Ford P1450 EVAP Code (How to) Simple Diagnosis and Repair

Рет қаралды 69,084

Жыл бұрын

Diagnose and repair a Ford P1450. Edge, Focus, Escape, If it's a Ford the diagnosis will be similar.
😎 If this video has been helpful consider supporting us with a cup of coffee!
www.buymeacoffee.com/ValleyMo...
🛒PARTS LIST:
➦ Purge valve assembly: amzn.to/48IAgzb
🛒TOOL LIST:
➦ Scan tools to consider:
➦ Launch CRP123E: amzn.to/3PznBIa
➦ Blue Driver: amzn.to/3JD5XiS
➦ Foxwell NT604: amzn.to/3r1WiMp
➦ Launch CRP919X: amzn.to/3pAzink
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.

Пікірлер: 44

@providentpathfinders219 5 ай бұрын

For ANYONE replacing the whole thing. the connector that people always have problems with is down by the alternator. The solution is to loosen the hose clamps above and below the piece that the connector is attached to and simply rotate it out to the front of the engine. then you can get to it without tearing your hands to shreads or trying to jab at it with picks and screwdrivers.

@jacobheyza6520 3 ай бұрын

Just did this on mine and spent around an hour messing with that bottom connector. Disconnecting the hose would have probably made it a little easier. Was able to get it with picks and screwdrivers lol

@bird2can348 25 күн бұрын

Thank u 4 this..couldn’t have been explained any better..2thumbs up for sure 👍🏽 👍🏽

@jasondailey6188 2 ай бұрын

Outstanding explanation. Thank You.

@ValleyMobileAutomotive 2 ай бұрын

Thanks! Glad this was helpful 🙂

@mistera166 11 ай бұрын

Thank you for showing us how to take out those connectors. I was having a hard time with this. I was afraid to break them. You showed me how to do it. Thank you again.

@bobbaird1934 8 ай бұрын

best ever explained=two thumbs up,thanks

@jrodriguez1374 5 ай бұрын

God damn. What a well explained, holistic video. Thank you!!

@ValleyMobileAutomotive 5 ай бұрын

Thanks!

@pslay9324 10 ай бұрын

Excellent video! Really great explanation to how to determine.

@Mr2004MCSS 10 ай бұрын

Great video and explanation on how the system works.

@Angelo80907 Ай бұрын

Thanks for this video explained everything and easy to understand thank you!

@ValleyMobileAutomotive Ай бұрын

Glad this was helpful 👍

@ranckie5055 9 ай бұрын

Thank you for a great video. I wish that I had seen it before I attempted to remove the hose with the yellow clip that goes to the large rubber air tube. I was attempting to remove that air tube to give better access to the solenoid valve which is the only part that I was changing, (I have big hands). But, when I attempted to remove the yellow clip, I did it incorrectly and I broke the clip. I was willing to take a chance on just changing the solenoid purge valve because the part cost was only about $15.00 on Amazon, and ninety-nine percent of the time, it's the solenoid valve that is bad, and in my case, it fixed the problem. But now, I'm sort of in a pile of dung because that clip is not replaceable, (unless of course someone knows of a way to repair/replace it). It's not a problem right now because the hose is still securely attached to the air tube since the locking part of the clip is still in the connector so the hose cannot be removed. But, if and when the day ever comes that I have to remove that hose, I suspect that my only option will be to destroy the entire connector, remove the hose, and change the entire tube, (if that day comes I'll buy a FANLIDE Vapor Canister Purge Valve F2GZ-9D289-A on Amazon for $70.00 and use that assembly, which is a far cry better than the $176.00 that Ford wants for the same assembly.

@normcarguy4571 5 ай бұрын

Thanks

@petermensing5502 6 ай бұрын

My vehicle has that symptom after my fill up it is flooded. Thank you very much.

@Dogg1512 7 ай бұрын

Awesome video 👏 It's always good to get the science behind repair, thanks again. Lemme ask a quick question, could you have just changed the Vapor Canister Purge Valve only, instead of the whole assembly

@nalleniverson 4 ай бұрын

From what I’ve seen, the hoses are all permanently connected.

@shotgunshane1573 4 ай бұрын

Yes, you can, but you'll have to replace the hose that you'll need to cut for the repair.

@M00SHYCOW 7 ай бұрын

Hey I have the 2015 ford edge 2.0 but my valve has 2 hoses and just the solenoid and I can’t find it anywhere I’m very confused the thing has 2 hoses and on the solenoid not the 3 hoses and the solenoid any advice thanks!

@user-lb4mk7du6m 3 ай бұрын

Nice explanations…. Anyone have any other idea about the P1450 fail? Since I replace it on my 2017 ford escape and the issue persists…. Every time I fill my tank, I have to wait couple minutes to start the engine

@TheBiocart 11 ай бұрын

Lol, I did this replacement literally a week before you posted this, real knucklebuster. Btw what scanner are you using there?

@PhilippeReid 11 ай бұрын

I sure would like to know too what scanner that is…

@williammennig5846 10 ай бұрын

So would this be the fix for mine possibly code 1450 and problem is hard time starting after getting fuel

@ValleyMobileAutomotive 10 ай бұрын

The code along with your symptoms makes it a big possibility this is your issue.

@user-oi9hv6xd1p 11 ай бұрын

How did you reach the connector way down under the engine? I'm having a really hard time getting my hand around the radiator hoses

@providentpathfinders219 5 ай бұрын

@rapinncapin123 2 ай бұрын

I'd tell you But it's been 8 months already😂 You're probably good by now

@CARLOSGONZALEZ-wk2jj 4 ай бұрын

Question i changed the canister purge valve and the canister the one is next to fuel tank but keep saying Unable to Bleed Up Fuel Tank Vacuum and when i go to put gas the fuel tank sounds boom and when i try to start it is hard

@user-lb4mk7du6m 3 ай бұрын

Yes… I have same issue after replaced…. It doesn’t work… Have you find a different solution?

@chrisaesculus5520 Ай бұрын

@@user-lb4mk7du6m Same here.😂

@jayman9750 Жыл бұрын

Bro when are you located? Or what’s your service area?

@user-bx2eh8zu4j 9 ай бұрын

what is the Part number for the whole assembly?

@ValleyMobileAutomotive 9 ай бұрын

I'm not sure. I got it from the local parts store.

@adrianbreedlove6510 4 ай бұрын

Folks, if you haven't taken yours apart yet and are planning to tackle this yourself, save your hands, knuckles, wrists, energy, curse words, and frustration. Do this instead - Clip the zip ties holding the 3 hoses together. Undo the white pinch connector hose from the top of the intake and underneath, and also the purge valve over on the driver's side under the intake hose. LEAVE the hose with the YELLOW CONNECTOR ALONE. Undo the zip ties on the new standard piece, and use the hoses there, other than the one with the yellow connectors. After you have the other new hoses set into place and purge valve in place, just zip tie them back together like they were from the factory and you're set. I'm 2 days into a 15 minute job, so don't be like me.

@ValleyMobileAutomotive 4 ай бұрын

Hey Adrian! Thanks for the tip 👍