Track Sled Build Part Two

My first track build and we finally got her going.
music by bensound.com
LINKS:
amzn.to/3ah9C4q (throttle plate)
amzn.to/3gaGWOm (thumb throttle)
amzn.to/2QwrktP (82 in. throttle cable)
amzn.to/3gfs1lX (kill switch)
amzn.to/2OUIHUF (replacement belts)
amzn.to/3e9PTES (engine mounting plate)
amzn.to/3do7Ct5 (high torque sprocket)
amzn.to/32ktkb7 (torque converter clutch)
amzn.to/3ajs8JA (#40 chain)
www.etsy.com/shop/ProspectorO...

[@prospectoroutdoors]

www.etsy.com/shop/ProspectorOutdoors

[@larryhudlemeyer2617]

"Learn something through the 'School of Hard Knocks" and you'll never forget it!" Preach on, brother, preach on!

[@prospectoroutdoors]

Thanks buddy! Definitely a true way to learn. Although I must confess that I do forget still and get myself into the same bind over and over again.

[@larryhudlemeyer2617]

Years ago, youngest son was going to school at UW, in Laramie. Naturally, he considered the whole region of the Snowies and the upper front-range of Colorado as his personal play-ground! And, just as naturally, he felt it his duty to share outdoor adventures with anyone he could talk into going along with him, including his ole Dad. You should know, I was in my mid-fifties at this point in life....old enough to know better but young enough to still go on some adventures! Don't get me wrong, I wasn't trying to re-capture my youth, just keeping on keeping on! We climbed 14-teeners, gold panned in the Snowies, rode Honda XR-650-R's and Yamaha XT-500 on adventure trail rides in both locations during the Fall and Winter! Yeah, I know, I thought we were about half a bubble off center to be doing it then, but we did. One late October, wife and I drove down from the Black Hills and met son and family at Mountain Meadows Cabins off of Hwy-130 on the way up to Medicine Bow Peak. It was drizzling when we started out on bikes the next morning, but we were adventure riders well-dressed for the ride, yeah buddy! So, we sucked it up and carried on. By the time we got above tree line at Libby Flats, the drizzle became a full-blown Wyoming mountain snow storm! We managed to ride an old forest road back towards Centennial and eventually come out on Hwy-130, just below our cabins. Would have been a hoot to have had a beast like yours for further adventures in the Snowies! Thing of it was....son was a UW engineering student and we could have probably built a couple of our own! Oh well.....those were shining times, indeed! Thanks for sharing your story. Hope the project came out okay for you!

[@prospectoroutdoors]

Great stuff. I would love to have lunch with you and hear more about it for sure! Where are you living right now? I sure appreciate you following along on this adventure. I need to get back on this project and get it dialed in for fishing . Take care buddy!

[@ryanthon10]

Can't wait to see it in action on the ice. That machine definitely belongs on an episode of the Red Green show.

[@prospectoroutdoors]

Hopefully it will be on the ice this next week. “ If that’s my wife, tell her I’ll be home after the meeting.” “ keep your stick on the ice.” “ remember, if the women don’t find you handsome, they should at least find you handy.”

[@FryFlier]

Great Joe, thanks for the update. Watched you in the pull cart put me in mind of the large Tonka Toys.

[@prospectoroutdoors]

Interesting thought. Might be a good design idea for the body. Thanks 😊

[@LincolnSP150]

Very nice Build, ....

[@prospectoroutdoors]

Thanks buddy!

[@ajbahe]

YOU SOB!!! Now I have another project!!!! This is awesome, Thanks for sharing!!!

[@prospectoroutdoors]

Right on! Get on it.

[@hardh2ofishin857]

Looking good Joe. Will be fun to see it in action!

[@prospectoroutdoors]

Thanks buddy. Trying to figure out how to get it to steer better. Would you mind sending me a picture of your hitch assembly and the sled that goes behind your machine please? Gracias!

[@damonromero5396]

Just purchased everything from your parts links. Thank you for posting that, it was extremely helpful! I just picked up 2 sleds that were out to pasture and already have one dissected and hopefully pulling out jack shaft for machining key way today. The tracks on both the Artic Cat and the Polaris I bought for very cheap are in great condition! So a second build is very likely to be in my future. Thanks for inspiring me ! Hello from SE Michigan ! Lakes are just starting to lock in !!

