Valeton GP 200: how to build a preset, signal chain management

in this we will share how to build a preset with the Valeton GP 200. While making the preset we will also discuss how to change the order of the blocks in the signal chain, ow long does it take to change a preset, how to assign the expression pedal to the wah wah, how to work together with patch mode and stomp mode, etc. So I hope you enjoy and please don’t forget to subscribe and ring the bell, as it would really help me to make more videos like this!
▶💽 Link to a playlist of my songs: • Leo Gibson Songs
▶🎸🔉 If you are interested in my IRs, please follow this link: www.leogibsonguitar.com/shop-...
▶🎸🔉 If you are interested in my Kemper Profiles, please follow this link: www.leogibsonguitar.com/shop-...
Link to DistroKid with 7% discount for you: distrokid.com/vip/leo
--------------------------------------------------------------------------------------------------------
OTHER VIDEOS:
▶ Pedalboards demo review:
Ampero Stomp II demo review: • Ampero Stomp II: demo ...
Fractal FM3 demo review: • Fractal Audio FM3: Dem...
Neural DSP Quad Cortex Demo Review: • Neural DSP Quad Cortex...
Neural DSP Quad Cortex Unleashed: • Quad Cortex Unleashed:...
HeadRush MX5: • Headrush MX5: Demo and...
NUX MG 30 demo review: • NUX MG 30: Demo and Re...
Pedalboards Latency: • The most extensive amp...
Kemper Stage demo review: • Kemper Profiler Stage ...
Valeton GP 200 demo review: • Valeton GP 200: demo a...
Valeton GP 100 demo review: • Valeton GP 100: demo a...
POD GO demo review: • LINE 6 POD GO: Demo & ...
Zoom G11 demo review: • Zoom G11: Demo and Rev...
Zoom G6 demo review: • ZOOM G6: Demo & Review...
NUX MG 300 demo review: • NUX MG 300: Demo & Rev...
Mooer GE 300 lite demo review: • Mooer GE 300 Lite: Dem...
Mooer GE 250 demo review: • Mooer GE 250: Demo & R...
Mooer GE 150 demo review: • Mooer GE 150: Demo / R...
▶ Modeling pedalboards comparison videos:
Valeton GP 200 vs Line 6 POD GO: • Valeton GP 200 vs Line...
BOSS IR 200 vs STRYMON IRIDIUM vs AMPLIFI FIREBOX: • Boss IR 200 vs Strymon...
HeadRush MX-5 vs NUX MG-30: • HeadRush MX 5 vs NUX M...
HeadRush MX-5 vs POD GO: • Headrush MX 5 vs Line ...
HeadRush MX-5 vs Ampero: • HeadRush MX 5 vs Hoton...
HeadRush MX-5 vs Mooer GE 250: • HeadRush MX5 vs Mooer ...
Quad Cortex vs Fractal FM3: • Neural DSP Quad Cortex...
Quad Cortex vs Fractal FM3 - effects comparison: • Neural DSP Quad Cortex...
Quad Cortex vs Helix: • Neural DSP Quad Cortex...
Quad Cortex vs Kemper: • Neural DSP Quad Cortex...
NUX MG30 vs Mooer GE 200 vs Ampero One: • NUX MG 30 vs Ampero On...
FM3 vs Kemper vs Helix vs Pod GO vs NUX vs Valeton vs Mooer vs Soldano: • FM3 vs Kemper vs POD G...
NUX MG 300 vs Valeton GP100 vs Mooer GE 150 vs Harley Benton DNA: • NUX MG 300 vs Valeton ...
BOSS GT 1000 core vs HX Stomp: • BOSS GT 1000 core vs L...
Zoom G11 vs Mooer GE 300: • Zoom G11 vs Mooer GE 3...
Fractal FM 3 vs Kemper Stage: • Fractal audio FM 3 vs ...
POD GO vs GE 250: • Line 6 POD GO vs MOOER...
GT 1000 vs Line 6 Helix: • BOSS GT 1000 vs LINE 6...
Line 6 Helix vs Headrush: • Line 6 HELIX vs Headru...
GT 1000 vs GT 1000 core: • BOSS GT 1000 vs GT 100...
GT 1000 vs FM 3: • Fractal FM3 vs BOSS GT...
GT 1000 vs HEADRUSH: • BOSS GT 1000 vs HEADRU...
GT 1000 vs GE 300 vs HELIX vs HEADRUSH vs PLEXI: • GT 1000 VS GE 300 VS H...
GE 200 vs GE 250 vs GE 300 vs GE 150: • MOOER GE 150 vs GE 200...
GE 250 vs Hotone Ampero: • Mooer GE250 vs Hotone ...
GE 250 vs HX Stomp: • Mooer GE 250 vs Line 6...
GE 250 vs Gigboard: • MOOER GE 250 vs HEADRU...
GE 200 vs Ampero One: • Mooer GE 200 vs Ampero...
HX STOMP vs GIGBOARD: • LINE 6 HX STOMP vs HEA...
GE 250 vs GE 300: • MOOER GE 250 vs GE 300...
GE 150 vs ZOOM G1X Four: x • Mooer GE 150 vs Zoom G...
GE 250 vs Ampero vs HX stomp vs GigBoard vs JCM 800: • GE 250 vs AMPERO vs HX...
BIAS AMP 2 VS AMPLITUBE 4 VS SOFTUBE VS FORTIN vs PLEXI: • BIAS AMP 2 VS AMPLITUB...
GE250 vs HX STOMP vs GIGBOARD vs IRIDIUM vs Fender DLX Reverb: • GE250 vs HX STOMP vs G...
-------------------------------------------------------------------------------------------------------
⏰Timecodes:
#ValetonGP200 #GP200 #GP-200

