VW T5 'Restoration' Ep.8 Spraycan Respray Reassembly Paint Transporter Paint Rattle Can Aerosol

[@paultaylor9652]

Lovely Jubbly, have to agree with others, either paint the other red bits grey, or satin black, but what a great place to work on dry sunny days.

[@DanChambersDAC]

Thank You for watching! None of the red areas will be visible once all of the trims are on and the bonnet is closed!

[@grahamsmallpeice1212]

Great job. Enjoyed watching the progress of this project. I know it was a while ago but fantastic transformation. Looking to get out first VW T in the coming months. 👍🏼

[@2spoons]

Absolutely phenomenal job Dan - I've only watched 8 episodes so far, but I hope you have you're own business now from it - this is an epic job.... very impressed

[@DanChambersDAC]

Thank you so much for watching and for the comment! I plan on doing a few more of these van's over the coming months. I also have a brand new VW Crafter being delivered in October tho convert into a motorhome for a friend!

[@artursbanks296]

Boiled linseed oil works well on the black bumpers. Mine was really faded and good rub with it brought it back to nice black.

[@DanChambersDAC]

Thank You for watching! I considered a few options, the front bumper was pretty rough with scratches etc, I blended them and paint felt the best option! Will defo consider this on a future project though.

[@glennclark4212]

Looks very cool.. Love those wheels on a van.. Like the colour too suits it! Good work 👍🏻

[@DanChambersDAC]

Thank you for watching and for the comment bud, Such a simple clean look. I am considering another build of this type as a daily driver....

[@towley737]

Just binged all these vids, great job. I just bought a cat s shuttle 2009. Been looking at the budget coil overs, I think you've convinced me they're ok. Keep up the great work. Ady.

[@DanChambersDAC]

Thank you for watching and for the comment! Nice, I assume it has the Caravelle front end? One of the best fronts they did 👌

[@towley737]

Once maybe! Someone's fitted a 5.1 sportline snowplough front end, all black looks kinda cool though.🤙

[@davidjames89]

Yes! That looks awesome, well done mate. What a transformation.

[@DanChambersDAC]

Thank you so much for watching and for the comment!

[@carguyuk7525]

Looks great with the trim fitted. Great project. Thanks for sharing.

[@DanChambersDAC]

Thank you for watching! Hasn't turned out too bad has it!

[@paulolouro7300]

Its very Nice your Transporter van! Congratulations

[@DanChambersDAC]

Thank you for watching!

[@daibennett9224]

I only found your channel a few days ago ,and already watched all of this build,it’s great I love it,looking forward to see the finished inside as well,love t4 5s & 6,looking forward to the next project as well,so much interest in these great vans

[@DanChambersDAC]

Thank you for watching and for the comment! hoping to have it somewhere near finished soon!

[@jamescoleman5195]

Great video mate and hats off to u doing it yourself and I love the colour all the best

[@DanChambersDAC]

Thank you so much for watching and for the comment!

[@Pushh92]

I might need to paint my own t5, that colour is bang on for t5 😎

[@skinboable]

I used a hot air gun on my old Ford Ka bumpers (gets rid of the oxidants apparently) it seemed to work well. Nice vid again Dan

[@DanChambersDAC]

Thank you for watching and for the comment! I was going to try that but the bumpers had a few scratches!

[@garyprice464]

Nice just binge watched the whole series very well done mate

[@DanChambersDAC]

Thank You so so much for watching!

[@AJCFilmproductions]

Looks mint! Bowdens an Australian car cleaning company has a new plastic blackener, contains a little bit of a dye and lasts a year, best I’ve seen so far

[@DanChambersDAC]

Thank you for watching! Thank you for the recommendation, Will give that a look!

[@russcurrie72]

You have done a cracking job, I personally think the colour is ace and should imagine the van will be snapped up, I would buy it 🇬🇧😎👍

[@DanChambersDAC]

Thank you for watching! I have had so much interest in it already! going to have to build a few more to keep people happy!

[@G0WZB]

My ocd wants to spray the rest of the red bits, I know they will be hidden but id know they were there lol

[@DanChambersDAC]

Thank you for watching! 😂 I know what you mean.

[@avocado71]

Just ordered clips for the sliding door rail! Thanks for the link!

[@DanChambersDAC]

Thank you for watching! Glad you got some! small little bits like that can be a pain to source!

