Tutorial: Boeing 747-400 Startup from Cold & Dark! [iFly 747-400 V2]

[@AviationPro]

Thanks for watching! 👉 Click here for a more recent and updated version of my Boeing 747 Startup Tutorial, now using the PMDG Boeing 747-400 in Prepar3D V4! kzbin.info/www/bejne/n2ezoGyPZtd8Z9U 👉 If you appreciated this video, please consider becoming my patron! More info: patreon.com/AviationPro 👉 Check out this AWESOME VATSIM Multi Crew Flight flying from Manchester to Frankfurt!! kzbin.info/www/bejne/roqqfHeId8l0mbs

[@droneshotsantoine1805]

Ben je Nederlands?

[@Nightowl_IT]

Could you've started the APU after the battery instead of using ground power? And how would that work?

[@ashwinc3394]

Pls help my default b747-400 turn rightward automatically after takeoff.

[@Morgow1]

I like that he explains the function of the different configurations. I've seen so many videos where they just tell you stuff but give no explanation to what it does or affects the aircraft.

[@1nollie61]

Does anyone else get really relaxed watching such start up’s, or is it just me? 😂 ✈️

[@tuckerthenpc4573]

I love watching/doing startups!

[@halon7476]

Thanks for the tutorial...now my next step is to buy a 747.

[@AviationPro]

You're welcome, good luck!

[@rickerair5441]

you go rich brother

[@mrspud8869]

Find one on Craigslist

[@fridasophia5356]

You ever buy one??

[@kevcom000]

I mean it’s not like they are ever really locked on the tarmac or need a key ya know...

[@subsonicflighttraining]

Enjoyed the video, just an important correction, if you were in the real jet or simulator, when you do the Before Start procedure, and you have clearance to pressurize hydraulics from the ground crew, the FO would put #4 Hydraulic Demand Pump to AUX first, and then HYD Demand Pump 1 to AUTO (or AUX if the jet has it) and #2 and 3 to Auto. Doing it in this order pressurizes the normal brake system first and prevents a fluid transfer between systems. Normal Brakes are on system 4, with Alternate Brakes on 1 or 2 systems, so if you pressurize 1 first, the transfer valve will shuttle over and when 4 is pressurized, you could get a transfer of fluid between systems.

[@alorbrothers9096]

thx for the advice

[@jakobhermann6475]

Thank You so much for this Video. You talk slow and clear, easy to understand. Very well done.

[@AviationPro]

Thank you, you're welcome! :)

[@taharbenseddik3114]

A very interesting video on the cockpit of the Boeing 747-400, the start up aspect. I can watch these kind of video's for hours without getting bored for a single moment. Thank you very much !!

[@AviationPro]

Good to hear, thanks for watching! :)

[@kimanygregoire4899]

Great Video. I was able to carry out my very 1st flight on flight sim with the help of this video and my friend who is a qualified FO on the 767 for DHL. He was very impressed. Keep up the hard work

[@elnidogaming]

Thank you very much AviationPro for taking the time in making this detailed tutorial. I believe you're the only person who has made a video this way for the iFly 747 400. I want to let you know that I appreciate the time and effort you put into making this and other videos, as I'm sure your viewers do as well. In the future if I have other ideas on video tutorials, you will be my "go-to person" to get this done. Thanks again!

[@AviationPro]

El Nido I'm glad to hear all that, thanks for watching! :)

[@michaeldob7861]

Great video and tutorial. In my honest opinion, if you understand Boeing planes very well and your knowledge of aircraft systems in general is very good, and that you approach a plane in a very logical way, then you would definitely prepare the 747 for flight by yourself. BUT...following the procedures in the form of a pre-flight SOP is the best way to handle the 747. That's what you did good in this video. These planes are made to be operated realistically!

[@rajivpanicker5593]

Keep up the great work buddy, we support you here from Philippines. Thank you for the effort bro.

