Hole Jig amzn.to/2BdBS6G (Amazon)
■ 1-1/4" Pocket Screw amzn.to/2X2i0ws (Amazon)
■ 5mm Shelf Pegs amzn.to/2XGT01R (Amazon)
■ Kreg 5mm Shelf Pin Jig amzn.to/2YMWlsx (Amazon)
■ Kreg Door Hinge Jig amzn.to/2xJpx7S (Amazon)
■ Inset Frameless Door Hinges amzn.to/2XEyeQd (Amazon)
■ Edge Band Trimmer amzn.to/2RZ2hiK (Amazon)
■ Edge Banding amzn.to/2sZPs95
■ Flush Trim Router Bit amzn.to/2ErVB5G (Amazon)
■ Leveling Feet amzn.to/2S1W7yC (Amazon)
■ Workbench Casters amzn.to/2GopGUB (Amazon)
■ Caster Quick Release Plates amzn.to/2SKyASg (Amazon)
■ Incra 1000HD Miter Gauge amzn.to/2QMpyzP (Amazon)
■ Roundover Bit Set amzn.to/2D1X6FG (Amazon)
■ Incra 5000 Miter Sled amzn.to/2N6pLwN (Amazon)
■ Festool Tracksaw amzn.to/2UUbXIo (Amazon)
■ Festool Router amzn.to/2UWvsAb (Amazon)
■ Bosch Router amzn.to/2BCPGrw (Amazon)
FILM GEAR (affiliate)
■ Main Camera amzn.to/2RYqjWS (Amazon)
■ Main Lens amzn.to/2DIjZQb (Amazon)
■ Beautyshot Lens amzn.to/2Dr0r1z (Amazon)
■ Beautyshot Lens #2 amzn.to/2DnLxcC (Amazon)
■ Joby Gorillapod amzn.to/2TlG0sm (Amazon)
■ Slider amzn.to/2TjKvDS (Amazon)
■ Gimbal amzn.to/2qOSmwp (Amazon)
Disclosure: Links in the description box are affiliate links to Amazon. As an Amazon Associate, I earn from qualifying purchases. There are no additional costs to the buyer.

[@BentleyDesignCo]

I love the continuous grain down the front of all those drawers. With a project this big, it really adds beauty to this functional work-piece! I would love to make something like this when I get a bigger shop area! Great work Alex!

[@BevelishCreations]

Thank you so much! I’m glad I went with the continuous grain, even though it’s not as efficient use of materials :D

[@Wood_Slice]

THANK YOU FOR YOUR RECENT IG post telling us about yourself. Love your tools as stated (festool, woodpeckers, etc)

[@BevelishCreations]

Haha thanks man! I have a sponsorship from Woodpeckers. As for Festool...once u get one it’s hard to get anything else lol

[@robsandstrom9854]

Well done Alex. I have appreciated your comments and helpful advice for many on other Social Media sources I have seen you comment on. Good luck on sharing your journey and building a community of people interested in following what you do.

[@BevelishCreations]

Thank you!

[@DavidKirba]

Hey Alex, great job and great to see another video from you :) This is definitely on the list of shop projects for when I have a proper work space of my own!

[@BevelishCreations]

Thanks!

[@SouthernStyleDIY]

That might be the best looking and functional workbench I’ve ever seen! Great combination of the two

[@BevelishCreations]

Thanks man

[@didz2064]

That slo-mo kreg saw dust shot reminds me to always hook up the dust collection first!

[@BevelishCreations]

Haha

[@cadd9511]

Wow, badass workbench! Crazy skills!

[@BevelishCreations]

Thanks!

[@pianova5825]

The best Outfeed Table on KZbin! Awesome :)

[@BevelishCreations]

Thank you so much!

[@CowDogCraftWorks]

You the man Alex. Like the way this turned out.

[@BevelishCreations]

Thanks Chis!

[@ashleyreeves8448]

Such an awesome build and has given me a lot on inspiration for my new assembly/flattening table I want to build

[@sgttsmitty]

Fantastic video, great camera work & editing, perfect music choices, and a beautiful end result. Instant subscribe.

[@BevelishCreations]

Thank you!

[@christofix]

Realy beautiful and handy workbench! Great build man!

[@BevelishCreations]

Thanks a lot bud!

[@benbuckley2738]

About time somebody uses shellac! I love that stuff!!!

[@BevelishCreations]

Hahah

[@GeeksWoodShop]

You are rocking it this year Alex!

[@BevelishCreations]

Thanks man! Hopefully I can keep the train rolling!