[@rakeshuvobd_ctg8924]

Some heroes don't wear capes! They upload these videos & speak a in a sexy accent!! Thank you so much ❤

[@LeoGibsonGtr]

😀 Thank you so much, I'm really happy that you appreciate the video and the accent!!!

[@nickpapagiorgio8038]

Thanks for the video! These are very helpful for those who are new to the Valeton GP 200 as well as beginners who are not only learning about pedals, but also learning on a more complicated machine like this (even though it is fairly straightforward). Keep up the good work!

[@LeoGibsonGtr]

Thank you Nick, I'm really happy to have been of some help!!!

[@goodie2shoes]

you deliver, Leo! No nonsense and very practical! Many thanks and blessings from a new gp200 user!

[@LeoGibsonGtr]

Thank you so much, I'm really happy to have been of some help!

[@zepp3lin]

Thank you, Leo, you're the only guy that does an extensive review and setup of the GP200 while the rest are just unboxing and testing factory presets. Got mine last week and in my opinion, it's a good buy, the sound that I get from the GP200 using my own setting is awesome in my opinion. But I use my own IRs too.

[@LeoGibsonGtr]

You are welcome, and I'm happy to be of some help!!! Yes, the possible to use our favourite IRs is awesome...and contribute a lot to the final result!

[@786itube]

Yes- you’re right.Though it may be worth checking out Krach Werk who does s decent job at setting up the GP200

[@telefan2]

Leo thank you, just bought this peel and the two settings you just demoed would be just about all I need. I’m not great with menus so that is just what I want👌 great pedal for me. Thank you !!

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!!!

[@tjbitt65]

Thanks for a great video Leo. Just got my GP200 and built my first couple patches today A bit of a learning curve, but once you have it down it's easy-peasy.

[@LeoGibsonGtr]

You are welcome and thank you so much for sharing! Yes, I do agree... Thank you!

[@horseyman1957]

It helped me thanks. It took me a little fiddling to understand what the User mode did and how to set it. But once I did I could see that it could open up a lot of flexibility in how I set up a particular song. Thanks again!

[@LeoGibsonGtr]

You are welcome, and I'm happy to have been of some help!

[@tometal]

This is one of the most comprehensible tutorial. Hope I can get one of these soon!

[@LeoGibsonGtr]

Hi, thank you so much! I'm happy that you find the tutorial useful!

[@themicdfiles1865]

I just got one of these and I'm a technological nightmare. This video was very helpful. I am happy with the GP-200 but I knew there were things I was missing about the functions. Thank you very much for the information!

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!!!

[@martinhunter8777]

I have to agree with many others - a great video, showing a novice how this actually works and can be used to explore what is the difference between a plate and any other kind of reverb etc. It’s help me make up my mind to get one. Thanks very much

[@LeoGibsonGtr]

You are welcome and I'm really happy that you have appreciated the video!

