Turbo 350 Aluminum Deep Trans Pan & AN Trans Cooler Fittings Install

[@harrelremmer1937]

was this recorded in a mirror ? everything is backwards

[@papergatorzfedducca7998]

New subscriber!!🔥🔥🔥

[@RodolfoRudee-RudeMorales]

Do you remove the trans adapters counter clockwise? I just ordered a new one for my Th350 tranny

[@NFL_VET89]

I used an fittings on my 700r4 with no tape pt paste and my trans leaks from the port. pulling headers tomorrow to fix that

[@304customsgarage]

Good to know before hand, thanks!

[@oliverlevy7586]

I am putting them in a th350 and can hardly thread them in

[@AZpatriot69.]

What cooler lines are you going to use?

[@304customsgarage]

6AN stainless braided is what I got for it

[@kern_yak_angler]

part number for the AN fittings?

[@304customsgarage]

Yes the ones I used are Russell # 640520

[@kern_yak_angler]

@@304customsgarage thank you do you happen to have a part number for the fittings that go into the trans before the black fittings?

[@304customsgarage]

I do not unfortunately, the only thing I changed out was the stock style fitting to the AN fittings. They're 1/4" to 6AN.

[@mystyical5222]

what -6 adapter screws in the radiator.

[@304customsgarage]

I have an external cooler for the trans I'll be using for it instead of the radiator.

[@mystyical5222]

@@304customsgarage ok can i use an adapter and run it to my radiator instead?

[@304customsgarage]

They might make some kind of adapter(s) to run it to the radiator but I'm not for certain.

[@UziMovie]

​@@mystyical5222did you figure it out?

[@mystyical5222]

@@UziMovie yeah my radiator has a trans cooler built in and i just ran it in and out of it and it does the job. it’s like m12-1.25 on my corvette s10 swap radiator.

[@brianvalentine4815]

Are those quarter inch to 6 AN fittings ?

[@304customsgarage]

Yes 1/4 to 6AN

[@berndrocket517]

Important !!! NPSM Thread!!!

[@UziMovie]

Would it be the same for a th400?

[@daledoll2321]

Has anyone take notice it Supposed to be semi turbo 350 transmission but the dipstick tube is on the wrong side of the transmission I’m gonna go to tighten everything down he turns it Counter clockwise to tighten what’s the old saying righty tidy lefty Lucy

[@oldmanintheshopbuiltnotbou8726]

louvered tranny pan ought to stay cooler

[@Dboyquicks10]

Lost interest in your video. Couldn't hear you talk then music was to loud.