Turbo TD42 Nissan Patrol First Run! | How fast is it?! | IS IT WORTH TURBOCHARGING YOUR OLD 4x4?

[@scotterx9835]

Loving the real Aussie, real budget, real life 4WD experience for the everyday worker. Had to get a hoodie to support. Well done boys, keep it up.

[@35wheels]

Good job boys. Just one thing you should really use the steel gasket from the turbo gus on the manifold those gasket yous got will blow out eventually

[@bogged2theeyeballs695]

100% correct. Need steel to survive the heat. I'll give the gasket used maybe one or two weeks.

[@Cailean750]

Yep this needs to be pinned. They’re not gonna last

[@masondegaulle5731]

Good to see you fellas having a go and doing it (mostly) right. Get her fuelled right and you'll have 2 x torque over factory at least, much more economical on highways too. TD42 is a great motor, treat it right and you'll get another few hundred thousand clicks out of her.

[@frednurks8528]

Another great video fellas.....awesome. Just on the manifold nuts- I think they may just be copper plated. Pure copper nuts would not normally be used in high stress applications but I’ll stand corrected. Using a magnet on the nuts should confirm that. The copper also would provide an anti seize property....no need for antiseize compounds.

[@reecebartlett1977]

Good to have a channel that has sum patrols Keep up the good work

[@jase6827]

So good seeing this channel explode. You tube channels done right

[@captainawesome3816]

Good job lads. Did the same fitment of a turbo on mine years ago using parts from all over. Brought back memories watching you guys do it :p Had a chuckle with that oil feed elbow leaking as I had the same problem when testing haha.

[@willemmatthews676]

Being sussing out those jrp multi guages for a while now, keen to see the install

[@russell1359]

Got my sticker the other day guys , loving the videos , fast becoming my fav channel !

[@karl4834]

Had to do the same job with an exhaust stud on a 1KZ-TE a little while ago and used the same right-angle chuck to get buggered one out. Why is it ALWAYS the one in the worst position that is the broken one 🤔😄 Awesome to see you having a crack with turbo-ing the Patrol and was stoked to see it run after 👍👍👍

[@nasssshdaewg2362]

Kids a full blown mechanic 👨‍🔧

[@michaelreis7010]

I've got two wagons 1 turbo which I've just put an intercooler on and doing the brakes and 1 NA which is a project waiting to happen , your gonna love the extra oomph it's got when you need it. Time to see you guys in action again!

[@bjones5240]

@liam, 8:14... its not about the overall ID of the piping. it more to do with the restriction on the air as it flows through the piping. the way you have a gradual reduction is great. it would be wrong to say "just because the turbo inlet is 2", the 3" inlet at the airbox is useless". If you want some further reading seek out "reducer k value" for some info. Nice work. We dont agree on the gasket bit either. you should put a smear of goo on the gasket to ensure it will seal. especially on older second hand manifold because they have been heat cycled they are more like to have small surface imperfection which the goo would help to seal on.

[@mickmay6569]

Theres always one ..hey boys !!!!

[@bjones5240]

@@mickmay6569 doing things right mate...im sure you another DumBFuCk Patrol owner... its ok

[@maxl3189]

@@bjones5240 God made patrols to keep retards out landcruisers haha Sometimes it's not worth the hassle trying to help people

[@mra9xss]

Making “hand sanitiser” in the background….. nice! Lol

[@Freedeeism]

Was looking for that comment😁

[@jacksoncorcoran7696]

Good to see a coupla local blokes doin well on the tubes, keep up the good work fellas 👍

[@dondeestalaleche4054]

Great job with the merch guys. Wish I could get some

[@82acresfarm]

Heavy diesels use a pressurised tank to feed oil back through the turbo when you shut the engine off I know a guy in Perth that has one fitted to his Jackaroo guy is a legend and his Jackaroo is pretty impressive.

[@astol87]

Keep it up lads! Loving watching the channel!

[@matthewtunbridge1808]

Is it even turboed if you don't get pen and put a T on the 42D sticker

[@riotousftp8582]

TD42 is the name of the motor, it doesn't stand for Turbo Diesel 4.2. Just like the ZD30, and RD28, they are just names of the engine, cause both of those motors are turbo diesel, but aren't called TD30 or TD28

[@matthewtunbridge1808]

@@riotousftp8582 guess we've never heard of sarcasm

[@riotousftp8582]

@@matthewtunbridge1808 more of a joke then sarcasm, I had a good laugh over it I was just telling you that that’s not what it means, your comment was funny

[@grimreaper6112]

@@riotousftp8582 you should tea bag a turbo at full noise.