[@cpamiseso]

Sir! This is very precious, I'm a manual book kind of guy, but this video would surely helps me a lot in the start of using it. Thank you very much.

[@LeoGibsonGtr]

Thank you so much, I'm happy to have been of some help!

[@alphajoel2k9]

Cheers Leo! 😁 Litterally spent a whole afternoon not understanding half the things i read/watched and you solved all my confusion in 1 video! 🙏

[@LeoGibsonGtr]

Thank you so much Joel, I'm happy to have been of some help!!!

[@jad547]

Thanks Leo, Your detailed videos help me so much, and I am sure many others, in making gear decisions and operation of equipment.

[@LeoGibsonGtr]

You are welcome, I'm really happy to be of some help!!! Thank you for letting me know!!!

[@sabbathkennedy]

Just bought this unit.. And this came at perfect timing..thank you a lot leo..

[@LeoGibsonGtr]

You are welcome, I'm happy to have been of some help!

[@crabbybastardguitars9955]

Thank you for doing this video. The manual didn't make much sense to me but your video sure did. Great job !!!

[@LeoGibsonGtr]

Thank you so much, I'm happy that you like the video!!!

[@samharper5106]

I applaud this video 🎉 i just bought this and had no idea how to use it but this is extremely helpful 👍

[@LeoGibsonGtr]

Thank you so much, I'm really happy to have been of some help!!!

[@fabianocreation]

Thank you Leo, It was very helpful for me beginning in the world of valeton 🙏🙏🙏

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!!!

[@otysee6183]

Awesome - you are a lifesavior . Big fan of your channel. Please keep up the great work

[@LeoGibsonGtr]

Thank you so much, I'm super happy that you like the channel and to have been of some help!!!

[@TheNCGardener]

Thank you for this video on the gp200. We need more videos on this unit please!

[@LeoGibsonGtr]

Hi, you are welcome and thank you for your suggestion!

[@kens.5095]

Gotta say this was by far the most useful video I found for this device. I do my editing on the board because I still can't get the software to work for me. Ugh. Thanks, Leo!

[@LeoGibsonGtr]

You are welcome and I'm happy that you appreciate the video! I hope you will solve the problems with the sw!

[@sightsinging101]

Big thanks 🙏 This was my first pedal period lol and you really made it easy thanks again 🙏💕

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!

[@sam-co4lx]

Top and many Thanks. I Love your Videos about the Valenton GP 200.

[@LeoGibsonGtr]

Thank you so much!!!! I'm super happy that you like the videos!!!

[@suhnrais]

Great video. That really helped me understand the basics. Thank you very much!

[@LeoGibsonGtr]

You are welcome, and I'm happy to have been of some help!!

[@786itube]

Excellent presentation once again, Leo. Most helpful as I learnt a lot

[@LeoGibsonGtr]

Thank you so much, I'm really happy to have been of some help!!!

[@picksalot1]

This unit reminds me of my old Boss GT-6, which also has a lot of buttons a knobs. But, the large Display, and improved navigation surely makes the Valeton a much easier and friendly floor unit to use.

[@LeoGibsonGtr]

Hi, thank you for sharing!

[@MC-cl9ip]

Thank you Leo. Another great video. Much appreciated!

[@LeoGibsonGtr]

You are welcome and I'm really happy that you like the video!!!

[@TypeoS]

Thanks for this video it helped me out a lot, the last digital guitar unit i had was a digitech rp300, things were way simpler to figure out back then. Lol

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!!!

[@calebcadainoo]

Wow thanks for this really needed it got my board now will try this out😉

[@LeoGibsonGtr]

You are welcome, I'm happy to have been of some help!

[@jaywhite3186]

Excellent tutorial. Thanks for the help.

[@LeoGibsonGtr]

You are welcome, I'm happy to have been of some help!

[@vladimird5280]

Love this pedal, the first one was great yet alone this one

[@LeoGibsonGtr]

Hi Vladimir, thank you for sharing!

[@Mb-dw3ds]

Got one today and this really helped thank you!

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!!!

[@marcuslutz]

Nice tutorial. Thank you very much for sharing.

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!

[@AF-lq7qg]

Thanks a lot! Just received it and I was lost with all the settings!

[@LeoGibsonGtr]

You are welcome and I'm happy to have been of some help!!

