VRSF Downpipe Install BMW 428i N26 (F33)

VRSF DP - tinyurl.com/y7knkddx
In this video i will show you how to install a VRSF catless downpipe. I will also include what it sounds like after installation.
Don't forget to like, share and subscribe, Thanks for watching!
Instagram: @metoy3r
All F33 Mods:
Gloss Black Kidney Grills- amzn.to/2ZAjeSU
Carbon Fiber Eyelids- amzn.to/32riu4b
Carbon Fiber Mirror Caps- amzn.to/2OxzWfi
Sequential Turned Signals- amzn.to/3fwmGn7
Smoked Taillight Wrap- amzn.to/3jdIDte
Red VBar Wrap- amzn.to/3h8x70E
Carbon Fiber Wrap- amzn.to/3hav2kT
Smoked Reflectors - amzn.to/2Wp7z7C
Rev9 Dual Exhaust -
Carbon Fiber M Diffuser -
Rennline Phone Mount - tiny.cc/adlrjz
Spoiler -
Injen cold air intake: tinyurl.com/yauc66zb
VRSF DP - tinyurl.com/y7knkddx
Emblem Vinyls- amzn.to/2OxF2bq
Pedal Covers- amzn.to/3fB13SP
BMW Shadow Lights - amzn.to/32mt3pn
BMW Front Brace Left - tinyurl.com/y8unmxol
BMW Front brace Right - tinyurl.com/y83tccez
Other Products:
Shine Armor- amzn.to/395k3GE
Windshield Wipers- amzn.to/3fChPkm
Vgate OBD Car Port- amzn.to/3fN9bPS
Trim Removal Kit- amzn.to/2DN5dsx

[@jsingh4272]

bro ngl this was probably the best install video I've seen on how to install this dp

[@Metoy3r]

I appreciate that man

[@juano5797]

Sounds amazing bro

[@kyleyang4535]

Thanks bro! I’m going to have the rev9 exhaust on my 428i after watch your video! Keep going bro!

[@maliqwilson9554]

What year?

[@malarryya]

YO you just helped me find a sound I have been searching for EVERYWHERE. 12:02 I can't express the coincidence of this- incredibly grateful. THANK YOU.

[@Metoy3r]

It’s a super annoying sound! Glad I could help though!

[@victimlol]

how did you end up moving the e-brake cable? having the same issue on my 3series. took it to BMW and they tried charging 1100 claiming they had to remove the drive shaft just to replace e-brake clip.

[@malarryya]

@@victimlol Honestly, it's not easy at all of you don't drop the driveshaft. You'll have to lower the gas tank as low as you can to get the new clip over the bolt. Definitely want either a lift or some nice jackstands

[@victimlol]

@@malarryya do you know if theres a video online anywhere that shows how its done? i'm not tryna blow 1100 at BMW

[@malarryya]

@@victimlol No videos my man

[@dennyfl2241]

Sounds sick

[@Lukethepuke-hi7hp]

Another banger 🔥🔥🔥

[@Metoy3r]

Thank you bro

[@groenesmurf6193]

Great detailed video bro !

[@Metoy3r]

Thanks a lot!

[@201shrimpy]

This was the best instructions

[@Metoy3r]

Thanks man I appreciate it

[@JLEEPNW]

I think you did a great job man it sounds great to me.

[@Metoy3r]

Thank you bro!

[@anthonypipia6990]

@@Metoy3r two questions, how is the performance? and how did you get rid of the check engine light? Thanks!

[@Metoy3r]

@@anthonypipia6990 the performance is better with the downpipe. I would say easy 15-20 hp. And I got ride of the CEL with the tune that I did. You won’t be able to without a tune unless you just want to clear the code some other way

[@anthonypipia6990]

@@Metoy3r I was thinking maybe use foulers to trick the computers, not sure if you’re familiar

[@mrfacts824]

Cant wait to put this on my beemer and also get bootmod3

[@malikjones9938]

🔥🔥🔥🔥🔥

[@user-zd9ti1ij6j]

nice video bro!! where can i buy that new one clamps?? can i get serial number?? about mid pipe clamp that you bought??

