v8 240z datsun rat rod build up, junkyard rescue rotsun evil twin thrash part 2 lsd 4 speed

sneaking a transmission through the airport, installing a budget hydraulic throwout bearing and a cheap Limited slip in the long nose r200 differential. rotsun has an evil twin and its coming alive.

[@backseatdriver3898]

The hotrodding you do on here is second to none. Good luck with the family.

[@RetiredTony]

the ONLY beast i've seen is that bad ass Firebird bro! haha...great video man. Good luck on your trip to California and hope your wife and kids are well buddy. you guys are in my prayers man.

[@InvincibleExtremes]

Retired Tony 1970 yup. That firebird is no joke. Planning on giving it some love too once I get the chance. Hope all goes well, thanks.

[@120ElBdo25]

There's just no way that car could look more badasss, i want a car like this so much

[@InvincibleExtremes]

It getting even more badass little by little... one step at a time.

[@rodneysrepurposingrecyclin3821]

You guys are in our prayers. A friend of ours soon has half a heart. He is 5 years old has a surgery every year or so for the first 16-18 years to replace, or repair valves am such. I'm really not well versed on it all, but you annnnnnnd your family are in my prayers. Digging the car.

[@InvincibleExtremes]

Rodman Lyons thank you. I joined my kids today in San diego, they are excited about the datsun.

[@rodneysrepurposingrecyclin3821]

Invincible Extremes Muscle Cars Garage yes sir. You're very welcome. Enjoy time with toy family

[@InvincibleExtremes]

Rodman Lyons will do thanks.

[@jamalmansour3828]

A Quick recovery for baby Luke.....All the prayers for your Family.Good luck with the contest.

[@InvincibleExtremes]

Jamal mansour thanks!

[@Jojobeat5]

Had to rewatch this again, love those flames and the mountain side. Take care brother

[@SpaceShipDeathstar]

The Rubber God is burning for you. :) You and your unstoppable drive are one of the most important inspirations to my little broken heart.

[@InvincibleExtremes]

SSDeathstar thanks!

[@timmycaudill5338]

You sure can drive! The 360s are impressive!!

[@InvincibleExtremes]

Timmy Caudill all in the name of reliability testing. ;-) thanks for watching.

[@oldcoinchaser8723]

Good bless you and your family my friend. Baby Luke will be fine. He's going to be a miracle baby. Stay safe on your travels.

[@InvincibleExtremes]

Old coinchaser thats what we're praying for. Thanks.

[@joeyperry705]

OMG. Way better than roadkill's rotson. Awesome video bro.

[@InvincibleExtremes]

Thanks! Many changes are coming, this car is getting a lot of improvement soon. Thanks for watching

[@michaelsaywhat6980]

Sneaking all those parts through the airport was hilarious! After all those hard work and headaches---donut time! Don't know how I stumbled upon your video, but glad I did. Your Z is a growler !

[@InvincibleExtremes]

MichaelSayWhat after donuts I drove it a thousand miles down to San diego... I daily drive it here now. Thanks for the kind words

[@michaelsaywhat6980]

Trying to find you guys on the sfac page and vote but I don't your guys entry.

[@InvincibleExtremes]

MichaelSayWhat it's in the garage category, voting begins Jan 5th, I have a picture of my 69 charger with a red stripe on it...

[@InvincibleExtremes]

MichaelSayWhat last I looked, I was on the 1st page by number of views

[@michaelsaywhat6980]

Ok, Noted. Wish you guys the best of luck! :)

[@d4rkhound388]

Man if i ever come to the US for an extended holiday you can bet i am taking some notes out of your book and have an almost mad max adventure, I hope that in some way shape or form i get to see this go head to head with the Rotsun. Great video man.

[@InvincibleExtremes]

D4RKHOUND maybe one day we can arrange something with roadkill. Those guys tend to be very busy, so who knows

[@FriscoBoatersGarage]

Man... love your stuff and you guys are in my prayers. I love your channel and what you put into it. You remind me of when I was hitting it hard. Keep it up bro!

[@InvincibleExtremes]

FriscoBoater thanks! Hoping for the best.

[@QQTrick1QQ]

Congradudolences. Sending wishing wells your way. I have a feeling the Hotsun will pass anything except a tire store. Good chance to make some connections in the city, Maybe put a ad on craigslist for a mobile mechanic, charge 2 tires per hour.

