Ultimate Assault Rifle - Ruger 10/22 Archangel AA556R

[@jaedenpohl3667]

I guess i would put the flashlight on the side rails then move the bipod all the way to the front so the legs fold foreward over the barrel so you can actually get a good grip on the rifle.

[@someonesomebody5453]

its not an assault rifle, its an AR for armalite rifle, terming it assault rifle is why we have issues with people fearing this type of gun-assault is not what AR means

[@Tony-tu8cn]

no it stands for assault rifles and the thing that scares people are the massive clips it holds!

[@babykelso7293]

@@Tony-tu8cn ar doesn’t stand for assault rifle and it’s a magazine not a “clip”

[@thomasluczak2868]

I get what you're saying. I am a lib dem that also likes guns & deer hunting. sad as it is to me, you could tell the insane ban every gun there is type of person that this gun shoots spitballs but the moment they take a look at that firearm, they wouldn't wanna hear it because it "looks " scary. lol.

[@craighall1452]

Well said!

[@thomasluczak2868]

@@craighall1452 right ? lol

[@warroberts862]

ProMag Archangel AA556R: just completed the conversion, did not have to sand down the sides of the receiver for the mag to fit. The rear top guard threads {butt stock & top receiver} was already stripped from the factory, not a big deal. replacing the mag release is option, if you have sausage fingers, you might want to do this. I completed this conversion in about 30 min, pretty darn easy. This video helped a lot, got me started, that's all I needed. The front sight was a breeze to tap out, people who complain about it being difficult, never worked on a weapon, tap a little harder! you wont hurt it. I see a lot of people knocked the title of the video, but look at the instructions sent, you'll not care! thank you for the great video

[@johnjriggsarchery2457]

Pretty slick. Gotta love the 10/22 and all the aftermarket goodies available.

[@esequielperez3418]

That aftermarket conversion kit looks cool ....seams like alot of work goes into assembly and just as much to disassemble when cleaning.

[@joebennett3503]

I would wrap the barrel with black paracord

[@larryfoster2227]

@@realitytroll1155 How do you figure? 😂

[@robertparkerhutcheson993]

​@@joebennett3503the barrel or the handguard? Barrel would melt the paracord.

[@djturnament]

i've literally watched this video 10 times. awesome review. Just ordered my archangel kit tonight. Keep you posted on how it looks!! Anyone looking for a wooden stock ruger 10/22 let me know!

[@hunnerhall841]

Do you like the kit

[@michaelpierson7256]

​@@hunnerhall841 if u have a 10/22 u have to try this kit it's way way cool. My stock was only $99

[@Wkumar07]

I'm looking into buying a 10/22 and I wanted to see how easy it would to change out a stock. You made it look easy even for a guy who doesn't shoot often

[@cordellmassey3870]

in Texas Only a weapon with a fireselect switch is a Assault weapon. everything else is a long gun but a 10/22 with a bump fire stock or auto set up will burn through 30 rounds in literally 2 seconds depending on the operator and ammo quality but this gun is very very fun. I was happy I bought mine.. thanks for the video man

[@maxheadroom7649]

If you use the m/lock rail you can mount the light on the side and still be able to mount the bipod correctly so the legs fold forward otherwise a very cool setup

[@nathanmaynard131]

The new Talo edition from ruger comes strait to the distributer with an ATI ar15 style stock on it. It's what I have in my newest video about my survival kit. Check it out. $350 for the whole package

[@GeorgeBonez]

Man for the money I think I’m going to go with the GR22 Chassis for my sons 10/22. It’s only $50 bucks and looks so much nicer (in my opinion) and it goes together without any special attention to anything.

[@tigerpisces5506]

GR22 Chassis 10/22 looks interesting and cheaper

[@GeorgeBonez]

@@tigerpisces5506 I did it and it’s great. Easy as heck to install and looks pretty awesome.

[@evlutionzllc5519]

'.... and it looks dumb' hilarious! I agree, the muzzle end stuff is goofy. The rest of it is fine though. I have a customer wanting this installed and I came here to estimate about how much time I would have in it. I appreciate the help. - evl

[@michaelpierson7256]

I altered mine to use a steel muzzle brk/flashhider. It's way better looking.

[@qbnp]

WARNING: DO NOT OVER-TWERK IT GUYS!!! I over-twerked my stock and now it won't stop asking for Starbucks and taking selfies with me.

[@Josh..420]

Twerking videos are the Best! 😀

[@dworkx1]

😂😂😂😂

[@texasandlarissawheeler9851]

😂😂😂

[@michaelpierson7256]

I see a lot of comments about being hard to clean, U can still get a cleaning rod down the bbl & oil in the action.

