HSP Install Duramax Cold Side Pipe | Up-pipe | PCV Reroute LMM/LBZ

[@keithrheault5110]

You are awesome. I was a gm tech for over 30 years. Worked on many duramax. I am impressed. Skill,speed and quality.

[@SUBI_PaT]

This is exactly why I watch your videos man no matter the time or how long it takes you to do it I can always count on the quality an the honesty of what you think you tell it like it is an no sugar coating of anything,happy Memorial Day thank you for your service an for everything you’ve done for this beautiful country of ours.

[@johnheath2496]

The hot wire you point out at 4:27 in the vid where you recommend cutting off and taping up....is that for the air heater? Thank you

[@toyotabay442]

Thank you so much truck master for your time with these videos you help so many people out including me!

[@TruckMaster]

Awesome! Thanks man

[@norsevikingsir4932]

Won't that blow the bellows out?

[@linksgarage1985]

On behalf of America, keep the freedom coming! Diesel runs in the veins of this country. Have a great Memorial Day folks. Remember what it represents. Cheers from KY.

[@TruckMaster]

🇺🇸🇺🇸

[@9856CB]

I’ll guarantee that oil sludge buildup was from driving the Duramax to and from the grocery store (grandma style). The Duramax truck is for towing and work. When you drive hardly above an idle, you’ll have that buildup. I’ve got 140000 miles on my stock 2006 and fell for that EGR cooler and EGR valve buildup. My EGR had minimal soot and my EGR cooler was clean. I’ve towed a 40 foot trailer cross country 4 times and that truck has been flawless. If you want a tune, go with Banks Power. It’s CARB rated and minimal install.

[@TruckMaster]

Great point 👍

[@ricardoruiz6612]

what tune do you recommend going with on the lmm

[@brandontokarski1023]

So pumped for this build HSP is right up the road from me and I’ll definitely be using their products on my LMM. Thanks for the content bro

[@TruckMaster]

Thanks

[@flhtru1464]

For my pcv reroute, Amazon, 2 in and 1 out catch can mounted on the firewall. Tubing cutter on the stock pcv fittings and about 6 feet rubber hose, 6 hose clamps. The out goes back into the turbo which after the catch can has no oil at all.

[@korn111685]

This brings back memories. A pain, but worth it.

[@ORiely]

Great Video Josh, Your video's are just the absolute best in every aspect!

[@TruckMaster]

Thanks 🙏

[@-Ascender]

fantastic and very helpful video, I'm about to do a full HSP kit, cold side w/ Y-Bridge, hot side and CAI and this makes me feel so much better about going forward with it. I wish the video included the Y-Bridge but overall thank you for the help!

[@TruckMaster]

I did a ybridge video also 👍

[@-Ascender]

@@TruckMaster perfect! ill go check it out

[@kevinshenk4960]

Great video! Can you do a video about tuners and where the best place to buy one with EGR, DPF delete tunes?

[@johnthompson5409]

I have almost finished installing a LLY into a 2008 That had a LMM but when I got it the truck had NO Engine in it. I'm Waiting for a couple more parts intercooler and cold side piping and filtered intake and a tcm and for all reasons I can't see why it won't start and run but I'm being told it wont..? What do you think.?

[@leviwoodside6830]

What the part number for the cold side intake tube with the bracket.? I can’t find it anywhere

[@TruckMaster]

Unfortunately they stopped making these

[@leviwoodside6830]

@@TruckMaster so what do you prefer for the lbz.?

[@wrenn54]

Can you give me the link for that coldside pipe kit. When I look it up I keep finding it discontinued.

[@williambailey9012]

I cannot find it separate for the LMM 2007.5-2010 except for the price prohibitive “kits” that are $700+ either. Contacted HSP, waiting to hear back.

[@gergman247]

When you do the EGR and EGR cooler deletes are you taking the entire thing out and not reinstalling?

[@williambaker6528]

where can I get instruction on the LLY almost and kind of don't help me I just got my first diesel and have to do a whole bunch of stuff my exhaust is rotted out with holes so if you could help me out with numbers other sights anything I would be grateful

[@rmasse2151]

Can you still buy this kit without the y bridge?

[@dallasdietrich4771]

I have a couple questions for you im about to do turbo swap and egr delete was wandering if you could answer a couple ?s

[@Dubsspeed]

Damn man I've been here since the very beginning install sinister shit on the ol' dmax just a couple thousand subs and now look at u just under 100k and doing videos with full on performance shops! Impressive how fast you have came in so little time man keep it up!