[@InvincibleExtremes]

QQTrick1QQ yeah who knows, I'll see what I can find.

[@CerebusTV]

Good tech article on hydraulic throwout conversion!

[@InvincibleExtremes]

CerebusTV just trying to help people out.

[@thebadassbuickfromcamrose8541]

This video is awesome ... Makes want a Dustun

[@InvincibleExtremes]

the bad ass buick from camrose they're fun for sure.

[@bigpatmo]

Prayers for you and your family.🙏🙏🙏

[@InvincibleExtremes]

big patmo thanks!

[@AZgule2010]

Prayers for baby Luke and family my brother.

[@InvincibleExtremes]

Edin_AZ thanks

[@baxrok2.]

Epic build and thrashing. Wishing you all the best with your child.

[@1stTactless]

Awesome Video - Great build

[@InvincibleExtremes]

1stTactless thanks!

[@FOOKYOUTUBENUMBERS]

Hope you all end up happy stay strong bro GOOD LUCK VLAD

[@InvincibleExtremes]

Woke Up thanks!

[@jhuntosgarage]

All the best buddy. I'm sincerely hoping everything works out for the best.

[@InvincibleExtremes]

J. Hunto's Garage thanks! Same here.

[@xicano001]

My prayers for you and your family.

[@InvincibleExtremes]

Thank you

[@stude1953]

Meant to ask you in those other videos what mountain was that in the background of the burnouts? Simply breathtaking! Funny none of the passing cars dialed 911 that there was some nut going insane and driving around in circles!! lol So sorry to hear about Luke. Hoping for the best my friend.

[@InvincibleExtremes]

stude1953 they can't! No cell reception. This is the back woods of Oregon. Great place to be.

[@retromotivegarage753]

Cool build. Great info. Best of luck in California.

[@andrewwilson8317]

Car looking good, in a mean kinda way. A four pinion diff is a great upgrade. I have machined and fitted them from Toyota SUV axles. They tough,have limited slip or locker and can stand all the abuse you could ever dish out. Well maybe not you!

[@InvincibleExtremes]

Andrew Wilson I'm putting in a ford 8.8 diff later down the road, so I have no plans on replacing the r200. Except for maybe getting a stronger carrier... the 2 pinion shaft is the only real weak link on those things.

[@El_Chompo]

That car is so fucking badass

[@InvincibleExtremes]

+sirgallium thanks!

[@rasputian2010]

That's some Dubai driving right there bad ass.

[@InvincibleExtremes]

Jeremy Pace thanks!

[@yomisco]

hope every is going to be all right, is hard and painfull but at the end its makes the couple stronger

[@InvincibleExtremes]

yomisco thanks, hope so too.

[@michaelvecchiarelli8414]

good luck my friend and i hope you win.my thoughts and prays are with you and your family. mike elcamino

[@DANTHETUBEMAN]

that doughnut sesh it 2b properly saluted ;)

[@InvincibleExtremes]

DANTHETUBEMAN thanks!

[@ufo-bro532]

awesome brother keep up with your new vids 👍

[@thewerxshop0486]

Nice video! Only thing I didn't like and I understand why you went that way is the hydraulic clutch. I've had a few slaves go out and leak on the clutch at which point it's a new clutch. I prefer mechanical because of that issue. If a mechanical fails you replace a broken part and go on about your business. Don't get me wrong I LOVE the ease of a hydraulic clutch, but when that slave leaks on the clutch and you have to spend a lot more than you would to replace a broken linkage it's a deal breaker for me. Love the video and keeping you guys in our thoughts.

[@InvincibleExtremes]

The Goat "One Piece at a Time" it's not an option for a datsun. Plus this isn't the final resting place of that engine. So having a flexible hose makes it easy to move the engine to the rear when I'm ready to do that. Mechanical clutches require the engine to be where it is and so on... And it'd be way more expensive for me. A $50 clutch disc isn't a deal breaker for me at this point.

[@lobmin]

YES! I can see it now, _The Rock-Crusher Datsun_

[@InvincibleExtremes]

lobmin that's actually a really good idea...

[@ramvanbobby3889]

good luck brother

[@InvincibleExtremes]

RamVan Bobby thanks!

[@78heloman]

Awesome videos!!! I believe that's the same Speedway hyd throwout bearing I used on my last project, 5.3/T18 CJ-7, I was a little shocked to read in the directions that you're NOT supposed to leave any clearance so the bearing isn't constantly spinning, did you notice that? Totally backward from any other throwout bearing! I have no expectation it's going to last very long, but I've been beating the shit out of it all summer and it's been fine so far...

