Yamaha Raptor 700 Tusk Extended Axle - Installation and Test Ride

Unboxing, installing, and test ride of the new wider axle for the Raptor 700. Tusk Off-Road Extended Racing Axle was purchased through Rocky Mountain ATV MC www.rockymount...
DRW Performance Sprocket Guard
drwperformance...
Alba Full exhaust system and tune for Raptor 700 teamalbaracing...
If you are new to TrailBlogger please subscribe here bit.ly/2yGh7yS
More Raptor ATV Trail Riding Videos bit.ly/2DfB4kn
Banshee ATV Trail Riding Videos bit.ly/2Q5zjbZ
YXZ1000R UTV Trail Riding Videos bit.ly/2PtH9PH
TrailBlogger Season 7 bit.ly/2Q8As2K
TrailBlogger Season 6 bit.ly/2Q8As2K
TrailBlogger Season 5 bit.ly/2Q6jK3P
TrailBlogger Season 4 bit.ly/2RsxVAH
TrailBlogger Season 3 bit.ly/2yI9mIN
TrailBlogger Season 2 bit.ly/2EQqIZJ
TrailBlogger Season 1 bit.ly/2SzRc4e
#yamaha
#atv
#quad

[@OffroadOutlaws]

Their good axles. I've been running mine for over a year now with no problems. Even when I land jumps kinda sketchy, it holds up.

[@raptordan6851]

New axle and sprockets guard are pretty sweet , that things turning into an animal !

[@trailblogger]

I'm loving it more and more! Thanks!

[@SebastianGarcia-jo3zb]

Lmao that’s my brothers bike! As you can see by my profile picture it’s the same kfx seen in the vid

[@juancarlossotoperez3355]

Every day your Raptor looks better

[@trailblogger]

thank you! she is getting there!

[@everythingloud4068]

Great video👍 I definitely wish they would make a 48 to 50 inch raptor that would be so much more stable

[@JTRAMMZ]

I’m glad you cut the comments back on I just finished installing mine like an hour ago had to watch your video to learn how to do it

[@trailblogger]

I accidentally set everything to kids only and it turned off all the comments. Was not on purpose. Thanks for watching!

[@JTRAMMZ]

@@trailblogger this video save me $160 I was planning on taking it to the shop but it took 5 days to come in so I just watched this video a lot and eventually learned how to do it thanks man

[@trailblogger]

You're welcome! Comments like these are why I post this stuff. Glad it helped! See you on the trails!

[@FREEDOMSYNDICATEOFFICIAL]

Great job TrailBlogger! Good choice of music too for the video!

[@trailblogger]

Thank you!

[@TerrellSpivey]

WowWe! She's looking super wide now! Haha! I can imagine handling is much better now! Congratulations to the winner! He's got a nice looking bike too!

[@garrettnoble2615]

That raptor is killer looking! I like the black and the green.

[@trailblogger]

Thank you!

[@yoscrub2607]

That exhaust tho 🔥🔥🤯

[@carbonelement77]

Looks so stable 👍🏻

[@trailblogger]

It definitely is! About a football field wide now but she rides great!

[@carbonelement77]

Enjoy it :) I’m still waiting on houser to send me the +2 a arms I ordered combining them with the rpm extended rear axle been 2 weeks now

[@barkus921]

I’m not much of a raptor guy, but that’s legit.

[@powersporttoyz8590]

Sick upgrade! Honestly gives the quad much better performance!

[@Anthony-sy9dt]

Really appreciate the very clear and well recorded video. You saved my ass today!

[@cmmoto]

Beast ..much better then stock ..almost at 50k

[@trailblogger]

I've been stuck here for awhile lol. Can never quite make it over the 50k hump but hey who's counting? LOL 😆

[@cmmoto]

TrailBlogger hahahah..hope u make it bud ..great content..be safe from this Coronavirus

[@banshee100]

Raptor is sharp man

[@trailblogger]

aye thanks man, she is no hellcat Banshee though lol

[@ononewheel7]

Ya know back in the day those used to be gforce axles i used to run them all the time on the kfx and they were great for the money! Now tusk bought them out! Great video man hope your doing ok w all this craziness going on!

[@trailblogger]

I had one on my old yfz and it did good other than the lock screw loosening up now and then.

[@trailblogger]

Hope you are staying safe over there also! I saw you have a new build video up, planning to watch it soon just been crazy busy

[@ononewheel7]

TrailBlogger yup i remember the same think w the kfx’s haha thats funny! I think back then those axles were like 199.99 it was quite the deal! Ya part one is up let me know what ya think! We are surviving man one day at a time rite now!

