We Got This To Work On The Free Abandoned Airplane !

Today we will be fixing and rigging up the cables and pulleys that work the flaps and ailerons. Hopefully if we get everything right we’ll be able to move the control surfaces from inside the airplane for the first time in months! We are also getting some work done on the Piper Cherokee 160, going for a flight in our Cherokee 140, and doing some maintenance over at the Mr. Dent shop. Check it out!
Rebuild Rescue Videos:
FREE Abandoned Airplane... If I Can Start It! Ep1
• FREE Abandoned Airplan...
Taking Our FREE Abandoned Airplane Home! Ep2
• Taking Our FREE Abando...
He's Trying To STEAL Our FREE Abandoned Airplane ! Ep3
• He's Trying To STEAL O...
Will Our FREE Abandoned Airplane Finally Start? Ep4
• Will Our FREE Abandone...
Is The FREE Abandoned Airplane Finally Ours ?! Ep5
• Is The FREE Abandoned ...
Did We Ruin The FREE Abandoned Airplane Engine ? Ep6
• Did We Ruin The FREE A...
Our FREE Abandoned Airplane Gets Its First Wash In 17 Years ! Ep7
• Our FREE Abandoned Air...
Will Engine #2 Ever Run Again On Our FREE Abandoned Airplane !? Ep8
• Will Engine #2 Ever Ru...
Please support the 401 project with a donation to our gofundme. Anything you can offer is greatly appreciated!
gofund.me/a459b723
Grab yourself some Rebuild Rescue Merch!
rebuild-rescue.myshopify.com
CHECK OUT THIS LINK..... its free...
/ @rebuildrescue
Contact info
[e-mail]
[e-mail]
#FreePlane #AbandonedPlane #RebuildRescue

[@Stanty16]

I think by the time it's done, it might be worth an honorary designation of "401.2" in recognition of how much the 402 has contributed itself to the build

[@paulcalyxflores8554]

Good idea!

[@kerryedavis]

More like 401.8 or something. All that's left of the original 401 is the cabin/fuselage. Everything else is from the 402.

[@keira_churchill]

40½ 😄

[@alrad5686]

Its great to see weekly progress now. Each piece that goes back on is one step closer to seeing it fly again! Keep up the good work.

[@rebuildrescue]

Thank you for all your positivity !

[@BluntzBunny]

yacht video please i need more @@rebuildrescue

[@ShawnPossible]

Wooo whoo!! Almost have a fully functional wing. Every episode I watch makes me want to head out and help with the Phoenix even more. Great work guys. Great painting technique, Joe.

[@stevenholliday8873]

Newer pubs show pressing bearings in with non-curing primer on either the hole ID or bearing OD. This is for dissimilar metal protection. Although the way it was originally done there was no primer and no corrosion. Keep up the good work! I always preferred saving an old one verses working on new one. Also when rig is done neutral will be correct.

[@ericsantichen7861]

Whoever films/edits your videos really does an outstanding job!

[@stunttrumpet]

I second that. Brilliant job on both filming and editing

[@gawebm]

"Starting to not like airplanes"... I loved them until I built my own. When you build, and are responsible for your own maintenance, the "love" can start to fade. I completed my plane 6 years ago and I've reached the point that building and maintaining my plane has sucked the joy out of flying. I never expected this to happen. When you read or watch videos online everyone seems to paint this rosy picture of how great it is to build your own plane. That may the case for a few, but I think many just don't want to admit how the time and effort become just too much after a while.

[@coldsamon]

Serious question. Were you a person who always enjoyed building and fixing things before you began building a plane?

[@dickdegraaff5452]

Dear Jason, It’s so good to see how you and Joe are going forwards with the restoration of the Cessna 401. All the wings and rudders are like brand new installed and all the steering cables seem to run absolutely fine. It’s a mile stone forwards and I can’t wait till this beautiful technically is finished. Of course than there still is a lot to do before she really can fly but your to do list is getting smaller and smaller. I therefore wish you and your team (with special thanks to Joe) lots of success with the rest of the refit and send you love from the Netherlands

[@rebuildrescue]

Thank you for always having kept the faith in us Brother! Your support always keeps us going!👍🏻

[@Ellis157]

you got to love Sam he is great

[@ZapperguyLOL]

Congrats on getting the hardware installed! Loved Jason's cat-like reflexes while wrangling that renegade bolt. Always looking forward to the next one. ☮

[@rebuildrescue]

Thank you!! 😂😂 See you next week Brother!