[@alexfaulds7070]

well done mate, looking brilliant.

[@DanChambersDAC]

Thank you for watching!

[@pault5.143]

Well well well you done your self proud I think it looks brilliant and for the time you do it in , look forward to your next project TOP MAN 👍

[@DanChambersDAC]

Thank you so much for watching and for the comment!

[@OAPMrTickle]

I like the primer look. She looks MINT!

[@DanChambersDAC]

Thank you for watching and for the comment!

[@johnnyvella5508]

Hi Dan nice job the van looks cool

[@DanChambersDAC]

Thank you for watching! Pleased with it so far!

[@garywright9053]

Very nice useable van mate great job for what you started with things don’t always have to be perfect to look good 👍👍

[@DanChambersDAC]

Thank you for watching and for the comment! Exactly that! Looks much better than it did!

[@raiffelwurr3837]

Just found your channel, and starting from the beginning. Not a fan of the bumpers but paintwork looks great!

[@DanChambersDAC]

Cheers for watching!

[@peternufc81]

You've done a grand job on her 👍

[@DanChambersDAC]

Thank you for watching and for the comment! Turned out OK hasn't it!

[@simonowczarenko2891]

Just found your videos bud. Great videos and great work. Inspirational. Like the low down transporters t👍

[@DanChambersDAC]

Thank you so much for watching and for the comment. Link to the Lowdown store is here 😉 www.lowdowntransporters.com/collections/ldt-apparel/clothing

[@kashkhan6425]

Looks brilliant well done 👏 old skool way of doing things on a budget.. Love it

[@DanChambersDAC]

Thank You for watching and for the comment! Too many people just pay people to do work on vehicles now! Let's bring DIY mechanics back!

[@bmas7983]

Looks great mate. Nice job. 🙌🏽

[@DanChambersDAC]

Thank you for watching and for the comment.

[@darrenbridges2994]

Awsome series, enjoyed watching great work fella.

[@DanChambersDAC]

Thank you so much for watching and for the comment!

[@Rick-sl7iw]

Brilliant content fella only just found you on KZbin so now I’m subscribed can’t wait to see more you’ve done a brilliant job with the van looks the dogs back wheels 👍🏻

[@DanChambersDAC]

Thank You so much for watching and for the comment! Glad you are enjoying it.

[@mickhibbert]

Looks cool as Dan. Have enjoyed the series so far. You've inspired me to do something similar. Cheers mate.

[@DanChambersDAC]

Thank you for watching and for the comment! So happy I am inspiring people.

[@paulheyes653]

Im a massive fan of the amarok steels look, tamars is the best place for them too 👌. Got a lwb shuttle, but we have 4 kids and a dog, so seats are needed, going for a pop top / people carrier / camper hybrid. Some great vids here !! tempted to get a builders van as well now 😂

[@DanChambersDAC]

Thank You for watching! For the money they are such a cool wheel! Paul is a top guy too! Wow you do need plenty of seating! Can't beat a project van!

[@TonyWilliampianoman]

Well that worked out ok. Have done the same, but a LONG time ago in the 70s on an air cooled VW Van. :)

[@DanChambersDAC]

Thank you for watching! Didn't turn out too bad did it! Can't beat a cheap transformation!

[@MegaProstreet1]

Top job there boss, Should sell easy as theres a big following for anything vw and don't worry I like the primer look too lol , thanks for sharing m8.

[@DanChambersDAC]

Thank you for watching and for the nice comment! It does appear to be a colour and finish that divides people!

[@reebokman100]

Looks brilliant, you are a very skilled guy .🍺

[@DanChambersDAC]

Thank you for watching and for the amazing comment!

[@simoping]

nice job man.... nice job.... entertaining vids too !

[@DanChambersDAC]

Thank You for watching!

[@richardnorth5994]

Looks much smoother with nothing on the roof, project coming along well so far. There are sweeping indicators with drl's that I've seen on these.

[@DanChambersDAC]

Thank you for watching! Yes, i was thinking of fitting the roof rack but im not too sure now! I like the simplicity of the original headlights!

[@richardnorth5994]

@@DanChambersDAC True , I see what you mean as the body colour is subtle maybe they would stand out too much.