[@AviationPro]

Rajiv Panicker Thanks a lot! :)

[@БольшаяЛопата]

I am from Russia but I understood all words, all procedures. Thanks! 👍

[@AviationPro]

You're welcome! :)

[@spacedivinepeace1928]

cockpit looks so real, Very clear lesson.

[@AviationPro]

Thanks!

[@Ryuuu6581]

Could you make a video about the same thing, but for the Project Opensky B747-400 model or just the default FSX B747?

[@subsonicflighttraining]

The way the fuel system works during preflight is that the pilot checking the overhead panel (usually the FO) will ensure that all X-Feeds are OPEN and all Fuel Pump switches are OFF. During the Before Start procedure, the FO will turn all Fuel Pumps ON for the tanks containing usable fuel. So, if there is no fuel in the STAB and CTR tank, he would not turn these on. If the fuel in 2 is less than or equal to 1 or the fuel in tank 3 is less than or equal to tank 4, then you will see the TANK TO ENGINE message after turning the fuel pump switches, including the Overrides ON. At this point, we would check the Fuel Synoptic to verify it is truly tank to engine and then configure for tank to engine, which would be turning OFF Overrides 2 and 3 FWD and AFT fuel pumps, and closing X-Feeds 1 and 4. You had some question on this, so hopefully this clarifies it. Most of the time, there will be fuel in the Center Tank on the freighter and/or fuel in the Center and Stab tanks on a passenger jet since this jet is normally not doing short distance flights. But, on a ferry flight or some Asian carriers operate some short flights like between Taipei and Hong Kong, you may well have a light fuel load.

[@AviationPro]

@Miles Denning It is quite a heavy addon, so I'm not sure if you will get as much framerates as you do with the CS 757. However, they are working on a service pack which is said to improve the performance as well, so you might want to wait for that to see the results!

[@varunbalaji2524]

were I get this simulator can u able to send the url to download

[@AviationPro]

You need to buy microsoft flight simulator and then you can expand it by buying addons like this iFly 747-400 V2

[@georgebarlow3875]

+AviationPro where did you get the addon from? Thanks and great video :D

[@AviationPro]

Thanks! You can buy it over at flight1.com

[@mrcourier851]

+AviationPro Hey bro, does the IFLY747-400 work for fsx steam edition in 2016?

[@ronaldobrasi]

Thanks, good job. I do not know why the ground service to external energy doesn t appear. The parking break is on. Any idea?

[@adamlink2485]

hi aviation pro hope u well today i love ur videos i love this plane is amazing to fly and learn

[@edwardcody3736]

Another great video man, keep up the good work. I love your videos!!!

[@bobford01]

You might give a thought to checking the fire detection and suppression before starting the engines or the APU so it you have a start malfunction or fire, you know you can see it and do something about it. Everything I've flown so far does that... When I check out on the 747, I expect it to be the same.

[@casaamaril]

Very nice tutorial-well explained. A beautifully modeled flightdeck I must say, however I am still waiting for the PMDG 747-400 V3 as I expect it will have less impact on the FPS. Looking forward to flying the 747-400 again, it adds an extra dimension to flight simulation.

[@AviationPro]

Thank you! Yes me too, especially since I'm now using Prepar3D, the beta PMDG 747 V3 looks really nice! :)

[@ricardosc57]

Thank you for a very CLEAR explanation of this critical stage of the ground procedure of this aircraft. THX = 7-Stars

[@AviationPro]

You're welcome!

[@subsonicflighttraining]

Nice video, just a clarification for your own knowledge. The Safety Check, or Electrical Power-Up procedure as Boeing calls it, is a read and do supplemental procedure procedure which turns the Battery ON, Standby Power to AUTO, Hydraulic Demand Pumps OFF, Windshield Wipers OFF, Landing Gear Lever DOWN, Alternate Flaps OFF, and the Flap Lever and Flap Indication Agree. The Bus Tie Switches AUTO, then AC power can be established with EXT or APU power. In actual line operations, it is rare to do this since the jet is usually powered up and at the jetway by maintenance or by the previous crew's arrival. The safety check is designed so there are no surprises like leading edge or trailing edge flaps moving when they shouldn't, or wipers start running on a dry windshield and scratch it, etc. After power is established, then there is a preliminary preflight procedure, which brings the IRU's to NAV, checks STATUS page quantities, the logbook, CB's, Emergency Equipment, the Overhead Maintenance Panel, and the Parking Brake Set if brake wear indicator pins are checked. After this is the FMS-CDU Preflight and then after that is checking the overhead panel in a scan flow that goes from the overhead panel to the side panels, to the Forward Instrument Panel, to the Thrust Quadrant, to the Aisle Stand. Of course, the Captain and FO have specific duties of what they are checking and how they are checking it.