[@mikast-amand8486]

Nice video man i love how you film every detail!! Well done

[@trailblogger]

Thanks a ton!

[@carlosflores6142]

these vids help alot appreciate it I you noticed you put the wheels on the wrong side

[@trailblogger]

thanks i reversed them on purpose because the other sides of the nobs are getting worn from riding the rocks already. getting my money worth outta them lol

[@carlosflores6142]

@@trailblogger oh ok awesome i hope to get a raptor this year and make it as wide as yours if you don’t mind what fox shocks did you put on there and what are they specifically for because I know they have a bunch of different ones thank you!

[@trailblogger]

they are made specifically for the raptor 700. if you use standard travel arms you can keep shock length stock.

[@carlosflores6142]

@@trailblogger ok well you so much

[@ernesto_yz125x]

I got the same one feels so much better when riding

[@trailblogger]

Thas what's up 👍

[@ernesto5035]

TrailBlogger yeah brother nice machine u have i got a 18 raptor 700r nd i love it I am new in your channel nd i really like your videos 🔥🔥

[@johnsayman2271]

Got my warrior running great thanks to your videos and your reply to my question about the popping noise from intake, raised my needle up one more spot so on the second from bottom groove. Thank you! Can't wait to hit the trails! What chain and sprocket set would you recommend for mostly trail riding? I have rear skid plate so no chance of hitting rear sprocket on rocks or stumps.

[@PatrickRiggs33]

Killer vid as always! I see the beginnings of a pretty cool home track there.

[@trailblogger]

I've got about an acre back there to mess with but most of it is covered in blackberries and brush, need to get it cleared off then it's on!

[@canamdennis6829]

That is the sweetest Raptor ever nice job bro

[@keithmurray8249]

Hi Mate just wondering where you got your decal kit from? love you ATV Bro its mint!!!!!

[@RICHARDVINCSNIPERV]

That sound though!!!🔥🔥

[@trailblogger]

She's a lot more throaty with that Alba pipe and tune!

[@RICHARDVINCSNIPERV]

@@trailblogger That was a pure blast to watch brother

[@trailblogger]

Thanks glad you enjoyed the vid! Got more coming up soooon

[@BayCityBanshee]

Looks good now. Like seeing wide raptors

[@doogiessomethingaboutnothi3518]

Like the paint scheme

[@DavidLouisVIP]

Thank you very much for this detailed video, that thing is radddddddd💪👍

[@trailblogger]

You're welcome! Thank you for watching man!

[@stevenpeterson1114]

Thanks I learned allot.

[@trailblogger]

Welcome!

[@NothingTooCrazy]

Thanks for the S/O! Great video 👍🏽

[@trailblogger]

No problem and thank you!!

[@SebastianGarcia-jo3zb]

Cisco G what’s up brother

[@michaelgatestheunfinished3777]

Are you planning to get a DRW Rotor Guard or something different Great video...great machine

[@cdanielcabreram5001]

Too beauty!! A great machine, just a question? Its hard drive that ATV, when you're new on the quads guys? Because i wanna buy one like your machine!

[@JarofMayonaise]

Being an absolute newb to quads...I don't think I would recommend a 700 as a starter. Hell any size can kill ya but a 700 can get you in trouble faster than say a 250. You crash on a 250, you likely weren't going THAT fast so you may be less injured. The 700 is fast, meaning you'll probably going twice as fast when you get thrown off it. I hadn't really crashed a quad in 2 years since I started (rode dirtbikes since a kid though) unless you count that one time my 250 leaned over too far and I just put my foot down to push it back over... No, my first crash broke my left arm pretty badly (from what I'm told). Although you do not see it happen, you can see how fast I was going when it happened if you browse my videos. There is also a fresh rollover that happened this weekend too. Not trying to snag viewers, my channel sucks, but you can at least see what happens if you crash on one of these.

[@Kevin_Yagoonie]

What's the widest that axle can go?

[@jjay718]

Nice raptor. I use to have a 15 and looking to get another aport quad but cant decide raptor or yfz this time. Raptor was too tippy for me but how is it widened? I just ride trails but they are pretty wide.