[@tonysurfguitar7374]

II think it´s an outstanding tool for many gigs. Even professional gigs in professional places. I think it´s just a question of sitiin´ enough time to improve patches, settings, and try to really know that incredible tool. As far as I´m concerned, I think you don´t need 690 amps and 79.000 effectc to have a good sound. One more time, You´re my hero, Mister Leo. Waiting for some new videos. Thanks again for your time, your info and your passion. Salute, amico. Ci vediamo.

[@LeoGibsonGtr]

Grazie 1000 Tony, both for sharing your opinion and for thence compliments!!!

[@MrCahouette]

Great review, you help me so much !

[@LeoGibsonGtr]

Thank you so much, I'm happy to have been of some help!

[@nerdicesdomakael]

Awesome tutorial man. Thanks

[@LeoGibsonGtr]

You are welcome, I'm super happy that you like the video!!!

[@jcoulter43]

Sounds really good. Appears to be fairly easy, once you understand the UI layout, to edit and create patches. The patch switch delay time is not bad. I think Valeton got a lot of things right on this unit. If they implemented Bluetooth app control (similar to Firehawk FX) and more IR banks this would be the POD Go killer. To some people, it may be that already. Great video as usual Leo. God bless and rock on 🎸👍😎

[@LeoGibsonGtr]

Hi, thank you for sharing...yes, Bluetooth would be could...I think IRs are enough, but I can understand that someone needs more...good points... Thanks!

[@kisakyky182]

@Leo Gibson I need 2 channels, clean and overdriven, with and without effects, on occasion. My Vox VT20+, which is very many years old, switches from a clean channel to an overloaded one in one song - without delay. Valeton GP200, judging by the review, does this with a terrible and very noticeable delay. I was ready to buy it, it's a good thing I didn't! Thanks!

[@LeoGibsonGtr]

Hi, you are welcome and thank you for sharing your opinion

[@clouds5]

I got a GP200 for Christmas (great deal!). The preset switching is absolutely fine, but I'm missing a global tempo or auto save feature. If you switch presets and go back to previous one, tempo and effect settings are always back to default. Which is great if you want it that way, but it would be nice to have the option to change it. Especially in a live setting.

[@LeoGibsonGtr]

Hi, thank you for sharing! Good point....I didn't notice it....I have to try.... Thanks!!!

[@AmishMutantPower]

Great video Leo!!! Thanks a lot 💪😃

[@LeoGibsonGtr]

You are welcome and I'm super happy that you like the video!!!

[@AmishMutantPower]

@@LeoGibsonGtr 💪😉

[@steveclark9934]

Thank you Leo.

[@LeoGibsonGtr]

You are welcome!!!

[@landslug]

This is very cool. I use the control buttons normally, with four patches in each bank but this gives me the idea of having two patches in a bank and using the right side buttons as four stomp boxes. This is a very cool unit that does a lot. Thanks!

[@LeoGibsonGtr]

You are welcome and thank you for sharing!

[@GuitarMeOfficial]

Hey Leo! Can you please make a video showing the midi capability's of this unit?? Rock on dude you are awesome!

[@LeoGibsonGtr]

Thank you so much!!!! Yes, it's a good idea...I need to find the time to do it...

[@gauravlama2079]

Sounds good and it’s a good unit for gigs, the only thing I didn’t like about it was the scenes it had a audio gap switching between scenes. If it was seamless then this would be on the top for giging for low budget. I hope that they improve the scene feature in the future with no audio Gaps

[@LeoGibsonGtr]

Hi, thank you for sharing! Yes, scenes would be highly appreciated in the Valetone Line up

[@aboxyx7]

Thanks, very helpful, you da man.

[@LeoGibsonGtr]

You are welcome and I'm really happy that you appreciate the video!!!

[@earon1609]

Thanks for the video, Leo! GP-200 looks and sounds very interesting, especially for that price. Could you also show us how to use external connection via fx-loop? It would be very nice. Cheers ☺️

[@LeoGibsonGtr]

Hi, thank you for sharing...maybe in a future video! Thank you!

[@pappupatel8398]

Very nice video bro ..how to do ping delay stereo ?

[@johnfleet1854]

This is great thank you ! Do you know where I can find the input level settings for PRS or Fender guitars so I can dial them in ?!

[@LeoGibsonGtr]

Hi John, thank you so much and I'm happy that you like the video! I have check out the user manual and in the global setting --> input level, you should be able to do what you asked for. Thank you!

