Twist Drill Bit Sharpening Jig- From Dull to Sharp

#plywoodworking #Twistdrill #sharpeningdrill
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ 479435482886643
/ plywoodworking
You can learn how to easily sharpen drill bits using homemade drill bit sharpening jig from dull bit to sharp drill bit. This jig is very simple to make and sharpen various sizes of drill bits in few minutes. Here bench grinder is used to sharpen drill bits. you can setup angel for main base for harpen various sizes. A great addition to any bench grinder that does not already have one and costs much less than buying one.
this is really help me for working and I am very pleased with the results and would recommend making one yourself.
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheiros-Embrace

[@b.sulistomochannel657]

Mantep...master jig dunia perkayuan, sering lihat diyoutube, FB, IG, sangat menginspirasi Terimakasih ilmunya, semoga berkah dan tambah sukses om

[@plywoodworking]

maksih banyak mas supportya smoga bermnafaat

[@josuemendes7324]

Excelente !!!! Ajuda muito pois trabalhar com brocas sem corte e impossível!!!!

[@plywoodworking]

thank you very much!!

[@shahbazkh2885]

Very nice 🖒☺thank you

[@plywoodworking]

super thank you !!!

[@user-iw1zp5sc3s]

Спасибо большое!!!!

[@plywoodworking]

Awesome! Thank you!

[@ubiratanoliveira692]

Onde será que ele arranja tanta criatividade! Que Deus lhe conserve assim... ou melhor!

[@plywoodworking]

I glad you like the video, thank you very much for all support

[@diegokha5812]

Dios no existe. Es una fantasia

[@medo4721]

Very good

[@plywoodworking]

thank you very much!!

[@andybaker2443]

Excellent as ever

[@plywoodworking]

thank you

[@hurriyetsusuzlu9052]

herşey çok güzel.

[@plywoodworking]

Awesome! Thank you!

[@dingo3718]

That is cool,,,,top job man

[@plywoodworking]

thank you very much

[@aferetis2379]

great video!

[@plywoodworking]

Glad you enjoyed it

[@hermannkaimann9525]

Question, using the grinder wont afect un the diameter of the bit??

[@plywoodworking]

not if for diameter still same if use bench grinder, only have little change for angel for small drill change on 11-12 degree for 7-13mm around 14 degree

[@hermannkaimann9525]

Amazing, love your videos!!

[@shabranideadstone7172]

nice te copiaré la idea

[@plywoodworking]

Thank you very much!

[@kratingdieng]

Wuiih... senang sekali beta punya request kmrn sdh kakak wujudkan. *Torang gembira sekali sudah* . Kelak beta bisa hemat beta punya mata bor, tumpul asah.. tumpul asah.. tumpul asah.. tak ada lagi pepatah "habis tajam bor dibuang". Beta mau nabung buat si lemon dan juga inclinometer spt punya kakak.. beta suka. Ee kakak.. terima kasih, project kakak Did istimewa punya.. seng ada lawan.

[@muhammadyasin-hb3nj]

Semangat om

[@plywoodworking]

siap makasih dikasih masukan jdiya bs dibuat ngasah mata bor jga, bnrya ada bbepa sudut cm yg aq pake ini balik ke mata bor sudut normal 118 kyk baru kluar dri kotak alias new, ada yg sudut self centering 135 udh buat jga cm blm sempat tes, nanti klo sukses sy share lgi mas.

[@kratingdieng]

@@plywoodworking Siap menanti versi testing yang sudut lainnya.. sekalian dikasih liat before after dipakai buat ngebor ya mas.. biar pada tau komparasi sudut mana yang tepat digunakan sesuai kondisi bor yg hendak diasah. Makasih mas. Barakallahufiikum...

[@plywoodworking]

Oke siap mas ini lgi dtry eror dlu coz aq gk mau share klo hasilya teryata gk bagus, ntr dikira editan video / akal2an. Cb pake mata bor nachi ato toho lbh enak yg aq pake itu mata bor murahan tp hasilya ckp bagus, ntr aq rubah sudutya gmna hasilya

[@kratingdieng]

@@plywoodworking Siap mas... ahsan itu lebih baik, lewati fase trial error dl sampai hasilnya memuaskan dan layak dishare bagi sampean. Ini kebetulan mata bor ku hampir semua pake nachi mas. Makanya itu dg harganya yg berkali lipat dr bor yg biasa... khan boros kalau tumpul beli tumpul beli. Atau kasus-kasus mata bor patah, terutama untuk yg diameternya dibawah 5mm yg rawan. Jadi selama belom kesampean bisa beli bench grider, aneka mata bor-bor yang patah atau tumpul aku simpen. Pernah diajarin temen ngasah pake mata cut off yg lagi dijalanin dan jg pake gerinda tangan.. tapi hasilnya tentu ndak semaksimal dan memuaskan kl pake bench grinder yg dilengkapi jig khusus untuk proses sharpening-nya.

[@RajbirSingh-wg9pf]

Are you sure the trailing edge was lower than the leading ?

[@plywoodworking]

thank you very much 👍👍💕

[@user-wx8vw9lt8u]

это не заточка сверла. требуется как минимум 3 угла заточки

[@plywoodworking]

Thank you

[@loaoandrade6849]

Excelente trabajo, por favor como se pueden obtener los planos, gracias

[@plywoodworking]

thank you very much!!