[@prospectoroutdoors]

Such great news to hear! I hope you have a great time building the track sleds. I need to get started on my second build as well. I still need to follow up with a third video from the first build. Please let me know how things go and I can’t wait to see the final product! Hello back at you from Wyoming! Hope to get out to Michigan someday to wet a line.

[@tskedition]

Very cool project, looking forward to seeing how it performs in snow. I hope you make many more videos about it

[@prospectoroutdoors]

Thanks buddy! I am definitely planning on a couple of more videos on the beast.

[@IcecyOutdoors]

Awesome, would definitely want to see it on ice, waiting impatiently....subbed..

[@prospectoroutdoors]

Thanks buddy! Even my wife told me to get out there and make a number three the other day. 😂 i’m just waiting for the time to be right when my ambition meets the opportunity. Thanks for coming along on the video. I’m starting to get things dialed in as far as my hitch goes. Had to move the handlebars back about a foot. Should be dialed in soon.

[@RobMillerATV]

Great build! Looks like a fun project.

[@prospectoroutdoors]

Thanks buddy! I definitely need to get back at it. Winter is coming.

[@RobMillerATV]

@@prospectoroutdoors definitely. I searched your channel for the finished product and realized u built it b4 the snow. Iv been kicking the idea around for a couple years to build one.

[@prospectoroutdoors]

It was a fun project. Now I am thinking about making an army tank version with two tracks. Picked up another sled a few months ago. Might just run two separate machines in tandem for simplicity sake.

[@brandonhunter2504]

This is fantastic! I would love to build one. I have enjoyed your progress. When I pull the trigger the parts list is super helpful. This has been an awesome series to follow on your channel.

[@prospectoroutdoors]

You are too kind. Keep your eyes peeled for some sleds on KSL. I might start building these. I have enjoyed every bit of it! I hope my video has taken away some of the mystery of the build. They seem to be pretty simple. I can’t believe you are still icefishing down there! Get ready to jump on board with me on a trip to Lake Powell. We need to go catch some stripers.

[@gustawuciekinier4094]

Predator engine chassis from Suzuki Plus my job will cost me $ 650 I think it's worth Basia young I'm a retired mechanic and this year I'll go fishing to Green Bay Wisconsin see you later

[@prospectoroutdoors]

Enjoy your build! Tight lines.

[@ChrisCraftWow]

This is awesome! I'm doing it!

[@prospectoroutdoors]

Best of luck to you on your build! Check out Track sled builds of the north on Facebook.

[@allergictoasphalt11]

Nice machine. I built one myself this past winter and made videos on it.

[@prospectoroutdoors]

Thanks 😊 I will definitely check out your videos. Edit, I am already subscribed to your channel. 😂 The John Deer build is great 👍🏻

[@cliftonsnider1520]

Huh, whodathunkit apparently you are just the teacher I didn’t know I was looking for. Now I’ll drag out the sled I picked up last year and git at it. Thank you.

[@prospectoroutdoors]

Sweet! Do me a favor and keep me posted on how your project goes. Don’t forget to get on Facebook and follow the guys on track sleds of the north. Tons of good information. Best of luck!

[@moedog5087]

I'm in the same position. Lots of the other builders don't show their work and just say what they did. Good videos here! I'm picking up a sled this weekend

[@prospectoroutdoors]

Thanks 😊 I am sure that you realize that I am definitely a novice on the subject. Don’t follow too close. 😂 Best of luck with your build!

[@moedog5087]

@@prospectoroutdoors hey, any mistakes you make, we don't have to 🤪

[@prospectoroutdoors]

😂

[@mattgaias7869]

That is awesome

[@prospectoroutdoors]

Thanks buddy. Work in progress for sure.

[@gustawuciekinier4094]

I watched your video it was very interesting and I decided to make the same as yours with a slight upgrade because it couldn't be longer than five feet because it wouldn't fit in my $500 Honda CRV I had a lot of fun ice fishing,I used a chain tensioner

[@prospectoroutdoors]

Great idea on the tensioner. I would love to see the finished product!

[@gustawuciekinier4094]

@@prospectoroutdoors

[@brandonthompson5795]

Awesome man! Get any more montages of it in action and the throttle setup complete?