[@RaptorWRLD]

Awesome video! I was close I said dominator axle lol

[@trailblogger]

I've heard those are good too

[@BayCityBanshee]

Best axle out

[@SuperBikeChannel]

Clean asf bro i like those empire me personally only rep monster but thats my 2nd exhaust. Good addon you did

[@trailblogger]

thanks man. its actually an Alba full exhaust and tune

[@SuperBikeChannel]

@@trailblogger alba is good asf had it on my yxz1000 they make quaility stuff

[@trailblogger]

same, alba header and tune on our yxz

[@AtvAdventureVlog]

Exhaust !!!! Great job

[@dlachioma]

That's the hottest looking Raptor I've seen! I don't even like yellow but man this looks good! Wrapped?

[@trailblogger]

Thank you! yes I wrapped it, it is the base model all gray underneath

[@dlachioma]

@@trailblogger so nice! Hey, I cannot get my C-clip on my new Tusk axle. It's driving me crazy. What's the trick besides the PVC pipe?

[@trailblogger]

@@dlachioma a few choices curse words and swing harder! LOL did they maybe send the wrong clip?? Little lube might help

[@dlachioma]

@@trailblogger it looks correct but man it's a pain. Going to try again today with a bigger hammer.

[@trailblogger]

@@dlachioma hope you get it on there! It has been awhile but if I remember right it was a very tight fit and I think I hesitated at first thinking that's not gonna fit too

[@erickvidana9245]

Great video!

[@trailblogger]

thank you!

[@jacobhenson3952]

Video is awesome I’m about to start making my 2019 Raptor wider. I think I’m going with alba just like you did and just putting spacers on the back till I can come up with more money for the axle. Are u still liking there a-arms ? How do u feel about the drw stuff ? I been looking at there sprocket and brake protector but I’m not sure how good it would protect here in Tennessee there a lot of rock riding. Do you think it would work as good as a regular skid plate does ?

[@trailblogger]

He offers a skid plates to go with those. I just haven't added it yet. I love my albas. Have them on my 08 raptor for 5 years now no problems even when my wife decided to send it and cartwheeled Bruiser down the side of the mountain.

[@joshuacastillo5952]

How did you tighten the 3 piece lock nut? Couldn’t see very clearly

[@danieldawe216]

Hey dude what a arms you got?I like how you got it looking low profile, noticed the fox shocks on it which are looking awesome. 😎

[@trailblogger]

Some of those shots I had the air out of the shocks. It normally stands up a bit higher

[@trailblogger]

Oh and those are the Alba standard travels

[@danieldawe216]

Nice one dude thank you. Is there any after market shocks that will lower the raptor height, I'm from uk and use mine on the roads , looked at the lowering kits which just bolt on to the bottom of a arms but seen mixed reviews. Just wondered if there was any decent shocks out there new that would work.

[@Chris-uh6vd]

Hey man. What size rear tires do you think you will go with. 20x10-9 or 20x11-9? I'm struggling with this right now. I went 20x11 and noticed a slight decrease in acceleration with the wider tires so I changed my rear sprocket to a 40 tooth to get the extra torque. 1st gear is pretty useless tho

[@Chris-uh6vd]

Then now I just bought ITP holeshots 20x10 and can't decide if I made the right buy switching back to the 10. Not sure if I'm gonna like it when I widen the bike identical to yours on Thursday

[@KingBiggie]

Hey I have a question does the 1987 warrior 350 have a rev limiter? If not my warrior keeps bogging out at top speed I don’t think it’s my jets because I’ve jetted it a million and one times I can only top out at 65 and I have a lot of mods to make it go faster. Do you know what it could be?

[@trailblogger]

I'm not sure! 65 is not bad for a warrior. What jets are you using? Stock carb? Does it backfire or die a lot? The only rev limiter I know of is the one on the clutch perch for the parking brake. It retards the engine if it senses the parking brake is engaged I believe. I eliminated mine by chopping the wires to it and twisting them together to bypass the failing switch

[@KingBiggie]

I have stock carb, 155 main and 47.5 pilot. K&n air filter, slightly modded air box, full fmf, stage two cam, 15-38 sprockets.

[@KingBiggie]

It backfires when you top it out. And it is very jerky and bogs at low rpms

[@KingBiggie]

And a 10.25 wiseco high compression piston

[@kalonbergeron]

what grease did you use on the master chain link?

[@trailblogger]

Just some random red chassis type grease in a tube I use for ball joints and bushings etc. think it came from autozone.

[@eddydgomez1719]

I loved the video, but I have a question why did you put those O-rings where you put the C-clips. Don't the O-rings go on the inner side the same way you removed them? or was that just your personal preference?

