Very nice. eurodyne should have released a 'how to' to use maestro and since there isn't much information on it I'm glad your making these vids. Thank bro, from Scotland.
@VdubInParadise5 жыл бұрын
Glen Williams Glad I could help. When I first got the program, I expected a lot of tutorials from Eurodyne but turns out there was so little. Goal is to get out as much information as possible for everyone, so they aren’t left wondering like I was.
@calebc60285 жыл бұрын
crap haha. United! here I come!
@VdubInParadise5 жыл бұрын
@@calebc6028 Hopefully in the future they'll be able to come up with an update..I would like to tune a VR6 myself.
@calebc60285 жыл бұрын
@@VdubInParadise For real! 440cc injector and 20 psi is not enough for me... i want at least 500whp
@PeterFeltersnatch8524 жыл бұрын
@@VdubInParadise excellent video... Quick question shouldn't you hook up a battery tender when flashing like all other tunes?
@reaper10airsoft922 жыл бұрын
do I need to change my throttle body to a non drive by wire or can i keep my stock drive by wire TB? I have a 1998 audi a4 b5 with a 1.8t a 5 speed manual and a drive by wire TB
@alejandrodibenedetto662 жыл бұрын
Is the VVT for emissions only? Improve power? Do you leave the VVT solenoid with 12v permanently? Advance intake cam 22 degrees. overlap mode
@bitcozy53272 жыл бұрын
Can I run a manual boost controller with the maestro software? I noticed during logs it was showing boost and I wasn’t sure if that was being read by the MAP sensor or something. Sorry a bit new to this
@davidbryantautomotive21275 жыл бұрын
Got a stage 2 apr 03 Passat b5.5 dope content been following the channel for along time .
@313m3n7075 жыл бұрын
dope video, inspired me to build my aeb passat. Great content my dude
@Continental7193 жыл бұрын
What do you do if your bungle is refusing to connect you to the Eurodyne maestro editor? Mines recently started doing it smh
@deezyb8584 жыл бұрын
Where do you set the octanes for the tunes? Eurodyne doesnt specify the base files octanes for the tunes.
@VdubInParadise4 жыл бұрын
When dealing with octanes, you mainly adjust timing to match the octane you're using. High octane or race gas allows you to run aggressive timing settings to increase horsepower. So you would have to do timing manually through the maps. There are 2 timing maps on eurodyne that they give you to use. "Pump Gas" and "Race Gas" timing. These are used to adjust timing for fuel octane.
@vdubmhana88585 жыл бұрын
Please keep the awesome content coming. However, I do wanna see you take Civics to McDonalds for a Mcgapple sandwich!
@vlMonster5 жыл бұрын
Mahalo from Puerto Rico can't wait to see the next video🙌🏼🔥
@NietVerantwoordelijkTV5 жыл бұрын
does this also work with an agu 1.8t?
@brianbaney23605 жыл бұрын
Awesome man i cant wait tell i can get this far on my car.
@DustySteel Жыл бұрын
Do you know how I would do a throttle body alignment/adaptation for the AEB DBC? I was already running the 440cc tune. My car was in an accident and sat for a few years. Any help would be much appreciated.
@VdubInParadise Жыл бұрын
You can do it through the measuring blocks, there’s the TB adaptation feature. Same process as vagcom which can be done on Eurodyne.
@DustySteel Жыл бұрын
@@VdubInParadise I just got a new laptop and I’m having a ton of problems with Eurodyne software. I was able to download the editor and the flasher but not the logger. I watched your video but wasn’t sure if you knew the particular steps for AEB.
@VdubInParadise Жыл бұрын
@@DustySteel Measuring blocks can be found in the menus of the Eurodyne flasher. Not too familiar if there’s extra steps with AEB since you may have to adjust the throttle stop.
@DustySteel Жыл бұрын
@@VdubInParadise okay, I’ll see why I can figure out. Thank you for your help and reply.
@nathanielfuggers3 жыл бұрын
trying to do throttlebody adaptation and as soon as i click basic settings it closes and nothing happens, anyone with the same problem?
@kalebbills50825 жыл бұрын
Mahalo from Washington. Love watching your builds can't wait till see you gapping them lawnmowers
@moises.cisterna5 жыл бұрын
could you please explain how to modify the pressure of the turbo, using the "Maestro editor ". From Chile
@VdubInParadise5 жыл бұрын
Moises Cisterna Definitely! I’ll be making a few vids on a lot of the maps in Maestro.
@kalebbills50825 жыл бұрын
#2 my Lord #2
@chriiss69363 жыл бұрын
Can u provide a link on where i can get this for my pc ?
