Thanks for that detail about using the pick to remove the connectors! I watched 3 other videos before yours and couldn't get it detached to save my life.
@fcpeuro Жыл бұрын
Glad we could be of some help!
@CaptainMudDonk11 күн бұрын
I opted to just snap the connectors off.
@thelughxperience6971 Жыл бұрын
I am so glad people still own and work on these vehicles because it is hard to find any information on them now days without scouring YT
@aob1000013 жыл бұрын
Thank you from a first time owner I LOVE THE IN DEPTH
@histatimaniples2 жыл бұрын
Why did you you use the wrench after torque wrench?
@sammysommanas56192 жыл бұрын
Thanks for not speaking so fast and taking your time to show us
@mikehawk96263 ай бұрын
💪I really appreciate this Video and I sincerely THANK YOU for the Coils, Sparkplugs & Injectors I ordered from you guys for my 2004 VW Beetle 🪲 and installed myself because of your helpful directions👍Nick Rose Louisville Kentucky USA 🇺🇸
@fcpeuro3 ай бұрын
We appreciate your support and are glad we could help!
@stevejanka3613 жыл бұрын
Good evening, excellent presentation. I can understand you and your explanation. Thanks for a great video this afternoon. Take care and good luck.
@boogx90358 ай бұрын
Does upgrading your could packs and spark plugs change anything with your engine or harm it if you are stock/ no tune
@jakboi65296 күн бұрын
Don’t upgrade coil packs or spark plugs try to keep them oem or best brand , unless you have mods or tune which you don’t
@jjt1093 Жыл бұрын
Question is this typically the same for the 2.0L version 2003 passat
@rafaelsilva25536 ай бұрын
Exelent video, exelent explanation easy to understand Thanks Amen
@fcpeuro6 ай бұрын
Thank you for watching!
@tiNtiN113 жыл бұрын
The big question enthusiast have is if the 2.0T conversion has any benefits over the 1.8T coil packs?
@vr12v83 ай бұрын
they look better that’s the only benefit
@rhodesnewby81862 жыл бұрын
helped me tons with my car! TY
@jayteague96604 ай бұрын
What was the point in using the torque wrench when you hand tightened it afterwards? 🤔
@fcpeuro3 ай бұрын
Some people may not have a calibrated wrist and will want to use the torque wrench to avoid any errors.
@bigking39162 жыл бұрын
What happens when of the clips break is there any other way to take it out?
@stormiiclouds5984 Жыл бұрын
Mine is broken a little bit, was able to wiggle it with a screwdriver and just pull until it came off
@emotionalintelligence7767 ай бұрын
Its 2024 and it STILL needs to be said. Always check your plugs for damage and ensure the required gap is correct on each plug, assume and youll be the first to know.
@brandonjoseph14892 жыл бұрын
Thanks. Trying this tomorrow
@-Ro. Жыл бұрын
when would non foulers be used ?
@bthemedia Жыл бұрын
My ignition coils were hard to remove, all reinstalled fine except one… could not get the coil to set down all the way… kept popping back up.
@pepitoperez78692 жыл бұрын
which reference of ignition coils for an Audi s3 8L with BAM engine 2003 I bought the wrong ones -_-
@fcpeuro2 жыл бұрын
Hi Pepito, feel free to reach our service team via email at service@fcpeuro.com. With your VIN they may be able to decode what part number you need, as we are not set up for that vehicle on site.
@remorlrrlrll6945 Жыл бұрын
What's the firing order
@ibrabimragabibrahim37162 жыл бұрын
please advise me what code for spark plugs should i use for my Golf 4 1.8 turbo (AGU) ??
@ericacarpenter469028 күн бұрын
What’s the firing order?
@fcpeuro26 күн бұрын
For the 1.8T: The firing order is 1-3-4-2.
@joseaguinaga8352 жыл бұрын
torque specs on plugs please.
@fcpeuro2 жыл бұрын
Hi Jose, at the 7:39 mark, Jason notes the torque spec to be 30nm.
@joseaguinaga8352 жыл бұрын
thanks.
@mikehawk96263 ай бұрын
If you happen to be in America it's 23 Foot Pounds I almost didn't catch that when he said Newton Meters
@daltonkelly93072 жыл бұрын
Thanks
@drluisgoncalves2 жыл бұрын
Who makes volkswagen spark plugs?
@histatimaniples2 жыл бұрын
Bosch
@mikehawk96263 ай бұрын
NGK
@سلطانالمغربي-ه9ط3 жыл бұрын
First like first comment😎👍🏽
@marcelpinkster Жыл бұрын
Plugs way to tight. .reed the ngk box. Dont need a torq wrensh.☺️