Tuning a W210 E300Td OM606 Mercedes Diesel

[@bobbybeyer2127]

Do you have anything planned for the CR engines like the OM611/12/13 or OM646/47/48?

[@asdfghjklkjhgfdsa69]

A 50% increase in power and 30% increase in torque is excellent no matter how ''small'' the numbers alone are.

[@c.i.m.1600]

To Luke and everyone at DieselPumpUK, excellent job, as usual. Great work and videos. I am impressed. Keep up the great work and videos. Much appreciated!

[@seanyt121]

Well done, good video on options available and gains available. through easy swaps.

[@davidhammond3336]

I want a a om606 for me Landy lol

[@rossmacquarrie6116]

Just found my new favorite channel. Your level of detail and knowledge in your instructions is genuinely outstanding.

[@EngineEngineer]

It comes across to the unfamiliar, yes.

[@benwhittaker8630]

Any major drawbacks of going to a full mechanical 603 pump in the w211? Apart from check engine light? Will the auto still shift alright?

[@Artursbodnars]

Mate, did you ever done something with 2.9td w210? It feels very slow after om606, is there remaping worth? Cheers!

[@jdantigua1999]

I wished my car was in Europe so that I could drop it off at your place and have it reliably tuned by you and your team. One day maybe?

[@mikestutt]

Luke I absolutely love your videos and every day I get tempted more and more to bin off the underpowered V8 in my SL and bolt one of your motors in. But can you pretty please edit your sound levels. You're really quiet and then the adverts come in 3x the volume. Ta muchly :-D

[@cadillacdeville1491]

I am sold on the OM606 , amazing video and channel I have been thoroughly enjoying this content and I will definitely be staying tuned for more to come

[@user-iq2jd8bd5c]

Excellent video - Some say the OM606 was engineered by those who walk on water....

[@hummermaniac88]

Great video! I'm curious to see a 7.5mm pump with the Hybrid turbo and Sean Tracey Stage 2 ECU, then that plus an exhaust. Please make that video!

[@seanyt121]

I make separate maps for 7.5-8mm pumps. Using a 4bar map sensor too.

[@hummermaniac88]

@@seanyt121 Hi Sean, I have your ECU, just need a new chip for the 7.5-8mm. my project hasn't moved from the last time we spoke. I was curious to see what numbers a 7.5mm pump with your stage 2 would yeild with the hybrid turbo or a T04e as you suggested me.

[@alcarez_z]

I once had a lil conversation with Ole (that 722.6 Gearbox-ECU-Guy from Denmark) and he told me that it’s possible to use his Gearbox-ECU in a car that gots a 722.6 fitted from the factory. So no problems at all 🤷‍♂️

[@jro6497]

@@alcarez_z who is this guy?

[@Jessersadler]

does this product no longer exist?

[@cullenmiller8170]

Happy New Year from the colonies to the West.

[@DavidArez]

Where can one buy the piggyback potentiometer?

[@alexanderdaniels9039]

I am also very interested in buying the piggyback potentiometer!

[@DavidArez]

I can't find it on they're website. I believe it is just an Evry mod

[@cybershoworiginal]

Great man, honestly your channel is one of my favourites. Love every video you've uploaded. 👌

[@dieselgaint]

Here in the states I had to have my ecu socketed and then chipped. Went rocketchip stage 2, immo and egr delete. It made 177hp with lite smoke. Egts get high and its spool up time is really slow below 2500 rpm. Other wise I'm happy with it. Planning on larger turbo and 8mm edc pump, if I can get someone to tune it.

[@GoogleAccount-tt5yx]

...but 177hp is stock!

[@dieselgaint]

@@GoogleAccount-tt5yx that's what it put down at the wheels. With drive train lose it should be around 210 at the flywheel

[@vincentcaputo7125]

Can you do a video on the edc pump with 7.7mm elements?????

[@oskytrosky]

So, whats the next step, what if you want a 250, 300 hp daily driver. i got a OM605 w202, piggy back + hybrid turbo only does de job?

[@KennethWalters-hx5iw]

Hi Luke Great too see what can be done with these engines. I am an Aussie, currently living in Bangkok, but have a W211 with an E270 Cdi. It has done 300k and is still going strong. Ken

[@robertadamson7196]

I have a W210 E320 wagon (silver) with the om613 engine. What sort of gains could I see from an engine with 240,000km on it. Still pulls like a freight train though. I am thinking of pulling and trying to shoehorn it into my 1987 BMW E28 (yep!). Will remapping ECU delete all the MBZ chassis I’d crap and allow it to be used in my E28. If I wasn’t in NZ I would bring both cars to you and let you do the work. Cheers.

[@MrAndrius12]

I seen a few videos where OM613 was converted from common rail to mechanical inline injection pump. Would be interesting to see DPUK doing something similar lol.