[@MGower4465]

In the old Buck Rogers TV show, the wicked Princess Ardala confronts Buck with a cyborg copy of himself. It being the 80s, the two promptly try to fight, with Buck finding Buck2 is his equal. "Ypu're good, Buck," says Buck2, "but I have your skills and your mouse-like reflexes." Buck, "Mouse-like?" Buck2, "Correction, cat-like". Buck, to Ardala "Got a real winner here, Princess."

[@greggsvintageworkshop8974]

Like eating an elephant, one bite at a time! It is so enjoyable for all of us watching this old bird coming back together correctly! Jason you are commended for being so hands-on and having the intestinal fortitude to see this project through! You never disappoint, unlike another channel I used to watch that over-promised and under-delivered on a 310. Keep up the GREAT work, and Joe is an AWESOME asset to the project, as is Greg and all the rest!

[@rebuildrescue]

Couldn’t do it without them or you and the rest of the Crew Brother ❤️🙏👍🏼

[@62heliman]

I think I know who you are referencing "J world"

[@ahashdahnagila6884]

​@@62heliman Jimmy's a really good (enthusiastic) pilot, though. I love his channel...except for that "Elvis piece of junk".

[@robertlightfoot273]

Great job with replacing a lot of $280.00 Parts that makes it 100%. Then getting all cables and pulleys to 100% and right the first time! Not to mention working on parking lot, getting parts, painting and installing an elevator on the other air plane. You guys have been busting things out this week!💪

[@KandMe1]

I remember early on, the comments. People harping on about progress. They had no idea. Absolutely zero clue how impossible it is to do something like this unless it is a thorough renovation. Nobody has a notion of just how much work is involved at that stage but people were complaining. It is hilarious to think about those people and the blah blah they were spouting. Just to say congrats on what is emerging. And good to see Sam there also. It is inspiring what you guys have done to date. Very inspiring. And it is a credit to Sam and everybody else. Just a wonderful job makes me laugh thinking about the Disney Land theme. “When you wish …” you guys are awesome.

[@rebuildrescue]

We’re getting there slowly but surely and I’m happy you’re here with us ! 👍🏼

[@fredharvey2720]

This looks like more of a rebuild. The plane was so neglected.

[@toddhaynes3663]

Why are they greasing what appear to be sealed bearings on the pullys?

[@wadedych1523]

So good to see all the progress on the 401. Everything that gets done is one step closer to getting it in the air.

[@rebuildrescue]

We get more excited every day! We won't know what to do with ourselves when it's done!😂🤣

[@erikaostlund5229]

Say I would like to call attention to the aileron trim setup. I was flying one of our companies 401's one morning and noticed the aileron trim tab was vibrating... I could feel it in the yoke. The piano hinge on the trim tab had actually worn out. You will want to inspect it very closely, this trim tab had passed a zillion 100 hour inspections. I was the first to notice and squawk the aileron trim tab vibrating in flight. This was back in the 1980's.

[@i.r.wayright1457]

I use heavy grease to hold washers in place when in a tight situation like the aileron and linkage install.

[@patrickstewart6090]

From the Wright brothers till today, cables and pulleys, are the secret to steerable flight

[@jaylong8172]

I want the Austin. I feel so invested in it. I would truely cherish it for life. I would pass it on to my children. I would get a plate that says mini 401. I really really really want the Austin!!!

[@merseyviking]

I hope you're keeping all the broken and replaced parts, so at the end of the build we can see how much of the original 401 is actually flying!

[@OldDeadMan]

Something that amazes me watching all this is the complete lack of grommets. I'd have thought that rubber grommets would be used all over to stop cables from rubbing metal on metal.

[@danielheckman5]

I wonder if we could, in one of the episodes, get an overview of past and future 401 progress? Engines, props, control panel, etc..

[@Neeko-fz1uk]

Are you also learning to fly a plane?

[@projectpacer]

My flight instructor always taught me a quick and easy way to check controls everytime. I see people always check free controls but I don't hear them say correct before every flight. Easy way is to grab yoke or joystick with one hand, doesn't matter which hand....stick your thumb up while grabbing. Turn the yoke to one side....your thumb will point to the aileron that is supposed to be up....and other side should be down.

