VANLIFE WITH PETS? You need a Maxxfan Deluxe.

[@GregVirgoe]

If you want to know more about the great features of these Maxxfans please watch my unboxing video where I go through the benefits and why they are so good. kzbin.info/www/bejne/f6ile3p_q82sd8U

[@brianboczko7169]

Outstanding and can I say a big thanks for giving you time to help out a veteran being 1 myself your a gentleman

[@GregVirgoe]

It’s absolutely my pleasure. Rob is one of the kindest and genuine blokes I’ve met. It’s what friends do help each other 😊Thank you 👍🏼

[@brianmcclure8012]

Super instructional Greg & as you say very happy Archie

[@GregVirgoe]

It has been keeping him very cool on the warm days we have had so far.

[@robertirving5293]

It's nice to have good friends to give you hand Rob what a nice job you both done .

[@martinramms]

Oh Great !!! A Airdale Terrier !!! Wonderful trimmed ! Our first Airdale was nearly 18 Years old as he dies...

[@GregVirgoe]

Wow that is a very good age 😊🐕

[@roberthubbard3931]

These are the only fans I'll ever use after installing one. My favourite thing about them is if you run it on its lowest setting at night venting the air out you wake up with no condensation in the van. That alone is worth the price to me. Great to see some more videos from you!

[@GregVirgoe]

Exactly that and at that speed you cannot hear them and they are only drawing about 0.1Amp so very little. Thank you for great feedback. 👍🏼😁

[@JonNewlyn]

Those ribbed templates are absolutely brilliant, we used it on the rear of our Citroen Relay.

[@GregVirgoe]

That’s great to know. Thank you 😊

[@JonNewlyn]

Btw, we have watched nearly everyone of you videos and I have your wiring diagram on the wall for when we do the electrics. Amazing videos, keep up the good work.

[@GregVirgoe]

@@JonNewlyn thank you very much. Best wishes with your build

[@allieb1621]

As always, love your calm measured way of doing things and sharing your expertise while always producing a professional finish. Appreciate the humour too! Thanks

[@GregVirgoe]

Thank you 😊 only person that has mentioned that. Glad you liked it 🤣

[@grahammonaghan6682]

One point of interest for me was, the rusting near one of the screws because the mastic didn’t cover it. And conversely Shows that the mastic strips worked on the other screw entry points.

[@GregVirgoe]

Exactly maybe there had been some water ingress there which shows that it pays to spend a little time and make sure the mastic sealing strip covers everything 😃

[@alancuskin555]

Like your advice love the t shirt down and out Motorcycle

[@victorgomes7585]

It certainly gives us confidence for us to get our hands on some DIY. Thanks mate.

[@GregVirgoe]

Walking you through the steps in this way I’m sure it’s something that anyone could do just take a bit of time 👍🏼😁

[@MrVoxPathfinder]

Nice to see some cutouts as well at the end. Great job Greg!

[@GregVirgoe]

Yes we had some fun doing this build 😃👍🏼

[@jonathanmead]

Auto Glym Magma is excellent for removing the rust spots on automotive paint. Spray it on, and it reacts with the rust, turning red. It simply rinses off after 10 minutes or so.

[@GregVirgoe]

Brilliant suggestion, thank you 🙏🏼😁

[@jrsuk1170]

Thanks for that, I'm going to order some right now. 👍

[@kevinthebespectacledpilgrim]

I was astonished at how well the Auto Glyn Magma worked on our van. No more nasty rust specks. Highly recommend.

[@arcenciel2968]

Is this also good for removing rust from fiberglass boat decks? Thanks.

[@kevinthebespectacledpilgrim]

@@arcenciel2968 I imagine it would work just as well.

[@ianofsjkartwork]

Top class work by all involved Greg.............you know how to do the job right Greg.............stay safe..........thanks for sharing

[@GregVirgoe]

Really appreciated many thanks 🙏🏼

[@aaronblueandme8127]

Some really great advice on fitting. I am going to change my Fiamma turbo vent as it's too noisy. It works for my dog and cooking but an impossible amount of noise to sleep with.

[@GregVirgoe]

These Maxxfans on low speeds you cannot hear at all and only use a fraction of an amp at those speeds too. Perfect for night time fresh air

[@kstewart3657]

Excellent video. No one does it better. 👏

[@GregVirgoe]

That’s very kind of you 😊

[@angusmacarthur8375]

Hi Greg, the finite detail you provide in your videos is second to none, fantastic and very well done. Many many van lifers will be better off for this. Best Angus

[@GregVirgoe]

I’m just happy to be able to help other achieve their dreams and give them the confidence that they can do it themselves.