[@joselynagoncillo8744]

I have drill bits - most of them dull, drill bit gauge to check angle and center, dremel tool, grinding stones, table, chair, portable light. Do I get to sharpen my bits? Yes.

[@plywoodworking]

thank yo very much 👍👍

[@ItsVideos]

13:38 That is not cutting like a sharp drill bit.

[@plywoodworking]

Thank you very much!

[@aaaaaaaaaaaaaaa96145]

3mm olurmu

[@petergaiser4213]

So in order to sharpen drills I have to have: table saw, miter saw, router table, router jig and a bench grinder. ???

[@plywoodworking]

are you woodworker or not? i sure if you woodworker you have that tools, if you dont make or build this jig you can buy sharpen drill machine on market or new drill bit !!!!! LOL

[@helmi_varotex]

Bikin yg split point om

[@plywoodworking]

split point klo gk salah sudut 135, udh bikin cm blm sempat divideoin, cm msh blm diuji gmn tajem, self center klo 135

[@helmi_varotex]

@@plywoodworking iya om, biar ga lari2 kalo ngebor awalan.

[@plywoodworking]

Bnr ada emg sudut khusus tanpa perlu dititk bs center, ini msh diuji cb dlu berhasil ap gk bedha disudut am cara asah aj, nanti klo udh nemu yg plng gampang sy share lgi

[@helmi_varotex]

Siap, ditunggu om🙏🙏

[@masterace6416]

why didn't he show in the video how he sharpened the second plane of the drill?

[@plywoodworking]

thank you very much!!

[@sebastianandrade2438]

Muito trabalho pra pouca eficiência,a limalha saiu preta .

[@plywoodworking]

more easy if you but new drill bit

[@MrJacksaun]

I didn't know Stephen Hawking made a KZbin video before he died.

[@plywoodworking]

he wake up from the died

[@petergaiser4213]

Yes, he needed to sharpen his drill bits, just like everyone else

[@user-pu6ri1ey1o]

Да ну,столько нагородить,еле досмотрел.

[@plywoodworking]

thank you

[@user-bn8vi5fd1n]

Парень, неправильно заправляешь сверло -- оно у тебя не будет сверлить. Труба просверлена нормально заточенным сверлом.

[@plywoodworking]

Thank you very much

[@dji4132]

Виктор Леонтьев все расскажет про заточку свёрл.

[@plywoodworking]

thank you

[@user-qr9lk9rw3y]

Заморочился слишком

[@plywoodworking]

thank you very much!!

[@starnor]

Автор скорее ботаник, чем технарь и немного оператор съемок... :)

[@plywoodworking]

thank yo

[@bluemax229]

That is a very complex device. Unfortunately, in operation... You still are rotating the bit with your finger and introducing it to the wheel. Your demonstration of technique was not worthy of the effort you put into building your device.

[@plywoodworking]

i dont know 100% this is right or not but this is work for me and my friend

[@timothylewis4183]

Rightly said, no accuracy in it,,,

[@osnelli]

Your apparatus is ok, sir, it does work, but it is so complicated, too much effort for few reward

[@plywoodworking]

Yes, you are right

[@mat6783]

C'est pas comme ça que l'on affûté un forêt. Ça ne coupe pas grand chose à la fin

[@plywoodworking]

thank you very much!!

[@phyx1s]

A lot of work making that tool. The end result is not that good. There are less expensive solutions with better result.

[@plywoodworking]

thank you very much 👍👍

[@wilfwild5182]

The video is great but the music is terrible. You cannot hear what you are saying over it. Get it taken off and do not have music on any more of your great presentations. Wilf

[@plywoodworking]

Thank you for suggestion i will reduce volume backsound, make more slow and comfort to hear

[@francishenriques6251]

Ce n'est pas du tout la méthode d'affutage. Cependant le gabarit est valable si on s'en sert convenablement !! il ne faut pas tourner la mèche.

[@plywoodworking]

thank you

[@genadilachinyan1280]

Ну бл... чтобы изготовить это надо иметь целый арсенал инструментов.Легче купить готовую продукцию в магазине .

[@plywoodworking]

thank you very much 👍👍💕

[@jimmytwizzle7836]

Fancy jig but that is not the correct angle or way to sharpen drill bits. I am surprised they even drill a hole afterwards.

[@plywoodworking]

thank you very much!!!

[@vint8048]

После такой заточки, сверло можно выбросить. Автор обманщик!

[@voronin1956]

Эт точно. Устройство не стоит даже цены тех деревяшек, которые пошли на его изготовление. Но автор говорит, что для него и его криволапых друганов - это то, что надо.

[@plywoodworking]

thank you

[@user-ph6oc8dl4s]

Я заточки вообще не увидел

[@diegokha5812]

Usted no sabe afilar brocas. Esta dando malos consejos

[@plywoodworking]

thank you very much 👍👍💕

[@kennynvake4hve584]

I cant see buying 500$ worth of shop equip. to sharpen a few bits..

[@plywoodworking]

thank you very much!! sorry for late reply

[@waynereid9526]

what a total waste of time and material.. with a little practice anyone can sharpen a drill bit by hand easily

[@plywoodworking]

maybe you expert but not all people can handle like you, i recomended buy new drill bit, not waste time and no need special or practice like you