[@LordCeeJay]

A little dab of contact cement holds washers and spacers in place really well. They come off later quite easily also.

[@rebuildrescue]

I’ll have to give it a try next time 👍🏼

[@Sal-oi1db]

Masking tape works well too!

[@rocroc]

Nice job. Excellent work. Joe's a treasure.

[@jimouthern]

Man, that's like building an airplane in a bottle. Love the bloopers. Fingers crossed.

[@topturretgunner]

WOW 😯! Getting these control cables rigged adjusted and the control’s adjusted must be a time consuming job. Well done guys. I am looking forward to seeing the 401’s first flight. She will be beautiful. I’ve been following the progress on this airplane from the start. With your labor of love on this ship I’m sure that she has a long and productive life ahead of her. Witness the rebirth of the Phoenix! 👏👏👏🫶🏻

[@riteshsharma5285]

Mr. Jason, setting up the parking lot yourself then back to hanger working on 401, and there too managing with $285 extra expense and then too smiling. There's a lot to learn from you Sir ❤ Respect 🙏

[@Neeko-fz1uk]

Wow It seems like you are an experienced pilot. Can I ask you some questions?

[@iamalwayswrite]

That scrubbing is crazy. Please get a donation of a laser rust removal tool. You also need a dry ice cleaner.

[@emaneasler]

They did have a dry ice blaster idk what happened to it. It might have been a rental.

[@ElectronicMechanic50]

I'm only 20 minutes from your hanger I'd love to come see the plane and assist in some way! Been binge watching for a few days now!

[@wessims5534]

I'm with @phil10000, need a full tank of gas in my new Austin lol. As always you guys rock Jason, Joe, Sam and all the support that you have over there. Sat. mornings are started by watching Rebuild Rescue.

[@rebuildrescue]

Hey Wes! All of us over here at the hangar appreciate your positivity and support👍🏻 Glad to have you apart of the Rescue Crew!

[@extremesheepdawg6379]

At the rate things are going, a tank of gas will cost more $$ than the A-H.

[@Neeko-fz1uk]

This is just awesome, how long have you been following it?

[@wessims5534]

@@Neeko-fz1uk About the time that they got the 401, so over a year for me.

[@Neeko-fz1uk]

@@wessims5534 This is awesome, I'm new here but I love this.

[@UNIVERSO-de-BARCOS]

I Can't Believe How They Destroyer This Beatifull Planes ✈️🛫 It Was Nice When It Was Original Green And White ↗️ And Dark Yellow Interior With Those Seats

[@bglenn2222]

Saturday mornings don't start until i watch rebuild rescue! Your team is awesome and watching the 401 come back to life has been inspiring! Can't wait to see what you all accomplish with Phoenix once she's back in the air!

[@rebuildrescue]

We are so happy to be apart of your weekends! We appreciate all your positivity and we would not be able to do this without the love and support!

[@ellonysman]

ITs amazing. I watch Rebuild Rescue and Zeroblog just to shut down and zone out of daily hassles of life. Its like a shot of adavan or valium lol

[@kristenkylemack9477]

@@ellonysman that's funny!!

[@apexcarver97]

I've been wrenching on cars for 20 years and totally unaware of the existence of washer wrenches! I race a formula car with tons of rod ends, looks like they would save me a ton of fiddling. Thanks!

[@combatrex7980]

Great job! I can’t wait to see it completed!

[@rebuildrescue]

Its been super exciting watching the 401 come together!! Thank you for being apart of it!

[@combatrex7980]

@@rebuildrescue thank you it’s been a journey for sure

[@michaelized]

Will the rusted holes that the cables are fed through erode the cables as they rub against them?

[@user-vv2uy4ne2r]

What I love and hate about aviation is that every little thing can be critical. I fly radio-controlled models, but even there a small mistake can cause an accident. Good luck and patience!

[@delmanicke9228]

I spent 30 year in parts business, the bearing manufacturers always said never free spin a bearing it ruins the bearing by taking the temper of the out side of the bearing some how with metal on metal contact. But it's so fun to do. Just sharing some of my knowledge. Love your show. 👍

[@bernardc2553]

IMO, What your referring to is the use of Air..