[@trailblogger]

Did I do it wrong? I though i put them back the same way they came out.

[@eddydgomez1719]

TrailBlogger Lol idk if you did it wrong that’s why I asked. I assumed maybe it was your technique. When you were removing the axle the O-rings were on the inner side close to the carrier bearing seal & the C-clip was on the outer side. But when you put it back on I saw you put the them together on the same end. I looked at a video from RaptorGang and he specifies that you put them on the same way you took them out on this video.

[@trailblogger]

I was looking at the parts diagram it showed that the o ring goes on the inside for the brake rotor side but the outside for the sprocket hub side. I could be wrong...

[@eddydgomez1719]

TrailBlogger yea I’m a little confused because I’m looking to do this same upgrade as you did I’m actually buying it right now but I guess I’m gonna go ahead and do it like you did it seems like it works and you were ripping It after so I’ll put it on like that. It looks great by the way the stance is much better.

[@trailblogger]

@@eddydgomez1719 did you see the diagram?

[@andresarevalopavon1124]

😍😍

[@piotrkopecr7007]

Extra 👌

[@Mystorytilnow]

What was the torque spec on the nut with the coder pin at the end of the install? Couldn’t really read your torque wrench..145lbs?

[@trailblogger]

If I recall correctly it was 155 or something higher than my wrench goes up to so I just sent it lol

[@marcelomendez3783]

How do I get those graphics?

[@brycedavis8388]

Marcelo Méndez I was wonderin the same thing

[@JarofMayonaise]

Unsure whether or not it makes a difference, but your put the tires on the wrong sides. ---> rotation was backwards.

[@trailblogger]

It was intentional because they are worn out the other direction already lol. Got to get my money's worth before I trade them in for some new skins

[@JarofMayonaise]

@@trailblogger Can you tell a difference when riding when the rotation is backwards? BTW, which tires you looking at getting? The CST Ambush's I have now I think are the reason I first crashed and broke my arm. I was thinking about going back to stock tires since a lot of people still have them on.

[@romanbernal9157]

@@JarofMayonaise maxxis rzr 2

[@oscarolmos8406]

Where can you find the thing that go on the axle to make it wider

[@trailblogger]

Came with the tusk axle. Wider axle is better than spacers

[@MixinGasGarage]

baller

[@eddydgomez1719]

It was hard to tell because of the angle of the video but did you put the Washer that goes between the wheel hubs and the castle nut. I can’t tell if you did but if you didn’t is it not necessary for this Tusk axle set up. I’m asking because I’m gonna purchase this axle bar.

[@aliammoun2012]

I saw that you changed from shocks only , do you think no big need to change the rear one ?

[@trailblogger]

The rear works fine as it is a reservoir shock from the factory. I didn't change the shock length up front, just added air shocks the stock length with +2 arms

[@aliammoun2012]

@@trailblogger thanks

[@trailblogger]

@@aliammoun2012 Welcome, I think there is an extra adjustment on the R model rear shock though so if you can get one of those they are a little better because of the extra setting

[@yoscrub2607]

Love it

[@williehamiltonjr4657]

Hey man i just got a 2019 700rse and im looking at the alba and hmf exhaust/tune setup. Do you have any reccommendations? The alba seems to be priced better but im a little nervous about having a permanent tune on my ecu. Any advice is appreciated, thanks

[@emmanueljose9682]

Hey trailblogger i saw the beadlock wheels you got for your banshee they look amazing, wanting to get some blue ones for mine how much do they cost

[@trailblogger]

Checkout the Alba website I'm not sure on the current price. They have held up great though. I do recommend them.

[@tiguy225]

i have one on my raptor, and its giving hard time to the bearings, i dont race, and carrier is brand new but my last bearing set only lasted like 3 rides, do you know what is the torque spec for the big jam nut? i was careful to not overtight it but i killed 2 sets of bearing in no time

[@nicksimpson4469]

You should have a cylindrical tube inside your carrier that acts as a spacer between the 2 bearings. No matter how hard you tighten the axle nut, it won't have any effect on the bearings themselves. If that's missing you will go through bearings quick

[@jeremihachey234]

Does the Tusk instructions tell you to apply blue lock tight on the posi lock nut, thanks

[@trailblogger]

i'm not sure, i always do anyhow

[@2004Banshee]

Just wondering how do you rate the tusk adjustable axle after having one in your banshee and your raptor intrested to know thinking of buying one

[@trailblogger]

I love it. Much better to have the wider rear. This is my second one. I had one on my YFZ450 also for years.