[@jbrunken]

Great video/build. Exactly what I'm looking for in a CNC table. Thanks!

[@BevelishCreations]

Np!

[@gt2scale]

Nice build! I really liked that drawer assembly montage affect.

[@BevelishCreations]

Thank you! Glad the time it took to edit that wasn’t a total waste :D

[@JPToto]

As usual, very nicely done! Taking some notes for my future assembly table.

[@BevelishCreations]

Thank you :)

[@EthanCarterDesigns]

So awesome, Alex! The hardwood trim adds such a nice look!

[@BevelishCreations]

Yeah it adds a lot to the workbench! It was a lot of wood though haha

[@EthanCarterDesigns]

Yeah, but you'll appreciate it every time you look at your bench I bet!

[@robertw.1499]

A real joy to watch. The carpentry, video editing and cutting, superb. Nice narration too 👍

[@BevelishCreations]

Thank you!

[@ZacJones]

Great build and nice channel! I really like the top and the handles you put on this assembly table!

[@BevelishCreations]

Thank you so much! :)

[@hmsiegel79]

Nice job Alex!

[@BevelishCreations]

Thank you :)

[@congruewoodworks1474]

Great build man!

[@BevelishCreations]

Thank you! I’m glad you enjoyed it :)

[@jaykepley5238]

Nice job!

[@BevelishCreations]

Thank you :)

[@BookofIsaiah]

Awesome design and great build!!

[@BevelishCreations]

Thanks!

[@achavedeacesso]

It is really nice when he shows us his own mistakes. Thumbs ups!

[@BevelishCreations]

Thanks :)

[@Heatsauce70506]

Wow, that is so beautiful it can be used as a center island in a kitchen. Well done.

[@BevelishCreations]

David Abercrombie thank you! The top is super nice, I don’t want to use it haha

[@paulbull1993]

Great build and looking forward to future builds. Thanks for sharing mate 🇦🇺🇦🇺

[@BevelishCreations]

Thank you!

[@kyuma401]

I've been waiting for this!

[@BevelishCreations]

Thank you!

[@befmx31]

Beautiful piece of shop furniture.

[@BevelishCreations]

Thanks!

[@ClevesBackyardWoodworking]

Sweet table man! you have great skills!

[@BevelishCreations]

Thank you!

[@jonscott07]

what a trip, I've never seen pocket holes drilled in that L pattern on the corners. Very clever!

[@BevelishCreations]

Thanks man! Glad you enjoyed it!

[@furthernorthfab]

Nice work. Walnut trim is a nice touch.

[@BevelishCreations]

Thanks Kris!

[@lukemartin9037]

Love it! Wish I had the space for something of this size.

[@BevelishCreations]

Size can always be adjusted :)

[@jjcavins8312]

Great work duder!

[@BevelishCreations]

Thanks!

[@sumandl]

Look's amazing! Nice shop 🤘🏼

[@BevelishCreations]

Thanks!

[@TheTranq]

Awesome build man. I gotta make something like this soon !

[@BevelishCreations]

Thanks man! Really appreciate it

[@rml3wood]

You’re a very talented guy.

[@BevelishCreations]

Thank you sir

[@accountshanahan]

First of your videos I've seen. I like the pace of the video, it's to the point and doesn't ramble on. Some other channels would drag this out to a 30 minute or even worse a 2 or 3 part video. Good work and I'm now subscribed!

[@BevelishCreations]

Thanks!

[@chm1701]

A great result, Alex. Such a clean and simple design, with a really nice clean look. I really like the overall look. I’m not too sure about the handles, but that’s just a personal choice. However, the Walnut edging really sets it off and finishes it perfectly👌 I’m currently working my way through your videos and I’ve nearly watched them all. You’d best start making more projects, so I have more to watch 😉

[@BevelishCreations]

Thanks man!

[@RISENGRINDWORKSHOP]

Really enjoying your content and can appreciate your camera work and high end setup. I typically shoot Real Estate video's and recently decided to carry that over to my own KZbin Channel. I love this hobby and plan to make some video's complimenting your work. Specifically the Harry Potter Shelf. I have a Niece who will love this piece. Thanks again for all the video's from one creator to another I know how much time this takes!!!!

[@BevelishCreations]

Thank you!

[@justsapinis9185]

Good work!!! I can't wait to build this bench in my first shop...

[@BevelishCreations]

Thank you! I actually think this would be a great workbench for a first shop and can last a long time!