[@InvincibleExtremes]

78heloman yeah, I wasn't about to have that, so I ignored the instructions and did what I need for it to survive.

[@russellfheim]

Hit me up when your in San Diego, if you want to talk, and have a beer.

[@InvincibleExtremes]

russellfheim thanks, I don't drink but I'm wouldn't mind saying hi.

[@StealthyWolfDaddyWerewolf]

You shot fireballs at 17:53

[@InvincibleExtremes]

+Stealthy Wolf yup!

[@oscaralvarado2899]

Baby Luke will be ok.

[@InvincibleExtremes]

Oscar Alvarado that's what we're praying for, thanks.

[@breykruskie4678]

Where’s the firebird at man?????? And I hope everything goes good for you and your family

[@InvincibleExtremes]

Brey Kruskie it's in nebraska In storage. Hope all goes well too, thanks.

[@korbun3235]

Invincible Extremes Muscle Cars Garage Why is it in storage

[@InvincibleExtremes]

korbin varney because I'm currently working on getting the datsun ready to race. Just drive 1000 miles with it down to San Diego. Going to race it in january.

[@xozindustries7451]

Cool ride, I'm wondering why you didn't move the motor and Trans back more and use. A smaller distributor that way better weight distribution and no monkeying around with the shifter location

[@InvincibleExtremes]

Thomas Cahill because right now it has an aluminum driveshaft that's the perfect length. My plan is to lower and move the engine more to the rear, BUT only after I swap in a ford 8.8 which is shorter than my current datsun diff. See? I'm a penny pincher with a plan... That way I keep my aluminum driveshaft, just move the entire drivetrain back to make everything work.

[@xozindustries7451]

Invincible Extremes Muscle Cars Garage 8.8 IRS or solid rear axle?

[@InvincibleExtremes]

Thomas Cahill 8.8 irs

[@frankvipari4944]

It would be nice to see the 69 Charger on the road I hope that you do it GOOD LUCK

[@InvincibleExtremes]

Hopefully soon.

[@2litrepeter.]

All those sixteenths... Think I'll stick with metric. Agggghhh 😎

[@InvincibleExtremes]

FlatBlackRat yeah, that's definitely easier.

[@antoniomao6830]

Great intro!

[@remedyz1568]

I have found it impossible to get that lady conversion into my r200. How did you pinch the part to get it started?

[@InvincibleExtremes]

Remedy Z you have to polish the spider gears a bit. They don't just go in. Dunno if you caught the difference between the factory gears and the sanded ones. Besides that, using a clamp helped get the tip in... after that I carefully had someone hammer them in while I held on for dear life.

[@caubichon1]

As the clutch wears the fingers come away from the engine, no? You might find it engaged all the time after some wear with no way to remedy short of removing more shims

[@caubichon1]

Ha ha watched it all the way you nailed the clutch distance

[@InvincibleExtremes]

caubichon1 yeah, mine has a bit of a gap, so the tiny margin of finger movement shouldn't hurt me too much. But that is a very good point I hadn't considered at the time, I just made the gap bigger just because ...

[@SilenTsGunzz]

great video as always man! i have a question for anyone that can answer lmao.. is 2500 a god price for a 280z with a blown motor? paint is rough, interior is damn near perfect and its been sitting for 10+ years.. i have a 350 chevy bored out and cammed, thats why it doesnt bother me that the engine is blown. any help is appreciated. Its my goal to own one i just dont know the market so i cant judge on good or bad prices...

[@InvincibleExtremes]

Gunzz honestly that's a $1,500 to $2,500 car depending on rust... It's worth it, BUT anything after 1975 is going to be a pain with emission regulations in some states. Great cars though, either way you won't regret getting one of the body is solid. If it's not, then offer a little less.

[@SilenTsGunzz]

thanks for the reply! The only rust is where the paint chipped off, a little on the fenders and on the hood. its been sitting in a shed for the 10 years it hasnt ran. The area in colorado im in there are very loose regulations on emissions. There is a law around here that you HAVE to swap an engine thats either the same year or newer. I pulled the engine out of a 74 blazer so theres a problem with getting a z car thats older than a 74.