[@jnkmal2004]

What websites do people use to find used atv’s for sale? I found a couple, but I’m not finding anything I’m willing to buy.

[@yxiscatti]

Are you fine? no more videos?? Did you measure how much wide is your front end? It looks like its more than +2 on each side with the New shocks and A-arms. I what gear are you doing the wheelies after the turns? Thx!

[@trailblogger]

I'm good. New videos will be back soon. Thank you for asking :-) its +4 overall and a bit wider when squatted own. Most of the wheelies in this video were second gear throttle up. Some third gear clutch ups.

[@yxiscatti]

@@trailblogger Im Glad you are fine, and thx for the answer. I appreciate your videos, so will be waiting for them. Be safe and have fun!

[@ME-wq8lq]

You like the raptor over the banshee?

[@Mystorytilnow]

Have you had any issues with the big axle nuts loosening up? (The ones you tightened with the adjustable wrench and the pipe wrench.) I’ve heard a few people say you have to tighten them every so often because they come loose

[@trailblogger]

it did come loose once or twice. I used loctite last go around.

[@Greywolfwarrior]

Nice 🤟🤙

[@moatatreh4422]

whats the exhsaust??

[@trailblogger]

Alba racing full exhaust and ECU tune

[@dustinrichards8401]

Just saying if you want your quad to be the loudest quad in your location buy a full system monster shorty exhaust

[@trailblogger]

Pretty happy with this one thanks 👍

[@ShortkillaProductions]

Can you take off the little plaque that says “tusk?”

[@trailblogger]

yes it is just a sticker

[@ShortkillaProductions]

Thank you man

[@chazzthaspazz4475]

I ALMOST GOT A 700R BEFORE MY 19 YFZ450R WHICH ONE DO YA ENJOY MORE?

[@trailblogger]

I have only owned a carbed YFZ450 (which I sold) loved how agile it was but the power of the 700 is addicting.

[@chazzthaspazz4475]

TrailBlogger dang man. You left the yfz world:( are you going more trail riding is that why you got the 700?

[@trailblogger]

yeah but i still want a yfz also now lol

[@trailblogger]

i have a YFZ 350 twin still though :-)

[@AtvAdventureVlog]

Great machine! Nice Video! #atvpassion

[@tiguy225]

What is the torque spec for the big axle nut? I cant find it anywhere

[@monahumada7535]

Yo nice videos bro. Im in the market for a new bike. I have been riding a DS650 for years and want something close to it. Have you ever rode one and if you have is the Raptor close to it?

[@trailblogger]

ive never even seen one in real life lol. they look pretty burly, cant really compare though sorry. only other large quad i would consider is a can am renegade but they are $$$$$$ and i like the sport quad feel with gears more than a massive utility machine with 4x4 and automatic. 1000cc 91hp moonsters though

[@monahumada7535]

@@trailblogger Yeah I wanted to stay with can am but those bikes aren't much cheaper than the maverick. A lot of people don't think the DS is fast. Stock it is a tad bit like an elephant but when I threw on a dual looney tunes, carb and intake I would take out cammed Honda 450's if they didn't know how to work the clutch. Im in Arizona where it's mainly open desert and a whole lotta dirt, rocks, rivers, washes and holes so the size of the bike is no problem for our trails. The bike lacked absolutely no power in the Glamis dunes and China wall was a blast. I have seen a few videos on the 2020 raptor talking about how the bike feels like it looses power on top end and it feels squirmy at high speed. Thats keeping me from spending $10k on a new toy. Thanks for getting back to me so fast!

[@trailblogger]

yeah in stock form the raptor is pretty corked up but with the big 3 it wakes up. i admit i bought mine more for the low end, not much use for top end here with the rocky winding trails. the stock suspension sucked because i bought the base model, still feels top heavy compared to banshee or yfz but a ton of torque. going a little stiffer on my shocks might help but i love to leave them soft for long rides, get that nice cadillac feeling lol

[@monahumada7535]

@@trailblogger Haha thats funny, my friends call their DS their fat guys lazy boy

[@trailblogger]

yeah the fox floats makes it really nice in the whoops and rocks

[@jadeklein8819]

quick question , Is that what Mx Quads use nowadays ? pls let me know thanks

[@trailblogger]

this i built mainly for trails and riding, they do race these in the baja series but for mx it is the yamaha yfz450r that dominates

[@jadeklein8819]

@@trailblogger I mean the extended axle, is that what they are using ? or they just lowered the quad?