[@joekibble3200]

I think it looks really good! Only bit that stands out for me is the orange indicators 😬 should get black LED ones and it would look great!

[@DanChambersDAC]

Thank you for watching and for the comment! They are on the list to change at some point.

[@АлександрКолдунов-п3с]

Hi very cool made the restoration of the T5. Tell me what is the size of the wheels and tires, it looks very cool

[@johnramsell1109]

Looks mint mate well done

[@DanChambersDAC]

Thank you for watching and for the comment!

[@johncreen5957]

Love your van, love the colour

[@DanChambersDAC]

Thank you for watching and for the comment!

[@johnlad1481]

Nice work on the van dude she looks sick! 👍

[@DanChambersDAC]

Thank you for watching! Turned out OK hasn't it!

[@VL-xp8pt]

Montana with fat caps... dream team right thur! 💪

[@DanChambersDAC]

Thank you for watching! They work so well!

[@abodeless]

Colour looks awesome 👍🏻 💙

[@DanChambersDAC]

Thank you for watching!

[@rjauto7215]

1st time watching your channel and I'll tell you what you done a fuc.ing good job there fella very well done

[@DanChambersDAC]

Thank you for watching and for the amazing comment! So overwhelmed by all of the nice comments!

[@bucko6641]

looks excellent m8 ..love the vids...

[@DanChambersDAC]

Thank you for watching and for the comment!

[@Pritch75]

Just come across you on KZbin Dan,great videos mate and brilliant work on the van it looks mint 👍

[@DanChambersDAC]

Thank you for watching! Glad you are enjoying it!

[@hurleyofflost]

Fair play you’ve done a Top job mate I’ve enjoyed watching the series so far! 👌🏻 needs some swivelling GTI seats now! 👍🏻

[@DanChambersDAC]

Thank you for watching! So glad people are enjoying watching! Never thought it would be this popular! Those GTI seats were so comfortable in my first T5!

[@stewartallan4401]

Next project..... You should definitely do a Mk2 Caddy!!

[@DanChambersDAC]

Thank You for watching and for the comment! I have been considering one... Need to research the market a little to see if one would be worth it or not...

[@jonathandallimore525]

Nice build mate! Bottom left of the sliding door is dented on n the corner though 😢

[@DanChambersDAC]

Thank you for watching! Yeah missed that one 😔

[@philtucker1224]

Really nice job Dan, maybe a previous owner used a load of back to black or similar silicone trim revitaliser on some of the plastic trims, hence it doesn’t want to take paint... a mistake I made myself recently! Also you mentioned the company that did seat covers, can you mention them again when you do the interior video please?

[@DanChambersDAC]

Thank you for watching! Yes I think that is what may have happened. I did clean it with a de greaser cleaner twice but it appears to have not removed all of the product. I am going to strip back and try again this week. The seat covers are form Transporter HQ, Quality seat covers, I used them in my last van build.

[@jeffhirst1403]

looks great,really interesting to watch.thanks.

[@DanChambersDAC]

Thank you for watching and for the comment!

[@GDUBTV]

Hey man, loving your channel.. its gonna blow up... great content! :)

[@DanChambersDAC]

Thank you for watching! I can't believe how crazy it has gone already!

[@kennyhumphries100]

Decent job mate least you stripped it all… in regards to the bumpers you need to apply plastic primer(adhesion promoter)before regular primer as nothing sticks to plastic without that. Also you need to plastic prep wipe not regular panel wipe for plastic as it’s pouris and sucks any liquid in.. water and soap is also a big no for bare plastic. Cheerz for vid

[@DanChambersDAC]

Cheers dude. Tbf the paint on the bumpers held up pretty well the way it was all prepped.

[@kennyhumphries100]

@@DanChambersDAC if it works all good mate.. I have my own body and paint shop and any plastic parts are a nightmare to paint at the best of times.. heavily textured the transporter bumpers aswell usualy sand them all down smooth with 180 grit first then plastic prime and normal prime then colour wet on wet.. turn out really nice..

[@dirtyhype]

Great video buddy subscribed

[@DanChambersDAC]

Thank You for watching and subscribing!

[@kradcrew8477]

What are these Wheels ? Looks good 👍👍👍😎

[@DanChambersDAC]

Thank you for watching! These are 18x7.5 VW Amarok Steels

[@kradcrew8477]

thanks for Information, is a fantastic Look 👍

[@T8RTU]

Well done!! Good result so far and looking forward to seeing the progress. Impressive 👍 I’m also impressed by the fact you can get 7 likes in under 4mins of posting!?!