[@kagekun7689]

why do ppl bash the 22 LR leave it alone it will get the job done weither killing rodents or killing a person. it may not hit hard or blow a big fucking hole in someone.

[@mikebaird6788]

I had a Butler Creek 25 round for a while and I could never ever get it to work had to grind a bunch of stuff off the feed lips and it's still only would have work right I went to the BX25 because it's made by Ruger and it works with everything perfectly just like the triggers that Ruger makes

[@michaelpierson7256]

If they had this stock when i was a kid it wouldnt have ever left my side, way cool factor, although i altered mine, i also didnt like the fake flash hider so i cut the flashhider part off so the rear part w/rail/lug is 2.650" long & used a steel muzzle brk / flashhider, i added an extra setscrew to the flashhider & shimmed it to fit better then shimmed the rear part of the bayo lug/rail to fit bbl better then added a long setscrew thru the center web of the rail on top. The length of the bayo lug part makes the bayo bbl ring fit the steel muzzle brk in just the right place. The plastic bayo is very pointy & tough. A real bayo is to long handled to fit (i tried) Mine has a 22cal bul. Drop compensating scope, 45° backup sights, an AR sling, bypod & steel flash hider / muzzle brk. I Still need a recoil pad to make it a little longer thou. The only thing they could have done better was the bayo bbl hole is way to big (sloppy fit) this was a very fun project overall. I realy like it a lot. I also quit using any aftremarket mags, i just use ruger bmx mags & it just doesnt jam at all anymore, just purrs like a kitten in heat.😊

[@cobbetlprogrammer1344]

Nice Job my Friend! Cheers.

[@capincrunch789]

Super cool. Thanks man a good gun to start a build on. Looks awesome!!!

[@biggmike1222]

I think it looks cool but I definitely wish the handguard was longer

[@br5498]

I was thinking the barrel is to long..

[@saints39]

New to guns and tinkering. thank you for this awesome video!

[@herbalenrichments]

Hi. Are there any legal concern on changing the stock of a ruger 10/22. I'm interested in using the archangel stock?

[@iittssuussaa]

Technically any fire arm can be called an assualt weapon if it's used to assualt another person.

[@mattpeacock5208]

True story! One of my ballpeen hammers is officially an assault hammer. I probably shouldn't speak of it since the court case is pending.

[@duggydugg3937]

Jose wow a thinking dude !

[@iittssuussaa]

What ever you say sir

[@iittssuussaa]

Yes sir

[@duggydugg3937]

@John D ass salt weapon... no foregrip....

[@bfgivmfith]

I agree that the fake flash suppressor and polymer bayonet are bogus. My 10-22 is stainless as well, and I was unsure if I wanted to waste money on this kit. But I like the way you utilized the important parts, and think that looks really good and functional. This will be a cost effective way for me to shoot, without having to spend just as much, if not more to swap my bolt carrier back and forth on my AR. Thanks.

[@michaelpierson7256]

I altered mine to use a steel muzzle brk / flashhider, it looked way better.😊

[@brentmeacham3758]

Nice kit. I think I’d change out the barrel for a larger diameter so it fills out the housing.

[@marcuscompton3772]

He may be a little strapped for cash after buying all the other products.

[@LarryGanz]

Great review, if you'd just change the title since this is not an assault rifle. Thanks!

[@juniousfelder2085]

Awesome build.

[@meilanyjulita2806]

Hi, is the Pistol grip removable or is it fixed with the lower receiver? Best Regards :-)

[@petejackson3687]

No

[@larryfazen6468]

Good video, nice kit. Unlike you I purposely bought a cheap 1022 with a blued barrel to keep the appearance of an all black gun. I have a few with stainless barrels including the takedown. Nice rifles

[@michaelpierson7256]

I altered my funky fake flashhider to use a steel muzzle brk/flashhider, looks way better this way. I shortened the old one to 2.65" long on the rear section😊

[@mtnride4930]

I have the takedown model and a stock 10/22 and like them just the way they are. Whatever floats your boat, but I think the Arch Angel stuff is crap on a 10/22 or the mini 14.

[@mexicanwhiteboy1114]

So i know im super late but im wondering, can you put the original sights back in the barrel??

[@raph604]

i just got my rouger going with this setup THANKS!

[@bagellord113]

edit this bud, gun freaks stare at this comment.