[@AviationPro]

Thank you! Thanks for your detailed explanation, I would have loved to cover all such detail in this tutorial, but this is just a basic startup ;)

[@JonathanChuter]

Great video! Typically a fire test would be done before the engine start, but other than that this video is perfect!

[@pokibeau]

Start Up - [ ] BATTERY switch (on) - [ ] STAND BY POWER knob (auto) - [ ] L-UTILITY-R switches (on) (2) - [ ] BUS TIE switches (on) (4) - [ ] GEN CONT switches (on) (4) - [ ] HYD ENGINE switches (on) (4) [not the knobs] - [ ] FMC position page - [ ] IRS panel switch (nav) (3) scratchpad last gps - [ ] FMC set IRS GPS position Lighting - [ ] All needed lighting knobs (on) - [ ] EMER LIGHTS knob (armed) Fuel - [ ] FUEL X FEED 1. 2. 3. 4 switches (on) Temperature - [ ] NACELLE ANTI ICE after ENG start up if needed - [ ] WINDOW HEAT switches (on) (2) - [ ] YAWL DAMPER switches (on) (2) Air Flow Systems - [ ] APU knob (start) - [ ] APU GEN 1. 2. switches [check for available] (on) - [ ] PASS TEMP knob (auto) - [ ] TRIM AIR switch (on) - [ ] UPR-RECIRC-LWR switches (on) (3) - [ ] AFT CARGO HT (on) [live cargo] - [ ] GASPER HUMID switches (on) (2) - [ ] PACKS>L ISLN/R ISLN switches (on) (2) - [ ] ENGINE BLEED switches (on) (4) - [ ] PACK>knob 1. (normal) Engine Start Up - [ ] HYD>PUMPS> knobs 1. 2. 3. (auto) knob 4. (aux) - [ ] FUEL X FEED switches (on) (16) - [ ] BEACON LIGHTS knob (on) before starting engine - [ ] PACK knob 1. (norm) - [ ] AUTOSTART switch (on) - [ ] START knob 3. 4. And fuel knob below (on) - [ ] START knob 1. 2. (on) check readings - [ ] HYD knob 4. on aux turn to (auto) - [ ] PACKS knob 2. 3. turn to (normal) - [ ] Remove parking brake

[@mohammedzulk8485]

Why didn’t Transat flight 236 get a fuel loss alarm when pilot forgot to turn off the cross feed?

[@DimitriPappas]

What does it mean if an engine only powers to 2.6 or 2.7 N1? I have refueled all fuel tanks and have all fuel pumps active, and APU running, but an engine shows an orange outline on the fuel status display and does not want to power up fully.. ? Is this a bug in FS2020 or is there something I should be doing to address this ?

[@johnnygwalker]

Excellent tutorial for the ifly. Awesome job.

[@AviationPro]

Thanks! :)

[@yumama3831]

At 0:46. How did you open the battery cover? I tried left click as well as right click. Nothing worked. Thus, I could never power up my plane.

[@a..c..2469]

I recently got interested in getting a flight simulator for my pc..just wanted to thank you for the video..its actually the reason i got interested

[@petraeva7698]

I have am running the PMDG 747 on Prepar3D V5 and I cannot assign any of the axis for reverse thrust and speed brake. Any tips. Personally, I prefer X-Plane, as much easier and am really a bit pissed off at myself for spending all that money because I cannot get my throttle and throttle quadrant running on P3D. But. nevertheless, great video and too bad I can't get it running.