[@carmeloaprile9573]

ciao Leo complimenti per il tuo lavoro.... the PATCH SWITCH GAP , in futuro potrà essere risolto secondo te. grazie Carmelo

[@LeoGibsonGtr]

Ciao Carmelo, grazie a te! Teoricamente può essere risolto con un firmware upgrade in cui aggiungono la gestione delle scene. E' un tema software e se non ricordo male, al lancio mi dissero che lo avrebbero aggiunto con futuri firmware upgrade. Ma non so quali possono essere i tempi. Grazie ancora!!!

[@carmeloaprile9573]

@@LeoGibsonGtr LEO SEI STATO MOLTO GENTILE ❤️ GRAZIE MILLE

[@dirkfuchser737]

Veeery helpful ! I've got my GP 200 a few days ago, and I wouldn't have got along without your help. So a biiig T H A N K Y O U from me !

[@LeoGibsonGtr]

You are welcome, and I'm super happy to have been of some help!!!

[@Scott__C]

Leo, another great informative video! It doesn't look like the noise reduction is on. Did you not use it? I find it choppy in how it cuts off the notes.

[@LeoGibsonGtr]

Thank you Scott! Actually I never use noise reduction in any pedalboard...as it typically ruin my touch experience... Thank you!

[@CL_Audio_Tuning]

Hello Leo! Thank you for all your videos, they are really informative!! Could you possibly revisit the GP200 and the new firmware / software features? We'd love your feedback on the new udpates and features. Also, suggestions you may have on the Global Settings EQ in the unit for output conditioning. I have seen a few people commenting about the unit being overly bright? I havent gotten that impression, but it would be nice to have your thoughts on that. Oh, and would love your comments on the unit's reverb and chorus options, i feel that is one of the things the unit is somewhat weak on and could use more improvements. Especially since Valeton has the Coral pedal series which sound pretty good, but i dont see that being implemented here. I would love to have more well known chorus and better sounding reverbs from more popular offerings. Thanks and keep the great content coming!

[@CL_Audio_Tuning]

On the delay/latency between the patch or bank switching, someone posted a recording of the switch and Valeton seems to have coded a "fade in" that im almost certain could be removed or improved to make it shorter so that when you switch it woud hit at the preset's volume level, and even if there is still a little gap between the switch, removing the fade in would definitely shorten that gap a lot and improve it even more!

[@LeoGibsonGtr]

Hi Claudio, thank you for all your suggestions! I will see what I can do...

[@israelnavarro7182]

Nice video , you are awesome

[@LeoGibsonGtr]

Thank you so much, I'm really happy that you like the video!!!

[@Chyappology]

Leo for you what Is the best placement for the boost After the overdrive? I Need more volume for the solo part and not increase the gain of overdrive

[@callofsirensofficial]

This is a great video. I am trying to move a present/ patch I created currently assigned to footswitch B to footswitch C. I cannot work out how to do this and the manual doesn't help me. Any advice how to do this basic task?

[@expvet779]

Many Thanks. One question, supposedly there is a function where you can switch the expression pedal from volume to wah by pressing down on the expression pedal. Any knowledge of how this is activated?

[@teejayausmusic]

9:01 Great video! Why do the LEDs above the expression pedal change color when changing banks? What does green and red mean?

[@davidkay3443]

Great video.. new subsciber here.. would you choose the valeton gp200 over tge pod go? Thanks

[@LeoGibsonGtr]

Hi, thank you so much, I'm really happy that you appreciate the video and your subscription really means a lot to me! Hard choice between the POD GO and the Valeton GP 200. Here you can check out my full video comparison, with my two cents: kzbin.info/www/bejne/ZqHHmKeflr2rpKc Thank you!

[@Jonny-wu6gk]

Great review, Leo! Can it stack to delay or mod or drive in one chain?

[@LeoGibsonGtr]

Hi Jonny, thank you, I'm happy that you like the video. As far as I know you cannot, but there is an effect block that can be assigned to different effects like compressors, booster, ring modulator or a tape simulator Thank you!