[@ridiculousthings4x4]

10:25 You might end up with a rocker cover leak if you've got the rubber washers on top of that hose bracket. Jussayin'

[@sledstorm4703]

Reasonable build for the ordinary man. Great video

[@TK-fc1dm]

Hello from the US. I ordered a shirt from you guys and paid more for shipping haha. Love the content keep it up! Yota>Nissan

[@aaronmitchell2619]

Man I’m literally doing this in hopefully next couple months this really helped honestly thanks

[@ToyotaRobb]

Turbo spool smile, love it. Cheers from the states love the vids.

[@madcat4563]

Congrats on your TDed NA patrol. 😱😀 Can't wait to see more videos about it. 😁

[@assassins4904044324]

My turbo is a high flow turbo and I had to run a 4inch airbox and 4inch snorkel and 4inch pipes to 2.5inch turbo intake cause it didn’t get enough air thru a 3inch pipes

[@adamgraham1080]

Keep an eye on the silicone joiners on a intake, they can suck in as they don't have a metal wire inside them keeping it open under acceleration

[@Jensonsnotdone]

Awesome to see a turbo being done on the channel! Been thinking of doing the same so this is a great resource for myself! Am wondering if that na pipe between the air boxes hasn’t got any cracks in it? Mines a bit worse for wear haha. Great vid 🤙

[@francisreichelt254]

The water line from the thermostat housing to the turbo, the mounting tabs don’t bolt to the rocker cover they bolt to the turbo manifold!

[@fredio54]

Nice Dawn vice - I have a vintage one of those, 55kg, crazy heavy.

[@jonnewton5929]

Great work mate. Hope it all works out well for you. Great work on the knowledge of your job too. Cheers guys

[@bluntobject4084]

Very keen to see how those gauges work. nearly bought them my self a while ago when doing my build up. Still keen and curious to see how they go

[@vincentdunne7197]

I did the bottom end bearings while the sump was off more for oil pressure reasons. They are cheap and if they are old and worn oil pressure will become an issue with more pressure from boost. Like your channel

[@benhopps5836]

0 dislikes.. Goes to show how good this stuff is! Good work fellas

[@maximilianb.8418]

Yt doesn't show the number of dislikes anymore. 😉😂 But, great video of course.

[@chabssperformance1442]

Keep up the Good Content Lads Good stuff!

[@geoffbell166]

What a pleasure to work on,could do it anywhere with basic tools,try that with new Nissan diesels with a wiring loom the size of a python!

[@downtheshedwithbyron]

1 of the best upgrades you'll do mate

[@downtheshedwithbyron]

I brought a 3"gu exhaust system off ebay for $400 and only had to mod a bracket or 2 if that helps mate

[@toms_gupooe]

Those factory gu airboxs suck absolute dick at sealing at the lid, don’t count on it if your stuck in a deep river, I’d be looking at a aftermarket one mate

[@PaddyBoy644]

Bit of a tip for people who are just getting into cars make sure you use the correct hose for the purpose, there are different hoses for oil, water, fuel lines low or high pressure, in tank fuel line and extenal use fuel lines and so on. Great video as always boys 👍🏻

[@AussieArvos]

Thanks Paddy! great advice!

[@alisonphilp7497]

Love it also just ordered a shirt and a sticker of course lol cheers guys

[@NLJ1953]

Awesome vid boys took me back to my youth. Boomer Jones

[@Zachatar]

hey mate just found your vid welcome to the turbo life i was wondering what the mirrors are like on your ute was looking at getting some also cheers

[@timsaveneh567]

@aussie arvos, keen to get some input on the mirrors aswell. Did you guys do a vid on it at all?

[@AussieArvos]

Hi Guys, yeah we did do a video on them kzbin.info/www/bejne/a57OoZaIhK2ofpo

[@marcosarria2984]

Keep posted on the fuel part. I've always wanted to do this, everything you did is easy IMO but the part that I don't understand is how fuel tunning is done on the TD42. Thx for video!

[@petergill8819]

Looking good, I hope you use the oil resistant hose on the oil return to the sump Utara, otherwise I have seen none oil resistant hose go to shit

[@cooperhoughton5789]

I definitely saw Patrick at the Grampians

[@bingobango4892]

Grouse vid. Loved the brazing part. Just remember to always keep a hand on the steering wheel.

[@joelphillips6697]

Water cooling a turbo will be an extra load on the cooling system. However, pumping oil through a turbo will also increase load on the oil system/temps….. pretty much 1 for 1…. It’s either the oil system by itself absorbing the heat, or the oil and cooling system absorbing the heat. Distributing the load between the 2. I’d prefer to keep water cooling if it’s accommodated for in the turbo.

[@joep8312]

Wow$ 58.70 to ship a t-shirt to the USA nice video guys

[@RingoTravels]

Great content lads. Subscribed!