[@A9966-s3i]

What keyboard commands bring up the FMC and MCP (mode control panel)? What program are you flying in? Xplane, FSX....

[@tylerstyles1043]

Very well explained and informational video thank u i really liked that it was just the systems involved in the startup and not the fmc to much because the fmc is a different world to understand . But is there any chance of u doing videos of the airbus a330

[@markcardwell]

SSFT has excellent training vids on 747-4, -8 fuel system as well as other systems. He’s a Captain and instructor on 747-4, -8 I’m pretty sure

[@MrPrateekpanda]

Hey Mate, its wonderful... But i have one prob. Everything in my flight works fine, until i takeoff. After takeoff, i receive following warning on ECAM.. 1. Auto-throttle Disc(Though mt A/T is armed) 2.Bleed Air 2 off, 3.Bleed Air 3 off, And gradually hell lots of such warnings. Fuel flow to ENG will stop, and my flight will stall... Any suggestions?

[@AviationPro]

MrPrateekpanda Thanks! You probably disconnected the autothrottle, it can be armed but still disconnected. And bleed air means you have not set the air conditioning properly. And all the other stuff, well, I don't know, it could also be a faulty installation of course!

[@MrPrateekpanda]

AviationPro Thank you so much....

[@ebinpaul9670]

Is there a way the 747 will be in cold and dark mode as you start the SIM?

[@MikeHack-h5v]

Thank you very much! I learned the procedure for the IFly 737 already from you and as I am planning to get the 747 for my first participation at CTP 2015, I am even happier that I can learn it from you as well. Thank you very much keep it on ;)

[@AviationPro]

Marco Hölscher I'm glad to hear that, you're welcome! :)

[@DutchRapLyrics66]

@@AviationPro Hey waar kan ik de ifly 737 procedure vinden, ik zie hem niet op jou kanaal

[@tf51d]

You're turning on too many systems prior to establishing external or APU power. You'll wear down the battery too fast that way. Also you should disconnect External power from Ground prior to start (Start is usually done during pushback on APU power)

[@AviationPro]

tf51d Yes I guess you mean the utility switches, actually they should have been turned on after external power was connected. As for the engine start, yes, normally ground power is disconnected and you use the APU to start the engines during pushback. Sometimes engines are started at the gate in case external air is needed due to an APU failure or problem, in that case ground power would still be connected as well.

[@Uncle-Duncan-Shack]

Very good vid, now me as piston engine flyer knows how the big bird with turbines works.

[@AviationPro]

+Palominostudio Haha, good to hear! :) Thanks for watching!

[@charliedrinkwater5656]

Very detailed tutorial liked it a lot

[@AviationPro]

Thank you! :)

[@WaelSoliman]

Great video I have a question , Why you did not select auto start both? and we need another video to evaluate the performance Thank's

[@AviationPro]

Wael Soliman Thanks! I think I actually completely forgot that switch and I'm not sure what it does, but apparently it works irregardless. And about that video, what do you mean exactly? About how it performs on the framerates?

[@WaelSoliman]

AviationPro No I don't mean the framerates but I mean how is the realistic in climb , descend and landing phases?

[@AviationPro]

I think very realistic, although I still need to test it more by making more flights myself ;)

[@szecseiotto5505]

Hi I have a flight simulator steam edition, but I don't have any buttons on it :( Why is that ?

[@milesdenning7408]

I have a quick question about my system specs and this aircraft. I was looking for a good 747 for FS2004 and this looks very superior to the PMDG 747. I was looking into getting it but see it requires some things I don't have, but I am able to run other products at 30-40 frames that require 3+ GHZ such as the Captain Sim 757-200. My specs are below: OS: Windows 7 64x Processor: Intel Core i5-2520M CPU @ 2.5 GHz Ram: 8GB Video Card (Heres where it comes down to.): Radeon HD 6470M

[@dot5609]

thank you, Stealing a 747 today😁 wish me

[@ibrasowe]

Very nice video!