[@Mutt69m]

I agree with most of the comments, the 10/22 is a "Firearm" . I think using or saying the term, even in jest, "Assault Rifle or Assault Weapon", is just asking for trouble with the Anti Gun Groups. Why give them another firearm to take away and ban, because some people don't think about how calling the 10/22 an Assault Rifle plants the seed in the Anti Gunner's mind, and no amount of reasoning will change their minds once it 's set...

[@Cloutchaser1]

My only question is are those holes on the side is the handguard mlok and if they are can they actually take accesoriee

[@Bernievids]

Love this video. Thank you for making.

[@MeltWithU]

Do you think that the kit could be modified to work with a Ruger 10/22 takedown model? Maybe with a little Dremel work, so that the barrel could still be taken off?

[@koalwright2576]

Nice tutorial, just stumbled across your KZbin channel and noticed you hadn’t made any videos in a long time. Hope all is well.

[@Thefirearmsshowplus]

Thanks, life just got in the way and my co-host didn't want to do it anymore. You can find me over at HTTP://kzbin.info

[@Operator-fq2fn]

Will this kit work with the rossi 22 or Mossberg 702 ?? Please let me know i want to order this

[@hughgrection7246]

Where can I get the Lock and barrel for a 10/22 naked ? I don't want to buy a whole rifle just to strip it down and have the old wooden body laying around uselessly.

[@umbrellacorpninja7486]

i miss my 10/22 dammit! i wish i never sold it

[@jodywooten5511]

Cool kit, but you definitely need help with the add ons, the stuff you put on there will be spotted a mile away, as crap. Get a better light laser, so you don't have to put the bipods on backwards. The rifle does look pretty cool with the new stock.👍

[@trevorb3521]

Can I use any model of the 10/22 or does it have to be a tear down model?

[@davidkusterer8981]

The ruger10-22 is the most favorite 22 cal.rifle of all time. By dressing- this rifle up to loo scary is calling the tar down on the backs of thousands of owners. I think it is reckless to demonize this weapon as it NOT an AR or a Am. Now this is America and you have the right to do this modification to your rifle should you choose. But have the common sense not to call this rifle a assault weapon on KZbin.

[@jimsundstrom6531]

Will this work with the 10/22 that breaks in half?

[@BChan1991]

It looks dope without the barrel cover. Seems like it wouldnt lose much functionality without it

[@tacticool2222]

Good lighthearted video, but "assault rifle"???

[@MrZoom2me]

how does the Archangel conversion compare to the ATI conversion in quality and ergonomics. I have an ATI scorpion but to be honest was surprised at how heavy it ends up being even without jewelry ..... also have a factory stainless with the International gray laminated stock (runs to the end of barrel) that I absolutely love

[@sovand]

think it'd be able to fit a GSG German 110 round clip with this kit? I've been looking to buy this for awhile now and it seems like it would fit just fine

[@DoomFinger511]

Dissapointed that there is no cheek raise in the kit. Also you should of put the front piece on with the rail (just leave out the plastic knife). That's the best place to hook on the light/laser and leaves room on the back rail for the bipod.

[@thefatfrog713]

I like what he did with the 10/22 but I'm like the other guy . Can't hit the like button because of video title . Still a good squirrel rifle .

[@SweGunner71]

On the original ruger, the barrel rests on the whole length of the stock, and is held down tight by the barrel band. On the archangel the lock down screw is the only thing that holds the barrel/mechanism to the polymer stock. How does this affect accuracy of the rifle, especially on longer ranges?

[@SweGunner71]

Albert Johnson So, the accuracy is not affected? Cool.

[@Rex-gg7rh]

Are this convertion kit for 10/22 Ruger are available in Canada

[@Thefirearmsshowplus]

I have no idea, this video is 9 years old

[@rugerrocker7483]

The only problem with the stock is there is too many things to take apart when you want to clean it, I have one and it was cool but really, it's a .22 It's not by no meens my one of my AR's, so I went with Boyds Custom Stocks on both mine. Expensive yeah but BEA UTIFUL. haha

[@FrozenPaint]

This video needs re-titled:"Let's play dress up!"

[@flasks3]

You hit the nail squarely on the head...a chipmunk rifle with make-up

[@biggmike1222]

Yea I agree but you do gotta admit it does have a lot of practical uses cheapest plinker, varmint and small game and it is better than nothing in self-defense

[@thewaydownmachine]

I don't hear anybody volunteering to be shot with a 10/22

[@timothyavendt677]

@@thewaydownmachine What's the point with that comment?

[@Expressoo22]

This is not an "ASSAULT" Rifle ..

[@Thefirearmsshowplus]

Well...to put it bluntly.....no shit. Watch the video, I make fun of the phrase. Next time you should WATCH a video before commenting on it.