@qcprodz34375 жыл бұрын
I was waiting for ittt From Quebec
@fullsend_auto54795 жыл бұрын
I cant wait for the tuning video man. Excited to see the gti running
@treyhornbrook89315 жыл бұрын
So I’m confused 800$ and u can tune multiple Ecus or 500$ just to tune 1 ?
@VdubInParadise5 жыл бұрын
Trey Hornbrook $800 is for buying and registering the physical cable and tuning for one car. If you want to tune another car using that same cable, you pay $500. $500 per ecu, but you need to have a registered cable
@treyhornbrook89315 жыл бұрын
VDub In Paradise so how do all these people tune so many ecus and sell them for 250$
@VdubInParadise5 жыл бұрын
@@treyhornbrook8931 Most likely they do not use Eurodyne Maestro, they use a different program. There's a couple of free software tuning programs such as WinOLS or TunerPro, but you need a lot of knowledge with coding of the ECU's. They are not easy to do off the bat since you need to start the tuning from scratch.
@meismike924 жыл бұрын
If you register the cable and tune one car can you get credits to tune a second car and go back and fourth between cars? Me and my buddy want to tune our cars and data log and retune. I got the cable coming in the mail so can he just load it up with credits and we can share the cable?
@AdamJohnson-di7co4 жыл бұрын
Awesome content ! Can you tell me about your steering wheel ? Is it stock ? I want to throw one on my New Beetle!
@VdubInParadise4 жыл бұрын
It is a MK4 steering wheel. Only found in the GLI and 337 or 20th GTI models.
@AdamJohnson-di7co4 жыл бұрын
VDub In Paradise thanks !
@frankprotokowicz57624 жыл бұрын
Thanks VDIP ! These are awesome!
@lilmangofast5 жыл бұрын
Much anticipated. Thank you.
@anapaulapereira32555 жыл бұрын
vw 19 pd tdi remap pless
@VdubInParadise5 жыл бұрын
Ana Paula Pereira unfortunately there aren’t tuning options from Eurodyne for the tdi
@shiftinggears98965 жыл бұрын
Very interesting bro 👍
@mikefoster41054 жыл бұрын
Watching this made up my mind I'm buying eurodyne!!! Tba is like $60 each time, it'll save me $$ in time... I don't really want a box tune anyways.... Haha you love how that auto Jetta smoked the s2k? lol too soon Jr!!!!!!!
@MFullaStyle5 жыл бұрын
Intros dope!!
@d.i.yautomotive22123 жыл бұрын
Can you flash my ECU ?
@tjbmx18834 жыл бұрын
Can’t seem to get my data logging to go through a full run, it always crashes the program before I’m done driving, any help anyone?
@jaydeezy014 жыл бұрын
Building a Big Turbo TT on my page. 🤔considering maestro
@brandonktm94 жыл бұрын
If your 1.8t is running at 14.7 under load it’s going to blow up.
@tylerj26554 жыл бұрын
Does this work on a stock ECU of a 01 Audi 1.8
@jakegatt40354 жыл бұрын
nothing happens whrn i try to do the throttle body alignment
@zuluagaco5 жыл бұрын
Dont you blow too many CV axles with so much power ?
@ShiestyF105 жыл бұрын
First comment was good mahalo from Cali
@Continental7194 жыл бұрын
My second box states 0.0% =(
@garrettivey1605 жыл бұрын
Does this also work for tdis?
@juanquinones25975 жыл бұрын
Mahalo to you from your Puerto Rican brother from Florida. Hey quick question maybe you can help? Listen 2005 gti 1.8t. No codes but goes into limp mode after full throttle pulls. Oh yeah the rotten egg smell to. Any ideas???
@VdubInParadise5 жыл бұрын
Juan Quinones what’s your exhaust setup? The egg smell sounds like a clogged catalytic converter. The decreased exhaust airflow from the clogging will choke up the engine especially when doing a big pull.
@juanquinones25975 жыл бұрын
Its looks like factory. It has good flow thou. That i verified.
@juanquinones25975 жыл бұрын
@@VdubInParadise it's factory. Has good flow i verified.
@juanquinones25975 жыл бұрын
@@VdubInParadiseyes guess it sound correct what you telling me. Gurss next step would be a bigger exhaust to see if it remedies the problem. Thank you. Hey great work with all your videos and how you explain to the masses on here😁👍👍
@calebc60285 жыл бұрын
So does this work with a 12v vr6?
@VdubInParadise5 жыл бұрын
Unfortunately there are no available base files for the Vr6 engines.
@Crypto_Chino5 жыл бұрын
You dont have Instagram ?
@VdubInParadise5 жыл бұрын
IG: Dubwot 🤙
@Crypto_Chino5 жыл бұрын
@@VdubInParadise Awesome i followed, ty !
@nahnahxl5 жыл бұрын
@@VdubInParadise you got my follow. one of the most informative youtuber. easy to understand. thanks!