[@prospectoroutdoors]

Thanks buddy. Still working on the hitch. I hope to have it out on the lake soon. Thanks for letting me share!

[@gustawuciekinier4094]

How many teeth does a gear wheel apply to and where can I buy it ,I bought a Trak from Suzuki and I'm starting to assemble, I know what motor with the gear and now only this gear for the drive

[@prospectoroutdoors]

If I understand your question right, the sprocket that I used had 30 teeth on it. If you look in my video description you will see links to different parts. Not sure if they’re all still available right now, but you should be able to find similar items on Amazon. Good luck with your build! Sounds like you’re going to do it right.

[@TrentWilliamsOutdoors1]

“I’m just going to assume this isn’t OSHA approved” 😂😂😂

[@prospectoroutdoors]

What do you mean, I only lost a few fingers!

[@mohawkgarage3990]

Maybe a full grown man but definitely a child at heart! Absolutely awesome! How much you want for it? Lol

[@prospectoroutdoors]

Thanks buddy! Just this morning, I figured out the throttle cable. There are a few different ideas I have floating around that might be interesting for the next video. I’m planning on one more video once I get everything how I want it. Should be trying it out Monday at the lake. Make me an offer! 😂 Thanks again!

[@mohawkgarage3990]

@@prospectoroutdoors can't wait for the next video, keep it up! Definitely will be thinking about a good offer for it!

[@JamesTorrey]

Very fun. No part three yet?

[@prospectoroutdoors]

Thanks! I am a little slow this year with fishing, but hoping to get after it soon… Take care!

[@gustawuciekinier4094]

How much horsepower does the engine have?

[@prospectoroutdoors]

6.5

[@arronjohnston742]

earned a new sub by admitting your mistake 👍

[@prospectoroutdoors]

Much appreciated! Sometimes the school of hard knocks is the best one for me to attend. Once I learn things that way, it’s hard to forget. 😂

[@MisoJuice]

What type of saw did you use at the beginning to cut up the metal to make your base frame?

[@prospectoroutdoors]

www.cpomilwaukee.com/milwaukee-2782-20-m18-fuel-metal-cutting-circular-saw--tool-only-/miln278220.html?ref=pla-mobile&zmam=31282435&zmas=47&zmac=722&zmap=miln278220&gclid=EAIaIQobChMIpbKjo_OK8AIVlB-tBh3EiACkEAQYAyABEgJpSPD_BwE

[@dannycoil6417]

Are you going to make a part 3 update video??!?!?!!! Great build!!

[@prospectoroutdoors]

Should be coming soon! I just had a buddy give me a sled to stand in. I will be picking it up this next week and should have an on ice first try with the machine. I’m sure I will have some things that need to be tweaked, but I am excited to try it out. Thanks a ton for watching and participating. Sure appreciate it.

[@MisoJuice]

I want to see part 3 too because you mentioned something about an engine bracket when you were hooking up your throttle cable

[@korndogg714]

Where did u get the drive shaft? Did it come with the sled?

[@prospectoroutdoors]

Yes. I just didn’t tear that part down. It was all ready there. I actually tore out more than I should have an ended up putting it back together again later.

[@ericcamp7422]

Awesome build. Im working on building one of these. What kind of speed do you get with that 30 tooth sprocket? Do you feel you have enough torque?

[@prospectoroutdoors]

To be totally honest, I haven’t really headed out for a test run yet. When I bought the sprocket, I was more interested in torque than speed. Hopefully I will get a video together soon of the contraption at work. Thanks for coming along and best of luck on your build!

[@ericcamp7422]

@@prospectoroutdoors Thanks man ill look forward to future videos from you. I watch them all. Just trying to figure gearing out, im a bigger guy and want torque to get me, a buddy and our gear out.

[@prospectoroutdoors]

You might try to message Amos Wheeler on Track sled builds of the north on Facebook. He was extremely helpful to me. Good luck!

[@brentneves3602]

It's definitely coming together nicely, the only concern that I have so far is one: "the length of the track, being fairly long, and possibly difficult to turn' in heavy snow And two: 'The thickness of the drive belt, for the reciprocating clutches being thin' and overheating under high load' Otherwise great job, and looking forward to the completed product.

