How to set up your LVLP spray gun to paint cars

In today’s video I show you how to set up your Lvlp spray guns to paint cars and how you can set up the spray gun to best fit you so that you can apply your materials how you want. In this video I go over the spray gun and the three controls and how you want to set them for the best results.
R500 lvlp spray gun: amzn.to/3MMNLnN

[@alexbatres3880]

I worked in a body shop about 8 years ago. Decided to pick auto-body up as a hobby again but didn’t want to invest over $1,000 in a compressor, and expensive spray guns. Everything I’ve thought of doing you’ve had videos for. Greatly appreciate your videos and your energy!

[@UndergroundPaintKing]

You’re welcome Alex and I hope the channel continues to be helpful and I appreciate you checking out the channel!

[@gtwrmw1978]

Underground Paint King, thank you for these excellent videos. After struggling to get results with my hvlp and hte guns with my small compressor, sanding heavy orange peel, trying again, sanding, trying again, I finally took your advice and got a Sprayit LVLP. I set the gun up exactly as you described in this video. Finally, smooth paint! You've done the DIY community a huge service with your channel. THANK YOU.

[@UndergroundPaintKing]

You’re welcome R. I’m glad I can help in any way possible and glad to hear it worked out well for you!…appreciate you checking out the videos 💯

[@user-oz2uh3sq2k]

Idc what no one says, you helped me! You showed me exactly how to set up my spray gun! You also showed me how to set up my compressor which is exactly like the one in your video!

[@UndergroundPaintKing]

Glad I could help you out Jerry and I appreciate you checking out the videos!

[@jiujit49]

These basics are what people want to hear, great job man!!

[@UndergroundPaintKing]

I do my best to help with the basics to help my people out Audi4ever…I appreciate you checking out the video!

[@bluesbubba7429]

Thanks King! That helped me get the new R500 set up for the first time. I'm spraying a guitar and this helped a lot!

[@UndergroundPaintKing]

Glad the video was helpful BluesBubba💯❗️

[@TurboHDT]

I love the way you have shown beginners how it works they can get their head around ive seen people waffling on and confusing them 👍

[@UndergroundPaintKing]

I appreciate you for this and I hope the channel continues to help people 🙏🏽💯

[@SprayWayCustoms]

That’s a fact. The spray pattern matters 👍🏾keep that knowledge coming King 👑

[@UndergroundPaintKing]

Thanks Sprayway I appreciate you 💯

[@natalieyt1851]

as a complete novice, this is very helpful, thanks!

[@UndergroundPaintKing]

You’re welcome Nataliey, I’m glad the video was helpful!

[@Glofilter]

Awesome video. You made it look simple, and did an excellent job explaining how to get it set up. Much appreciated.

[@UndergroundPaintKing]

Thanks Glofilter, I appreciate you checking out the video and I’m glad it was helpful!

[@joewalton2726]

I'm glad I found your channel. I'm getting the information I need to start my project with confidence. . Thanks

[@UndergroundPaintKing]

I’m glad the videos are helping Joe and I appreciate you checking them out!

[@zaydrahman3080]

I was waiting on this video. I appreciate All the good info. Straight direct to the point. I got my UPK sticker in the mail. Thanks 🙏🏿

[@UndergroundPaintKing]

Glad to hear you got your sticker and good luck…I appreciate you Zayd!

[@ceesklumper]

Great video as always, thanks UPK, you've helped me get started painting, now have done 4 cars in the garage and they came out great thanks to all your tips

[@UndergroundPaintKing]

That’s awesome Cees I really enjoy hearing success stories like yours and glad I could help…I appreciate you checking out the videos!

[@richarcruz7843]

Thank u UPK God Bless for all ur knowledge every video is a wealth of knowledge for generations to come 💪🏽💪🏽💪🏽

[@UndergroundPaintKing]

Thanks I appreciate that Richar and appreciate you checking out the videos!

[@willhart7861]

Appreciate you putting the time into making these great videos to help people like me! Much respect and appreciation to you brother! Thank you!

[@UndergroundPaintKing]

You’re welcome and I’m glad the videos are helpful!

[@halfinchholes88]

Another informative video. I've learned more about painting than the summers I spent working in my father's body shop. Everything was already setup, and you didn't adjust/change anything. Did a LOT of sanding, masking, and surface prepping those months. I've got 3 stickers and a T riding on this raffle.