[@poorman68]

I like the creeper that allows it to sit up some. Nice

[@kaboom-zf2bl]

use a dab of grease on the sides of the bearing to hold the washers while you push the bolt through .... the dab of grease wont hurt and it makes life easier .. i was expecting Joe to do the trailer light test gag ... checking the blinkers ... on off on off .. in this aspect up down up own .. lol as for the hard on the knees open floor .. make a 2x2 board covered with a few inches of foam padding covered in some old cloth ... then you can drop that into the cockpit for when you knee d to cross in there to check things ... comes in handy elsewhere as well ... and DONT think dirty minded };)

[@christopherseivard8925]

Sitting’ here watching something get fixed,is therapeutic.

[@rebuildrescue]

So glad you enjoy the videos!

[@MManeval]

One step closer guys!!!!! Fantastic!!!!

[@rebuildrescue]

Thank you for watching and supporting!

[@markotrifunovski5832]

Wow watching you lubing the pulleys with the grease 33 with bare hands amazes me😂😂. Keep up the good quality videos, amazing project👍👍

[@alfonsoandrade591]

I can’t wait for the 401 to fly on the air for the first time how exciting ✈️ I hope someday this rebuild rescue channel riches up to 1 million . ❤

[@robertwolfe8680]

It’s getting closer to completion. It will be a real treat to see it flying again. You and Joe work well together and things get done a good working relationship is necessary on a project of this magnitude. As always stay safe and enjoy the weekend.

[@scottieswave300]

Another important step in the Phoenix! Congrats Jason, Joe and Team! 1 step at a time.👍

[@rebuildrescue]

Thank you for watching and supporting!

[@seanstaplin6513]

If someone told you when you first got the "if you can start it free airplane", that this was all going to happen and you would be doing this, I bet you would have said they were crazy. Thanks for taking us on this ride. :)

[@rebuildrescue]

I saw that at least once a day ! Thank you for being here. 👍🏼

[@alphamegaman8847]

At 17:45, at $285 for a 25 to 50 gram part, it must have been made out of the overpriced "Because-we-canium"! 🤔😕🤬 Thats Outrageous!🤯 Reminds me of when I was working at a Medical device manufacturer in the mid 1980's making PMMA plastic Intraocular lenses. The cheapest ones they sold cost the patient, north of $700 each for a part that cost about $8 to make!😱 The Guv'ment eventually made them drop their prices!👍 I'm sure the Owners and Share holders weren't happy about that, but damn, they were "Molding Money" there for many years!😁 Mike in San Diego.🌞🎸🚀🖖 Still kicking myself in the ass for not finishing my Private Pilot training in 1978 when I was 17, when the 1 year old Cessna 172 Skyhawk with Instructor and fuel cost me $27/Hr! Was just ready to solo when I had to move from Oregon to Arizona for College. One of the Worst decisions I ever had made FOR me, by my family!🤬😕

[@darrenbell3534]

So easy to underestimate the complexity of aircraft. Doing a great job. I keep tuning in waiting to see everything waggling in the right places and the whole plane screaming down the runway.

[@RealRickCox]

One step closer to basically having a brand new airplane! Looks great!

[@Neeko-fz1uk]

Great, I also have a plan to buy a new plane, what plane will you fly first?

[@tracynichols7206]

On reg. Washers add a magnet too tool, and thin clear plastic to top and bottom of tool with slots will hold washer and let you pull tool out

[@xyzabc4574]

Control surfaces are best surfaces. Congrats on getting a few more slightly more functional. Can't wait to see this thing high speed taxi. Without catching on fire.

[@MicahMesser]

As someone who just reinstalled all my flight controls...I fully understand all the frustration and pain in this video! (all under APIA supervision)

[@doylecase2922]

She's really coming along in great strides! And I'm happy and proud to see how much attention it being given to every detail... and I want the Austin!

[@rebuildrescue]

We want everything done right, it is taking a little longer but it is 100% worth it!

[@jmr324]

Can't wait to see it finished with paint.

[@gamevillage9584]

Joe is so much fun and sam too😂😂😂, "Am through with you".