[@driftingcaravannomad]

Like Rob I'm on my own with a dog travelling Europe and have no choice but to leave the dog in the car while supermarket shopping, a good tip is to do the shopping first thing in the morning when you can find some shade, even if it's around the back of the shop, I put the air con on full tilt on the way and have extra fans running while it's parked, it's still like a bank raid when I'm in there but the car always stays cool

[@GregVirgoe]

Good advice to those things in the morning when it’s cooler outside.

[@justwannasay5454]

Bank raid? lol. 😬 That means you hurry?

[@sea2sea2seevanlife92]

Thank you... very detailed and informative. I have a fan I purchased to install and this will help immensely... Thanks again!

[@GregVirgoe]

Glad you found it to be helpful. 😊

[@markleigh6386]

Brilliant video Greg those roof profiles are a good idea. Thanks Greg

[@GregVirgoe]

It’s about time someone made those it’s a much better install

[@888johnmac]

once again , you make van converting look easy .. thanks for taking the time to do these

[@GregVirgoe]

I like to take my time and not rush things. Appreciate your kind comment. Thank you 😊

[@LostNative]

That's kind of you to help out Greg, glad Archies gets his own personal fan 😎

[@GregVirgoe]

That’s what friends are for 😁🤗

[@LostNative]

@@GregVirgoe Nice one 👍🏼 enjoy Europe. I can't wait to get going next spring. Probs see ya and then next meet ups next year. 👍🏼

[@GregVirgoe]

@@LostNative I’m sure we will see you again soon. Have fun 🤩

[@johnkennedy8363]

I noticed that you have 2 Maxxfans on your van. Your great videos helped me decide which equipment to have on my van: unfortunately I’m not a skilled DIY like you: all your work (and planning) is exemplary. So I do have a Maxxfan, Michelin Agilis Cross climate tyres, 2 14KG LPG tanks and 2 130W solar panels with a 240A lithium battery (for the weight) as I have a Ducato 180HP with the 9Sp automatic gearbox and full VB-Airsuspension (on all 4 wheels), so I have to count the KGs to stay below 3.5t. Your good sense helped me equip my van perfectly.

[@GregVirgoe]

That sounds like a great setup you got there. I do a lot of research to find the best products. I alway said I wouldn’t promote anything that I wouldn’t buy and put in my own van. Glad they have helped you 😁

[@suffolkseries3319]

Just needed the Virgoe treatment!! Love it.

[@GregVirgoe]

A little bit of VLC 😂😁

[@beckypincalifornia1985]

As usual, a perfect installation. Love watching you at work!

[@GregVirgoe]

Thank you for such great feedback. 😁

[@ROUTEPLANNERPAUL]

Great installation Greg

[@GregVirgoe]

Thank you 🙏🏼

[@eddvanlife7396]

Greg great job and wish leisure vehicles had the ribbed roof former when I fitted my fans to my Relay. I actually had to redo one of them as it leaked. Looks like a great product and a fab solution to fitting and keeping the fan hole water tight.

[@GregVirgoe]

Water can find the tiniest of holes to get through. It will make things easier

[@chrisneville7310]

One of the best fans on the market Greg and great info👍. I opted for adding 12 volts to the skylights so I have the option to add and move different size fans for the summer and winter. It's also easier to keep clean and gives you maximum light.

[@GregVirgoe]

It is a very good piece of kit. You have found a solution that works fir yourself and that’s the main thing. Good luck 😉

[@chrisneville7310]

@@GregVirgoe I guess I just love to play about, I'm loving the build and the Murphy bed is awesome, designed to sleep on all four sides and never have to worry about the blood rushing to our heads. I've even built a 3kW power station with lifepo4.

[@ian_morg]

Another fab video 😎👍🏻 Well done guys!

[@GregVirgoe]

Thank you Ian 😊

[@topmarque1974]

Definitely with a senior dog that likes to trump at any given moment 😂🐕‍🦺

[@whu58]

Always interesting watching your videos on how to do things properly,.........looking forward to your adventures in europe.

[@GregVirgoe]

Thank you for always supporting us.