[@UndergroundPaintKing]

Thanks I appreciate you checking out the video and I appreciate you supporting the channel…good luck Half-inch-holes!

[@sethdachenhaus5792]

Super helpful to the point and expained not only what it should look like but what other adjustments may look like. Thank you

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful 🙏🏽💯

[@kirbyconner9952]

Great explanation simple and to the point.

[@UndergroundPaintKing]

Glad the video was helpful!

[@xray364]

What a great video. So glad I found this channel.

[@UndergroundPaintKing]

I’m glad you found the channel and I hope it continues to help Xray!

[@The_TrueBat]

Very simple and helpful tutorial, thank you

[@UndergroundPaintKing]

Glad the video was helpful Leon, and I appreciate you checking it out!

[@joeybarry1827]

Love the video short and sweet been spraying gell coat for years getting into automotive paint and body work so this definitely helps thank you Brother!!!😊

[@UndergroundPaintKing]

You’re welcome, glad the video was helpful and I appreciate you checking it out 💯

[@DaVid-yp3js]

I have learn a lot in watching 2 of your videos, how to setup spray gun with correct air pressure and this video. Thank you, sir.

[@UndergroundPaintKing]

Glad the videos help David🙏🏽💯

[@lidieri]

Greatest explanation ever ! Thank you sir. 👍🏻

[@UndergroundPaintKing]

I’m glad the video was helpful 🙏🏽💯

[@mellis181]

Just picked up this gun. Thanks for the lesson!!! Might be back to ask some more questions. 🙂

[@UndergroundPaintKing]

I’ll do my best to help out 👍🏾

[@ErikisOfficial]

I love what you do mane. Lots of free education. Even though I'm an aircraft painter we all kinda used the same equipment.......and spraying is spraying! No matter the field!

[@UndergroundPaintKing]

Yessir 💯 I appreciate you checking out the videos, it’s always good to hear from a fellow painter 💪🏾

[@leejones733]

Great video. Very helpful for a newbie DIYer. Thanks for posting!

[@UndergroundPaintKing]

You’re welcome Lee, I appreciate you checking out the video 💯

[@jaimereyes7480]

Great content. Picked up a summit lvlp gonna test it out one of these days on a replacement door for my dad's work truck.

[@UndergroundPaintKing]

Nice Jaime💯 let me know how it works out for you and I appreciate you checking out the video!

[@jonnyturbo6142]

thanks for this one..Rewatching this right before I hop in the booth for the first time…the people’s champ 🙌🏾

[@UndergroundPaintKing]

Good luck and I’m glad the video helps Jonny💯

[@moon-lit-rider987]

I'm learning how to paint for the first time & I'm watching lots of vids, thank you for this its a great help, its just what I needed 👍

[@UndergroundPaintKing]

Glad I could help Craig and I want nothing but success to you!

[@wacoldestv1704]

I never opened my fan full throttle. It's was taboo in the shop I worked at years ago but when you did it. It looked like it would be very helpful next time I paint anything. Much respect upk

[@UndergroundPaintKing]

Don’t be afraid to open that gun up MrWacoldestv you might like that setting, at the very least do so test panels and see if it works for you…I appreciate you checking out the video!

[@thegreatpatsy]

Thanks so much for explaining things nice and clear and to the point!

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful and appreciate you checking out the video!

[@micko1404]

Awesome simple explanation mate, thank you, cheers from Australia

[@UndergroundPaintKing]

You’re welcome and I greatly appreciate you watching from Australia!

[@ralphbeek9257]

Thanks for the help, great information, straight to the point

[@UndergroundPaintKing]

You’re welcome Ralph and I appreciate you checking out the video, glad the video was helpful!

[@davej.7934]

Thank you ! One of the most informative , easy to understand and most importantly no nonsense content creators I have seen. Just about every question I have had you answered in the moment.

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful 🙏🏽💯

[@jamiewillaert5371]

You're definitely the peoples Champ! Another great video!!

[@UndergroundPaintKing]

Appreciate that Jamie and appreciate you checking out the video,I hope it helps!

[@starrpuruto588]

awesome channel bro thankyou so much for sharing your knowledge and skills thanks for keeping it real.