[@justsapinis9185]

@@BevelishCreations And it can be preaty cheap

[@LTDWoodworks]

Very nicely done!👍 And your filming and editing as usual get a perfect 10 score👍 Maybe start an on line course on how you film and edit 😉

[@BevelishCreations]

Hah thanks! I’ll think about the filming course haha

[@thorlo1278]

Great build! Very nicely made. Thumbs up, and liked.

[@BevelishCreations]

Thank you!

[@AtticusDraco]

1st time viewer Nice project,, good work Enjoyed the show

[@BevelishCreations]

Thanks!

[@kerbyfab]

Awesome table... Subscribed

[@BevelishCreations]

Thanks!

[@outlawjjwales]

Very nice👍love the video

[@BevelishCreations]

Thank you!

[@bobt2522]

This is a well designed bench and it looks very nice. I like your video editing and the pace of the video. I like your speaking voice and the music, but I would prefer the music volume not be louder than your voice.

[@BevelishCreations]

Thanks for the input. I thought I adjusted the music so it’s lower than my voice though

[@mattg6262]

Hey Alex long time no see..I had to take a break from FB for awhile glad to see you're keeping busy. Look terrific keep up the awesome creations.

[@BevelishCreations]

Thanks! :)

[@mikeandlucky]

Congratulations on your excellent KZbin channel. You have some of the best production skills I have seen. I appreciate the complete list of tools and plans and superb video.

[@BevelishCreations]

Thank you! :)

[@daisycorta3340]

Dope

[@BevelishCreations]

Thanks

[@j316finewoodworking6]

Very nice 👍

[@BevelishCreations]

Thanks!

[@maurolimaok]

Look, I don´t have money or tools, just the imagination. I was wondering a workbench with draws for storage of acoustic guitars on the go... a luthier workbench! Draws for tools axis, draws for guitar being built at another axis. Looks like this. Love the project!

[@BevelishCreations]

Thanks! This can totally fit the bill, with some changes to the dimensions. What would be cool is if the entire top is a slide out drawer, instead of a torsion box, to store guitars

[@idontthinkso666]

Very nice job, well done. I would REALLY like to see how you built the OTHER table, the one you used as a reference surface for this build. I say that because that is the project I was hoping this would be. It also looks likes a torsion box, but with dog holes for clamping, etc. It's that clamping ability that I wish to incorporate into my assembly table. Thank you for the video.

[@BevelishCreations]

Hey it’s just torsion top set on a base that’s based on Crafted Workshop’s plans

[@ManiSingh-kp6ik]

Super bro....

[@BevelishCreations]

Thanks

[@user-jv8gt8qv3e]

I am a carpenter in Korea. I have just started KZbin like you. I want to make your workbench design so fashionable. We support :)

[@BevelishCreations]

Thank you so much!

[@sumandl]

Good Job 👍 Subbed

[@BevelishCreations]

Thank you!

[@justinjones1850]

Love the idea. I could definitely use another with surface and think I'll try this a go. How many hours did you have invested in this?

[@BevelishCreations]

Thanks! I worked on this on and off for 2.5 months. I don’t think this would have taken that long if I had focused on it. I estimate maybe 20-25hrs of work

[@UNKN0WN_YT]

I gotta say...you’re a really good woodworker. And you make great videos. You see the value in good filming. I’m just surprised you don’t make more videos. But I find it funny that you have some really “good” stuff like woodpecker’s stuff , video equipment, etc., but use Ryobi. But...it works. Anyway, nice job!

[@BevelishCreations]

Thanks man. You mean make more videos for KZbin? I wish I could put more out but I have a day job that I work 60+hrs per week :/ I got the Ryobi stuff because they’re not tools I use heavily in my builds. Although, if you saw my Instagram story, I just upgraded my drill and driver to Milwaukee :)

[@bobt2522]

I also have a variety of Ryobi tools working beside my Festool and Woodpecker tools. As long as they are doing their jobs, I don't need to upgrade them.

[@BevelishCreations]

Bob T252 yep totally agree. I’m only upgrading because my Ryobi impact driver stopped working properly and saw some good deals on the Milwaukee stuff :D

[@DsHardWoodCreations]

Subbed

[@BevelishCreations]

Thanks!

[@DennisNestor]

Love that torsion top. I'm looking for some hardware like that for my shop cabinets did you find a good source for them?

[@BevelishCreations]

All the hardware I used are in the links in the descriptions

[@stallionranchwoodworks]

Very nice assembly table. The hardware is the best. What glue do you use to mix with your sawdust? Just yellow glue?

