Laser Engraving Marble | Engrave Marble Coasters

[@cedarandsound]

As a tip, if you used the laser engraver to cut a round from a piece of cardboard with a hole in the center you could easily find the center. It's sort of like how people use the laser cutter to cut jigs for other laser projects.

[@Robonza]

You dont need to bother finding the center. You drop some scrap cardboard in the machine and cut holes for the coasters. This way you can engrave them all at once with no fuss. Also when you paint them you should put the coaster vertical because spray cans dont like spraying downwards for long.

[@TrotecLaserCanada]

+Robonza Hi Robona, thank you for your comment. These videos from our "Lasers in the Classroom" playlist are meant to give ideas for students and schools on what they can do with these laser machines, not necessarily for mass producing these items. But you are totally right if you are looking to do production work!

[@philmckay9973]

any work around it great lol now figure one out to do my job :-)

[@jasontaylor7419]

I do the same. I have cut out 4 circles the same size of the coasters, in mdf. Then as long as my mdf jig is straight all my coasters will be fine.

[@casey6259]

Love the design on the coasters

[@TrotecLaserCanada]

Thanks!

[@kabar123ar]

What’s the wattage required to etch marble?

[@pyrofool123]

For those of you that want to use this center of coaster method for smaller projects instead of making a jig for multiple coaster placament, a centering square will come in handy and you can use it to find the center of all size circles so you can easily do tons of projects like this and there pretty cheap.

[@rizkiamrillah1510]

what is masking tape ? are this same paper tissue toilet ?

[@jbbj413]

So I just learned how to use a laser engraver here at work. Its mainly used for metal, sometimes plastic but no ones used it for marble. That being said, i would like to engrave a small headstone for my wife’s cat and I’m unsure of the best settings for the laser. Ie frequency, scan speed, dot delay or if multiple passes are recommended. TIA

[@wsparry1066]

Hi what setting would you suggest for 5.5 diode laser ,IAM new to engraving

[@michaelbordignon2167]

We are looking at buying this machine for our stone company, on the speedy 400 do you use the co2 laser or fiber laser on the white marble?

[@tiffanypalmer32]

Do you have to seal the coasters after spraying them so they can be used?? If so, what do you recommend?

[@surendersabharwal5765]

what is the speed and power

[@cleobalbido6189]

how much does it cost, im from philippines..and what's the model of this unit? thanks

[@Nothandlecraziness]

Hi, tks for sharing. Is masking tape a must?

[@Selma8070]

Hi, how deep were the engravings? thank you for the video! and can you suggest more machines that can do the job other than this one? thanks :)

[@TrotecLaserCanada]

Hi Salma, any of our laser engraving machines can do this and you can control the engraving depth on things like marble - lower the speed. The depth is about 0.001" on these.

[@myarodriquezandangelorodri9269]

Hi can u tell me what size these coasters are please thank u

[@dipakkelapure8508]

So nice of u

[@NicTuber20]

What speed and power settings are you using?

[@TrotecLaserCanada]

100 power, 55 speed on Speedy 300 100w

[@xeb]

Thank you!! great

[@polariscat]

Thank you for this great idea. I've been looking for a maskin tape like this for a while. What brand is it?

[@TrotecLaserCanada]

PinballViking are you in Canada? We sell it!

[@polariscat]

Trotec Canada: No, I’m in Norway

[@TrotecLaserCanada]

The product is called PreView Plus™ Masking Tape. Hope that helps!

[@magicman9486]

any screen printing or vinyl sign supply

[@TrotecLaserCanada]

Thanks!

[@frankhiebert492]

am I able to do the same laser positioning with the Ray Jet?

[@Tipjar333]

Thank you for the video. Is masking tape required if no painting is involved?

[@TrotecLaserCanada]

Nope, if you engrave without masking it will turn white.

[@markenvaleria7896]

Hi, we have a 60W CO2 laser machine . What influence is line distance for you? For us it makes a lot of difference.

[@TrotecLaserCanada]

Hi there, what do you mean?

[@markenvaleria7896]

​@@TrotecLaserCanada When I hatch the vector file, I can choose a lot of options. One of them is line distance. Most of the time i use 0.01 and 0.02. Do you know the best line distance for engrraving for marble? Another option is the laser direction: horizontal, vertical, or round. (We are engraving marble jars). Do you have any experience with the best settings?

[@countdowntolife8867]

I need a sapphire crystal watch case back engraved. Can this also be done and where do I start with having this done?

[@TrotecLaserCanada]

yes you can engrave crystal with our laser. You just want one? Or selling them out?

[@countdowntolife8867]

Trotec Canada I need the sapphire crystal caseback of my watch engraved. Only one piece although I may want to have a couple just in case one breaks down the road.

[@TrotecLaserCanada]

@@countdowntolife8867 in that case you would need to go to one of OUR customers as a laser service job. You can google "Laser engraving service" and find a local shop, or google "Makerspace" or "FabLab" to find a local one in your area where you can go and do it yourself. We hope that helps!

[@bonnieknight7404]

What would settings be for a Speedy 300, 80 watt?

[@TrotecLaserCanada]

Hi Bonnie, we would suggest to watch this video for settings on any of our lasers: kzbin.info/www/bejne/aV6xiGyrrNylfKs

[@jeffhowell5101]

Where do I get a roll of that super-wide masking tape?

[@TrotecLaserCanada]

Jeff Howell If you are in Canada, its on our website www.engraving-supplies.ca

[@jeffhowell5101]

Thanks, but unfortunately I'm in the US.

[@fahmidasarker1923]

Jeff Howell signwarehouse.com

[@jardidge]

I work in laser engraving. On a trotec too. What power and speed setting to you use? Also whatt watt laser is the 400?