[@UndergroundPaintKing]

You’re welcome Starr Puruto, I appreciate you checking out the channel and I hope it’s helpful to you 💯💪🏾

[@jack91522]

Thanks for the tutorial. You're the best!

[@UndergroundPaintKing]

Thanks Jack, I appreciate you checking out the video!

[@jimviau327]

Oh Man! I wish I saw this video before I started my job. It would have prevented me from scraping $100 of paint. Thanks

[@UndergroundPaintKing]

Wow! Hate you had to do that, hopefully the video helped for the next time you spray

[@cmerighe2]

You are a great instructor!

[@UndergroundPaintKing]

Thanks Carlos I appreciate you!

[@mixtoure]

This was helpful King. Appreciate it

[@UndergroundPaintKing]

You’re welcome Willie I’m glad I could help and I appreciate you checking out the video!

[@sergioferreyra3095]

Amazing how you explain bro , thanks for your time

[@UndergroundPaintKing]

You’re welcome Sergio I hope the info helps!

[@clipps11]

Definitely subbing as I wanted to learn to paint my own car for years thank you 🙏🏽 you’ve earned a follow out of me for sure !

[@UndergroundPaintKing]

I appreciate you subscribing to the channel Clipps and I hope it’s helpful to you 🙏🏽💯

[@LakesideAutobody]

Great information on spray gun set up UPK - nice demonstration :)

[@UndergroundPaintKing]

Thanks Jerry I appreciate you checking out the video…enjoy your upcoming weekend!

[@michaelfranklin4921]

Great video King! Thanks! 👍🏾

[@UndergroundPaintKing]

You’re welcome Michael I appreciate you checking out the video!

[@myoneblackfriend3151]

The video I needed to see. Thank you.

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful ❗️

[@frankrodriguez1977]

This will help tremendously. Thanks UPK

[@UndergroundPaintKing]

You’re welcome Frank I’m glad the video helps!

[@rogerteal6727]

Great video brother and thanks for sharing your knowledge! 👍

[@UndergroundPaintKing]

You’re welcome Roger, I appreciate you checking out the video and I’m glad it was helpful 💯

[@sugarcanfly]

Thank you I learned something I didn't know about lvlp guns

[@UndergroundPaintKing]

You’re welcome and I hope the video was helpful!

[@whiteboy3888]

Great vid, was just what i was looking for 💪

[@UndergroundPaintKing]

I appreciate you Gabriel and glad the video helped!

[@LivinginDowntownPhoenix]

Great video. Thanks for the help!

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful!

[@CutlassVibes]

Great info! Thank you

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful 💯

[@laca8612]

Thank you for the video, great explanation! :)

[@UndergroundPaintKing]

You’re welcome and I appreciate you checking out the video and I hope it helps!

[@bosshawg7427]

Another excellent and straight to the point video! I'm actually impressed with the fan on that gun. Wide open is ok, but appears that it can easily get a finer edge like you adjusted it and still have a decent size fan. Reminds me of my Astro Evo4014 gun.... they share parts. Lol. Keep up the knowledge sharing!

[@UndergroundPaintKing]

Thanks Boss we was just having that conversation about the fan on one of the other videos lol…I appreciate you checking out the videos Boss Hawg!

[@bosshawg7427]

@@UndergroundPaintKing yes. I didn't realize how similar the Sprayit, Astro Evo4014, and Warwick 904H guns were. Come to find out, they're all clones of an Iwata W400 and can share aircaps and needles according to a source. Basically the guns can be upgraded if parts are sourced.

[@smarternu]

Good audio, nice information. It's all about flow.

[@UndergroundPaintKing]

I definitely took what you said into consideration and appreciate you!

[@marcdesantis3183]

Excellent tutorial.

[@UndergroundPaintKing]

Thanks Marc I appreciate that and appreciate you checking it out!

[@drivinmylifeaway]

Wassup. I just ran across your videos the other day and you are my go to guy for all things painting from now on. I just bought a Spray it 33000 lvlp based on your reviews. I previously purchased an ATD three gun hvlp kit for my first paint job but after watching your videos, I'm convinced that lvlp will perform much better with my 33 gallon compressor. Thanks for all your instructional videos, they really help.

[@UndergroundPaintKing]

I’m glad the channel has been a help to you and the SprayIT along with your 33 gallon compressor is going to do well for you!