[@rebuildrescue]

😂👍🏻

[@cecilmiller6557]

Thank you for keeping Veterans First on your build

[@rossnolan2883]

Good job 😊😊😊

[@rebuildrescue]

Thank you Ross👍🏻

[@craigebrogden1199]

Hey guys, so good to see Sam again. Glad he’s recovering oh And by the way I want the Austin. Cheers guys

[@trespire]

As an ex Phantom phixer, some jobs require an "attitude" to get done. Nice job so far, liking what I'm seeing. Ex IAF structural technician / mechanical fitter, (Shlav) Grade-12

[@gramps9838]

Sitting down to watch rebuild rescue is almost as good as being there in person in the hangar. I look in anticipation for Saturday just to see what's new for the 401 ! Every time I pass a local aircraft manufacturer I think of you guys. Kudos !

[@rebuildrescue]

Awesome! We are so glad to have you apart of the Rescue Family, and thank you for making us apart of your Saturdays!👍🏻

[@idiamin6311]

Besten Dank....and big respekt...for this work---------tschüss bis morgen Danke nochmal

[@jsniderhan]

We never had one of those washer tools. We would put a dab of grease on the washer, and a screwdriver so it sticks to it, and push it up in there.. that tool is handy.

[@Kentucky921]

Glad to see progress on the 401, it will be a glorious day when the 401 gets light and the grass falls slowly away beneath it

[@rebuildrescue]

We can't wait! We also won't know what to do with ourselves when she's done!😂

[@Kentucky921]

@@rebuildrescue yes it will Leave a gaping hole in your schedule 😂😂

[@dougpartington1843]

Jason, another great video. Your channel has become my Saturday morning first thing to do of the day. It was nice to see Sam again. You are definitely in the harder more technical part of the rebuild. Making good progress. Do you have your PPL now? Nice butter landing. Looking forward to next Saturday already.😊😊

[@rebuildrescue]

That means a lot to us Doug, thank you for making the time for us every week, we wouldn't be here without all the support!

[@markkaschafsky3045]

So quick tip about rental equipment. First, if you have to rent, rent from Equipment Share and support a smaller business. Second, as far as skid steers go, get a Takeuchi, they run and move much smoother than a bobcat.

[@ahashdahnagila6884]

Replace "good" bearings with brand-new ones? I'm glad you guys have an unlimited budget. 😮

[@user-tl8le5mg4l]

Yay! More progress on the 401!

[@aaronmorehouse6569]

We miss Sam! Want to see more of Sam! Also did joe get his new smile yet?!

[@Neeko-fz1uk]

Lol That's interesting, how long have you been following them?

[@aaronmorehouse6569]

@@Neeko-fz1uk 2 years or so. I started following rebuild rescue since he got the RV.

[@Neeko-fz1uk]

@@aaronmorehouse6569 This is awesome, I'm new here but I love this.

[@garybondurant8097]

Sam's the MAN....🛩

[@Brtmyster]

I really like this project. Been watching since the beginning. Disregard the non-believers and haters. You do you, my friend. Be the best you can be.

[@rebuildrescue]

Thank you !

[@samuelstringham7129]

Working on cars and planes is hard work but it's worth it and people love it when it reach to the finish line. I hope we will see the 401 in the sky again, I want that Austin

[@Dbsabzbzb]

There are some tasks that seem, and actually are impossible, but through the power of will and human intention, magically, somehow, they get done, and those parts go together!

[@rebuildrescue]

Our journey has lots of ups and downs, but you guys always show encouragement and support! It makes it so much easier!

[@markpatterson7070]

great job!!!!!!!!!!!

[@rebuildrescue]

Thank you Mark!

[@laurenttuske2432]

Just to tell you I love you guys ! The Plane is a great project……… You’ve made me dream !!! Thank you forever for that

[@rebuildrescue]

Wow, thank you so much for being apart of the rebuild! We wouldn't have been able to get this far without supporters like you!

[@derekrolfe7052]

Can’t wait to see it painted and interior installed

[@imonaroll9502]

This channel really is saving so many people in getting a fixer upper. 😂😂😂

[@rebuildrescue]

😂😂

[@markhammerschmidt5315]

Fantastic progress everyone. Slowly but surely. Good job.

[@rebuildrescue]

Thanks Mark!