[@BevelishCreations]

Yep just yellow glue

[@An_Urban_monk]

I agree with the many other comments about the build, design, and editing a joy to watch and learn. just subbed. One question as I am binge watching assembly table videos for building my own. What was your rationale for the abbreviated size? Is it simply all you can squeeze into your current layout? Or have you some logic behind not using the typical 4x8 full sheet. This is America right? Bigger is always better; don’t agree necessarily so when is see smaller tables I’m interested to understand why.

[@BevelishCreations]

Thanks! I don’t really have the space for a full 4’x8’ table. And I actually built it for my CNC machine, but I didn’t want to “market” it that way since the build can work as an assembly table as well

[@alejandrocantu4652]

Nice bench, good job building. Why not try using. Rabbit or dado joints along with a Brad nailer which is much stronger then a Butt joint and pocket screws.👍

[@BevelishCreations]

Because there’s no need to overdesign something. Butt joints are strong enough for this application

[@EdMangualFJDiveCruiser]

Awesome work!!! What plywood did you use for this workbench?

[@BevelishCreations]

Thanks! It’s just birch plywood I got from one of the big box stores

[@matthewmills6452]

Nice shop and tools! Is this going to be an additional assembly table or is it replacing the one with all the dog holes in it? Also, if you only had the space for one assembly table, would you want it to have dog holes all over the surface? I have a workbench for hand tool work, but I am looking to build a mobile table that can be used as outfeed and assembly. I also have a cnc, so machining the grid of dog holes is no problem.

[@BevelishCreations]

I actually use this for my CNC. But I called it a workbench because even if people didn’t have a CNC they’d want to watch the video and build this for their shop to use as an assembly table or workbench. I actually prefer my workbench with all the dog holes. I use the dog holes all the time to hold my pieces down

[@matthewmills6452]

@@BevelishCreations Very cool. I was leaning that way as well. You showed some nice work holding techniques that wouldn't be possible without the dog holes.

[@reinerjakel8950]

Great design. I couldn't quite tell if the top allows for overhang needed for a Delta Contractor table saw. Reiner

[@BevelishCreations]

I’m not sure what you are asking? Why do you need overhang for a contractor saw?

[@reinerjakel8950]

@@BevelishCreations On a contractor saw the motor hangs off the back of the saw and will need to go under the top to slide the table against the saw top, I just had my new shop built and am in the process of setting it up. Thanks. Reiner

[@reinerjakel8950]

@@BevelishCreations I Love the design and that it is on wheels. Lots of storage and looks great. I purchased the plans but need to figure out how to make the top with overhang for the motor.

[@davidellis6588]

Great video. I am considering buying your plans. What are the rough dimensions and is there any reason one couldn't add dogs or track to the top? Does it interfere with the torsion box?

[@BevelishCreations]

It’s roughly 40”x52”. If you want to add bench dogs you’ll probably want less inner grids. And since all sides are closed off it’ll be a pain if you dropped something inside. You can add T tracks on top though

[@monkeyvideo1029]

Nice bench. I really like the finish. You mention shellac but I did not catch what mix you used, i.e. basic big box sanding sealer (Zinser 2# unwaxed shellac), waxed amber shellac or your own cut of shellac flakes. Could you share what you used?

[@BevelishCreations]

Waxed amber shellac

[@sffan15]

Alex, I noticed you don't screw your drawers together, only glue + brad nails. Will those stand the test of time? Thanks! Nice video.

[@BevelishCreations]

Yes definitely! Glue is enough for holding drawers together :)

[@arcusmc]

I'm about to make a similar project but will be inserting.my small rigid table saw in the right corner. Will the torsion box stay flat without that section if I take my time in cutting and securing the box?

[@BevelishCreations]

Yeah it won’t be a problem

[@rossutigard]

Nice table aside from the castors mounted on the side. Looks like a trip hazard and a toe jam nightmare!

[@BevelishCreations]

Thanks. The casters are removable. That’s why they’re awesome

[@ajaykapadia6262]

Did you use anything to finish the 3/4” plywood or did you use pre finished plywood?

[@BevelishCreations]

Yeah I used shellac

[@jasonmcalister8056]

I really love this build! But i do have one question.. Why a torsion top? Seems like alot of unnecessary work. I hope to maybe do this in the future once i get some space to work.

[@BevelishCreations]

Torsion box tops are very rigid and dead flat. So when you do assemblies things will line up the way they should. It’s one way to reduce the likelihood of wobble in furniture pieces after assembly. Of course if the ground where the furniture will be placed isn’t flat there will still be wobble, but you won’t add wobble on top of wobble :D

[@HBSuccess]

You need a dead flat reference surface. It makes life so much easier.