[@drivinmylifeaway]

@@UndergroundPaintKing with your videos as a guide, I hope to turn my drab 97 GMC Sierra into a two tone masterpiece. Thanks for taking the time to make them for us

[@UndergroundPaintKing]

@@drivinmylifeaway you’re welcome!

[@Allen-ln6gz]

I really appreciate your time and information Thank you

[@UndergroundPaintKing]

You’re welcome and I’m glad I could help Allen!

[@rcs0296]

great info,thanks for your videos

[@UndergroundPaintKing]

You’re welcome Richard I hope the videos help and I appreciate you checking them out!

[@ZwithTheCutlass]

Just what I needed to know!! Preciate it

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful 💯

[@davidbretz6345]

love these tutorials!

[@UndergroundPaintKing]

Thanks David I appreciate you checking them out and I hope they continue to help!

[@greywolfe381]

Thanks man that was well informative, 👍🏻🤘🏻

[@UndergroundPaintKing]

Thanks for checking out the video Grey Wolfe I appreciate you and I’m glad the video was helpful 💯🤘🏾

[@superbear617]

I'm not sure how I found your channel; maybe Slade's VW. But, you do a very good job explaining this - very helpful.

[@UndergroundPaintKing]

Glad you found the channel and I hope it helps Super Bear…I appreciate you checking it out!

[@FATALMONSTROCITY]

Damn bro your vids are straight to the point and very informative. I do body work and want to get into painting my own stuff. Damn this is making me want to prime my car right now lol thanks

[@UndergroundPaintKing]

Lol glad the channel is helpful to you and go ahead and pick up that spray gun and slang some paint, I know you can do it 💯💪🏾

[@Derek_Kryzanowski]

Oh! Upk, this is the content I subbed for brother! Keep that red hoodie stocked I'll be grabbing one soon

[@UndergroundPaintKing]

I appreciate you subscribing Derkachan and I appreciate the support and look forward to you placing your order, it’s a real honor to have people that want to support!

[@checko78na]

Very good tutorials bro! 👍

[@UndergroundPaintKing]

Appreciate that and hope the channel continues to help!

[@1Warzone1]

Good looking 👑. I'm about to spray my tsx again. The first time we sprayed a gallon of primer and a gallon AE paint but got alot of orange peel so hopefully on this next gallon second time is a charm

[@UndergroundPaintKing]

Good luck on this next spray Fam!

[@dustinmason7121]

Brother thank you very much for your videos! I'm working on getting a van set up to do mobile paint corrections and bedliners. I was contemplating a turbine sprayer but after watching your lvlp videos I'm confident in my 33gal Caftsman's output. I know it will run a texture gun for liners already.

[@UndergroundPaintKing]

The small compressor setup will work well for your business Dustin and I hope nothing but much success for you!

[@dustinmason7121]

@@UndergroundPaintKing got my stickers today. Got one on my van.

[@UndergroundPaintKing]

@@dustinmason7121 nice!…im glad the stickers got to you and we’ll be doing the giveaway soon…I hope much success to you Dustin💯💪🏾

[@ardenstrat]

awesome video brother, i needed that video

[@UndergroundPaintKing]

I’m glad the video was helpful Jose💯

[@nuxboxen]

Well done my guy!!! Thank You

[@UndergroundPaintKing]

Thanks Nux Boxen I appreciate you checking out the video and I hope it helps!

[@sharonkirven9570]

EXCELLENT!! It truly can’t be explained any better❤️❤️❤️❤️😊

[@UndergroundPaintKing]

Thank you Sharon I appreciate you checking out the video and I hope the information helps 🙏🏽

[@sharonkirven9570]

Hey King!! I’ve got a question, it doesn’t pertain to this lesson, but nevertheless I may not be the only one needing this knowledge. If your base coat is wrong and you caught it and didn’t proceed to clear, Should you sand the base off and start over or just sand it lightly and spray the correct color on. Note: this is for a primed new purchased panel and a sanded bumper that was already painted but just needed the new base color. In other words one pc is new maroon pad sanded then sealed and base colored, the other pc was just a different color so sanded and sealed and base sprayed. I know this is a lot so take your time when you have time. No hurry here!! Thank you as always, you know I think your the Best!!❤️💙😊

[@UndergroundPaintKing]