[@Expressoo22]

Next time Change your title . Hater .

[@Thefirearmsshowplus]

Who is the hater? You come here and post a comment WITHOUT WATCHING THE VIDEO.

[@Expressoo22]

now you are annoying ..

[@Thefirearmsshowplus]

Annoying is douchenozzles that don't bother to watch a video where it is OBVIOUSLY a joke and feel they should make a comment not having bothered to find out what was actually said.

[@snipehunter795]

I just ordered one of these for a TC/r22 without knowing if it fits.......I may have one for sale in a few weeks if not. Everything else for a 10/22 fits, even stocks, so....

[@Moby604]

Why assult rifle? Its just a regular 22 carbine, is it full auto?

[@youngtone00]

That is so slick

[@blueboyblue]

Curious ... What is your Barrel Length - 16+" or 18"?

[@xxborithedemonxx9153]

Can i use this with a ruger 10/22 takedown model

[@xapemanx]

looks pretty cool!

[@annieroberts1204]

It's pretty cool. One of these, anda .223 AR platform with the .22 LR conversion kit. Then ya grab your Hi Point C9 and the 95 TS 9 mm. You're good to go.. Two calibers, 9mm and .22 ya have ammo for 4 different weapons. A 9mm ad 22 pistol, a Carrbiine and a rifle. How cool is that?

[@timmysingh8062]

Does this make cleaning the firearm harder?

[@bitingmongeese-geoffreybyn8311]

Nice rifle conversion. Does the kit allow for a rail to be mounted on the side of the handguard?? I would prefer my light/laser on the side allowing the bipod to go right forward on the bottom rail and to fold forward under the barrel. I think I would prefer a slightly shorter bull barrel threaded for a muzzle device or suppressor too. BUT it is a really nice conversion kit for a real nice, fun, small game capable rifle.

[@austinalexy9870]

Yes you can mount picatinny tails to either side of the handguard. I haven't gotten to it yet but that's what I plan to do when I build mine as well.

[@bigdowglb]

Do you still have this 10-22 stock and if so do you want to sell it?

[@lorddiablo8575]

I am wondering if this Archangel stock-set suitable for Ruger 10/22 Take-Down model ?? If so, it will be PERFECT ! !

[@aLwE17]

Always wanted an archangel kit for my 10/22 but it's not available in my country, and my country's import laws regulates any firearms and accessories imports, so it's kinda impossible to but directly online, managed to buy a tapco conversion kit locally for an expensive amount and modified it. Used my 10/22 for ipsc mini-rifle competitions but the constant jamming problem despite being squeeky clean just became a really big issue especially in timed competitions so I bought an S&W M&P 15-22 for competition shooting. I'm now trying to sell my 10/22 because my country's laws require me to renew firearm registration every 4 years which costs a lot of money since I have multiple firearms, but i'm still hesitant to let go of my 10/22.

[@TsGhosty]

Dang I'm sorry what country you in?

[@thewaydownmachine]

The way he takes off the screws makes me uncomfortable.

[@richmcintyre1178]

Why not buy an M&P 15 22 in the first place?

[@newerest1]

Rich McIntyre that gun is horrible compared to a 10 22

[@danielcampos3079]

I know I'm a year late to the comments but reliability good sir. Since all your changing is the looks not any major functioning part of the rifle the 10 /22 reins superior in quality. Only thing that remotely compares is a kel tec

[@iittssuussaa]

Technically any fire arm can be called an assault weapon if it's used to assault another person,

[@biggmike1222]

Jose A. Cardoza That’s wat I’m sayin

[@BM205]

Great point. There are assualt rocks assualt 2x4s assualt words heck everything needs banned I guess not jus our guns

[@edwardsauer6084]

I put a bull barrel on mine which eliminated the use of the barrel shroud.

[@chanosalinas77]

Drinking game: Alcohol of your choice. Take a sip everytime he says cool!

[@tomn5880]

Good video. One thing is there is no such thing as an ASSAULT rifle. It would be nice if you stopped promoting that concept. Convert a 1022 to a TACTICAL look rifle. But good presentation video.

[@suetaylor1127]

That’s not an assault riffle, its plinkster, a very fun plinkster indeed.

[@heshamsubuh8302]

this is not an assult rifle completely the opposite . thanks to the media that is

[@markbowerii7632]

I find it hilarious how the left demonizes the AR and especially the AK but say nothing about the 50bmg which can dismember any part of the human body with one shot. Especially when you think about how the AK is a 30cal and AR is a glorified 22cal.

[@bushkush808]

Do you know if a mossberg 702 would fit Innone of these ?