[@DanChambersDAC]

Thank you for watching and for the comment! Yes! The episode must have just been that good 😂

[@T8RTU]

Dan Chambers nothing short of brilliant 😇 great job Dan, guess they saw it at super high speed 😂😂😂. Or most likely they knew it would be top notch anyway 👍. Keep it up 👏👏

[@davidmuir2546]

Before you put the sliding door cover on its handy to take off the bung for would be the sliding door motor and seal it with tiger seal or the like as the foam seal perishes and lets in water.

[@DanChambersDAC]

Thank you for watching! I did remove the cover before I did the bodywork prep and inspected it, seal seemed fine and was still sealing.

[@davidmuir2546]

Dan Chambers yeah they dont last long and any heavy rain the water seeps in so if you do get a damp patch in that corner then at least you know where its coming from,mines a 14 plate and seal looked ok but was leaking in heavy rain...keep up the good work 👍

[@GediSpock]

Nice bus mate.

[@DanChambersDAC]

Thank you for watching!

[@GediSpock]

Been a great series. You’ve done well. I had a T4 for over 10 years. Loved it. Miss it terribly.

[@damienmcleod3059]

did you use plastic primer first on the bumpers? otherwise it will just flake off after time.

[@DanChambersDAC]

Thank You for watching! No, just prepped the bumpers and painted. It stuck pretty well this way to my last van's bumper and to a friends van.

[@toppertruthio]

I painted my grey bumpers with cherry blossom black shoe wax....it came out perfectly black,and stayed black.

[@DanChambersDAC]

Thank you for watching! I did consider this but wasn't too sure it would last/work well. Good to hear it did work though.

[@toppertruthio]

@@DanChambersDAC ys mate,i did mine 3 months ago,and there still black.i painted it on with a brush,give it a try next time.Cheers for the reply

[@mightybeanstick9872]

You mentioned some of the trim pieces not taking the paint too well - perhaps the plastic is a slightly different formulation? Maybe, if you do need to re-do them, try a plastic-specific primer?

[@DanChambersDAC]

Thank you for watching and for the comment. I went this route as I have done it before and it stuck really well... Got a plan to try and sort it now though.

[@RustyNLC]

Same colour as my van, but mine was rattle can primer 🤣, good work so far

[@DanChambersDAC]

Thank you for watching! 😂 They do look good matt, and so easy to repair!

[@monkquinn]

Looks great fairplay

[@DanChambersDAC]

Thank you for watching and for the comment!

[@johndearn9457]

Is it me or is there a dent in the bottom left corner of the sliding door, love watching the videos. Great info

[@DanChambersDAC]

Thank you for watching and for the comment. Yes there is.... missed that one.

[@bigman9950]

It would look so much better with colour coded bumpers. Good work still mate 👌🏽

[@DanChambersDAC]

Thank you for watching! I think it would be too much in the matt finish, The black bumpers break it all up.

[@Jayrizzle411]

I swear you really can't get these out fast enough, I could watch these all day. Made me want to do the same thing! Definitely not as easy as you've made it look though. Great content 👍🏻 Also please puts ads on your vids just so I feel like I'm contributing lol

[@DanChambersDAC]

Thank you for watching and for the nice comment! I need to get another project to have 2 on the go at a time! I really want to be posting 2 episodes a week but am running low on content! I was waiting to reach the magic numbers to be able to put adverts on, We managed to reach that last Thursday and Adverts went on Friday last week! Thank you for mentioning this though as i was worried it would annoy people!

[@Jayrizzle411]

@@DanChambersDAC No worries bro! Please do more of these T5 vids as they're awesome, maybe full camper conversion builds? Also im happy with ads as I can't afford to pay actual money when people do patrion and stuff like that. Keep the content coming bro, the more the merrier ✌🏻

[@jtadventuring]

How did you get the front bumper black in the end??

[@DanChambersDAC]

Thank you for the comment and for watching! I used Sunox satin black spray paint!

[@filipwennergren2712]

This wants me to have a T5. Keep up the good work. Is it Audi rims? What size of the heels? Looks really good!