[@TruckMaster]

Thanks brother

[@Dubsspeed]

@@TruckMaster oh shit even got a reply from the master himself! Congrats bud! U inspire me so much i have the entire from end out of my truck just to change out some diff, frame, and lower control arm bushings! Then once front is done moving onto the rear leafs and shackles! Doing it on a Southern comfort edition duramax of course!

[@jasonwilliams7167]

Hey, what is the link or part number for that cold side intercooler pipe? Don’t really want to replace that y bridge and I can’t find that one that you installed my current pipe has a hole in it

[@arnolortiz2267]

Hello i have 2007.5 duramax lmm i want to delete the egr My question is if I just replace the parts or do I have to do something else?

[@thomasfbusche2870]

I have a 2006 lbz. I want to install a new cold air side. My concern is how do I turn off the check engine light due to the air heater missing? I eagerly await your answer. Thanks! Buy way I really enjoy your videos. Keep them coming. Thanks again. Tom

[@michaeleni4589]

I still have an egr on my LBZ, but I did do the 3" downpipe meaning meaning I had to get rid of the stock dp. For some reason I didn't want to bend or cut that heat shield on top of the turbo and I was able to do the entire job just moving it forward and out of my when accessing the back of the turbo. Re bolted it in after the job was done. A fairly insignificant part of this job, but something I did do...

[@StJello]

What do you connect the PVC tube when you reroute it. I need as much help as possible. I'm building a Lmm for my daughter as a gift for 2020 graduation. She got screwed out of PROM. They also don't get a proper graduation because of the covid 19. Please is there away we can talk about it. The truck was supposed to be mine but she fell in love with it.

[@TruckMaster]

you connect it to nothing I just zip tied it along the frame so it can vent 👍

[@bobriddle6068]

Round up a magnetic induction heater if your going to be playing with any of the exhaust bolts.

[@guycruise7121]

Just found your channel, outstanding info for a new Duramax owner. I just purchased an 09' 2500HD and would like to know how to purchase these parts? I have looked on the Wehrli & HSP website and could not find these items. Are they not available? Thanks for all the info.

[@CassadyCondash]

Hey great content thank you first off. I’m working with the same lmm in this video but I can’t seem to find that cold side pipe with hold down bracket anywhere. Any help?

[@daltonchard9891]

So the pcv reroute could you go bit more in depth were are you running it?

[@TATER925]

Is there a need to plug or cover the holes under the new cold side tube? The holes that fed into the actual EGR where all the soot was collecting from?

[@ericvortecmax]

Who do you recommend for lly delete tunes

[@fievelhw2258]

Does this pipe have a spot for the MAP sensor? I didn't see you talk about it or see it mounted on the pipe, unless I missed it. Great video and info as always!

[@TruckMaster]

Yes it does 👍

[@karterbarfuss5497]

I can’t seem to find that up pipe all I can find is a 2001-2004 I don’t think that would work or will it ?

[@mikeonthesmokey2619]

Getting ready to do the pvc re route today, just watching the video to make sure I’m doing it right. Question, the tune I have turned off the EGR, doing the delete won’t throw codes if the EGR motor is unplugged? My motor is still active from what the tuner told me

[@robertcavazos4043]

That was an awesome video truck master, that is exactly what I want to do to my LMM, do you have any torque specs for the up pipe or do you use locktite, and would you recommend a catch can for the reroute?

[@DylanMurray-s2u]

All of that funk in the intake was from the egr correct?

[@joshridgell4312]

Awesome vid! So if you get the full y bridge do you still need the pcv re route and all tht outher stuff? is it simpler to just go full y bridge?

[@TruckMaster]

it’s better to go full ybridge but this is a great option for easy install. The ybridge is a tough install

[@WBOS72]

Awesome wrll detailed video. Thank you.

[@AJ-hl9ig]

Is this to a factory y bridge? I don't recall you saying in the video.

[@idahoanm618]

I just watched your amazing video on this delete, I have a 06 LBZ with EFI Live with DSP 5. If I do this delete do I need to reprogram my tune? Do you have a video on this? Thanks, Idaho Mike

[@michaelperkovich4118]

Is the H/S Mini Max okat for someone who is just trying to do the cold side up pipe egr delete/ dpf delete? I am not looking to make a ton of power. Thank you.

[@jonathanneumann7134]

When doing this how does the truck pass emissions now ?

[@brucespringsteen4464]

The PVC kits I see have a tee in it do you have to install it

[@markh.2899]

Dang! I cannot delete my EGR valve/cooler on my 06 LBZ since I'd never pass the smog test here in CA, so I'm gonna upgrade with a Bullet Proof cooler and a new EGR (OEM) valve. Right now, I'm only getting a few lbs of boost and PO101 and PO299 codes. I looked for boot disconnections and found it on the cold side Mishimoto intercooler that goes to the EGR intake horn. Unfortunately, I'm going to need help with the boot re-attachment. Thanks!