[@InvincibleExtremes]

Gunzz well that sucks... thing is though, how would they know? A chevy 350 Could be from a 68 blazer too. Same casting number

[@SilenTsGunzz]

Thats True! My neighbor is selling one for 500 in the same condition as the 2500 dollar one.. ill probably get that one lol, thanks for letting me know man, you saved me alot of money

[@InvincibleExtremes]

Gunzz yeah, I would have bought the $500 like yesterday

[@TheMrShinagami]

That thing is a beast, It's WAY better than the Rotsan on Roadkill! What happened to the Supra you had? My thoughts and best wish's are with you, your family and Baby Luke. Please let us know how he is.

[@InvincibleExtremes]

TheMrShinagami I still have the supra. I'll be working on it whenever I'm in Hawaii. It's not in Oregon so I'm working on the cars I have here.

[@TheMrShinagami]

I'm afraid I cant register to vote for you. Champion don't seem to think the world outside of America and Canada exits :-(. I hope you win anyway.

[@InvincibleExtremes]

TheMrShinagami hey, whatever works.

[@sonofperdition1719]

yup.. that's how you break in a car👍😕

[@InvincibleExtremes]

Definitely

[@dangerousfreedom4965]

Good job, how much more would a T56 be to install?

[@InvincibleExtremes]

Too much. And the diff and axles would still be weak. So I designed a system to bolt in a 2015 mustang diff, hubs and cv axles. Stock or aftermarket high end. Hoping to have it for sale soon.

[@InvincibleExtremes]

It would allow me to run a 3.31 or 3.15 rear gear and keep a heavy duty ford 4 speed or a Chevy one if I want in it.

[@rockie221]

I don't see the link you speak of. Do you live in Estacada or Portland ? the burn off's were on the upper Clackamas but it looks like you were driving on 205 near Foster

[@creeker81]

I seen flames!! Lol

[@InvincibleExtremes]

Sterling Archer yup, every time I let off the throttle. Freeway launches are pretty wild...

[@rustyrods8535]

Your going to need a deal from a tire company . I've used a lot of Speedway parts over the years and never been disappointed with any thing I bought . GPS speedometer would help ?

[@ldnwholesale8552]

Which is rustier? The Rotsun or this one.

[@InvincibleExtremes]

LDN Wholesale I've seen the underside of the rotsun, it's solid structurally, but the hatch is rotten... Mine has a solid hatch but the frame rails and everything else have giant holes. Once I fix the rust here in San diego it'll be more solid.

[@HeadFlowInc]

Lord touch Luke’s heart and make it whole amen 🙏🏻

[@novoiperkele]

You have a leak on your exhaust manifold gasket..

[@InvincibleExtremes]

novoiperkele yup, a huge one

[@rayflower1915]

Where is it recorded.....?

[@InvincibleExtremes]

Hassan Moussie back woods of oregon.

[@rayflower1915]

thx dude, appreciate it

[@MrPerrells]

Just ragging the life out of that thing.

[@InvincibleExtremes]

MADMIKE808 "reliability testing" ... drove it 1,000 miles the next day

[@GamingTechReview]

that was me driving at 20:19

[@InvincibleExtremes]

+GamingTechReview yup

[@WaynesGarage]

Not gear box mate we have the same ones over here as well not a very strong box but good the the daily driver

[@InvincibleExtremes]

Wayne's Garage the muncie? People love them. I prefer the ford toploader but this muncie was a direct replacement for the auto and it's light and can be built to handle 800hp no problem.

[@WaynesGarage]

Yeah mate thats true i just think that most over here just give them to much power to handle sometimes

[@InvincibleExtremes]

Wayne's Garage that's very true. I wouldn't trust it over 400 hp as is. And 5,000 rpm clutch dumps prob aren't good for it.

[@WaynesGarage]

No mate thats what alot of the youger guys here do with them dumping the clutch and yeah that kind of thing can hert them a lot but we all have to learn some how lol

[@InvincibleExtremes]

Wayne's Garage yup live and learn.

[@HeadFlowInc]

#exhaustleaks

[@Mcleod0000]

those things are so bloody light , like 2200 pounds or something ?

[@davidhammond6926]

Mcleod0000 about 3,000 with original motor and full interior.

[@InvincibleExtremes]

+David Hammond 2400 or so. I'll get it weighed and let you know for sure, but that's what this was with an auto... And the manual is lighter

[@davidhammond6926]

Nice. That's about what the 260z my brother and I put together with a 327/th350 ended up weighing as well