[@DanChambersDAC]

Thank you for watching! Get one, They are so cool! The wheels are 18x7.5 VW Amarok Steels with 225/45 tyres.

[@mymatedavethedj]

Love it! Videos are awesome 👏

[@DanChambersDAC]

Thank you for watching and for the comment!

[@avocado71]

Which rear bumper did you use? How was the fit?

[@DanChambersDAC]

Thank you for watching and for the comment! It is a pattern part off ebay. the fit was OK.

[@anthonyhoran2543]

I’m a thinking of buying some of these paint cans for spraying my motorbike.....can they take lacquer afterwards

[@DanChambersDAC]

Thank you for watching! Im not too sure as everyone i know that has used this has left it matt.

[@Kayos-in7ju]

if the plastic on the bumber is in good condition, use a heat gun, it brings the oils back to the surface and makes it look new again

[@DanChambersDAC]

Thank you for watching! I did consider this but the bumpers were patchy so I didn't think that the heat gun would work.

[@panny1969]

Looks great mate superb job I keep watching your suspension mods and wondering if I have the tools and balls to have a go and do it myself 😁👍keep vids coming 👍

[@DanChambersDAC]

Thank you for watching! Go for it, Give it a go! Thank you for the comment.

[@panny1969]

Hi Dan what size is the collar on the strut please cheers

[@panny1969]

Also do you have a code number for JOM Coilovers need to order some 👍

[@panny1969]

Going for it 🤔🤣

[@joeblack4026]

why didnt you paint the bumpers as well, and why no clear coat on the paint , so much for for preping the car up i would put clear coat on it as well

[@DanChambersDAC]

Thank you for watching and for the comment! I like the black bumpers and the matt paint finish. Breaks it all up a bit.

[@adambunting1184]

I've lowered mine on just he springs, yours looks miles better, how does the shock kit you got ride like. Looking good

[@DanChambersDAC]

Thank you for watching! The shock kit is OK for a budget shock kit. As with anything, by the best you can afford. Go for the lowest kit you can afford as having the shocks set to a higher setting will give a better ride than a not so low kit set to the lowest.

[@mikefandango3343]

Great job Dan, lovin it. How much is it going for ?

[@DanChambersDAC]

Thank You for watching and for the comment! I am not too sure yet, a few bits still to do so once it is finished i will work out what it owes me.

[@K666_ANB]

What’s the tune at 2:06. This makes me want another van so bad, the versatility is brilliant I miss mine badly.

[@DanChambersDAC]

Thank you for watching! Gone & Found by Sum Wave. Such a cool van aren't they!

[@tonypotter5589]

Hi Dan did you need to laquer the van after the Paint?

[@DanChambersDAC]

Thank You for watching and for the comment! No, the paint is pretty tough and won't require a lacquer.

[@charliemotters4835]

Nice van mate. Is it LWB or SHB?

[@DanChambersDAC]

Thank You for watching! It is an SWB.

[@andypug42]

Love it very jealous, so understated perfect

[@DanChambersDAC]

Thank you so much for watching and for the comment!

[@Lucj88]

Hi Dan, you mentioned this van will be up for sale. Where will you be listing it? You’ve built my dream van, legit.

[@DanChambersDAC]

Thank you for watching! Yes the van will be up for sale once completed. It will probably be listed on my instagram first. I have had around 30 comments, e-mails and messages about when it will be for sale! Glad you like the look i have gone for!

[@motox2k]

might have missed it, did you lacquer it?

[@DanChambersDAC]

Thank you for watching! No lacquer on this one. I wanted a matt finish.

[@koolworths]

Awesome work sick vid

[@DanChambersDAC]

Appreciate it,Thank you so much for watching!

[@screwssawdust9992]

Mate amazing channel, loving the videos - don’t suppose you have a link or have the name and offset of those wheels and tyre size, I want the same look on my t5.1, would really appreciate it, thanks David

[@DanChambersDAC]

Thank You so much for watching and for the comment. The wheels are 18x7.5 Amarok steels. I got them from Tamar Wheels. Search Instagram for 'Tamar Wheels' Great guy with fast delivery.