[@brenanroach6867]

Hey man I have a 2007.5 LMM GMC SLT grandpa pickup with almost 89,700miles on it. I’m looking for direction on some needed repairs.

[@AlexBerry-qr5yi]

Where did you get this pipe?It is not on the website listed

[@alejandrocarranza5611]

Truck master if I have my air box converted with 4 inch tubing but stock box with aftermarket filter should I change the lbz mouthpiece to sb mouthpiece

[@lbz_3074]

So I bought the full kit for my lbz from hsp and can’t remember if you made a video on it but was just wondering how difficult it was to install the y bridge if you had a video or good recommendation for one would be helpful hopefully getting it in the mail soon been almost a month lol but got the down pipe and up pipes so this video will help tons!

[@TruckMaster]

kzbin.info/www/bejne/al67d4agl61phsU

[@lbz_3074]

Thanks!

[@keithautterson9302]

Dude I love your videos so detailed I have all the parts to delete my lmm egr but I'm scared to do it lol I'm scared to snap a bolt on the turbo I need to stop being scared and just do it

[@abouttogetlit5120]

What’s the benefit of doing the full Y bridge over just doing this?

[@TruckMaster]

The full ybridge won’t leak air

[@dustinhart9455]

This won't leak as long as it's installed correctly and stock turbo. This works great unless you do aftermarket turbo and push more than 35psi boost.

[@brodybunker2732]

Does HSP not sell this anymore?

[@nicolasleber4322]

I don’t think they sell it anymore been looking for it but I found that pusher intake are making one

[@shawnstoner8958]

You said this corresponds with the lly. Does that mean this cold side pipe with the bracket will work on a lly with the factory y-bridge? I ask because its not listed in the lly section of the HSP website?

[@TruckMaster]

Give hsp a call but the install process is the same the pipe isn’t

[@TruckMaster]

hspdiesel.com/duramax/lly/intercoolers/

[@shawnstoner8958]

Thanks for the info. Your channel was the one I used most for research when I bought my first diesel.

[@Patzfan4eva]

LML, LBZ, L5P, etc...which is suggested for ease of mod and long life?

[@mirkamarioguillen4835]

I'm confused with one is better the bridge or hsp

[@rushdestroyer5724]

I can not find that cold side pipe for my lmm to use with stick y bride

[@albertorodeos497]

i took mine out and mine has a EGR temperature sensor code how can i fix that

[@bernardogarcia7351]

So what kit is this ? I noticed you left the stock Y bridge if im not mistaken, is this set up better or the same as an aftermarket Y bridge. Awesome videos btw thanks in advance

[@williamdoversberger4341]

Yes, what pipe is that with the bracket, can't find it anywhere.. thnx

[@chaytonhaveron8668]

So where did you find this LMM cold side tube with the bracket I can’t find it on the website

[@philmeyrick3363]

Great video, thanks. Have you ever done a LB7 to LBZ swap? I am just getting ready to do that on my 2004.

[@MartinDiaz-yz4nv]

Where you located at? I need tune up for 2013 chevy silverado 6.6l duramax

[@braydonthornton1849]

I know video is from a long time ago but any chance you know what kind of cylinder heads are on it?

[@williambailey9012]

What did you use on this LMM truck for the tune to remove the EGR? EFILIVE?

[@alexandermenningmann5469]

Trying to decide between SDP and HSP Y bridge and intercooler pipe kit. Do you recommend one over the other? Thanks

[@VladimirKolombet]

Hey man, I searched HSP and all the web. Can't find that HSP charge pipe that connects to the AC with the bolt. It looks to not have that option anymore. Anyway you can help me find it? Would greatly appreciate it

[@delta3garcia]

I’m throwing a intake heater code now 🤦🏼‍♂️. My truck came deleted so I don’t have the EGR code to deal with. Now I have to find out how to time the heater code out.

[@marineguy0311]

What tune would you be suggesting? I have a Bully dog GT tuner.

[@lonniehale3659]

I cannot find the HSP Cold Side Pipe either. Have you seen another kit that has the mounting bracket at the compressor?

[@Steve_I]

I ended up going with an ebay kit since the big name companies arent selling them. At least not online. Works the same at a fraction of the price.

[@delta3garcia]

Why did you make that u shape hose instead of running the hose to the line off the thermostat housing?

[@benjaminfox324]

I have the same question and can not find any information on it

[@benjaminfox324]

I am not understanding where the hose goes to the thermostat if you make the U shape.

