When I had a old Grand Prix as a kid. It was a stock one. Not a GTP or GXP. But I told my buddies it was a GTP. When the came over Id rev it, then cut my wheels sharp. My power steering sounding exactly like a supercharger whine lol
@osvaldodiaz52313 жыл бұрын
Is a great car but always power stering make noises
@brybry68052 жыл бұрын
Said the same shit about my impala when my power steering had a leak I was messing with people with camaros took the beating like a champ tho
@UncleSi12 жыл бұрын
Gotta regal and I smoked a v6 mustang and he said he herd a supercharger 😅 it was my ps pump 😭😭
@1234mattq11 жыл бұрын
Damn your power steering pump is loud
@apr86usa11 жыл бұрын
Who you telling lol! Its been bad since I bought the car in March of 2011. :-/ but works well still.
@nicefknmodel22017 жыл бұрын
1234mattq haha nice
@mrincredible54924 жыл бұрын
Sounds like a cat
@Werlijus10 жыл бұрын
You should go with 3.4" and a Wizaired CAI. The intake will really bring out the supercharger sound. Got the 1.0 pcm from zzp as well as they're downpipe with high flow cat and u-bend delete, 104 autolites, voltage booster, 180 thermostat, and the three I mentioned before. Need higher performing tires now cause I can't get traction in first even going 30 mph. But it's fun doing 200+ ft burnouts now lol
@bryanlyon88463 жыл бұрын
I want my 2002 to run like that.
@LT1mike9 жыл бұрын
2005 Monte Carlo supercharged k&n intake and a custom cat back would I need a tune with these headers
@TanyaLove498 жыл бұрын
mike mollica hmm ok I have never thought about that. I am actually about to do a video now.
@fbodyws6ta8 жыл бұрын
i Still Love these 97-03 GP GTs & GTPs I Want To Get Me A GTP Coupe & Supe It Up
@bryanlyon88463 жыл бұрын
I have one I might be willing to part with
@g25r8cer10 жыл бұрын
No problems getting manifold bolts off?
@franciscoxbravojr.6248 жыл бұрын
i got the same exact car dont know whats wrong with it the flow master dont work and doesnt sound like before can you hel me
@mahopacgreg8 жыл бұрын
did you get any ticking from these? some people say sd headers tick?
@t-pitz88663 жыл бұрын
Man , was it easy to swap gauge cluster ?
@WBodyTech3 жыл бұрын
It's the factory cluster, just swapped the needles from the 2004+. Just make sure you line them up where the old one were.
@t-pitz88663 жыл бұрын
@@WBodyTech oh snap !! Thanks 🤣👍🏿👍🏿💯
@Pontiacs4life10 жыл бұрын
What's the easiest way to take off the rear header?
@USCisgay10 жыл бұрын
if you are talking about the manifold. Just spray the bolts nice and good with pb blaster and go for it. just dont break them
@josejaramillo61575 жыл бұрын
HELLO I AM FRANCISCO I WANT TO ASK YOU I HAVE A CAR GRAND PRIS DAYTONA 500 I THOUGHT TO FIX IT BUT I DECIDED BETTER TO SELL ME YOU COULD SAY ABOUT WHAT THE MOTOR COULD SELL IT IS WELL JUST LACK PAINT AND SOME MORE THING I AM YOUR SECOND OWNER AND I HAVE AS 18 YEARS OLD MY TRUCK GIVES IT AND YOU CAN RECOMMEND SOMETHING THANK YOU
@86gmcs157 жыл бұрын
What size band clamps did u use for the cross over pipe.
@apr86usa7 жыл бұрын
dylan rollins 2 1/4 for cross over (2) and 3" (2)
@86gmcs157 жыл бұрын
Alex Rippel haha thanks get get mine to fit the clamps
@JasonBohl9 жыл бұрын
Anyone know why Speed Daddy claims their headers are for Supercharged vehicles only? I'm installing my headers, just need to bolt everything back up, and am wondering now if it'll hurt something since they say for superchargers. Anyone have any info?
@rileycates50499 жыл бұрын
+Jason Bohl It shouldn't hurt the only side effect might be a loss in low end torque due to less flow which would reduce back pressure.
@JasonBohl9 жыл бұрын
thanks. However, wouldn't headers actually give them better flow as they're less restricted?
@rileycates50499 жыл бұрын
Yes that is the point I was referring to you will have more flow, you need a certain amount of back pressure to help to pull the exhaust gasses out of the combustion chamber. So you will make probably make more top end power but less low end torque.
@mrincredible54924 жыл бұрын
Sick
@kozsmosbeaudry29719 жыл бұрын
You need to readjust your lifters, one's ticking...
@timberwolfdeckingmore58697 жыл бұрын
Do NOT use the accordion like intake hose they are junk and are restrictive
@JasonBohl9 жыл бұрын
My 05 Impala N/A sounds way better. Way meatier and has more of a rumble. I'll post later. Still need to add my flowmaster 50 series though.
@Reeko9046 жыл бұрын
Jason Bohl your impala sounds like shit and slow asf