[@jordansmith8003]

Wicked ,can’t wait to turbo my gq

[@geeransfield1007]

Good work young fella 👌

[@alexrobinson2825]

Congrats on the build boys. i was just wonderin how much roughly this cost as i was thinking about swapping a turbo onto my TD42.

[@rob45x]

Great progress on the beast. Maybe install one of those boost/egt gauges in one. Maybe a redarc branded item??

[@Chuckles1418]

Awesome job guys! - Suggest you and the boys cut your hoodie strings as there is nothing worse than having your face pulled into a fan.

[@jayarre1839]

good cheap turbo, don’t go over 12-14psi with them cause they’re a hairdryer but definitely a grouse step from na. @16:54 was the oil in the coolant?

[@jonesy1130]

nah mate just bubbles and some little bits and pieces hahaha

[@jayarre1839]

@@jonesy1130 good stuff then, i remember changing my coolant once and thought there was oil in it. biggest shit my pants moment 🥲

[@JP_built7916]

Where did you route your engine breather hose?

[@22MrHayden]

Sounds sooo good ill tinker around with my 60 then come inside watch one of your vids and want to get back outside and keep doing stuff to mine hahah

[@edstafford4511]

I did the same exercise with a dts system on an identical ute, I loved it! The reason I love your channel cause you do similar stuff to me and my mates! Legends 👏👏

[@3l340]

Привет, ТНВД и форсунки менял от TD42T?

[@dodgydave5854]

Great job boys

[@noiseyboy2h4jj1]

Please make a 3 inch side pipe. They sound too good to run it out the back.

[@jamesmclennan3618]

Keen two see what the next few steps do to it

[@Kobeeziedas]

Hey boys where’d you get the right angle drill adaptor from?

[@kobybryce7047]

Definitely need it tuned

[@arturobayangos1223]

Beli beli gud ! Talented !

[@NippyMoto]

So what the plan with Liam and this Partrol is he planning to keep it long term etc?

[@ryanchandler37]

Can you post the price list of it all, just curious what it cost you all to do this, love the vids boys 🔥

[@thebuilder4479]

When’s the merch coming?

[@target_finder4318]

We only watch this channel for liam

[@buildrestorefix]

Have you guys ever turboed a mazda r2 2.2 diesel ?

[@zacareereynolds7280]

Do any of yous know how hard it to turbo a factory non turbo 2h landcruiser looking at one and wkndering if it even worth doing

[@warrencramer4516]

I believe it's really worthwhile and actually runs better as a turbo than not. Refer to "Berrima Diesel" videos on KZbin.

[@timotheedoualle1718]

Will you do a review on the supernova spotties ?

[@jakeadams7473]

Where are the weather shields on the windows from

[@joshfrye7951]

You should put in a top mount intercooler

[@williamjohn4647]

Might wanna run a front mount. Just speaking from experience x great video tho

[@masoncarney8780]

How many kms does the patrol have on the clock

[@melnickharris1177]

Only thing with the silver top td42 they don't have oil squirters for the pistons and bores

[@cameronembrey2389]

Really? I thought all TDs did

[@melnickharris1177]

@@cameronembrey2389 no black top yes non turbo silver top no

[@cameronembrey2389]

@@melnickharris1177 but they're still considered the second best for boosting ?

[@Zobby447]

Take it to Turbo Enginerring in thomastown for a tune mate don’t do it yourself. A professional safe tune she will last forever

[@moseswaring7385]

Sounds sick

[@mekobrescianini9657]

Job well done 🤘

[@DeejayManii]

how did you tune for the turbo?

[@jacobhamilton7030]

Coil swap coming soon?????

[@truetierra]

Nice one gents!

[@mechanicalmoron2251]

hay when are you guyes going to drive ye old racing tipper to the pub the video has got more than 1k likes now

[@midas8729]

It sounds better than mine 1hdt

[@ashtynfinch7443]

What size is this turbo?

[@22MrHayden]

Noo dont end it before tues i want some merch

[@two_stroke_or_broke9297]

My wife 8:27

[@maxl3189]

Lol

[@millerbreslin8657]

What psi is he running anyone know

[@ordinarypanda3613]

Awesome stuff can't wait to get my first 4wd. Only runnin a Holden cruze 🤣 planning on getting a navara lol

[@porky3384]

Where it like tapered down maybe!

[@ashsimons8481]

Fuck yes boys!!!!!

[@jarrod1687]

Needs a pump now. Sounds tough as

[@beanfrankednow5391]

Mad!

[@darrenc4096]

Turbo = 😃

[@joshuap4339]

Best content

[@AussieArvos]

Cheers Josh!

[@megabassbennylippo3760]

Insert forehead slap here for those gaskets 🥴🥴🥴🥴

[@neilodonnell4072]

Not bad guys

[@swishswish386]

Excellent 👍👍👍

[@edenschreiber2910]

Ok why’s there 8 ads on this video