Version 2 How to stop your Non Turbo RZR From Blowing Belts!!!

www.hunterworks.com/inc/sdeta...
This video talks about our new White Washer that helps stop belt overtravel in Polaris RZR's

[@imagri1]

I finally found the solution! Loving my x3.

[@StrykerBuilt]

Its like going to your favorite Uncle Todd's house and really learning something in every video. Your awesome man. I will be helping lighten your washer amount soon lol.

[@Hunterworks]

Uncle Todd approves this message!!

[@jacobandring8455]

Another great comment sense approach video...very nice

[@earlcharger]

I just got a new Hunterworks Belt and also got some washers. I'm installing belt and washer now. Your videos break things down to make a lot of sense! Thank you!

[@XMARGH]

Absolutely can confirm on my 2018 RZR XP1K that in low gear High Rpm the belt was touching the bottom of the secondary on my machine prior to this modification. Definitely appreciate all your research Todd.

[@rickcanchola3534]

Will be buying a belt and a washer. Thank you!!

[@gregcandor2956]

Another quality video thanks for sharing the info I understand what’s going on now

[@Hunterworks]

Thanks

[@TheStp77]

Damn just ordered some stuff from this guy, service was flawless, shipping was fast, answered every dumb question i had and has a video for every thing he has Definitely definitely definitely recommend checking out this guys webpage 🤘🤘

[@Hunterworks]

Thanks for order and comments

[@jenngill7772]

Lmao, “finger control “ :) I tell people that all the time, they don’t believe me either! Thanks for your hard R&D time, btw. 😎

[@Bassboy1972]

Mine had 1 blue washer in it and it seemed very thin with some minor deformation. I put the white washer in along with a Hunterworks belt. I can’t wait to ride!

[@Tri-Lobe]

Another great video and as always very informative. Thanks for always trying to improve things.

[@Hunterworks]

Thanks!!!

[@bradhill5822]

Ditto what Russell said!

[@vlo9079]

Love these vids

[@wadsworthclapp4431]

THANK YOU!!

[@rcastorena]

Love and appreciate your videos! I have made a few purchases from you already with great results. Care to spill the beans on which belt is too short? Which brand? I have a guess and it rhymes with Crates!

[@Hunterworks]

yup

[@5635randy]

I had them all my whole clutch came from Polaris with all the clutch and belt off and first belt blew in less than an hour second in 15 minutes dealer kept new razor for a month to resolve the factory defects.

[@newlion7013]

Awesome videos. Can u do a video on the mods you suggest for the rzr 1000 clutch? Maybe like a #1-#10 order on what to do first, for those of us that are on a budget.

[@Hunterworks]

Not really sure there is such a thing, there is very to do. You can look at our site and see the products, really just this washer, better secondary rollers and a clutch kit if you need one

[@newlion7013]

Thank you, I will be ordering

[@bigsteve973]

After I just did the second blue washer

[@Hunterworks]

Sorry about that, improving stuff is not always timed right.

[@jasonsoutdoorsports8632]

Thank you for the great explanation!!! I have a 2019 rzr turbo is there a way for me to tell if it’s got this problem I do do 80+mph a lot

[@Hunterworks]

This video is not about turbo's but we have a few on the turbo, however if you are not blowing belts you are good on a turbo.

[@Rcaceres]

Just brought 2 blue ones because of your other video 😩

[@Hunterworks]

RCaceresVlogs it’s same thing as one of ours. You’re good

[@Rcaceres]

Hunterworks Inc. yes but you see you spent 5k on washers I could of helped with that. 🤣 I just started watching your videos. Great info! Thank you!

[@michaelpkibodeaux2593]

Dam an I just added the extra blue well ill get 1 for next time washer

[@klang35]

Love the videos. When you say “limit speed”, What speeds are you seeing now?

[@Hunterworks]

Doesn't change it, the stock spacer is called a speed limiting spacer, hate the name

[@lesterbowers1005]

I added the white washer to my 2019 General 4. I pulled the belt just recently and removed the cover. I was blowing the dust out of everything. The white washer was not held in place by the spring. It was actually in the middle of the shaft. Suggestions? Comments?

[@Hunterworks]

Lester Bowers nothing spring doesn’t hold it. It floats on shaft.

[@lesterbowers1005]

@@Hunterworks Thank you, I was worried. You guys are the best.

[@warrantykillermotorsports3569]

Hey bud I just bought your belt and I saw the white washer, so I am visiting this video. My primary clutch never had a washer 2020 polaris general 1000 eps. Also ive never blown a belt. If you go to my page you can see my ride. I have 4 inch portals with 30% gear reduction and a 10 inch lift on 35 bkts. Also i have a mudder clutch kit with I believe 67 gram weights. Seems I like to glaze belts. I have to be very precautious using low because I will spin a belt in high. I've never blown a belt. And it still goes about 55 mph. Do I need this washer? Will it help with belt spin or do I maybe want that long travel engagement? Thanks! Great videos

[@warrantykillermotorsports3569]

My issues seems to be at start going over a log or on an incline. Like I said I try to use low. Sometimes it seems like it shouldn't need it though.