[@ronbooth1382]

Well done mate, an excellent upgrade for Rob and Archie. Stay safe and give our love to Louarnna x

[@GregVirgoe]

Hi Ron, glad you watching the videos. We’ll keep them coming out regular now. Louarnna sends her love to you both xxx

[@donwhitehead4587]

Again, well done Mr. V👍🏻👍🏻

[@GregVirgoe]

Thank you Don 👍🏼😁

[@annemarsden2323]

Brilliant job we may be looking at this again 🥂

[@GregVirgoe]

They are here to be used as a guide and helping hand. Best wishes 👍🏼😁

[@stewartashling]

Best advice ever thank you.

[@mickwhitney922]

I'm going to miss you and lou at next south central meeting 😢 but you enjoy the trip 😉

[@GregVirgoe]

Sorry we can’t be there to see you mick. Hope we can make the next one 😁

[@wayneoldale1432]

Always a professional job Greg. Love the videos keep them coming please..

[@GregVirgoe]

That’s very kind of you. Thank you 😊

[@mattysheriff1881]

Regards to the rust spots on roof....mainly caused when using a grinder to cut out hole where red hot iron filings sink into surrounding paint and almost impossible to remove. Best to cover any paintwork nearby....have sprinter like yours, was planning a build before lock-down but had to delay due to depleted funds but always looking for ideas on your channel.

[@GregVirgoe]

Any swarf from cutting will give similar results if left to go rusty.

[@gertvanwerven6355]

Top video again. And parkup must be Lieblingshof near Rostock

[@GregVirgoe]

Yes it was, very nice farm stop and lovely owners made us very welcome there.

[@davidhughes521]

Great job

[@GregVirgoe]

Thank you 😊

[@Scud_and_thesTig]

Cracking instruction vlog 👍💙❤️

[@GregVirgoe]

Thank you 😊

[@brynnhowell9916]

Superb-as usual Greg

[@GregVirgoe]

Thank you very much 👍🏼😁

[@geoffcampbell7846]

Great vlog, as usual. 👍

[@GregVirgoe]

Thank you Geoff 👍🏼

[@gonefilming2020]

Great video on the installation, Greg! 👍 Be careful with those screws fixing the plastic frame to the roof though. The taper on the screws will stress and possibly split the plastic... 😟 The type of (4) screws fixing the vent to the frame would be my preferred choice for frame to roof attachment as well... Happy continued travels! 🚐☁️🍀

[@kevgermany]

Nice job. Surprised no sikaflex primer this time.

[@GregVirgoe]

The hot soapy water was the next best thing to remove any traces of dirt etc.

[@ZerHour]

Nice job ,I am a fan of the mastic tape method ...👍🚐 there's a joke in there to lol 👍🚐🌴🚴

[@GregVirgoe]

I saw what you did there 😂😀👍🏼

[@ZerHour]

@@GregVirgoe Yes, any way a Fanmastic job done 😀👍

[@Feede.Mountain]

Good info as always... 😎

[@GregVirgoe]

Many thanks Bernard.

[@Rob.1340]

nice job. all the best. cheers. 👍😎

[@GregVirgoe]

Thank you Rob 👍🏼😊

[@John-oh8bq]

Hi Greg, love your work. Thank you for your time making these videos its awesom. I apologize in advance as i am asking a question that you probably answered before, but i couldnt find it in all the videos. What was your Sprinters weight after your build. ? Did you know the weight before installation.😁😁

[@robhill2702]

Another great vid…Music at 09:00 reminded me of a KZbinr called ‘Tims Wood Adventures’ not great production but if anyone cuts and splits their own firewood - they will deffo learn some cool stuff of him - he’s a pro👍🏼

[@GregVirgoe]

It’s a mandolin piece from the KZbin free music studio 😁

[@garrystacey7018]

Interesting video thank for sharing 👍

[@GregVirgoe]

You are welcome 🙏🏼

[@PompeyBoy66]

Another great video.

[@GregVirgoe]

Thank you 🙏🏼

[@DA11NOON]

Great vlog 👍

[@GregVirgoe]

Thank you 🙏🏼

[@anfieldroadlayoutintheloft5204]

good vid on your travels stay safe lee

[@GregVirgoe]

I'm a fan of your channel, you'll enjoy our Hamburg video coming out soon.

[@cb3652]

I wish you would have demonstrated the operation of the fan to finish the video. Thank You

[@GregVirgoe]

Please watch the unboxing video in the link below. I run though the operation of the fan in that video 😁 kzbin.info/www/bejne/f6ile3p_q82sd8U

[@okcantbelieveit294]

Another great video! 👍

[@GregVirgoe]

Thank you 🙏🏼

[@davidanderson5893]

Another video already? Greg you have been busy....safe travels guys.