[@thristanvasquez4882]

What would be the best gap switching patch for multi effects in this similar price range? I feel that this effects still has a noticeable gap between patches..thank you

[@kazatones]

Hi Leo, awesome video as always! Do you also have a comparison of the patch switch gap among the Valeton GP200 competitors? Like the GE 250/300, Pod Go, Ampero... I am thinking about getting one of these Valeton, but the patch switch gap may be a deal breaker for me

[@LeoGibsonGtr]

Thank you so much! I have a switch gap in the video where I have compared budget units, like the NUX MG 300, the Valeton GP 100, and the MOOER GE 150. I don't have the same comparison for other units. Thank you!

[@kazatones]

Thanks Leo! I checked that video and the Valeton GP100 seems to be better than the GP200 regarding the switch gap. The Mooer GE150 wasn't that good, but I wonder if the GE250 is quicker...

[@geiberfergus]

Thank you!

[@LeoGibsonGtr]

You are welcome!

[@darvinangeltuerosojanama2894]

Hello teacher . a query wanted to know if the valeton gp 200 has a harmonizer (hps) is a harmonizer that lets you choose the musical note

[@jaychen2000metal]

Thanks for the help now i'll help you. Pronounce the "H" more 👍

[@LeoGibsonGtr]

You are welcome and thank you for the tip! Yes...I should practice more with my English...

[@davemarchetti4255]

Can someone explain the purpose of the green / amber leds above the expression pedal? I couldn't find anything in any of their documentation. Thanks.

[@antonioansaldi3628]

Ciao Leo, grande come al solito. Lo fai un comparison tra Mooer 250 e Valeton GP200?

[@LeoGibsonGtr]

Ciao Antonio, ho il dubbio se fare GP 200 vs GE 250 o 300...ci devo pensare...e poi sto lavorando ad un progetto parallelo ed ho qualche video in pipeline...appena riesco ci lavoro. Grazie del suggerimento e soprattutto...della pazienza...essendo da solo a lavorare sul canale e richiedendo questi video comparativi un sacco di tempo...mi ci vuole un pò prima di realizzarli.

[@bgflex888]

How do we assign the expression pedal to change the rate of tremolo to approximate the slow and fast Leslie speaker?

[@dandufour43]

How do you turn the effects loop on? Some patches already has it but some don't.

[@MartinCraneRockbeast]

You can with one button press turn off reverb and on delay and gain/distortion. Alternate switching.

[@LeoGibsonGtr]

Thank you for sharing!

[@johnwaplington7869]

Great instructional video Leo ..... one point .... when you change patch ... is there a way to get the GP200 to change patch on an external device/ pedal using MIDI CC control change messages ?

[@LeoGibsonGtr]

Hi, I think it is possible sending a MIDI message from the GP 200, but I'm not sure 100% as I have not tried myself. Thanks

[@johnwaplington7869]

@@LeoGibsonGtr Thanks Leo ... needed to find out before buying one. Keep up the good work.

[@jesterraj]

how do i use this to change midi on another device ...eg tc X3? for diff patches tuning on delays or verb

[@TheCrimsonGhosts]

Hey Leo i just got my GP 200R and i LOVE it...the only thing that i think is a bit annoying is the blinking TAP LED...which for some reason doesnt blink at all in your video PLUS your LED colors in general aren´t looking like mine...can you please tell me how to change that? Thanks a lot!

[@LeoGibsonGtr]

Actually, I have no idea....😀....I have to check it out....if someone knows, please drop here a message! Thank you!

[@MiguelCarrilloPV]

Hi Leo, excelent review... Hey, question... How do you set the switch to change effects on press instead of release?

[@LeoGibsonGtr]

Hi Miguel, I'm sorry, I don't know: if someone knows, please drop here a message!

[@santana1002001]

Hi Leo! Great video 👍 what are you thinking , Nux mp 30 vs valeton go 200 ? 🤔🤔🤔

[@LeoGibsonGtr]

Hi, thank you! These are two very good units...I think it depends what you value the most, what is the most important thing for you. For instance you may prefer the GP 200 for its 8 foot switches or the MG 30 for its parallel effects....it depends from your needs. Thank you!

[@grimreaper-qh2zn]

What I wanted to do is move one of the patches so I can just have say 4 most used and select between then. When I wanted to use "Real Jazz" as one of my primary patches I can rename (As BOBS REAL JAZZ) but it still stays in it's original position and I have to take time to cycle around to get to it. How do I put a number of patches so that they can be accessed one after the other. Ideas please.

[@logarhytm]

Your video is helpfull, and i understand now why i do not like this product, it is a mess to use it. this GP200 is more complicate than usefull.