[@MiguelTorres-fe1yk]

So my lbz already came tuned with a dsp5 switch when I get a delete kit from HSP deluxe kit will I need another tube or am I fine ?

[@joserincon6843]

by not connecting the egr can you ender a fault code?

[@davidconrad8577]

Hey, hsp says the dont offer that anymore.. any suggestions?

[@realroadsideservices5862]

Would you recommend doing a pcv reroute on a 2019 duramax? Or is it a different situation?

[@joedoucakis1159]

Would I be able to pass a smog check in California after this install?

[@FzjClay]

Really love your content man. I have watched your videos on the lbz delete kits and need help with this. I have a 06 duramax that hasn’t been deleted and I have no idea where to find what I need. Can I get a link to your kit Since your links on the older vids don’t work? Thank you if you can help man.

[@TruckMaster]

hspdiesel.com/hsp-diesel-lbz-lmm-single-style-max-flow-bridge-coldside-tube-behind-alt-7078

[@Pichilile1]

@@TruckMaster Isn't yours 1 solid piece instead of a 2 piece ?

[@allinmotorsports623]

what is the part numbers for these two kits as well as the resonator plug? definitely need to do this to my LMM

[@philmeyrick3363]

Where do you get that cold side pipe that doesn't require swapping the Y-Bridge? Looked on HSP site, don't see it. Thanks

[@philmeyrick3363]

Update: It is discontinued.

[@brucespringsteen4464]

Thank you, you did a great job explaining everything

[@clintmcwilliams2017]

If I do this to my truck will it pass the Texas state emissions inspection?

[@j.d.martinez153]

What do you northern guys use for penetrating oil? Out of the three of the last five jobs that I’ve done, those 12 point nuts fail or the studs break off, and yes I even had it where it’s taken me almost a complete day to just loosen and carefully back out the hardware. I use PB blaster and hot wrench. Good stuff as always, man. Any word on backroad Diesel?

[@TruckMaster]

PB Blaster all day! Also Kyle stopped making videos but he’s still around

[@j.d.martinez153]

Truck Master have come on as a guest speaker if all possible. Cool dude. I know he had some medical problems. Just let him know he still has a fan base out there still.

[@salreyes3215]

Do you need to tune it if you only do a PVC REROUTE?????

[@TruckMaster]

No

[@pedromartinezjr5907]

@truckmaster what exact part is this on the HSP site as.. i may be overlooking it and can't seem to find it for my LMM

[@felixtrinidad3146]

So Is what they call egr deleting ?

[@JGSCORNER]

Are you able to provide the link for the parts? Not able to find that pipe anywhere. Thank you

[@TruckMaster]

Give HSP a call in the morning 👍

[@Steve_I]

Did you find one? I ended up going with a cheap basic ebay kit. Up pipe was separate tho. Makes me appreciate my lb7 not having all the emissions crap lol

[@jackcorbacio1532]

Have you worked on savana,express van duramax engines.Im sure its tight

[@toddmurphy7662]

What fuel delivery system did you use

[@jeffmercer8389]

who do you use for TOW TUNE?

[@tywayn]

What web site can I get all of this from now? If it’s more then one website I’m fine with that

[@eldiablobiker]

Does this require tuning?

[@GrandeSasquatch]

Do you have a good recommendation for a tuner?

[@bullofthewoods9374]

tmaster, does hsp make that pipe for the lly?? I am about todo mine and really don't have the money for the entire wye bridge

[@TruckMaster]

Yes they do 👍

[@bullofthewoods9374]

thanks

[@kurtiskernan9460]

@truck master does hsp still make this? Do you happen to know the part number?

[@TruckMaster]

Yes, just give hspdiesel a call they should be able to get you setup

[@adolph289]

I would like for you to do my truck.. I have a 2014 with 58000 miles on it , I'm ready for it . what is the name of the tune you have on this truck.. witch do you recomend. I sent you a picture of my truck with a Duramax Life on the tail gate . haven't seen it on the opening or the ending of your videos

[@adolph289]

what is the Torque on the up pipe bolts

[@t.money1196]

Please do some color matching on this rig I just picked up my first duramax and this was very informative keep up the great work man!

[@joshwilkerson708]

I can not find this pipe. Only y bridge

[@charlesowens4864]

so did u just delete the EGR?

[@coleburton8245]

Where can I find the bracket??

[@MRW21783]

He ain’t lyin! 7 hrs 🤪 and you’re gonna be sore the next day lol.

[@TruckMaster]

😂

[@chadrizla496]

2nd that!!!

[@davidlemon9808]

I can’t find this part anywhere man