[@GregVirgoe]

Wow Dave, I can't believe it. :D

[@FionaJayneA]

You're on a roll 😂😂

[@davidanderson5893]

Just lucky Greg. I do wish I had fitted one of these instead of what I have as you can't have it open if it rains.

[@GregVirgoe]

@@davidanderson5893 that’s the biggest bonus for us otherwise it would get steamy in here if the vents weren’t open all the time. First thing we do when we park up is open both vents. 👍🏼😁

[@RicardoOliveira-pb3ih]

Gosto imenso dos vídeos do Greg. Se um dia tiver uma autocaravana, foi ele que me influênciou.

[@GregVirgoe]

Google translate please?

[@williammercer6074]

Yet another great informative video Greg.........but you didn't stick your head through the hole :(

[@GregVirgoe]

I know I had planned to get rob to do that but it somehow got forgotten until I remembered at the end and already fitted the fan. I was gutted we should have done it 🤣😁

[@ivecamperbuild_thomas4084]

You can just wire a radiator fan to the vent and wire a speed controller Which is more powerful then the max fan and you don’t have to remove the vents or spend £350 and it will also work on a smaller vent

[@GregVirgoe]

But that wouldn’t work in the pouring rain 🌧 its in a different league really. 😊

[@FlorryTheLorry]

Don't get the real experience of local life if you're rushing through trying to get lots of countries under the belt. Germany has so much to see. Enjoy 👍🚛👫🐾

[@GregVirgoe]

Yeah we like to go at a much slower pace soak it all in and relax more 😁

[@FlorryTheLorry]

@@GregVirgoe 👍👍😘

[@sosaidhrafferty4608]

Great vlog Greg and love this Maxxair but we have a poptop so doubt we would be able to have one 👍

[@GregVirgoe]

Ah yes can’t really put anything on that type of roof. Does the top have side opening windows in it for ventilation when it’s raised.

[@sosaidhrafferty4608]

@@GregVirgoe yes and as it's a vito dualiner we still have both doors to open but it was for when it's raining. However, we had an eberspächer fitted on Thursday and I was using the ventilation on that last night and it was good so we will be fine 👍 hope you and Lou are having a great time 😊

[@GregVirgoe]

@@sosaidhrafferty4608 yes we are enjoying being back in Europe.

[@snoman1999]

Hey Greg i was wondering about those self tapping screws to fix the fan to the van roof.. Is there a specific torque setting for them as when i did mine I overtightened a couple and they just started spinning 🤔 Glad you guys are back on the road and showing people that you can still travel despite Covid and Brexit 🚐💨❤️👍🏽

[@GregVirgoe]

It would depend on what thickness of metal you were fixing into. Fir this application it just want to be touching the plastic but not so much as to deform it. If the plastic change starts to bend it’s too tight. To strip the threads they would have been far too tight. If the plastic bends over time that could crack and let water in.

[@inorr]

Hi... When you put the fan in to the frame,,,that you have sealed very well,,i see a large gap between the frame and the fan,,,should`nt that gap be sealed too? it is going to be lots of water going down that gap when you are driving or in windy rainy condition,,,i guess,,,,,or up here in northern sweden,,snow will go there and melt,,,where does the water go then? Just a thought. Thank you for many good videos 😃

[@GregVirgoe]

No there is a rubber gasket in that groove that makes it water tight. You do not need to put any sealant around that joint. You will not get any problem with leaks. Trust me 😁

[@kevinsharpe8335]

Greg what would be the required size cable to run the maxx fan? I am thinking of where to get a supply from to replace an existing vent as in this vid.. great to see you back making videos again btw 👍👍

[@GregVirgoe]

1.5mm cable will be fine for the fan

[@965039065]

I have to get one of those.....when i grow up...🤣🤣🤣

[@GregVirgoe]

Did you not get one of these fir your van? You definitely need one Rui 😁

[@965039065]

I have a fantastic fan by dometic....i have a friend who used that one when they built the van😉😅

[@GregVirgoe]

@@965039065 oops 😬 we’ll say no more about that hey 👋🤗

[@TheKezz18]

I installed my fan yesterday on a sprinter. 2 questions for you. 1. When I put the fan in I checked the wires went through however I didn't check the wires at the back of fan. The glue had removed so they were not stuck into pace and I have dented them by pushing the fan as I couldn't get it to fit. They were obstructing. Will the wires be OK? 2. When I pushed the fan down to screw the fan in place. I looked underneath and have missed the hole on 2 screws and pushed the metal clip out. Rather than through. What should I do next?