[@pandaboi57]

Definitely feel like boodmod3 is coming up next or soon

[@Metoy3r]

Oh yeah man especially since I have a check engine light now

[@jorgepaniagua5469]

Was the v clamp and the gasket the only things you needed to replace I just bought a used one but the guy just gave me the pipe no bolts or clamps so I was wondering if I can re use everything else

[@201shrimpy]

Can you show how you fixed the scratching sound ? I have the same issue

[@carlosortiz3711]

I think it's better so that my car can be heard well Dual exhaust o in Jen cold air intake o Downpipe

[@KillerSalvation]

definitely tune your car, I have a 428i stage 1 and it makes a huge difference from stock. stage 2 soon

[@Metoy3r]

Yeah stage 2 is the plan!

[@christiansam6597]

Hey man how do you make it into a stage 2? that is intresting i have a 430i and want more power!

[@KillerSalvation]

Christian Sam KZbin bootmod3 it’s a tuning platform for these cars

[@christiansam6597]

Thank you!

[@lilviethmer]

Do I need to replace both clamps?

[@Vexulus]

Yo what’s up after installing I’m having a stall at high acceleration it stalls and then back fires from exhaust help if you can would be great air intake Chargepipe Vrsf Down pipe

[@Metoy3r]

Hmm have you checked your seals where the clamps are? To make sure there’s no boost/exhaust leak? Also did you change the gasket ring?

[@fongfuning3564]

Hello , good to find your video. Very helpful video. I have a question, do you get a engine warning light on? 😊 thanks

[@Metoy3r]

Yes this install will cause an engine light to come on. It can only be removed with a tune

[@fongfuning3564]

Thanks alot.

[@iam_jcr]

what tune did you use?@@Metoy3r

[@christiansam6597]

Hey man great video, do you feel the car faster? performance?

[@Metoy3r]

Yes I definitely felt a gain in power after installing this downpipe

[@rider3844]

Did you end up liking this mod for the car ? Would you recommend thanks in advance.

[@Metoy3r]

Yes it was a great mod and I definitely do recommend it!

[@MadebySharuk]

Did you ever experience a drone while driving? How was the smell with this set up?

[@Metoy3r]

No drone at all!

[@prestyns8235]

Was this car xdrive?? I want to do it to my 2020 430i but I heard it’s hard with xdrive because of the front trans?

[@Metoy3r]

This car is rwd but it should be similar install on xDrive

[@bensafavinia8661]

Did you get the check engine light after installing this downpipe? And did the bracket holdings line up with the bolts?

[@Metoy3r]

Yes I did get a CEL with the downpipe. And what bracket holdings are you talking about? This VRSf down pipe did require a bracket

[@bensafavinia8661]

@@Metoy3r Not really sure, looks like if you try an install an N20 downpipe on N26 the bracket holdings don't line up with the bolts. Thanks man and the car sounds great.

[@Metoy3r]

The one I purchased for my n26 fit like a glove. Thanks man I appreciate it

[@bensafavinia8661]

@@Metoy3r Hey bud, one more question..did you ever cut out the second cats that N26 has (between the downpipe and the resonator)? I feel like if N26 is catless downpiped there is going to be a lot of pressure on the second cats that N26 has and it might trigger some issues

[@Metoy3r]

I personally have no cut the secondary cats! I haven’t had issues this far but I will look into that, thanks

[@antebrekalo3108]

Can you please tell me how good is acceleration on this car? Cause the car is kinda heavy and i'm thinking of getting one. If you catch time could you film video about that?

[@Metoy3r]

I actually think the acceleration is on of this cars strong areas. It is really quick but I feel it struggles in the higher gears. Acceleration is great though

[@antebrekalo3108]

@@Metoy3r thanks man. 6.5 (acc.on autodata.com). That is actually pretty good.

[@machucast]

@@antebrekalo3108 Faster than that, i get 5.3-5.6 consistently on my stock n26 F30.

[@antebrekalo3108]

@@machucast Yeah, but this is convertible and convertible is heavier than f32 coupe or f30 for around 250kg (550 pounds)

[@dionesito25]

Question is the N20 downpipe the same exact as for the N26?

[@Metoy3r]

yes usually they are one in the same. just make sure before you buy it you check with the manufacturer

[@carlosdavidd23]

Hey bro, will I have a check engine light when I install the catless down?