[@kevinmencer3782]

No fire test on APU or engines before start?

[@chrisduden7382]

Fire control system check before start?

[@FilmpowerNorway]

I don't have all the buttons in the cockpit avaliable to me. Is there some setting i need to change or do you use another version of x-plane than the home-use version?

[@AviationPro]

+FilmpowerNorway I'm not sure what you are talking about. This is Microsoft Flight Simulator 2004 with the iFly 747-400 V2 addon installed. This has nothing to do with X-plane ;)

[@nuothe11th]

5:20 - You definitely do not want to turn on those guarded switches - those are for fuel jettison only and that is why they are guarded. You also do not need to crossfeed unless the inboard L/R tanks have more fuel than the outboard L/R, this is to ensure balance between each side and that engines #1 and #4 do not get fed empty tanks when the inboard tanks still have fuel.

[@nuothe11th]

again at 10:35, the OVRD fuel pumps are not required - with the jettison feeds on you are now spraying fuel all over the tarmac :P

[@AviationPro]

Thanks for the info! But the jettison feeds are not on, so I guess fuel will not be flowing all over the tarmac :P

[@szecseiotto5505]

Is there a mod that can be used to activate these?

[@ericdee1310]

I love these startup videos! Any plans to do the 747-8 anytime soon?

[@samdelacruz4895]

Great tutorial! I'm still torn between choosing the iFly or the PMDG although each have their advantages. I'm looking forward to your future videos! :)

[@AviationPro]

Thanks! Well, let's see what the pmdg 747 V2 brings, only then we can make a proper comparison ;) For now the iFly 747-400V2 is the best bet in my opinion, since the current pmdg 747 is pretty old already.

[@tanseiyang3163]

Make a video on how to use the FMS thanks!

[@vinay.a]

hey may i know which simulation game is this

[@A9966-s3i]

Is the FMC able to be updated to the most current AIRAC through Navigraph?

[@AviationPro]

Yes, using Navigraph airac data for example

[@sundevilification]

Nice work Thanks, from an Ex-Controller.

[@AviationPro]

+sundevilification You're welcome! :)

[@scottschenck6971]

Unfortunately, Aerofly FS 2 does not support engine shut down or start up. But if someday it does, this is a great tutorial video!

[@JeffSmith-ws3rz]

Hi. Could you please tell me where you found the KLM livery for the iFly 747-400 v2? Thanks

[@AviationPro]

You can find liveries at library.flight1.net

[@timhoppe2641]

Alweer een prima video, ik heb alleen een vraag: is er een kans dat u een video upload met een vlucht in de erj 135/145?Dat vind ik persoonlijk een heel tof vliegtuig, en het vereist een beetje andere skills omdat je geen VNAV hebt en geen auto throttle.

[@AviationPro]

Tim Hoppe Thanks! Klopt, het is een vliegtuig waar ik ook graag in vlieg, juist omdat je zelf echt wat meer moet vliegen in plaats van alleen maar autopilot, dus misschien ga ik hem wel gebruiken voor de volgende VATSIM video. Eerst nog eentje met een 737 binnenkort ;)

[@athan6390]

Awesome video, thanks a lot!!! Keep up the good work!

[@AviationPro]

Thanks! :)

[@christianemu1969]

Thank you ! Excited to see more 747 vids !

[@AviationPro]

Thanks, I'm sure more will follow! :)

[@lucienharbuck2258]

Excellent Video, Thank You! BTW....does the iFly B747-400 come equipped with the Boeing-Honeywell Uninterruptible Autopilot? TNX Again!

[@AviationPro]

Lucien Harbuck Thanks! I have no idea about that, I have never seen that system mentioned anywhere at iFly and I'm not even sure what it exactly is. ;)

[@Taipan11011]

Hello, do you have a video in your channel that exclusively shows how to program the FMC? Thanks!

[@AviationPro]

My new PMDG 747 tutorial includes FMC setup as well: kzbin.info/www/bejne/n2ezoGyPZtd8Z9U

[@Taipan11011]

Thanks a lot :)

[@membertotal4154]

My crts don't seem to start. Nor my FMC. Please help.