[@mbmann3892]

Dammit don’t tell me I can’t make 300 plus Hp with that generation Mercedes. I was thinking putting a 606 in the fist gen SLk. Since that’s the most smallest mercedes with a manual in America

[@hardmechanic1624]

I have a 1999 Mercedes-Benz diesel turbo I need the computer upgraded a little bit more power stage two

[@Dallas-GTR-86]

Hi just want to know I have E280 Cdi I thought some mechanic told me that’s the V6 diesel were built-proof engines Can you Clarify which one should I go for V6 or in-line 6 diesel?

[@alouisschafer7212]

42.000 Miles on the clock? I hope the owner will get many many more from this car.

[@drissios]

hi , greetings from morocco i have a W140 1998 with stock OM606 turbo , and 344K Kilometres , i would like have a little more power than original 177 HP , maybe 200-230HP (+30/50Hp max) with original electronic pump and ecu , can you help me please , in fact i have one condition , i dont wanna have a black smoke can you help me please best regards

[@vasilispants8241]

Have you measured the difference in fuel consumption going from an electronic OM606 to a full mechanical? Thanks for the great videos and keep up the good work!

[@alouisschafer7212]

there wont be all that much of a difference

[@Mathmusiciandlife]

Just found you and I love the channel. I have a 1978 F150 long bed super cab, I am considering a Mercedes OM606 diesel vs a Cummins 4bt to swap into the Ford. In Michigan I don't have to pass emissions testing so I want to strip all of the pollution control off and get about 400-500 hp. Could you do a show for us here in the USA without all the emissions junk and what would be the best tyranny combo for an automatic trans?

[@technicalitems731]

Done this yet? I want to do same

[@imbackinthegame3611]

how do you keep it from over revving when you use a M Pump ?

[@onsomebits7486]

Tuning box basically is a £1 1k ohm adjustable potentiometer, aka the evry mod, ive a Sean treacey stage 2 ecu with evry, hx35 and est it’d be easily over 300fwhp

[@prndrive8150]

Hello from Poland, I have a 210 ohm606 177 horses with an automatic transmission, I want to increase the power with minimal modifications, I replaced new injectors, a chain, I’m interested in a ready-made solution for a stock engine

[@justinhaller2055]

how much does a S210 with a 606 engine go for in your market?

[@matthiasvonrotz5348]

I got a G300 TD with the 3.0 Turbodiesel with 166 PS building @ the year 2000. I neew more Power... I wish 205-230 PS. Can you help me??

[@Sammyboy1335]

I have a 96 non turbo. Could I do this tune to it?

[@farisdelic5493]

You should make adapter to fit om606 on audi quattro transmission

[@rayjones463]

i dont like ecu,s can the 060 be run off of a normal injection pump or be made totaly mechancical

[@halimackgoz9518]

W140 om 606 TURBO DIZEL IMMOBILIZER IPTALI MÜMKÜN MÜ please cevap

[@styx7989]

150hp for an om606 turbo ???? A origin om606 must do 177hp dude

[@Bradseverns]

Love the channel. Looking for a 606 mb

[@3brandon]

I thought they didn’t use a ecu or something because of the injection?

[@bryanplunkett5150]

the stock application for the 98-99 om606.962 comes with an electronically controlled one. This guy (and alot of people tuning these) offers mechanical pump options that come with larger elements and such. It bolts onto the engine and eliminates the need for the ecu. This video is just showing options for people keeping the stock electronic injection pump

[@3brandon]

@@bryanplunkett5150 oh ok thanks for the info

[@Snailmailtrucker]

@@bryanplunkett5150 Excellent reply ! Thanks !

[@marksam6824]

Excellent work and positive information sir. Hope you well, thank you

[@vaughanrichards698]

Love the channel, these motors are excellent. I am considering buying one of these cars as a runabout, and tuning in the car with the possibility of swapping into the GQ patrol in place of the td42t. Can the car be run with early mech pump and ditch all electrics? Was there a manual box option in these cars? Cheers!

[@eedacunha]

The manual option exist and is considered a good drivetrain.

[@CainHalliwell]

Keeping my eye out for one of these in Australia to do this to

[@joshthomas2536]

I'm in the same boat as you. I have came across an om605 turbo for sale at the moment for 5k in Victoria and I'm on the border between Vic and NSW. Best part about this hidden gem is not many know about these engines so it gives me time to save. Hope you get a hold of one too.

[@thomastaylor408]

Same here. I live in WA, reaper preformance diesel have one they a tickling. Hopefully i can get a hold of one one day to put next to the 4j.

[@benwhittaker8630]

In the same boat here. I got told recently only 20 of them made it in to Aus. Only reasonable solution I've come up with is to wait a couple more years and bring one in from the UK under the 25 year rule.