[@froggiecky85]

No its for ruger 10/22 only

[@bdl6969]

is the buttstock changeable on the archangel kit?

[@jayrowe6473]

How's it holding up 7 years hence?

[@Thefirearmsshowplus]

I still have it on it. Just makes it harder to clean, but its not bad. I use a cleaning rope and it goes pretty quick.

[@danijo5632]

I have a question though, would this stock work with a target barrel?

[@Thefirearmsshowplus]

It should

[@sovand]

wait and also, on the contact tip, does the bayonet detach from it?

[@zachkrantz7691]

Assault rifle seems like a pretty good term even if he was joking. You people really under estimate a .22. Let's say I loaded that thing hollow points it will do a whole lot of damage to you or me. Like it or not this is a gun that can kill or badly injure things!

[@jonshaw9276]

Name one that wouldn't badly injure anyone. Isn't that what there made for?

[@Loneadmin]

All assault rifles are machine guns. Is this a machine gun? No therefore its not an assault rifle

[@oakland002]

Way to go , calling it an assault rifle .. try explaining that in court if you have to use it even though it’s just a .22 lr

[@johncasey5817]

I have a Lakefield 954 LS 22 long rifle... will this kit work on my rifle?

[@Thefirearmsshowplus]

No, it is for the Ruger 10/22

[@noahbarney6098]

Great video! Do you know if you can still use the standard 10 round magazine with this setup. How about Ruger BX-25 magazines? Thanks

[@2wheeleddemon745]

Noah Barney yes

[@Pressingontoperfection]

Do they make those for the takedown models

[@joemoyle2]

Man I don't know about you but we are going to have some fun that's for sure

[@wadenicholls1859]

thats all very pretty mate but how do you clean it i clean my 22 every time i shoot it

[@silodelair]

could you use this with a savage 64f?

[@buddycarroll9641]

Do you have to take it all apart to clean it?

[@michaelpierson7256]

I dont, I just clean it normaly.

[@mattpeacock5208]

Stuff like this is cool! It keeps the video game wanna be operators focusing on shit I don't care about. I wish everyone that needed a Garand rifle or an O3A3 after seeing Band of Brothers or Saving Pvt Ryan would turn their attention to this shit instead of driving the price of surplus rifles through the roof!

[@infringinator]

Hey I bought a ruger SR22 would I be able to convert it to the original 10/22 in the wood stock? MUAHAHAHAA sure I paid an extra $100 but mine came straight from ruger ready to roll.

[@sovand]

Very good question, you should have no problem doing, hopefully someone on here thats tried it, will see it. I have the 10/22 wood stock and I love it, wanting to pump some money into it to turn it like SR, just a tad different. Let me know if you figure stuff out and on how it goes man, sorry I wasn't much help.

[@djrocker1007]

Did you have any issues sighting it in? I have read reviews that state that they are hard to sight in due to the height of the scope rail compared to the barrel. Thanks! Great video!

[@michaelpierson7256]

I just saw a vid of some guys mounting there scope 2 or 3 feet above the bbl, they said it was still accurate, go figure.😊

[@rturpening]

It's not an assault rifle, please don't call it that. Just call it an AR or something.

[@Bevo_Baker]

Semi-automatic rifle

[@KerryGarrison]

Olukold Meust Did anyone watch the video? I was JOKING.

[@BLaCkKsHeEp]

Olukold Meust i do that sometimes...

[@ConradHeil]

AR stands for assault rifle

[@Thefirearmsshowplus]

***** AR is from the company Armalite that (ARmalite) that made the first one. Google can be your friend.

[@NoPro1962]

Nice I will stick to my Kryptek MP1522.Mini AR.

[@ccruz6124]

Hello, has anyone use this on a takedown model? Will it work?

[@UsMaLeMan1]

I second Lawson11b, you are really pissing legal gone owners like me when you use terms like "ASSAULT RIFLE" to talk about a .22 cal Ruger that you put a plastic stock on. It's NOT an "ASSAULT RIFLE" because it has a black stock. Tighten up your shot group buddy and get your terminology right.

[@Whitemonsterlover69]

Would you recommend this conversion kit?

[@KerryGarrison]

If you like it sure. Its a pain to take apart for cleaning. i prefer the Slidefire AR stock.

[@rangeman1566]

Great job, I’m thinking about doing the same thing. Do you have to do the bolt release change?

[@davidpershing2512]

Will this kit work with a 10/22 takedown?

[@shariftorki4434]

David Pershing. Yes it will

[@chrisbarr959]

can i use this kit with a 10/22 with a target barrel?

[@2wheeleddemon745]

chris barr yes