[@prospectoroutdoors]

I appreciate the encouragement. I have pulled the handlebars back a bit to help with turning. I am also concerned about the drive belt. I actually got three extras just in case. I am definitely curious to see how it preforms under a heavy load. Thanks again and take care.

[@brentneves3602]

@@prospectoroutdoors right on, great job and good luck.

[@WoodysPerformance101]

@@brentneves3602 Just figured I would chip in. Yes they are harder to turn in the thicker stuff with these long tracks but definitely helps too have longer bars. And as far as the belt I wouldn't be too concerned if you keep a little momentum you should be perfectly fine.

[@OutdoorsmenLee]

@@WoodysPerformance101 How many belts do you typically go through in a season?

[@WoodysPerformance101]

@@OutdoorsmenLee I didn’t use it a lot last year and probably won’t use it a whole lot this year but so far haven’t went through the first belt

[@gustawuciekinier4094]

which converter did you use for this product ,because there is so much that I do not know which would be the best and mount it

[@prospectoroutdoors]

I used a series 30 clutch. There should be a link in the description that should get you close to what you need. Best of luck to you!

[@juliandenoto2632]

What size is the bigger sprocket used? Currently building this with the same setup

[@prospectoroutdoors]

I believe it was a 30 tooth sprocket around 5 inches in diameter. There is a link in the description of the number two build video. Looks like it is unavailable, but I’m sure you could find something very similar.

[@damonromero5396]

Quick question, I appreciate your time, I bought the 30 tooth sprocket to go on my jack shaft, but I remember you said you wanted a bigger / More teeth sprocket and settled for this one. a 30 tooth. wondering how exactly that turned out for torque and speed? would a bigger sprocket give you more speed or slow you down for more torque? I know there is a fine line, But I would sacrifice speed for down low torque. thats my opinion,...

[@prospectoroutdoors]

I would stick with the 30. It seems to have plenty of torque for pulling. Not the fastest machine, but I’m with you on that. Just get my stuff on the lake is all I care about. If you want a professional opinion, look up Amos Wheeler on Facebook. He is the Man when it comes to these machines. He was more than willing to help me out. Best of luck to you and I wish you all the best on your new build.

[@stefantwotimes]

Is it possible with a sling clutch instead of a variator ?

[@prospectoroutdoors]

That question is above my pay grade. I will refer you to tracksled builds of the north on Facebook. Those guys know everything. Good luck!

[@brettjamesmiller]

Hey bub what size gear are you running on your Jack shaft off your torque converter

[@prospectoroutdoors]

30 tooth on the Jack and a 10 on the clutch. 1” shaft.

[@prospectoroutdoors]

You should be good. Give Amos wheeler a shout on Facebook messenger. Track sled builds of the north is his page. He has a great wealth of information. Unfortunately, I am a rookie.

[@zmax429]

I've been following your build...how did it work out?

[@prospectoroutdoors]

Thanks a lot! I still need to get back to number three. I’ve been fishing too much. I still need to figure out exactly where to put the handlebars and the hitch. Pretty sure I have it figured out and will document it when I get around to it. Sure appreciate the support! Take care.

[@perrytracy1840]

A issue I'm having is my front sprocket is hitting the track so i went to a smaller one and its still to close. I don't want to go any smaller because of losing speed. Any other suggestions? I've used your videos for my build, they have been super helpful. Thanks

[@prospectoroutdoors]

The only thing that comes to mind is maybe making a slave shaft right next to your main one. You would need some pillow block bearing‘s and some 1 inch round stock. You might check with Amos Wheeler on Facebook. (Track sled builds of the north) He is the expert for sure. Unfortunately, I am just a rookie that recorded my build. Best of luck to you! Let me know if I can help in any other way.

[@perrytracy1840]

I'm also a rookie. Your video was super helpful. Especially what parts to buy. Thanks for your time.

[@prospectoroutdoors]

Thanks buddy. I sure appreciate that. I am curious how you solve the issue! Please keep me posted.

[@mattbrown7483]

How did that throttle plate work out for you? reviews aren't too positive (then again, some of people making them don't seem to have an ounce of mechanical ability), but you are using it for the same application I would.