@@sharonkirven9570 you normally have a 12 hour window before you have to apply your clear and after that you need to scuff the base to clear or respray the base then clear so I have to ask you is the color you have sprayed just not matching or is it a completely wrong color because if it doesn’t match but it’s close and within that window I would apply the correct color then proceed to clear

[@sharonkirven9570]

@@UndergroundPaintKing Ok that’s what I thought but thought I’d chk with the Pro.. The color is a bit to dark. It’s in the same family just a hint to dark. So I thought after clear coating it, it may go darker. I’d hate to waist good clear coat and have to purchase both again. It looks like I can sand the base off and prep to respray a closer base coat. Going to let a auto store here put the computer on another part of the car to get the base closer. I went with the code but it’s too dark..Thx U Thx U Thanks!💙😊

[@UndergroundPaintKing]

@@sharonkirven9570 you’re welcome Sharon I hope it works out for you!

[@GarageNoise]

Great video bother! Keep up the good work!

[@UndergroundPaintKing]

Thanks I appreciate you checking it out!

[@johnnyberlinn1663]

Thanks for the knowledge

[@UndergroundPaintKing]

You’re welcome Johnny I hope the information helps…appreciate you checking out the video!

[@ryanmillsap8645]

Good vid man. Keep em coming

[@UndergroundPaintKing]

Thanks Ryan I appreciate you checking out the video!

[@jayinmi3706]

I just ordered my SprayIt gun kit about half an hour ago, along with a diaphragm regulator and inline water filter. Looking at a compressor side filter from Steel Camel, too. Not sure how I missed this video before...but thanks for the info!

[@UndergroundPaintKing]

Sounds like you’re all set Jay 👍🏾

[@brettwardle4723]

Thanks mate, really helpful. Using my gun for the first time on my minis hatch lid. Pray for me.😄

[@UndergroundPaintKing]

You’re welcome Brett and I appreciate you checking out the video…you got this bro 💯💪🏾

[@vicshonebethel9934]

I appreciate you bro thanks for sharing 👍

[@UndergroundPaintKing]

You’re welcome and I appreciate you checking out the video!

[@BLACKRAIN390]

GREAT VIDEO, IN FULL DETAIL....

[@UndergroundPaintKing]

I appreciate you checking it out Rain💯💪🏾

[@chrishedlund3196]

Thanks. very helpful.

[@UndergroundPaintKing]

You’re welcome and I’m glad the video was helpful!

[@Grant7]

We appreciate you UPK

[@UndergroundPaintKing]

Thanks Grant I really appreciate you bro!

[@fishpony1211]

Yesss found what i was asking for!!

[@UndergroundPaintKing]

Glad the video helped Fish!

[@Will-cl1ve]

Thanks man 👍

[@UndergroundPaintKing]

You’re welcome Will!

[@ahey4]

Thanks for your great tips on the SprayIT as this has helped me out considerably; but on my last run with my epoxy primer the needle started dripping on me and I had to quickly stop what I was doing as apparently the small nut had loosened up and not sure how that happened; but once tighten up no more drip.

[@UndergroundPaintKing]

I’ve run into that problem Don several times but I’m glad you figured it out while spraying primer and not base or clear🙏🏽 I appreciate you checking out the videos!

[@israel9294]

Very good thanks

[@UndergroundPaintKing]

I’m glad the videos are helping Israel!

[@MEVD2011]

You is the ultimate G

[@UndergroundPaintKing]

I appreciate that MEVD🙏🏽💯

[@HackWrenchG]

This is very helpful!

[@UndergroundPaintKing]

Glad the video was helpful 💯

[@redbeacon4871]

Sweet ,thanks

[@UndergroundPaintKing]

You’re welcome, I appreciate you checking out the video!

[@paintittripura]

Love from India, I m also a painter and I learnt from KZbin..There is no Indian youtuber for this type of content. Thanks to you and others youtuber like you for these type of content..I have same gun R500 from aeropro..if you have A608 please make a content on that. Thanks..

[@UndergroundPaintKing]

Thanks Paint It, I appreciate you checking out the video and I’m glad the channel is helpful! I don’t have the A608 but I’ll try to get my hands on one and make some content on it

[@michaelfolchetti4624]

Thanks,MR.UPK!