[@davidwason627]

The white washer has 2 different sides , does it make a difference if white vs translucent side is against the spring ?

[@Hunterworks]

David Wason no side. Cutting it did that

[@michaelleonard4661]

I just bought a 2012 900 rzr 4 seater and the guy told me he had put 3 belts on it on 3 trips out riding i just rode it around the house and it broke one on me will this help me out or do u think i need new clutches

[@Hunterworks]

I can't answer that, use our how to trouble shoot the primary clutch and secondary clutch videos to look for issues.

[@angusyoungsg]

are the 2 blue washers or 1 hunterworks white washer needed on a 17 ranger xp1k? we have the factry speed limiter tuned out

[@Hunterworks]

probably not, won't hurt though if you gonna run top speed or over 60 for a while

[@nawshiz951]

Will this work for the STM rage 6. I keep blowing belts at high speed, if i even get over 50 before temp spike

[@Hunterworks]

No sir, we are not fans of that clutch

[@lesterbowers1005]

So what does the white washer "do" if it is floating on the shaft? New to all of this clutch stuff.

[@Hunterworks]

Lester Bowers stops clutch travel

[@lesterbowers1005]

@@Hunterworks Thank you!

[@sonnyhelms2962]

Is this an issue with the Polaris Xp Turbo S Velocity if so I will get the washer and change it out.

[@Hunterworks]

This video is not about Turbo’s

[@sonnyhelms2962]

@@Hunterworks oh ok so is there an issue with the turbos like this ?

[@Hunterworks]

@@sonnyhelms2962 yes. We products and videos for all years of turbos.

[@Fenderstratosphere98]

My god I can’t get that main screw off the main clutch.

[@Hunterworks]

bigger impact, wasting time with a socket or wrench

[@thomascorsiatto331]

By adding the washer do you loose top speed?

[@Hunterworks]

Thomas Corsiatto no think I covered that in video

[@juliansaunders6163]

Would this effect the new sportsman s ?

[@Hunterworks]

I would not know, we have not looked at a sportsman, we mostly do UTV's but we do have a belt for a sports man 850/1000

[@charlietuggle793]

Just purchased a 2022 1000xp rzr. Do i need the washer?

[@Hunterworks]

You would need it for the same reason any other rzr XP 1000 per the video and you still certainly need Square pucks removed from your secondary and put our rounds rollers

[@charlietuggle793]

@@Hunterworks Thanks for the quick reply, will be upgrading soon :)

[@alexjrful]

Will ur washer work with other belts or just ur brand ?

[@Hunterworks]

We include it with ours but they all can benefit if you are a high speed rider or low ranger high rpm person

[@alexjrful]

Thank u.

[@KernelSanders1967]

Any similar issues with General clutches?

[@Hunterworks]

Bill Altenburg applies to it too if you are high speed or high rpm in low

[@Hunterworks]

Yes see our other videos the one on the white washer

[@choppacity4348]

After my 3/8 bolts came off my plate didn't come off why ?

[@Hunterworks]

corroded on, If you have a secondary spring compressor, put in it so it does not fly apart at you when start tapping it from the bottom of the cover

[@choppacity4348]

@@Hunterworks thanks I'll try it this weekend

[@jamespittman1153]

Is this necessary for the turbo model also?

[@Hunterworks]

Kinda but not this washer, the turbo fix is coming

[@Hunterworks]

Kinda but not this one the turbo fix is coming

[@danielmendoza-kd7ot]

@@Hunterworks rzr4p 800 ? the White washer its plastic ? am out of usa can i made it?

[@Hunterworks]

@@danielmendoza-kd7ot 800 does not need it

[@gersonperez3252]

Does the turbo s need it? Thank you

[@Hunterworks]

not the white, we have another video and different washer for it

[@gersonperez3252]

Hunterworks Inc. thank you

[@code3responsevideos872]

I can be one hundred percent say it takes years to get the feel of using an impact and getting proper torque

[@Hunterworks]

I agree however what do you hold these non turbo clutches with that you don’t risk having the spider and nut turn while torquing? The answer is nothing

[@code3responsevideos872]

@@Hunterworks good to know about I haven’t done one myself just trying to learn everything I can. Can you do a video about belt dust, slipping, cleaning in the field and cleaning in the shop?

[@Bag22Douche]

Why wouldn't you make it out of metal? most plastic breaks down and warp from heat

[@Hunterworks]

Can't have metal on metal slamming against each other and our new washer is very durable for this application

[@sagamanic3083]

I'll be buying one too, than you......Dad😒

[@treybrown7815]

Yy