[@larryburwell8550]

well great job, ive actually never seen a plane disassembled or reassembled so i never knew it was this complicated to do on the control surfaces but you and joe did a fine job. episode by episode makes me want to see this plane flying as you do. thanks for sharing. Larry

[@rebuildrescue]

Hey Larry! Thank you for stopping by to support the channel, your positivity is super motivating👍

[@kristenkylemack9477]

Wow! I can't believe how Much one litte tiny part cost almost $300. Crazy! I am glad you are not taking any short cuts! It's good to see Sam again. It looks like you got the new tube in the tire & they got off OK! It good to get all those bearings greased & the 402 has been a good parts plane. Have a great week see you next week. I want the Austin. Please! ❤

[@rebuildrescue]

100% doing everything the right way. Thank you for your dedication to the channel, we wouldn't be here without your support👍🏻❤️

[@stevenf-b9318]

I've been watching the build since early but first comment. Loving to see the 401 steadily come back from the grave. One thing I'd love is a checklist on what's left (obviously a lot still in it) so we can track how close it is to getting the old bird back in the air. Keep up the great work Jason and team!

[@rebuildrescue]

Hey Steven! Thank you for believing in us and making time for us each week! That is a great idea!

[@wesheriveaux9325]

Good to see you flying

[@sikorskywade6328]

I think you should have used nylon or rubber grommets in those holes to prevent damage to the cable and the hole area.

[@taurota1554]

Awesome as always.Thanks for sharing and taking us along

[@rebuildrescue]

Thank you for being apart of the Rescue Crew !

[@leaningcedarcamp3719]

Like the soundtrack 😊

[@ck47401]

To keep your cool while installing those parts is next to awsome. I couldn't do it without launching a wrench across the room. Well done.

[@rebuildrescue]

Lol, thank you! Ive definitely been there once or twice 🤣😂

[@michaelzaug8750]

The anticipation is GROWING.

[@gravyarts]

You know it's great when you got a flight scheduled and a 401 video uploaded.

[@rebuildrescue]

Sounds like an awesome weekend! Enjoy the video and stay safe!!

[@photolabguy]

Is the yacht still at Mr. Dent? I didn't see it when you were working on the rocks. Any updates on the yacht?

[@bbjj7904]

YOU GUYS ARE DOING A GREAT JOB KEEP ON ROCKING GONNA BE A GREAT TRIBUTE TO THE PEOPLE YOU HELP WITH THIS PROJECT

[@pilotmiami1]

Bravo.go ahead

[@extremesheepdawg6379]

It is absolutely amazing how LITTLE holds critical parts together on an airplane. (Edit) Almost forgot: “I want the Austin “ !

[@nathanwildthorn6919]

I worked as an AeroMech for 30 years. I love this channel, Jason! Thank you for the content. ❤

[@johnfitzpatrick2469]

That's quality: the pulley system and new greased bearings. That, the wings and engine; plus (prop). 👉🤪👈

[@thomaswall4285]

Hi guys, I love your videos. It is one thing to fly a plane but I am gaining so much seeing these airplanes being taken apart and worked on with great attention to detail. Great job always. Wishing you all the best,T

[@rebuildrescue]

We are so glad to hear that Thomas! Thank you for watching and supporting us👍🏻

[@Cryton12345]

Nother banger man

[@stevendasilva9256]

Welcome to Aircraft Maintenance, this is why when you make an entry in the log book, write, Maintenance Manual Chap. 51 was referenced. If you write Maintenance done I.A.W. you're stating that the maintenance was done In Accordance With a vague manual procedure. It's mostly for the lawyers when a screw up happens so fingers can be pointed.

[@Kevin-zc8pn]

Great news! You are on a roll!

[@johnaikema1055]

and to think you get to reinstall them again after paint...all the fun!

[@rebuildrescue]

Ugh !!!! 😫😂

[@jimjenkins3313]

Heck of a job with the ailerons, tweak, tweak, then success, great job guys. It's been fun and I've been here since day one. Shoot, my knees hurt watching you crawl across the floor to test those ailerons but come Amigo, I'm still surprised you don't have a nice pair of knee pads but it seems in past videos you did and so did Joe, not sure. During today's taping, bad parts out and new in, of course. But it got me thinking about how much scrap material, steel, aluminum, all good as it goes towards tis wonderful project and perhaps for aviation fuel in the future. Carry on Amigos and keep it straight, by that, I love that you guys won't take shotcuts. Ondale!

[@rebuildrescue]

Hey Jim, thank you for watching and supporting, my favorite part of the channel is talking to you guys ! We do have knee pads, we're usually just too lazy to grab them!😂🤣👍🏻

[@dponath]

Saturday 401 Awesomeness!

[@rebuildrescue]

Absolutely! We hope you enjoy Brother👍🏻