[@duxk4rmdao549]

Will a hmf power commander work

[@northendnec6120]

Bad ass!👌👍

[@manusitoo639]

very nice video #atvpassion

[@trailblogger]

Thank you

[@tylerallen6235]

Were have you been

[@niente58]

did you do any updates to whellie so simple?

[@jalisco872]

Does anybody have an issue with the wheel hub nuts coming loose ?

[@herbertmartin4320]

How much wider does it make it?

[@trailblogger]

it depends on how you place the spacers

[@RodyTF]

Where did you get this graphics kit ? its insane

[@trailblogger]

rival mx graphics

[@ATVGBulgaria]

Do you feel Raptor more stable with this axel?

[@trailblogger]

Yes. I actually didn't expect that much of a difference but it does help

[@ATVGBulgaria]

@@trailblogger Great :)

[@davidsaucedo4795]

I ordered the same axle and it didn’t come with both rings. Only one

[@trailblogger]

Write the seller

[@henrikmotlandreime3444]

Is that stock raptor rims?

[@trailblogger]

yes, stock rims (for now)

[@gasoline7954]

When will the next post be? Its been a while.

[@trailblogger]

SOON! I'm sorry for the lack of videos. Will get some posted sooooooon.

[@gasoline7954]

TrailBlogger Alright!

[@modingo]

Hey trailBlogger I’m 10 and a boy and I was wondering on what quad I should get do you have any suggestions?

[@qwartz2205]

probably not a raptor 700 if you are 10 i suggest starting with a raptor 250

[@edwinrosario3432]

Thats graphics are oem ??

[@trailblogger]

no. i did a video where i wrapped it

[@jalisco872]

9:08 does anyone know the part number to that c-clip or whatever it’s called ??

[@trailblogger]

wrote back on FB, let me know if you need more info

[@jalisco872]

@@trailblogger yup ! Thanks again I’ll get back to you if I have anymore questions when I get all the parts

[@raptordan6851]

How’s the axle holding up , I tweaked mine and was looking at tusk , do they have lifetime warranty ?

[@trailblogger]

Holding up good so far. Not lifetime, no.

[@raptordan6851]

TrailBlogger thanks man , I don’t want a Chineseium and a dominator is too pricy , I think I’ll try one out .

[@Chris-bl6hh]

Where did you get the decals from ?

[@trailblogger]

I did another video about them. Rival mx graphics is their name I believe.

[@prospenda]

Those front tires gonna last a while if u only use them to turn! lol

[@trailblogger]

LOL! I couldn't help it. So much fun

[@davidyan100]

Rear wheel direction confused...

[@trailblogger]

the rears i already worn the nobs down on one side and really i mean i doesnt make much difference in dirt anyhow lol. thanks for watching

[@davidyan100]

and thank you

[@jakem7400]

Put some Maxxis Razr 2s on and it will be perfect... I mean it’s perfect now but you know what I mean

[@trailblogger]

These stock tires are 🐎 💩

[@jakem7400]

TrailBlogger agreed

[@jakem7400]

TrailBlogger ever raced a kfx 700 before?

[@xrazex_v3358]

nice ! What gear you wheelie in ?

[@trailblogger]

That was mainly second gear but she will wheelie in third no prob

[@mrjones2189]

Nice thinking bout making my 2020 Raptor wide once I put my big 3 on next week... Did you keep the stock swing arm with extended axle? 👀

[@trailblogger]

yes because wheelies are fun lol

[@E4AdventureFilms]

E4 How To Install A Molle Fender Bag On Raptor (or any) ATV kzbin.info/www/bejne/hmO2fmaQq5WanbM

[@michaelbitanga487]

where can i get those spacers from

[@trailblogger]

They come with the axle

[@michaelbitanga487]

@@trailblogger Yes but the axle that I bought didn’t come with any so I’m looking for some

[@Chase_01]

2x4 mallet

[@trailblogger]

works like a charm!

[@sebastianskutek3024]

Hello Watch my movie as I was buying a new raptor ... greetings from Poland (you are my quad mentor:)

[@taylorf5924]

That rear axle is a little to tight

[@trailblogger]

Why do you say that

[@taylorf5924]

@@trailblogger maybe its a raptor thing but i feel it should spin alot more freely

[@trailblogger]

Fresh cut grass is actually great traction. I had the tire pressure down also for maximum traction so I could pull some wheelies. Trust me it would dig a double trench no problem but I was trying not to tear up my back yard lol