[@LeoGibsonGtr]

Hi, thank you for sharing,

[@planetside11]

Is it possible to add blocks to the signal chain that aren't there by default?

[@docmansound1]

So the wah is always on or off unless you assign it to a control button? Most wah wah pedals click on when you depress the pedal all the way down. Did it not have that functionality?

[@lorearna6267]

Hi Leo,how is the unit when you're changing from preset to preset, like in alive situation,does it cut the signal or any drop before going to the other sound? Or is tit flawless between prestes? Thanks for your time and help! Keep the great work!

[@LeoGibsonGtr]

Hi, in the video there is a section dedicated to preset switch. In my opinion the gap is acceptable, but it depends from your needs, therefore I would suggest to check it out in the video.

[@lorearna6267]

@@LeoGibsonGtr Thanks a lot,I missed that part,I would watch the video again, thanks again! Keep the great work!

[@thomaslewis6356]

nothing about the effects loop feature, ran in parallel or in series?

[@doglegsteve8363]

Hi Leo - these are great tutorials for the GP-200. Can you tell me if you can have more than one delay at a time or are you restricted to the effects they have in the chain.? In other words could I for instance change the reverb to another delay block? Thanks!

[@LeoGibsonGtr]

Hi, thank you! No, it is not possible to have multiple effects of the same type in the chain.

[@MisterQueue67]

you could run an external dealy and use the FX loop. Then you can!

[@simonfreiburghaus3068]

Great video, thanx a lot🤟 I connected my gp200 to a bluguitar amp1 iridium and i would like to send midi messages to the amp1 in order to change the amp channels. Amp1 listens on midi channel1. I set up the gp200 to send midi messages on midi channel 1, then on omni but the gp200 does not send any messages. Do you know how to set up the gp200 midi settings so that i can control any midi device listening on channel one? I spent a few hours to figure it out but unfortunately no luck😩 Can you possibly help me to solve that problem?

[@LeoGibsonGtr]

Hi, thank you, I'm happy that you like the video! Unfortunately, I have not done something similar, therefore I don't have suggestions....I would suggest to write an email to Valeton. Thank you!

[@JaiderEstidwarMejiaSerrano]

Valeton is for shure an afordable bless for guitarists :D

[@LeoGibsonGtr]

Hi, thank you for sharing!

[@sbdtoni]

hi Leo, thanks for your videos, this GP200 it's at level of Mooer GE300? kind regards from Barcelona

[@LeoGibsonGtr]

The GE 300 has some advantages, like the choice of mics, the synth, etc, but it is more expensive....I would say that it depends on your needs... Thank you for your message!

[@Chyappology]

Hi Leo very nice video. How do you set the output volume? 0 or +10 db etc. ?

[@LeoGibsonGtr]

Thank you, I'm happy that you like the video! It depends, but I would say around 8. Thanks!

[@Chyappology]

@@LeoGibsonGtr for a gig ? Going ampless

[@MangKokow]

Thank you Leo, the patch gap it's a big problem for me..

[@LeoGibsonGtr]

Hi, you are welcome. I see....I'm sorry for that!

[@MangKokow]

@@LeoGibsonGtr thanks to you, I knew about the gap before I bought it.. 😁🤟🏾

[@andrean915]

Hi, thank you for your demo! Just want to ask, do GP200 have double effects feature like Nux MG30?

[@LeoGibsonGtr]

Hi, no, it does not have parallel effects. Here you can find a full comparison video: kzbin.info/www/bejne/nqTSkKx9pqt8os0 Thank you!

[@hodshonf]

is there an Effects Send/Return block that is moveable in the signal chain like with the NU>X MG-30?

[@LeoGibsonGtr]

Hi, there is for sure a send return....and if I remember it well the possibility to move the send or the return was added with some firmware update....I'm not 100% sure....

[@alexgusev155]

Привет 👋 Лер, подскажи, как настроить процессор, чтобы при переключении пресетов сохранялись хвосты дилея ? Спасибо 🙏

[@mubianamusole1838]

Can I assign the patch switches to the + and - switches instead so I can use ABC and D for effects?

[@soag1492]

Yes you can

[@steveeckert8396]

Leo Is there away to reassign an effect? For example, replace the volume or EQ with 2nd distortion/overdrive pedal?