[@jlcm5981]

Hola a todos. Acabo de comprar el add-on 747-400 para flight simulator X, pero no puedo arrancar en modo cold & dark. ¿Me pueden ayudar?. Gracias

[@ati4280]

Good video for newbies like me

[@AviationPro]

+徐喆 Thanks! :)

[@stevepgaming1992]

What fmc is that u are using?

[@spicecraftmusics7618]

How did u get it in cold and dark state??

[@davidcampbell5255]

Great video. What flight simulator would you advise a novice to start with?

[@AviationPro]

Probably FSX Steam Edition :)

[@davidcampbell5255]

AviationPro Thank You:)

[@casanovaloveislife8218]

you will not do a fire test?

[@umairzakir5040]

I usually use active camera to look around the cockpit easily

[@nicolasnavarrete5538]

How I configure the stab , while in crz altitude the nose is very raised?

[@AviationPro]

+Nicolas Navarrete That shouldn't be happening. It is raised for about 3 degrees, but not a lot. Are you sure you are not flying too high for your weight?

[@xEcstasycz]

Hello, i have some questions, first I use 747 dafault by xplane10 and i cant use all buttons on overpanel for example, and how can i download these aircraft? thank youuu!

[@AviationPro]

+cesar henrique This is an addon aircraft for FS2004, FSX and Prepar3D. You can buy it over at www.flight1.com

[@jNS278]

hi, how long are the manuals of this bird? are they detailed or similiar to the ifly737 one?

[@AviationPro]

+jNS278 Yes, they are utterly detailed. You'll need a couple of weeks to get through all of it ;)

[@dutchnlgamer85]

Hi, ik heb je tutorial gevolg en alles ging goed tot ik in de vlucht zat hij gaf aan op mn ECAM display Cabin altitude hoe kan ik dit fixen ?

[@AviationPro]

+ikbenmichel112 FMC goed programmeren, anders weet het vliegtuig niet hoe hij de cabine druk moet regelen ;)

[@adarpolachek5580]

How can i create a Co route? I know how to load one but how do i add another one to the Co routes bar.

[@AviationPro]

I have not done that yet in this aircraft. I'm sure there must be some information about this in the manual?

[@proplane112]

How do you have the fuel in KGS, I have it in LBS and I can't change it?

[@AviationPro]

You can set that in the general flight simulator settings which system to use. Also, within the iFly configuration tool you can set that.

[@kannagi5070]

Where did you get the livery for ifly747? so hard to find...

[@AviationPro]

+COD700 From the Flight1 File Library: library.flight1.net

[@friedchicken1]

what mod to have all the buttons and switches to work?

[@AviationPro]

It's not a mod, it's a payware addon. You can buy payware addons at simmarket.com or flight1.com for example.

[@friedchicken1]

thanx dudox :D

[@nukething462]

every time i press the ground power button thesim freezes and crash. Please help!

[@shahabmaleki4436]

I installed this game now. How can i have 747 with klm or other airlines livery?

[@fulcrum_9162]

Where can I buy this with sales?

[@GVM-Pixy]

this works at xplane 10 (android) as well ?

[@fodaxxi61]

where did you get the KLM livery? because i only have BAW and Virgin

[@AviationPro]

+Sergiy Talko You can download liveries over at library.flight1.net

[@bandora11]

Well, all you have to do is turn fuel pump 1, 2, 3 and 4 on xfeed 1 and 4 if you have less than 50KGs x1000 of fuel, turn then all except the stabs when you have more than 59l0 KGs of fuel

[@dannyyasinskiy]

There is a person taking when i load in my 747 how do i turn that voice of that is telling me the airport and the weather? sorry im a beginner

[@AviationPro]

It's the ATIS, tune a different frequency in the COMM radios.

[@arthurchristmas4112]

Hey Aviation Pro! What flight simulator is this? I use X plane 10 and can't get to some of the buttons which annoys me.