[@prospectoroutdoors]

Are you talking about the throttle plate that I was going to order? I never did order it because the throttle assembly worked fine once I put a bracket on to bolt the cable to. Works like a champ. I need to get some snow here so that we can do part three ASAP. Thanks for your support!

[@mattbrown7483]

@@prospectoroutdoors yes the red throttle plate you had linked. but if you didn't use it i guess you wouldn't know how it worked, lol. but thanks. I was wondering because I have seen some others state that their throttle was getting stuck wide open on the predator motor. they fixed it by added an extra spring.

[@prospectoroutdoors]

Interesting. Thanks for the heads up. I guess I better probably look at my links and delete that one. Like I say, things worked out great once I gave the cable something to push off of. Good luck on your build and don’t hesitate to ask me if you need anything else. I am no expert, but you will get what you pay for as far as advice goes from me. LOL

[@user-prochindei]

Can you tell me where you are from and why you are doing this?

[@prospectoroutdoors]

I am from Wyoming in the United States. I will be using it to pull my Ice Fishing sled. Thanks for watching!

[@jasonmolepske3977]

Does the comet comet clutch come with a sprocket on it?

[@prospectoroutdoors]

To my knowledge, they do. I don’t remember having to buy one for that particular part of the project.

[@prospectoroutdoors]

I just looked at the link in the video. Looks like it comes with a 10 tooth and a 12 tooth sprocket. Just put on which ever one you choose.

[@jasonmolepske3977]

Thank you

[@brandondonnelly7660]

How does it run? Did you get out??

[@prospectoroutdoors]

Running good. I need to get my sled hitch built still to get things dialed in.

[@balta123]

Can thing tow 200kg on top of it?

[@prospectoroutdoors]

I highly doubt it. It will definitely pull that though.

[@lawnboyfromhell]

Nothing more dangerous then a man with a welder and a credit card!😂😂 Got my brain spinning and my credit card trembling and I already have the welder!

[@prospectoroutdoors]

Awesome stuff! Gitter done. Do you have a donor sled yet?

[@lawnboyfromhell]

@@prospectoroutdoors Actually I have a couple old Jags in the back 40!

[@prospectoroutdoors]

Nice job. Way to be prepared. My wife still hasn’t seen my next one. 😂

[@dansw0rkshop]

Did you ever get to part three?

[@prospectoroutdoors]

Still working on it. Even my wife told me to get out there the other day,. 😂 I am a pretty lazy guy…

[@dansw0rkshop]

@@prospectoroutdoors Right on. I've got some projects like that too. Great job so far!

[@prospectoroutdoors]

Thanks 😊

[@FishfearmeStudios]

A welder sidekick is handy. Who is this OSHA guy? That thing is going to take off and leave you behind. Poor cat cat is wondering what in the world you are riding.

[@prospectoroutdoors]

It is a good thing cats don’t talk! 😉

[@prospectoroutdoors]

As far as OSHA goes, I have had several employers over the years tell us to go home if they ever showed up and that the company would pay us the rest of the day to get out of Dodge.😝

[@FishfearmeStudios]

@@prospectoroutdoors LOL. Nice

[@MisoJuice]

Where’s part 3

[@prospectoroutdoors]

Work in progress. I’ve got too many irons in the fire right now. Hopefully soon. Thanks for watching!

[@MisoJuice]

@@prospectoroutdoors ok thanks. I am working on mine right now and wanted to see how you did it so I can see how easy it was to do

[@prospectoroutdoors]

Good deal. The only thing I am really tweaking right now is the hitch assembly. I had to pull my bars back a little bit and probably will shorten up my hitch a little. Just so I can turn easier. It has been about 30 below zero this week, so my motivation is just not there right now. Good luck!

[@tylerseabook9423]

Awesome. Like an old diablo rouge. But ur motors too high. Needs to be low to the skid

[@prospectoroutdoors]

How would you suggest lowering the motor? Serious question. I am just a rookie learning and would appreciate the help. Makes sense that you want it lower for sure. Thanks!

[@tylerseabook9423]

@@prospectoroutdoors my bad. Your setup is perfect I mixed up at the beginning of the vid. The way you did it is perfect

[@prospectoroutdoors]

Sweet. Thanks for letting me know. Hopefully I can get this thing up and going this year and on the ice. Take care!