[@ajaykapadia6262]

I have the same SawStop and the table saw measures 34.5” from the ground. This workbench will measure 32”. Did you intentionally leave it short or is your table saw height flush with your workbench?

[@BevelishCreations]

My saw is 34” tall. But I made it shorter to clear some of my jigs.

[@SilveradoHD93]

Can you reference a video to make the flat surface with sawhorses and 2x4?

[@BevelishCreations]

I don’t remember…there are a few on KZbin. You can look up Wood Whisperer

[@dangraves25]

I've seen a few of these torsion top builds lately. What's the benefit of doing a bench top this way?

[@BevelishCreations]

Mainly flatness

[@j.darrelbarros209]

about 5:14 into the video you are ripping a piece of wood and you have a set of guides attached to your fence - who makes that jig?

[@BevelishCreations]

Jessem

[@bootyeater7625]

What are the dims of this? Want to buy but want to use it as an out feed table.

[@BevelishCreations]

50.25”x42”x32” (LxWxH)

[@GregoriMarco]

Professional job and video. Subscribe

[@BevelishCreations]

Thank you!

[@craftsmanjoneshome7954]

Epic work bench. We just finished installing windows and doors on the house, and can’t wait to start on the shop hopefully spring or summer of next year. I could probably use at least 2 of these in it. Check out our window install video over on the page if you get a chance!!

[@BevelishCreations]

Will do!

[@KevinFontenot23]

How many sheets of plywood did you use for this?

[@BevelishCreations]

Three 3/4”, half sheet of 1/2”

[@Mogalize]

How many sheets of plywood (and of what thickness) are needed for this project?

[@BevelishCreations]

One sheet of 3/4”, half sheet of 1/2”, one sheet of 1/4”, one sheet of 3/4” MDF, and quarter sheet of 1/2” MDF and quarter sheet of 1/4” MDF

[@Mogalize]

@@BevelishCreations Thanks. I bought your Drill press stand a couple days ago and didn't realize the materials that went into it. But its definitely very rigid!. I like this table, but need more of an outfeed table for the saw... Might just skip the top and convert it to outfeed instead. Thanks!

[@BevelishCreations]

Hey sorry I gave the wrong information to your question. I was also answering someone’s question about the media stand I just posted a video of. This assembly table actually uses 3 sheets of 3/4” ply, half sheet of 1/2” ply, one sheet of 1/4” ply, and half sheet of 1/2” MDF

[@rjtumble]

Hi, if you said it in the video, I didn't catch it. What's the top's dimensions?

[@BevelishCreations]

Hey I didn’t mention it in the video. The size is 42x50 ish

[@stuboo]

Beautiful work, Alex. What is the final size of the top? Did I miss that?

[@BevelishCreations]

Thanks! No I didn’t mention it because the size can be customized to whatever size fits the person making it. I didn’t think it’s an important detail. But mine is around 42”x50”

[@stuboo]

@@BevelishCreations Very helpful! Thank you!

[@bwillan]

One would almost think you're sponsored by Kreg. First video I've seen of yours. Only April Wilkerson would out do you in the use of pocket screw joinery in a given project. The finished project is almost too good looking to use even though it is shop furniture.

[@BevelishCreations]

Haha I’m not sponsored by them

[@GJCOrado]

Every time I watch a cabinet or draws being constructed and every time they bust out a dado or make multiple passes with a table saw. I am sitting here asking why not just use a router table? I thought I was the odd one and there was something wrong with process, no longer!

[@BevelishCreations]

Haha I feel the same way

[@miserikorde]

You make me nervous when you use your miter saw

[@BevelishCreations]

The miter saw that I don’t have?

[@miserikorde]

Bevelish Creations haha ope sorry I don’t know saws and names of them so well. Im just so super nervous at 0:32

[@miserikorde]

BUT BUT I’ve watched all your videos and you’re super meticulous and precise so I’m not so worried for you.

[@BevelishCreations]

miserikorde oh that...my hand was actually a good 6” away from the blade. It’s the low angle of the shot that makes it look like it’s much closer

[@BevelishCreations]

miserikorde thanks for checking out my stuff :)

[@markanthony9506]

PLEASE keep your fingers clear of the brad nailer. Too Close and careless. I would hate to see you get hurt. Awesome build though. Curious why you didn't continued to use pocket holes for drawers???

[@BevelishCreations]

I’m just used to making drawers this way and I didn’t have the shorter screws for 1/2” ply.