[@LeoGibsonGtr]

Hi, as far as I remember you can not use many instances of the same effect block. Thank you!

[@steveeckert8396]

@@LeoGibsonGtr Not the answer I wanted but as always thank you for answering.

[@Dinogelabert]

Good morning, I'm going to buy this pedalboard but I would like to know if it has a classical guitar emulator. It is to use the electric guitar with a preset that simulates the classical guitar. Thank you very much for your videos and explanations. Greetings.

[@LeoGibsonGtr]

Hi, it does not, as far as I know, but you can load and IR of a classical guitar to get something similar. Thank you so much!!

[@Dinogelabert]

@@LeoGibsonGtr Thank you very much!!!

[@genenery9315]

Mr. Leo, could you please tell us where in the signal chain the effects loop is situated? Is it pre or post the amp and cab sim? I'm hoping it's post! Thanks!!

[@LeoGibsonGtr]

Hi Gene, the send and return are after the AMP module. You can use Parallel or Series configurations. This is what it is written in the user manual: " ◦ When set to Parallel, the returned signal from external fx chains will mix with the AMP module and be sent to the latter signals in the signal chain. ◦ When set to Series, internal fx chain will be temporarily paused, only signals from external eft chains will be sent to the latter signals in the signal chain. " Thank you!

[@jburdsinfuse]

For $300? Not bad. I’ll stick with my Stomp XL and a few pedals, but this is 👌

[@LeoGibsonGtr]

Hi, thank you for sharing!

[@scubbyism]

Are we able to assign patch individually to the foot switches? Like patch 1 to A patch 2 to B and so on!!

[@LeoGibsonGtr]

Hi, yes, it is possible. It is what I did with this video with patch A and B Thank you for your question

[@gladosgladosen3080]

Hi Leo! Can 4 footswitches act like 8 or 12 footswitches. Like one switch makes you choose a "page 1, 2 and 3" in the chain so you can control all of your 8 or 12 effects and so on individually with the 4 switches?

[@LeoGibsonGtr]

Hi, I don't know if I have properly understood the question....as far as I know you can switch on and off multiple effects with the GP 200, using just one foot switch. Thank you!

[@mojo_plasma]

Great Video!!. Question... Can you have more that one Drive or Delay in same chain? Thanks!!

[@LeoGibsonGtr]

HI Kevin, no you can not. But there is a "pre" block where you can charge different effects, like a boost, a compressor, etc. Thank you!

[@mojo_plasma]

@@LeoGibsonGtr Awesome!. One more question if you have time... Did you find it easy to hit the DSP limits? Was it a struggle to make full use of all the fx blocks without hitting limits? Thanks for all your help!!! Have a great day.

[@LeoGibsonGtr]

Hi, well, I have no problems, but I'm not an heavy effects utiliser-

[@mojo_plasma]

@@LeoGibsonGtr Hey Leo, Sorry to keep bugging you... Do you know if the control footswitch can also be used to turn on/off effect like the 4 other footswitches/ Thanks!!

[@Slavetskiy]

Now using ge-200 and so sad.. Cause i can't dial sounds that i need... I need Mesa rectifier channel 3. I'm applying many IR's and internal cab's, but it sounds like a sugar, cause near i have Quad Cortex, so i have A-B comparison. So, the Valeton GP-200 not so bad, but Neural DSP are messup me! Btw, thanks for a job, Leo!

[@LeoGibsonGtr]

You are welcome, and thank you for sharing your opinion and experience!

[@edwardmakabling418]

Hello Leo. Is the signal chain also available to other valeton go models?

[@LeoGibsonGtr]

Hi, I'm not 100% sure, but it should work. Thanks!

[@prashantbasnet274]

Hi Leo, a quick question- Can we keep 2 or 3 distortion pedals in the same patch to use it like a stacked distortion model in a pedal board where you could increase the gain of the distortion through footswitch just like having 2 or 3 separate distortion pedals in a pedal board? I am thinking about getting the larger version of Valeton GP 200 where I would have multiple footswitch and I kind of like to have at least 2 distortion pedals with different gain levels.

[@LeoGibsonGtr]

Hi, the same effect block can NOT be replicated many times. Nevertheless there is ONE effect block that cab handle different effects (including boosters) if I remember it well. I would suggest you to check out the user manual and verify what type of effects can be handled by the PRE block. Thank you!