[@AviationPro]

Hi! This is FS2004, although I am currenlty using Prepar3D. If you want to have advanced aircraft like this one, you need to buy addons. For example, you can buy the IXEG 737CL for X-plane. The addon you see here is the iFly 747-400. Usually, the default aircraft are not very advanced and only a few buttons are modeled.

[@arthurchristmas4112]

Thnx!

[@Anfasahamad]

Which flight is this?

[@yuri12889]

What texture are you using in this video?

[@AviationPro]

A KLM texture from the Flight1 File Library.

[@thesalahster1124]

Nice vid man, btw what liveries does the iFly 747 come with

[@AviationPro]

Thanks! Only default I believe, but you can download lots of liveries at library.flight1.net

[@karmagamersnl6081]

hey AviationPro ik heb een paar vraagjes/ opmerkingen 1. gebruik jij ENB? zo ja welke gebruik jij? 2. welke addons vind jij je flightsimulator echter lijken qua texture van ground en plane? 3. nice vid!

[@AviationPro]

1, nee! 2, plane verschilt per plane addon natuurlijk, maar in het algemeen geven Real Environment Xtreme en Ultimate Terrain de beste resultaten. 3, thanks! :D

[@ikbenkubi]

Awesome vid! My question is: my FPS in this aircraft is very low, and pmdg 737 is just good, do u know why my fps is low on the ifly and not with the pmdg 737?

[@AviationPro]

kubilay k Thanks! I'm not sure, because I don't use FSX. Fact is that the virtual cockpit is very detailed and you will probably need to do some extra tweaking. For example, I'm always locking the frames at 30 fps when flying this 747, while with other aircraft I have it locked at 60 fps. Locking it at 30fps gives me a smoother flying experience without lags, otherwise the PC struggles to get to 60 fps.

[@ikbenkubi]

aviationpro thnx for replying ill check maybe sonething for tweaking this

[@AviationPro]

You're welcome ;)

[@Bandit-Darville]

First time Flightgear i ran the Cesna off the runway, second time i actually got it to fly a good bit; the hell with it, i wanna fly a 747 and ... DAMN.

[@MikeHack-h5v]

Please help :( How did you get to work Active Camera together with the aircraft?

[@AviationPro]

+Marco Hölscher I fixed it by removing the so called "zorder" lines from the panel.cfg of this aircraft! ;)

[@MikeHack-h5v]

Ahhhh THANK YOU!! It worked :))))) CTP may come now!! :)

[@AviationPro]

Good to hear! :)

[@johanjansen6303]

Can you please make a video on how to install a ifly 747 livery ? thanks

[@AviationPro]

There's a good instruction manual about that which comes with the product.

[@Birdsfly11]

I figure a few more times at watching this I can fly lol...Thanks for the informative video.

[@AviationPro]

You're welcome :)

[@tomjhpage]

How do I install repaints for the 747 (BTW thanks for showing me the 747 I rly like it)

[@AviationPro]

You're welcome! You can install them via the configuration manager. There is more info about this in one of the manuals.

[@tomjhpage]

AviationPro Thanks!

[@zipzoo5940]

do you use fs2004 a century of flight? would it work on windows 8.1?

[@AviationPro]

zip zoo Yes, I think it would work, but I'm not sure whether complex addons like the iFly 747-400 will work properly on Windows 8. Let's hope that Windows 10 is a bit more friendly! :)

[@9v-skk71]

Are you using any camera addons?

[@AviationPro]

Yes, Active Camera for FS2004.

[@MrabEzreb]

How did you get the plane to work? It keeps giving me an out of memory error, even when I have 16GB of ram

[@AviationPro]

Out Of Memory errors have nothing to do with the amount of RAM you have. Flight Simulator is limited by the fact it can only use 4 GB of virtual memory (VAS). Addons using lots of VAS will cause the sim to reach an OOM error. Try to lower scenery settings and make sure your addon is up to date, because I know iFly has fixed VAS usage quite a bit in their last update.

[@MrabEzreb]

ok