[@Metoy3r]

Yes for sure it will

[@bbgregs1452]

what muffler is that ?? dope set up

[@Metoy3r]

Thanks! It’s called the rev 9 axel back exhaust with muffler delete. Link is in the description of my exhaust video

[@NotXenofyy]

How did you move the e brake cable away?

[@Metoy3r]

I had to remove the heat shield toward the back of the car and then reached around the drivetrain to get to the broken clip.

[@christiansam6597]

did the downpipe cause your checkengine light to turn on?

[@Metoy3r]

Yes I now have a Check engine light but I plan on getting rid of it when I tune my car

[@iRVvyBaun]

Did you do an exhaust upgrade?

[@Metoy3r]

Yes it’s the first video on my channel

[@FEARTACOREACTS]

arent cat deletes illegal ? i wanna get this but a lot of people are saying not to

[@Metoy3r]

Yeah they are only meant for off road use

[@JCod306]

So how was the fuel smell after switching to catless? No codes?

[@Metoy3r]

Catless will definitely throw a check engine light but on the n20/n26 engine in particular the gas smell wasn’t too bad. Noticeable change but not terrible or unbearable

[@JCod306]

Awesome, thanks! My understanding is that the check engine light can be coded out, do you know if that’s true?

[@BrownNProud781]

what tune would you recommend bro?

[@Metoy3r]

All depends on what your power goals are, but message me on Instagram @metoy3r

[@supbrobanjoban]

Should I buy new clamps just in case?

[@Metoy3r]

It’s never a bad idea to buy new clamps, especially if you suspect rust. Better to be safe than sorry

[@mrwap9517]

A catless DP causes a check engine light, how did you manage to sell it with this?

[@Metoy3r]

Put the stock one on before I sold it

[@severns75]

@@Metoy3r so adding the catless down pipe did kick a cel ? Thinking of getting one for my car but don't want to have to flash it to remove cel. I understand from what I have read that the stock cat it very restrive and you get better spool if you change it to something aftermarket. Just trying to find some information on this.

[@Metoy3r]

Yeah a cat less will def throw a CEL. If you don’t wanna tune it I suggest getting a different app that can clear codes

[@severns75]

@@Metoy3r I currently have Beemercode for it but probably no way to code it out thur there. But if you clear it out with a scanner it most likely just return after some driving time

[@Metoy3r]

Yeah I don’t know any other way too permanently clear it without a tune

[@AG-pu3bk]

What is the item number for the clamp?

[@malarryya]

Part Numbers for this entire install Genuine BMW Exhaust/Muffler Clamp; Front: BM-18307606136 Genuine BMW Exhaust Muffler Clamp; Rear: BM-18307628660 See this website for verification: www.realoem.com/bmw/enUS/showparts?id=3N73-USA-06-2014-F32-BMW-428i&diagId=18_0987

[@Gurbalert]

Are you muffler delete too?

[@Metoy3r]

Yeah in this video I had a muffler delete axle back exhaust

[@realone9372]

Do I need to 2 set of v clamps and 2 gaskets? Or what do I need

[@Metoy3r]

Although you don’t NEED new clamps it is definitely recommended. And I would get a new gasket

[@realone9372]

@@Metoy3r it’s just one gasket correct?

[@Metoy3r]

Yeah there is just one gasket that connects to the turbo side. The midpipe side doesn’t have a gasket

[@realone9372]

@@Metoy3r thanks so much bro subbed!!!

[@josephmoreno3340]

@@Metoy3r do you happen to know the item number for the new clamp you decided to purchase?

[@steevynovirus_f3099]

What about the check engine light and snug

[@Metoy3r]

The tune takes it away

[@steevynovirus_f3099]

@@Metoy3r so no problem to pass smug after bootmod3 ?

[@Metoy3r]

I didn’t have to pass smug here in AR

[@Trexide]

How did you move the ebrake cable?

[@Metoy3r]

It’s underneath next to toward the rear wheels. I had to remove some of the heat shield and saw the clip had broke. So I ended just zip tying the cable to the broken clip and that fixed it

[@Trexide]

@@Metoy3r Alright thanks good to know