2001-2010 Duramax HSP Billet Thermostat Housing Kit

[@jphillips472]

Just found this video. I wasnt picturing in my mind how this would mount, and how my electric fans would interact with the kit, but looks like it wont be an issue. It'll really clean up my engine bay even more. Thanks

[@p.h.9356]

How can you claim increase flow when the two thermostats are the same? The thermostats are the choke point of the system, the system pressure and flow rate of the thermostats were not increased. Seems like it's just eye candy, that no one will see. Post some flow rate numbers before and after.

[@erniehenshaw4065]

I Agree!!

[@Aaron-hype]

Good point. Also with the design, it seems the sharp "machined channel" would cause more turbulent flow rather than the original rounded (and more open) laminar flow.

[@jacksnodgrass2968]

the thermostats are not the same ,thet are pimary and secondary

[@ToXSicK1340]

There's always got to be that one guy, huh??

[@martingomez-jv5mz]

Yeah I agree and when it comes to doing work on the truck like replacing the fan clutch you'd have to remove the hose and drop coolant. It looks good just don't think good enough to have the extra work.

[@Wretched2JZ]

@12:39 😂 that’s funny I just looked at the screen and looks like a blue quart of oil jug lol

[@bobanderson8048]

Excellent video! That guy is very good at explaining his every step.

[@TruckMaster]

He’s awesome

[@pancakes7529]

Wow that hsp set up is way cleaner then the wcfab stuff no question. Also it’s an actual cold air intake unlike the wcfab filter on a stick. Great video!

[@TruckMaster]

I totally agree

[@tyler1671]

Wc fab is trash

[@ozziecrosby2092]

I purchased a one piece Y bridge from HSP. 600 bucks and they couldn't even throw in the O rings. Had to go to napa and spend another 15 bucks.

[@brandonbachman7677]

May I ask why you have to take the intake and y bridge pipe off

[@CLEETUS_BMM]

Those mirror caps and chrome on he rear bumper would look so good color matched.

[@seabee73]

I ordered it with the truckmaster code and saved $20.

[@TruckMaster]

Awesome glad that helped

[@zacharyperalta2184]

Already have a lot of upgrades on my LB7 1st chance I get though I'm ditching all the old stuff in gone with the full HSP kit valve covers the works

[@ds-zd9qz]

Why do you need to replace the oil fill neck with an LBZ one? or am i missing something

[@thomasmolitor960]

GM makes a stock one of these meant for the Van versions.

[@jphillips472]

So I actually just realized something. We always talk about 90 degree bend are bad. And the stock housing has a 90 transition. But doesnt the kit use a 90 degree bent coupling from radiator to top tube? So the old routing eliminated any tight bends, but this one just moved the bend from the housing to the top radiator coupler. Im still ordering my kit, but the elimination of tight bends shouldn't be a way to sell this product. It cleans up the engine bay, it eliminates the turbo thermostat which could potentially damage a turbo if it fails, it eliminates the top steel tube which corrodes and leaks, (thats where mine is failing), and while doing all this, it looks spectacular too.

[@davidbutler501]

Do u need to put alot of lbz upgrades on a stovk lb7 w less then 160K miles...aka mine is a 1 ton crew cab long box dually...4x4

[@robertchaney7766]

Nice install video! 👍 cant wait to see my LML on your channel of the damn parts from HSP ever show up to diesel pros!! Lol Cant wait!!

[@TruckMaster]

Nice 👍 I will get that truck on the channel soon

[@seabee73]

I'll have to get that sometime this year. Great video.

[@UnKnown_11619]

Where can I find that oil fill neck I like the shorter look

[@mauroaparicio1855]

do you have one for 2008 volkswagen passat 2.0turbo

[@chasewalkes1448]

I actually just bought this kit for my lb7 just so I would have coolant constantly running through my turbo instead of having that awkward third thermostat🥴

[@lancewilliams3396]

Is it my imagination ornis the HSP piping bigger in diameter than WCFab? The intake and intercooler pipes all look bigger.

[@TruckMaster]

I’m not to sure

[@DanTheRazorRamone]

Are people running these turbos without coolant ?