[@Kvietosh]

How much would a tune like this cost today?

[@JKLpastori]

Why you say that you cant do anything on transmission??? there is lot of things what you can do on thoes 722.6 transmissions, its just your opinion that you should go manual bmw gearbox... fact there is even plug and play TCU controllers for thoes transmission have you ever heard Seaside Customs Garage or even Ole Fejer who makes ofgear.dk ? if you go big nag 722.6 transsmission you can pull more then 700nm on thoes motors.

[@Mathmusiciandlife]

Ps I have a 1995 12 valve cummins paired up with the notorious bullet proof NV5600 6 speed trans in my 1972 F250 4x4. I get 27 mpg.

[@angelogomes1561]

Nice vedeo thankyou... I have remove the head of min c250td 1999...cann you help me please i need to know to time the engine and boch injection Pump timing.... thankyou regards

[@mbmann3892]

Ecu...ECU....what’s this ECU you speak of. My 606 knowledge doesn’t compute ECU.

[@forzer45]

You can swap the 606's pump for a om603 pump, then you don't have to worry about any computers.

[@mbmann3892]

@@forzer45 isn’t the 606 pump mechanical...well the old ones?

[@forzer45]

@@mbmann3892 electronically controlled, maybe the g wagon ones are fully mechanical

[@orkm.c9602]

Always fancied one of these old E300td to tune up, can't find them anywhere these days!

[@einfelder8262]

Weird - who does an ECU remap and leaves EGR operational...... What causes the engine to rock about on wind-down, given you're in neutral.

[@lilvirtt3577]

Hey, did the w210 300td came with a manual transmission?

[@tiagogomes2857]

You are to the om606 the same as Billy Ray bucking is to McCulloch. You can single handle increase the market value of this cars

[@mikoajradziemski475]

Im currently working abroad to afford one of these om 606 lol

[@MrAndrius12]

Lmfao they are cheap as hell here. The injection pumps however are a different story, they're where your money will be spent mostly (and a fresh turbo if you're planning on getting a new one instead of a second hand one).

[@dondezeeuw4940]

I found a first owner E300diesel om606 whit out turbo but whit manual gearbox thats better for tuning whrite?

[@W201029]

Do anybody know, how strong the 722.6 in the 606 210 is? Its the smaler version 722.6 W5A330 whats means torque limit 330NM (243ft lb).

[@ethicalelectricalgroupltd3153]

Anyone know where I get a Sean Tracey ecu from… tried search engine and can not find anything!?

[@cwillatts]

I have a used 606 socketed immo off ECU of seans for sale. drop me a message

[@osmelcarrillo5231]

How can I delete my egr without going into limp mode in these cars. I have a 98 e300td

[@dbguda]

I have an 1997 e300d Could I ship my ECU out to you guys and have it tuned?

[@travisjalbert1542]

Put an om606 in a Cherokee or Comanche and make engine mounts to sell

[@mherziarescatie]

Use a 617A.

[@Snailmailtrucker]

Thanks, I recently got myself a beautiful 1998 E300D that had a turbo fault readout...turned out to be the Turbocharger Pressure Converter that I replaced for $20.00 on Ebay...friggin runs great now ! I originally bought the car as a donor to swap the engine into my 1982 Chevy Cube van that I made into an RV. But everything in the car works as it should and it's a Beauty and is way too nice to canabalize ! Damn ! I got a killer buy on it too !

[@jaktheapprentice1023]

Sick. Im gonna do one on a 94 chevy g20 down the road.

[@LeftHandPianoMan]

Would the piggyback ecu work on a 2005 Mercedes e320 cdi’s i6?

[@cocopublicnews6766]

I'm dreaming about swapping in the drive train from my 98 e300td in my 49 pontiac but they are just both great cars how they are the pontiac isnt running but has numbers matching straight 6

[@bongzonthebeat]

I wish HP tuners linked with the OM606

[@adriandryblak4539]

Can You let us know when Piggy will be up for sale? Seems like no one can find it on the web. Maybe you can put a link in the Bio. Cheers

[@seanmcalum9238]

Its on the dieselpumpuk website now.

[@AR02LWT]

@@seanmcalum9238 can you add a link please? I can’t find it

[@seanmcalum9238]

@@AR02LWT I would email them directly. I looked awhile back and didn't see it either.

[@bruettingmarcus]

Can this be done to the w140 s300td? OM606.961

[@MatthewDannevik]

what about a customer controler for 722.6?, ever try one?

[@whatyoumean3383]

So all i need is to just swap that ECU on my w210? I mean i dont need to tune it? Is that allready tuned ecu ?

