Upgrades for motobravo hornet

[@integra91ah]

lol.. You take the variator drive face off... squeeze your rear clutch and out the belt in it.. then out the belt on and tighten the vari face back on lol... was funny watching you

[@dragon60651]

2SHAYNEZ do you know how long ago this was, at this Point i got every upgrade you can think of and thanks keep viewing

[@integra91ah]

Law Lee I'm just giving you hell man. lol was funny is all. I'll be getting one or maybe a ice bear 125. if I get a Roma its getting a taida rebuild for sure.

[@dragon60651]

I got all of that but let me tell u get the roma cause you can drop a 63mm kit in and no boring the crankcase but make sure the cylinder diameter is below 65.5mm 65.mm

[@integra91ah]

Law Lee gotcha. Where you purchase your kit (brand)? come with a big valve head and cam? domed piston ? what size carb you running and jet ?

[@dragon60651]

Go on ebay and do some searching there are alot of kits on ebay

[@Astralpilot2050]

your spacer in sitting by the forks on right side.

[@JacktownReese]

What size belt Ik it’s 835 20 30 but what’s the actual size

[@dragon60651]

I believe that is the actual size

[@dragon60651]

Or you can use 842 20 30

[@dragon60651]

yes I have 2 other videos and besides the air filter check out the other video I have describing the other mods I got but start off little at a time wat ever you want to work on first I started with the performance CDI, spark, and coil first and air filter

[@bocard80]

law do you feel or notice a difference in performance after these mods

[@dragon60651]

Yea I did, my acceleration went up but maybe nex year imma do a 61 mm big bore for more power I got a 58.7 big bore in it now to make it 155cc right now

[@bocard80]

+Law Lee I am really feeling this bike. everyone's trying to talk me out of buying one. in your opinion do you think it's worth it? I really want one but do not want to worry about its reliability or life span.

[@bocard80]

+Law Lee .

[@Ancient_Serpent]

If you don't know how to work on gy6 engines and is not mechanically inclined don't get it things will break for sure and you need to upgrade alot of different parts because of it I have 2 Honda ruckus gy6 150cc swapped been doing it about 4 years so far

[@TTV_Shabado]

I have the same bike scooter. I want to put a big bore kit on it. Can you help me out in finding the right one that will fit

[@dragon60651]

barry hicks check out my other video that talks bout the upgrades I have

[@gBoogieDaBoogieMan]

I need your help so bad fam I have this same bike I just spent $400 in repairs 2 weeks ago and it’s still not right, they said it doesn’t have the same compression because my bike is over 3000 miles it’s at 3300 miles.. do you know what I can do about it?

[@dragon60651]

How the hell they going to tell you that take your money and not fix the damn problem, get a big bore kit just get a 61mm kit for it and an oil cooler, I have other videos check them out

[@dragon60651]

Your cylinder may be scourged, meaning piston rings worn and scratched the side of your cylinder, lost of compression

[@gBoogieDaBoogieMan]

Draco Law How can I fix it or repair it or replace it

[@dragon60651]

@@gBoogieDaBoogieMan you would have to have the cylinder honed or just get another cylinder, and not to mention get another piston and piston rings

[@gBoogieDaBoogieMan]

Draco Law www.amazon.com/dp/B07PP811N7/ref=cm_sw_r_cp_awdb_t1_N26TCb5SWPH8Q this one?

[@Astralpilot2050]

deAMN

[@evermoremedia8020]

hey i just got my roma 150cc back running again and im going to start mods on it. im starting with the air filter, what do you recommend first in order to make it stretch its legs? also do you have anymore videos for us? haha

[@dragon60651]

I have another video describing the mods, I started off with performance CDI, spark and coil, and air filter first

[@evermoremedia8020]

yeah ive watched that. ive done the CDI, the ignition coil, a new turbo fan and air filter. She doesnt seem to be as quick off the line but her top speed has increased.

[@dragon60651]

Ok now if the funds are available upgrade to performance exhaust, 30mm carburetor, and try to get lighter roller weights and you should see a bigger difference

[@evermoremedia8020]

the exhaust is pricey. i just had the carb replaced when the bike was taken to a shop. i wished i would have started learning about it myself, because two days after it got back i realized i could have fixed it myself. so ill do lighter roller weights. hey is the engine head 2 or 4?

[@evermoremedia8020]

also what weight of roller weights did you get ?

[@charlesdwilson2112]

Subbed. I got the Tao Tao Powermax VIP 150cc 157QMJ and have been upgrading it. Top speed so far was 65 MPH (GPS) and man it is fun. I want to order one of these to build next and have some fun with. People look funny at me while I pass them rolling down the highway but it does the job. Me :Hornet next on list and going to get it to 75-80 mph (GPS) I feel it can be done. What gears has the rear got in it? I know there are plenty out there to up the game with. Salute 07

[@allgasnobrakes4979]

we're can a buy a motor scooter like that I live in Ohio area

[@dragon60651]

Donte Coleman try online they have alot of different sites ib live in Chicago and thru have a shop here and i got mine locally

[@jessicaallen5411]

Law Lee what state are you in

[@dragon60651]

Jessica Allen illinois Chicago