[@TrotecLaserCanada]

100 power 30 speed on 100watts

[@NicTuber20]

@@TrotecLaserCanada What would the setting be for a 50W machine? Having trouble with marble.

[@cleobalbido6189]

@@TrotecLaserCanada how much does it cost?

[@rajeshbharti9681]

Nice

[@TrotecLaserCanada]

Thanks

[@sunilbijapure8643]

I am interested in 3D engraving on metal , would you please help me or recommend me which one to buy

[@TrotecLaserCanada]

You would need a fiber laser to actually engrave metal. 3D engraving would not be possible on metal, usually on wood and acrylic

[@Cptblackbart]

Hi. What paint are you using. Please.

[@TrotecLaserCanada]

Any spray-paint will do. Thanks!

[@engineeringloboc6291]

is it possible for pictures?

[@TrotecLaserCanada]

Hi there, what do you mean?

[@jomikkelsjaastadhuse]

why do you need to put tape on the marble before laser engraving?

[@TrotecLaserCanada]

Thanks Fresc222, yes exactly - in the video we spray-painted the inside with a grey colour. If you don't want to have colour then you don't need to put the tape, the engraving will then just be white.

[@davidbann8388]

can a fiber laser do this?

[@TrotecLaserCanada]

Not on stone, sorry

[@netinfluencer]

@@TrotecLaserCanadaI´m sorry but You´r wrong. My S9 90w can do It.

[@bariebo]

Were the coasters sealed prior to engraving? Or just raw marble? Thanks!

[@TrotecLaserCanada]

Hi! It was raw marble.

[@markward3472]

Were these engraved with the CO2 or fibre laser?

[@TrotecLaserCanada]

Sheri Ward CO2

[@markward3472]

OK brilliant. We have a Speedy 300 80w. What settings were you using on the marble?

[@TrotecLaserCanada]

Power 100 Speed 45. You're looking to do a slower engrave to really get into the marble.

[@kevanbaldwin9165]

hi does any paint work on the marble?

[@TrotecLaserCanada]

Hi Kevan, well we've only tried spray-paint so we would assume oil or water based paints will work - but can't guarantee it.

[@apprehension1739]

Hey i want to run a engraving business how much investment it would required.

[@oceaneagle6554]

Price and other details of machine

[@TrotecLaserCanada]

Hello, thanks for watching. I've included a link to our website for our machines and our materials please feel free to browse and see all the things we offer. Thanks! www.trotec-materials.com/ www.engraving-supplies.ca/

[@roshanmenezes3299]

Hey, I am also planning to purchase this kind of equipment. Any support in Mumbai, India? Please do let me know.

[@TrotecLaserCanada]

Yes please go to www.troteclaser.com and go to the Contact page to find our India location.

[@Cihangirtp]

stupid shit we are ordering those machine from indie :D ask there for a co2 laser machine

[@suhailuddin2083]

I have beautiful tea coaster WhatsApp [phone]

[@RonKillian]

Cool, but no settings helps no one :(

[@ryandariushwood225]

Forgive a question from an ignorant American, but is this a center where customers can come in with DIY projects and do them with some assistance from the staff?

[@TrotecLaserCanada]

Not an ignorant question. We would recommend to go to a MakerSpace or FabLab in your area and they can assist you.

[@maksaab1]

made Chinese or ? required for quartz stone and river pebbles, price? Muhammad Ahsan Khan , from Alnisa Minerals from Lahore , Pakistan,

[@TrotecLaserCanada]

Hi Ahsan, the machine is made in Austria. Quartz stone and river pebbles are possible - we'll be releasing videos on stones this month. We cannot give pricing over the internet, but if you provide your email we will forward to our partners in Lahore.

[@salihelhilali1132]

I can put any color!

[@designbam780]

Design looks SOVIET from the 80's...

[@WhoDatAficionado]

Have you used crayon?

[@TrotecLaserCanada]

Nope just spray paint.

[@rudratailor3001]

Hello sir , I want to collect all information about laser engraving in agate sir so please support me Name of this machine How to purchase please give me guidance 🙏

[@mariasilva1463]

como fazer pedido

[@userxalqkwolakpmcnzxbeywrquagx]

nice...

[@ActuallyThijs]

VSauce music!

[@TrotecLaserCanada]

We love vSauce!

[@noahbarigye9146]

i want to buy engraving machine, could please help me and recommend me the good one i want to start this business am new

[@TrotecLaserCanada]

Hi Noah, which country are you located in?

[@noahbarigye9146]

@@TrotecLaserCanada Uganda

[@TrotecLaserCanada]

@@noahbarigye9146 our closest office to you is in Kenya. Burhani Graphics P.O. Box 6676 Nairobi KENYA Tel: [phone] Fax: [phone] E-Mail: [e-mail] www.burhani-graphics.com

[@almacastillo7388]

Jewelry ok stainless steel

[@TrotecLaserCanada]

Nello Avils you can engrave stainless steel but not cut

[@NonyaBiznuss]

You produce communist propaganda? Che Guevara at 5:11 ???

[@matthewborg94]

Sheesh use a jig. Learn the terminology.

[@blackbeton3923]

WTF with this trick to find the center of your coaster 🤣 dude use your laser just once and cut a template out of cardboard, or use a 3d printer, or a round piece of paper with a hole, or one of the 1000 other better ways do things quickly , seriously… sorry for this haters sh•• I’m Saying but why getting things complicated when they can be so simple (and accurate )

[@blackbeton3923]

The result is really nice though 👍🏽

[@user-mz2lv2tb8v]

what is the speed and depth of the laser