[@BassickS77]

Awesome video man

[@TruckMaster]

Thanks 🙏

[@davidwilliams856]

Why would you buy this? must be a hipster thing lol

[@Wretched2JZ]

Lol that stupid guard on the front of the radiator would have been the first thing to go for me 😊 I HATE those things. I usually quickly cut it out of there! Makes it impossible!

[@ericmartinez5633]

hard tosqueeze to see if ur headgaskets are bad now. will have to do pressure coolant test instead

[@garynewsome674]

Can it be used on a stock truck

[@TruckMaster]

Yes

[@garynewsome674]

Ok thx bruh you sell them or?

[@erniehenshaw4065]

I was thinking of a Chrome Water pump pulley Too.REALLY!

[@larrywebster7203]

Next time find someone who knows what he is talking about. Lol. He made that look to easy. Great video.

[@TruckMaster]

👍👍

[@duramaxcountryboy2107]

Another great video 👍

[@TruckMaster]

Thanks 🙏

[@erwinnez3735]

Thx on the cool vid mr truck master

[@TruckMaster]

Thanks and no problem 👍

[@mastaflex8960]

Na man , this is like burning money just to impress people you dont even like ,

[@timmyhall2026]

So has anyone had problems with the fan and the pipe possibly hitting? Looks very close to call

[@TruckMaster]

No it fits good

[@ericblakeney8776]

Good video thank you truck master

[@TruckMaster]

Thanks 🙏

[@Fordguy7998]

Where is the link?

[@tekolote81]

awesome video

[@adolph289]

awesome I want one

[@RobertKohut]

Nice!!

[@dixiemae5042]

Cummins install would solve global peace 🙌🏻🤷🏻‍♂️

[@jonathoncatterson8901]

Too many problems

[@Chevyfan-tl2kw]

Junk

[@danieleames4055]

Cummins swap = installing gay dodge tow mirrors running with them up = total douche! Honestly Cummins is a great motor but the mirrors are ugly af!

[@turangamorou779]

Nice

[@TruckMaster]

Thanks

[@MrRR-uo4dl]

Is it me or do they look like brothers

[@newlion7013]

All just for looks, if you can see it lol. The thermostats are still same

[@TruckMaster]

I looks good but it’s definitely worth it for the extra room in the engine bay

[@dixiemae5042]

My gosh Cummins so much simpler 😢

[@evanch123456]

Yep that's why you like it cuz you take the easy route. Duramax guys like a challenge.

[@erniehenshaw4065]

I don't see the advantage vs dollars spent.Expensive eye candy.

[@kylescaggs]

You are describing 90% of the modified truck market.

[@Chevyfan-tl2kw]

Lemme guess 400 bucks lol no thanks

[@Chevyfan-tl2kw]

That blue with green is just bad colors my opinion. Why..... blue looks nice, maybe black or chrome badge not green

[@ozziecrosby2092]

Agreed

[@krich270]

Being as this is my truck, I can tell you exactly why the colors were chosen. Blue and lime green are my favorite colors and I enjoy the colors together.

[@Chevyfan-tl2kw]

Okay as long as you like them that's what matters..

[@newlion7013]

So much $ you have spent over the years, you shouldve just bought a cummins

[@jonathoncatterson8901]

That's even more money

[@TruckMaster]

This isn’t my truck he is working on but nothing beats a cat eye Duramax I’m my opinion 👍

[@Chevyfan-tl2kw]

Cummins sound like shit! dmax all the way

[@dixiemae5042]

First third

[@rezorekt]

I stopped watching when the guy said take off the negative terminal first. SMH

[@TruckMaster]

What would you do? That’s how you are suppose to do it

[@Chevyfan-tl2kw]

Right..

[@rezorekt]

@@TruckMaster positive always comes off first. Not all systems are battery grounded, you could still complete a circuit with the positive wire attached and the negative removed.

[@mattpettysc]

iAm Wolfie If a circuit (continuity) is broken (open) at the source (battery) current cannot flow. The vehicle chassis may serve as ground but only because it is connected to the battery ground completing the circuit. As shown in the video, safe practice is disconnect ground first.

[@rezorekt]

@@mattpettysc okay do me a favor. Disconnect your ground first. Take a jumper from your positive and touch it to the starter motor positive. See if your theory works

[@keng5170]

First finally 😂

[@TruckMaster]

👍

[@dixiemae5042]

Only because phones don't work in temps of 110 in Vegas