[@UndergroundPaintKing]

You’re welcome Michael, I’m glad the video was helpful and I appreciate you checking it out 🙏🏽💯

[@MrManushe]

thanks for the lesson

[@UndergroundPaintKing]

You’re welcome and I appreciate you checking out the video I hope it helps!

[@limonbrotherscustoms322]

I just hit the subscribe button brother,thanks for the info

[@UndergroundPaintKing]

Thanks Juan I appreciate you subscribing to the channel and I hope it helps you!

[@hassanqureshi7477]

Lovely bro ❤

[@UndergroundPaintKing]

Thanks Hassan, I appreciate you checking out the video!

[@jamesadams3476]

Excellent video upk on setting up the spray gun. I do have a question do you adjust the fluid output on your gun for different job's. And when you spray clear. Keep them videos coming.

[@UndergroundPaintKing]

Thanks James I appreciate you as always and I actually keep my fluid control the same throughout my whole process and may change up my air pressure or fan pattern if necessary

[@Ram010108]

Another good video.

[@UndergroundPaintKing]

Thanks bro, always good hearing from you!

[@michaelfolchetti4624]

Thanks MR UPK!

[@UndergroundPaintKing]

You’re welcome Michael!

[@nigelthomas1223]

Great job

[@UndergroundPaintKing]

Thanks Nigel I appreciate you checking out the video!

[@suspensefulness]

dope as hell tutorial💯💯

[@UndergroundPaintKing]

Thanks Super Sic-O I appreciate you checking it out and hope it helps 💯💪🏾

[@ricjona1069]

Well done.

[@UndergroundPaintKing]

Thanks Ric, I appreciate you checking out the video!

[@rob12449]

UPK, I'm like #501 and I clicked like within seconds of watching (great intro)! Can't wait to see the rest.

[@rob12449]

You are a very good teacher, not wasting a lot of words but getting the point across! Cool to see a gun I have being demonstrated. I just finished painting my 92 F150 extended cab flare side. Painted in 13 sections over about three years! Crazy I know. But along the way I kept trying new techniques and I'm spraying much better on my last than my early sections. I've had the hardest time figuring out spraying acrylic enamel clear and I'm not using any hardener so far. However I'm considering switching to urethane clear with hardener which I hope is easier to spray. UPK- man it is a lot of work between sanding, masking, and cleaning guns...

[@UndergroundPaintKing]

Thanks Rob I appreciate that and appreciate you checking out the video…one of the main things needed when doing this kind of work is patience which it sounds like you have so I know you’re truck is going to turn out great…going with urethane clear might be a good switch for you or at least give it a try and see if that’s what you want to go with

[@ginfizz20]

Thank you. Very important step I see many painters just spay out into the air to set the gun up.( a little BS---You say your fan is 6-7 inches. Then you hold you hand up to show how far that is; I'm betting that the distance from the tip of your thumb to the tip of your little pinky is closer to 9 inches.🤙) Keep up the good work.

[@UndergroundPaintKing]

Thanks Tom I appreciate you checking out the video 🙏🏽

[@paintaddictionthagreat]

I wish more people knew this ! I had to show someone that has been painting for 20 years to do this ! He swore Sata jet sucked but didn’t know how to look at spray out patterns .

[@UndergroundPaintKing]

Wow that’s crazy that he painted for 20 years and knew nothing about spray patterns

[@paintaddictionthagreat]

@@UndergroundPaintKing all he did was used LPH-400 for a million years and then up grade to a supernova..but before all that he used a LPH 94 model . What he did was one full turn in on everything. He never knew you could look at the spray out if you need more pressure or less or dial in or out . Also he used the gun wash at the job so he never took his guns apart . Like I got a free W-400 because he thought it was broken . It was just extremely dirty . Like he used it for primer and never cleaned it . Them old school painters be like this

[@UndergroundPaintKing]

@@paintaddictionthagreat lol yeah a lot of old school painters are stuck in their ways sometimes!

[@paintaddictionthagreat]

@@UndergroundPaintKing I know this guy right now .. still using siphon feed guns … he’s be like “ young blood , you know any good guns with the cup at the bottom “ ? Can’t tell this man nothing lol

[@UndergroundPaintKing]

@@paintaddictionthagreat 🤣🤣🤣 after that Binks they really didn’t want to fool with anything else…If their getting good results I just let them be great!

[@MQT-]

Thank you

[@UndergroundPaintKing]

You’re welcome MQT!