[@GregVirgoe]

I would remove the four holding down screws and take the fan back out to check and reroute the cables. Also put back the metal tags and have another go at fitting the 4 screws again. Hope that helps.

[@NomaddUK]

Hi Greg. As always a very detailed and useful video. I have a request, nobody has done a "How to get hot water for a van on a low budget!" video. Is this something you would be able to do? I have a very small van, a Renault Trafic LWB, and don't have the space or money for the larger, more expensive boilers etc. Is there a small/budget solution that you can do a video on or simply recommend? Cheers! BTW I noticed that ninja horse sneaking up on you at the beginning. It neighly got you. Happy New Year!!

[@kevj1964]

Another very informative video. Are you still going to do the "Van Build on a Budget" series you mentioned a while ago?

[@GregVirgoe]

It’s still something I would want to do yes. I had to put it in the back burner for personal reasons

[@rs628]

Hi Gregg, we have been following your construction of the shower build and wondered what you have used as a handle/lock to secure your shower overlap door. We have searched widely but cannot find anything that looks like it would work. Have you any advice? We'd much appreciated your help with this.🙂

[@GregVirgoe]

Yes it’s a tough one we looked fir a long time too. In the end I settled for a handle the same as the cupboards and a strong magnet as it’s only us in here it has worked ok

[@uwewegner9834]

Hi Greg, we have been following your Videos with great interest. We live in Cornwall at the Moment. Originally from North Germany and been in the Road with a T 4 Multivan for at least 10 years. We have recently bought a Sprinter, so much more space. And soon we are of to Germany and then Spain. What I would Like to ask you is , how did you go about your Headlights as you are nie driving in the right hand side of the road

[@GregVirgoe]

You can buy the reflective patches to stick on the headlights. I tend not to drive at night anyway I like to drive early and get to where we are going before it gets busy.

[@UrbanVanlife]

I understand why people for the fiama fans cos of budget . But I’m all honestly there just An awful bit of kit . My thoughts are wait save abs fit a max air fan . Mainly cos you’ll end up fitting on any way further down the road

[@GregVirgoe]

You’re right Neil, they are not the cheapest on the market but they make a huge difference in practical terms. Cheers 🍻

[@davidhale4830]

Great video, I'm just about to do the same fit to my Citroën relay campervan,one question, how do I get power to the fan 😮is it simple from a 12volt box in a cupboard near by.thanks again

[@mos6146]

Is this a stupid question ? How do you use your fan ? Do you find air is best being drawn in or being sucked out ? At night we leave ours on level 1 extract and it removes all breath humidity. Just interested to know how you and others use them ? And yes.. I did fit ours after watching your initial Maxxfan installation. Very happy with it !

[@GregVirgoe]

Different ways for each application. When cooking lots of extract. If it’s hot one on supply over the bed and the other near the cab on extract as that’s the hotter end. At night when cold we just leave them open but off. If hot at night we have it on 10% supply to give us cool fresh air. For pets I recommend it on supply to give them fresh air. Lastly if you have just one fan you need another opening either vent or window to allow the make up air in or out for better circulation.

[@justwannasay5454]

What a good friend to do this. Did you test the fan before installing it? I had a Maxx air fan installed on my 24' foot Hi-Lo travel trailer. I like it. Was going to have one installed on my cargo van but I decided to wait so I have a spare fan.

[@GregVirgoe]

I didn’t test it, I trusted that it had been factory tested before it was shipped to Rob. If you had to change it it’s only 4 screws to swap it out unlike most other fans.

[@justwannasay5454]

@@GregVirgoe Oh thats good to know! I have the one w/o the remote. Didnt want the remote.

[@markfletcher3406]

Sorry if I’ve missed something, Greg. On this installation it doesn’t appear to have a frame on the inside of the van to screw in to. Is that not necessary with this particular model? Thanks again for a mega helpful video.

[@GregVirgoe]

A timber frame is a better way to go as it does add a lot of rigidity back into that thin metal hole in the roof. However in this case it would have meant ripping out some of the interior to fit that. So Rob was ok to fix it without. There maybe a little more flex this way but the mastic sealing strip stays flexible and will ensure this never leaks. Hope that helps you 😊

[@markfletcher3406]

@@GregVirgoe thanks so much for taking the time to reply. All the best, Greg.

[@wilbearworks]

A great informative video and it only took half an hour?

