Nice info on the Torque multiplier tool. 👍 You have me confused, with vintage speed vw, or maybe he give you the same info.
@SladesVWBeetle Жыл бұрын
Oh geez!! My apologies, but I actually did confuse myself lol those nicknames are very close. IT WAS YOU! And I do appreciate your advice! This getting older thing is not very much fun lol
@vintage76vipergreenBeetle Жыл бұрын
@@SladesVWBeetle No problem. I got confused also. Sometimes other members post same/good comments on how to fix things. Glad to pass the wisdom/experience on to others.🙂
@SladesVWBeetle Жыл бұрын
@@vintage76vipergreenBeetle well I certainly do appreciate it that’s for sure. And appreciate you being here.
@hsquier26384 ай бұрын
Thank you so much. I'm restoring an old plane powered by a 1600 VW. Your videos are so helpfull.
@SladesVWBeetle4 ай бұрын
That is so awesome! I knew they were used in planes many years ago, but I didn’t know enough about it. Thank you so much for being here!
@eduardorodriguez3262 Жыл бұрын
You're the encyclopedia Britannica of the VW community of the interwebs.. I feel smarter already. I'm gonna say another smart thing...." Great informative video" Keep them coming👍🇩🇪
@SladesVWBeetle Жыл бұрын
Thank you my friend, I truly don’t know everything that’s for sure. But what little I do know, I try to put out there.
@williamtanner1372 Жыл бұрын
That torque tool is amazing. Makes working on VW parts ever so much easier. Great video!
@SladesVWBeetle Жыл бұрын
It truly is my friend, also it’s great for breaking loose the old 36MM nuts on the drums.
@Nathriel9 ай бұрын
Glad you covered this. Although I have a drive plate on my autostick super beetle, I am glad you took the time to show each step clearly. I'm having to fabricate special metal pieces to lock the driveplate to the engine so I can torque it down, wish me luck! Always great watching your channel on how to do stuff, thanks.
@SladesVWBeetle9 ай бұрын
And also, thank you for taking out the time to leave a comment, I truly appreciate that. You got this, my friend, think, confident, and move forward slowly.
@90abcde5 Жыл бұрын
i just did mine. I bought the torque converter which made my life so much easier. the tool made it so easy that i had a hard time believing that the gland nut is torqued to 250 ish ftlbs.
@SladesVWBeetle Жыл бұрын
Right?!?! I should probably do a dedicated video to this tool, some more people know about it. Honestly it has saved my butt, while trying to get some cranky drum nuts loose.
@briansmythe3000 Жыл бұрын
This series is great Timing Mr and Mrs Slade Bess has a striped spark plug while I've got the head off I'm going too get new barrels and Pistions Top end rebuild First time I've had the Motor out of Bess your tips have come in handy already Thank you my friend
@SladesVWBeetle Жыл бұрын
I’m glad it’s helpful Brian! The heads are getting new valves put in, wish he would’ve let me do those for the videos lol we’re going to the salvage yard this week, me and Heather. So in a couple of weeks I will continue putting the engine back together on video.
@pstreetgarage7304 Жыл бұрын
Great detailed video Mr Slade. I had to chuckle when you said you forgot to press the play button.... If something's going to go wrong, it's when a dang camera is involved 😂
@SladesVWBeetle Жыл бұрын
Right? That’s not my first rodeo with doing that. One time I forgot to hit the record button, half hour went by. I then realized I had to take everything back apart and do it all over again lol
@pstreetgarage7304 Жыл бұрын
@@SladesVWBeetle Hahaha ya. I know the feeling..... Or having good footage and losing it 😭🙄
@plumblevelsquarebear81476 ай бұрын
@Slades VW Beetle Love the big hammer go to for pictorial reference.
@tedbrocious6891 Жыл бұрын
Another informative video. Always a pleasure to watch and learn something new.
@SladesVWBeetle Жыл бұрын
Thank you my friend, and thank you for always being a great person!
@douglasbarnhart3324 Жыл бұрын
Thanks for the video Slade!! Have a great weakend we're ya on the next one.😁😁
@SladesVWBeetle Жыл бұрын
Thank you my friend, headed to the salvage yard this week with Heather. Hopefully she don’t bring anything home
@gordondonahue4810 Жыл бұрын
Ok. I’m going to say something smart. Cancel that; I suddenly realized I’m not that smart. 😂. Seriously though good vid. 👍
@SladesVWBeetle Жыл бұрын
Thank you 😂😂
@MikeMoose67 Жыл бұрын
Great video can’t wait for the salvage yard trip!!!
@SladesVWBeetle Жыл бұрын
Thanks my friend! We are going Thursday or Friday, that video will be up the following week. Hopefully Heather doesn’t try to bring anything home. 🤦🏼♂️
@UncsPlacePerformance Жыл бұрын
Nice video!! Please keep the valuable info coming!!