[@-smp-scientificmethodpersp838]

Finally! So awesome you did a dyno test at the wheel

[@stumo8681]

Why does it matter? Americans have such a bee on their bonnet about horsepower at the wheel. When everyone else in the world uses power at the crank

[@nathanchalecki4842]

@@stumo8681 because power at the engine is open to interpretation

[@stumo8681]

@@nathanchalecki4842 not its not, its power developed by the engine.

[@nathanchalecki4842]

@@stumo8681 duuuuur. The problem is that the dyno measures power at the wheels and many dynos need a correction factor entered to figure out the engine power. People can and do enter silly drive train loss numbers so their engine hp appears high.

[@stumo8681]

@@nathanchalecki4842 a decent dyno and operator will do a coast down transmission drag measurement rather than guessing.

[@jamielee2778]

Mint gains, is the car auto? Does the box handle the first piggyback on the stock engine okay?

[@zachscars1596]

Thanks for this great video!

[@samemerzidis3810]

Get the camera very close so we can see,plus check the microphone cannot hear you

[@marksam6824]

I am buying a Nissan Patrol With broken diesel engine I would like to fit a OM 606 to it and it is a 5 speed manual

[@verossavr3027]

Bad idea, bought engine from patrol

[@fiquifiqui]

Anything for the OM622 5 cylinder?

[@user-iq2jd8bd5c]

Absolutely love this, super presentation! Can't quite make my mind up what to do with mine. Would like more power / torque at lower revs for better acceleration. 🤔🤔 (Still awaiting reply from emails ??).

[@oliverlock7160]

Thats one quiet 300d

[@ragnarlothbrok6324]

I love your videos, this is my favorite channel. I wish you posted more.

[@Dallas-GTR-86]

Is there a difference between e300td and e320cdi 2002? I have c250td is that any good on gains?

[@r.fumador1146]

e300 and e320 and total diferent engines

[@fuerteventuramobilityscoot6530]

With the stage two upgrade ecu. Do you still physically have to block off the Egr valve. For it to work properly . Or can you just leave it standard looking....

[@seanyt121]

You can remove or keep it. Buts operation is disabled.

[@fuerteventuramobilityscoot6530]

@@seanyt121 Thanks Sean. Still looking for a w210 here in Fuerteventura. Lack of work here over the last 10 months as stop me buying one. Can’t now even island hop at the moment . Because of the virus. When I do buy one. I’ll be in touch...

[@seanmcalum9238]

@@seanyt121 do you have contact information or is it just with dieselpumpuk?

[@seanyt121]

@@seanmcalum9238 most people contact me through Facebook or Instagram.

[@seanmcalum9238]

@@seanyt121 thank you. I looked on fb and didn't see you.

[@fintrenery2439]

im so glad you came out with this, been waiting you to do this !

[@Merc-Rover]

I'm considering buying a 1998 E300 estate with 120k miles. What areas should I be concerned about?

[@Merc-Rover]

There has been a slight change of plan... I'm picking up a Discovery 2 that has a OM606 engine fitted.

[@vincentpoole7588]

DPUK. So would it be reasonable to upgrade the puffmatic to the 5HP30 ? I understand the ZF auto gearbox is softly shifting between ratios to protect it from overheating the fluid and or clutches ! V.

[@krisztiannemeth1001]

Maybe with ofgear ECU, better run.

[@abdullahz4804]

What's the max the 210 E320 cdi can get chipped to??

[@hausmeisterengineering5952]

now i want one of these ugly duckling benzes

[@mechtechmechanical1571]

great vids just a quick question do you do a breakout box for the Bosch vp44 cheers

[@r9cheverny433]

Can someone tell me what is the best way to tuning OM612?

[@eminmensimov9297]

Super master

[@brianoliveira4051]

Can ecu on 96 non turbo be changed for more power ?

[@TiranaTrading-hj5we]

Hi. Om 606 on a w211 is it possible?

[@DieselPumpUK]

Yes look at my black w211 in older videos

[@J.F.K.O]

the piggy back option sound a lot like the old envy mod for older TDI engines.

[@JohnSmith-qj4cf]

Can I buy a up grade pump from you is see your in England im in America California im sorry this is the new drug to me im hooked mate

[@DieselPumpUK]

Yes please email the shop

[@AbidmansurAdi]

How do i book my car in? E300td same lump obv

[@MrAradulescu]

Can you tune a P reg c250td too??

[@__Michal]

Wish we could collaborate a N.A franchise love your work

[@paulantbailey1277]

Great informative video Dale. Really answered some questions there.

[@timjodice100]

Where on your website can I find the piggyback tuner?

[@markdegroot9201]

I have a question.... Is it maybe an idea to suply a little breakout cable between the stock wiring and the ecu to make it even easier 🤔

[@CATPLAYING]

Do you guys do any work to bmw m51 "tds" engines?