[@GregVirgoe]

As they all do 👍🏼🤣😁

[@jackburt5008]

Is there a reason you have it facing that way? Does it not catch the wind if driving?

[@CiderTalbotToo]

Can you come to Swindon now and do mine 🤣👍

[@GregVirgoe]

If you set you smart device up on the roof it’ll be like I’m right there with you on every step 👍🏼😁

[@CiderTalbotToo]

@@GregVirgoe lol I all ready do

[@Lonerider63]

Hi Greg, great video as always, I on my first trip around Scotland in my self build,I have a maxfan fitted at the front but it suffers extreme wind noise when closed whilst driving in winds is this normal.I checked its fully closed,many thanks Martin

[@GregVirgoe]

It’s unusual to get a lot of noise from them when driving. Do you have other things on the roof too?

[@Lonerider63]

There's a large solar panel behind then a large skylight behind that,I think its the fan itself even though the lid is fully down ,I'll probably remove it when I get back home and examine it again

[@andyb9262]

The standard seal for these fans does not go all the way round. This gives some permanent ventilation but can be noisy when driving. It’s possible to replace it with a seal that does go all the way round. I bought the version of this with the white lid but it lets in quite a lot of light at night. I took the lid off and stuck closed cell foam to the inside for a better blackout and more insulation.

[@Lonerider63]

@@andyb9262 thanks for that I'll look at it when I'm back home

[@Pit8800]

@@Lonerider63 Hi, mine is very noisy too, especially when you get a strong cross winds while driving. Thought it’s faulty but if you Google it it’s a well known problem that never gets mentioned in install videos. Some people think it’s a van, no bulkhead etc so it has to be noisy but I’m very sensitive and it a pain in the back. I’ve seen an ad on Instagram from people who make thermal blinds. They’ve made cover for Maxxair fan that’s held by magnets. I’ll be making one myself then need to fix the rattling noise around sliding door 😅

[@ML-jr1yz]

Nice video, i want one but it is expensive....

[@GregVirgoe]

Like most thing you do get what you pay for and quality does demand a premium. I know we would not be without ours.

[@ML-jr1yz]

@@GregVirgoe so far i fitted- sterling power 1260/votronic shunt 200A/300wperlight panel/propex heater/40A epever controler/ temperature station/12v compressor fridge able to stay offgride for as long as i want. Only missing a maxfun.

[@GregVirgoe]

@@ML-jr1yz being off grid will give you tons more choice for some epic parking locations. Just look at our Scotland trip for example we were off grid the whole time while there.

[@nickhoward9343]

👍👍

[@GregVirgoe]

👍🏼😁

[@mange2]

Great job Greg. Do you know where I can get a replacement hood? I want to change my white one for a dark one but cant find a supplier.

[@GregVirgoe]

I will send you some contact details buddy. Thanks for watching mate 😁

[@mange2]

@@GregVirgoe Thanks Greg 👍

[@WanderingWheelie]

Maxx fans are better with a fly screen fitted by a Mr Virgoe.

[@GregVirgoe]

Hello guys, how is that working out for you? Better at night too? 👍🏼😁

[@WanderingWheelie]

Much better mate. What size is the fascia on the inside? I just need to measure to see if I can have another one at the front.

[@ricb2408]

Hi Greg. Watched most of your video but didn't see any regarding if you had insulated the cab floor? Haven't found much online about it . I'm trying to find out best thing to do with it has I have hammerited it . If you could give me any idea what to put down it would be much appreciated thanks

[@GregVirgoe]

No I didn’t insulate it but did buy a fitted carpet for the cab floor

[@soandsononame8750]

I’ve found the roof vents are highly overrated. Giant 14 inch hole in the roof that lets a lot of sound through and is not insulated. I ended up making a cushion stuffed with havelock wool insulation that fills up the vent most of the time. The only time i use the roof vent is when the weather is absolutely perfect, 99% of the time its not.

[@GregVirgoe]

You will get a lot of problems with moisture and mould in your van if you don’t have good ventilation. We leave both outs open in all weathers even if really cold. We use the heating to keep the van warm.

[@soandsononame8750]

@@GregVirgoe i agree need some method of ventillation. But both my air conditioner and heater have vent only modes, so I rarely need the roof vent

[@GregVirgoe]

@@soandsononame8750 both the AC and heater normally only recirculate the air within the habitation area when in vent mode. That is how all Truma and Propex units work. They rarely bring in external air because they adds a huge load on to the system. Your vents on the van of the van would be a better source of external air if that’s all you got.