@SladesVWBeetle Жыл бұрын
Thank you Lee, and thank you so much for being here
@styverdyver Жыл бұрын
I've been following your series with the idea of pulling my engine to work on the heater boxes and install the engine tins (that were not on when this beetle was purchased). I was happy to see the blue mount on your engine stand. I am planning on purchasing a stand and use the bench stand mount with it for the space to work on the flywheel if I chose to do that.
@SladesVWBeetle Жыл бұрын
I bought my engine stand at harbor freight. Since beetle engines are really not that heavy. The only thing I regret is I didn’t buy the four-legged stand.
@styverdyver Жыл бұрын
@@SladesVWBeetle I plan to get the HF/4 wheeled stand. I had heard about the 3 wheeled ones tend to want to easily tip over when moved.
@SladesVWBeetle Жыл бұрын
@@styverdyver Yes, that’s exactly my concern. I will go with a four legged one next, and probably give this one to somebody. There’s nothing wrong with it, but I do a lot of awkward stuff lol
@davidryan573 Жыл бұрын
A lot of great information, thanks for the video.
@SladesVWBeetle Жыл бұрын
And thank you for being her David and taking the time to leave a comment.
@FixinBugsNStuff Жыл бұрын
Great job on the video! Very specific.
@SladesVWBeetle Жыл бұрын
Thank you my friend I truly appreciate that.
@rscruiser3533 Жыл бұрын
Thanks Slade --- You mentioned you didn't like the three shims you took out --- what was wrong with them? --- You put them back in --- I've heard you say before that there will always be THREE SHIMS ---- If two or four gives you the three to five thousandths that is needed for the end play? ------ Snow and nineteen degrees ------ Rodney
@SladesVWBeetle Жыл бұрын
Honestly I was just being picky, they had a couple of scuffs on them. So I’m kind of strange like that. I have read it in many places, where you always want three. You never want more, or less. I read it in so many manuals that it’s stuck in my brain
@Fastvw1 Жыл бұрын
It is the front notice the front 2 cylinders 1&3 even the bentley book says it. Not hateing
@SladesVWBeetle Жыл бұрын
I didn’t take it as hating, I appreciate you leaving a comment. I’m not the type of guy that gets upset over stuff like that. Truthfully you are right, but when I say the front then everybody gets all confused lol thanks for being here.
@danielwooten57794 ай бұрын
Slade, you have been my life saver of my 73 Supper Beatle. However, the engine and I have come to an impasse. I cannot for the life of me get the flywheel gland nut off. I've broken my breaker bar and pipe and can't get it to come loose. I'm really reluctant to put any air tools on it, because I don't want to damage the crank. Any suggestions would be extremely helpful.
@GereDJ26 ай бұрын
What is the exact purpose of the 3 shims? And what is the danger of reinserting then not in the exact order in which they were removed? What is the typical life span of a rear main seal?
@livinthelife6056 Жыл бұрын
Good video
@SladesVWBeetle Жыл бұрын
Thank you Bob, and thank you for commenting.
@dangibala5122 Жыл бұрын
Doesn’t using a deep well socket change torque ratio? Awesome video keep em coming
@SladesVWBeetle Жыл бұрын
Thank you Dan I truly appreciate that. If they deep well with change it, it would have to be very slight. Not enough to worry about. When you start using extensions, that’s when it changes it a lot more.
@pawleymediaconsultantsllc55 ай бұрын
Three years ago, you recommended used dielectric grease on the seal. This time you recommended oil. What changed your mind ?
@SladesVWBeetle5 ай бұрын
Nothing changed my mind, you can use either one. I like the dielectric grease because it doesn’t corrode the rubber which you already know that from me repeating myself. But I need a new tube of the dielectric grease
@pawleymediaconsultantsllc54 ай бұрын
@@SladesVWBeetle I've had great success with your dielectric grease suggestion :)
@jimstewart6145 Жыл бұрын
nice job.
@SladesVWBeetle Жыл бұрын
Thank you Jim I hope you’re having a great day
@beetleworks738 Жыл бұрын
I have a matco beer mug
@cjjones1556 Жыл бұрын
I don't think my chair goes that high. 🤔 May have to put a lift kit on it. 🤘
@SladesVWBeetle Жыл бұрын
I’m actually surprised how nice that says, I just hope it holds out for a while.
@rscruiser3533 Жыл бұрын
One last thing to my earlier comment --- since you have a 250 Ft; Lb. torque wrench -- have you ever followed up and double check the Torq multiplier and your standard torque wrench to see if there is a difference in torque between the two?- Rodney
@livinthelife6056 Жыл бұрын
I have been wanting to do the same to verify the torque multiplier . When doing the drums mine seems sloppy and wanted to check the accuracy.
@SladesVWBeetle Жыл бұрын
Funny you brought that up my friend. I should have put that on video. I didn’t think to, so that will be a good shorter video that will be consistent five minutes maybe. I will tighten up with the torque multiplier, then use my torque wrench with the needle, and then use my clicker torque wrench. And we will compare notes. Good idea Rodney.