[@screwssawdust9992]

Dan Chambers cheers matey appreciate it, it was only after I realised you spoke about which wheels you used in another video, thanks again bro, after this project is finished maybe a caddy? Just a quick one did I see this van on the transporter HQ video with the DRL headlights? Thanks again matey

[@JBSeymour]

@@screwssawdust9992 this was my question. Looks mint. I thought the amarok 18s only look good banded...but this looks pukka. You should be on top gear bro...rare instantly likeable quality as a presenter 👍👍👍

[@waynekeylock]

Hi mate fantastic job on your van, i have a ex post office van i want to re spay even though i have no experience and you have inspired me to go for it, thanks for showing you journey and links for products, did you put a clear coat on or is that not needed? cheers

[@DanChambersDAC]

Thank you for the comment and for watching! Go for it! What's the worst that can happen! No clear coat on this.

[@jamesbarnes4619]

cant belive all that effort and still left red paint when the side door and rear doors are opened unbelievable

[@DanChambersDAC]

🤣 I know totally ridiculous right! Luckily I knew that these pieces would be covered by trims when the interior is reassembled!

[@iandevlin6824]

Class job so far bud 👍 love the series. What paint did you use for the bumpers ??

[@DanChambersDAC]

Thank you for watching! I used Sunox Satin black paint. was recommended it by a few people that have used it for a while.

[@flyingbenny]

Great easy to watch videos Dan and the van looks nice bud.👍 I just binge watched the whole build and now its way past bed time!🤣 I've literally started prepping my T5 bumpers for some satin black this evening, what paint did you use? Bumper paint or standard rattle can black? Cheers.

[@DanChambersDAC]

Thank You for watching and for the comment!🤣 I have a tendency to do that! Sorry! I have just used Sunox satin black spray paint. It stuck to the bumpers of my last van pretty well.

[@collier666]

How much you after for it if you were to sell it? Genuinely interested. And where abouts in the country are you. I’m thinking about getting rid of my caddy to get a t5

[@DanChambersDAC]

Thank you for watching! It will be for sale once finished. Not too sure on a price, still a few bits to do then i can work out a price and get an advert up. I am in South Leicestershire.

[@x21ekx91]

Haters gonna hate mate the colour is 👌🏼looks mega ..selling? 🤔how much you looking for? 😉

[@DanChambersDAC]

Thank you for watching! That's it dude, I really like it! Yes will be for sale, Still a few bits to do then I can work out what it owes me and get an ad up on my instagram!

[@arfabarmcake2776]

You should of painted the head of the bolts for the wings etc

[@ian_morg]

Nice job! Where did you get the rear bumper please? I need one for mine as the paint is chipping off so want a commersh one.

[@DanChambersDAC]

Thank you for watching! I got the bumper from Ebay, Link is here:-www.ebay.co.uk/itm/VOLKSWAGEN-TRANSPORTER-2004-2012-T5-T5-1-REAR-BUMPER-BRAND-NEW-TEXTURED/222536571869?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

[@WatchDeppyGrow]

Did you put clear coat on it?

[@DanChambersDAC]

Thank you for watching! No clear coat on this one. This is the finish.

[@CameronM47]

I've always used satin black to paint black trim, looks better than mat black imo. The Grey looks good too.

[@DanChambersDAC]

Thank You for watching and for the comment! Satin black gives that year round shine!

[@jbburton5928]

Great job it’s the dogs

[@DanChambersDAC]

Thank you for watching!

[@MOSSFEEN]

if your HAPPY thats all that matters

[@DanChambersDAC]

Thank you for watching! Defo happy with it!

[@klerobi1]

Next project VW t4 Syncro! 😬🤘

[@DanChambersDAC]

Thank you for watching! Not too sure what the next project will be, need to see what is for sale when this one is sold!

[@markb1487]

Great comments, everyone really likes your work.. Put a few ads on,, make abit of money.. Great video again. 👌💸💵

[@DanChambersDAC]

Thank you for watching! Overwhelmed by all of the positive comments! We made it to the magic number to be able to put adverts on last Thursday and ad's went on the videos on Friday. Thank you for saying this about adverts too, Was worried that adverts would annoy people.

[@markb1487]

@@DanChambersDAC People appreciate the hard work and dedication Dan, and its good to see projects being complete.. Great videos.

[@webpigjohn4959]

You could have sorted the dent out in the bottom of the sliding door 🤔

[@DanChambersDAC]

Thank you for watching! Yup, missed that one. I may go back and sort that one.