Whisper Wash Classic Surface Cleaner Repair- Change Cartridge and 4 Nozzle Bar

[@TheFreshRinse]

I’m super grateful for this. I appreciate you!

[@ExpertPowerWash]

Thank you! Love your channel. I really like your comedy. Keep up the great channel.

[@mikeschmitt5273]

Great info for when the time comes on my WW Classic 19"

[@ExpertPowerWash]

Thank you. Appreciate the comments. I left you a link for your other comments about the tank.

[@bestandsafe1948]

Actually just needed this. Thanks

[@ExpertPowerWash]

Glad it helped. Thanks for watching and commenting.

[@allproexteriorservicesllc5338]

Good detailed video! Hope all is well.

[@ExpertPowerWash]

Thank you! Appreciate the comments.

[@tpcleaning640]

Try 15025s. More flow and the tighter angle hits just as hard.

[@ExpertPowerWash]

Appreciate the comments!

[@tpcleaning640]

Hey bud. Where do you put the seam of the brush when assembling.

[@ExpertPowerWash]

We like to put it in one of the clips. Holds together.

[@mikecarlson6083]

You ever use hot water with whisper surface cleaner

[@ExpertPowerWash]

Have a friend that does and he says it works great.

[@blakenasser7166]

What’s the difference between the yellow and blue one? Just that one is plastic and one is aluminum? The heads are the same?

[@ExpertPowerWash]

Yes. Everything else is the same

[@Unsilentmajority-1]

How do you know it’s the cartridge and not the swivel?

[@ExpertPowerWash]

I know stuff🙂

[@truthhammer9567]

Great work, wear black rubber gloves next time, makes it much easier.

[@ExpertPowerWash]

Thank you. Good call

[@matthewmiller8049]

Awesome video. It'll be very helpful. Have you even ran the 2 tip bar on surface cleaner?

[@ExpertPowerWash]

I’ve ran a 2 nozzle a while back and decided to give a the 4 nozzle a try. The two nozzle worked fine. I believe you want a wider fan on those. I found from my experience that the four nozzle works a little better at leaving no lines. The only downfall is that the smaller nozzles on a four bar clog easier.

[@matthewmiller8049]

@@ExpertPowerWash What size did you run with just the 2 nozzles? That's what I'm trying to avoid...just in case. Thanks for replying dude!!👍👍

[@ExpertPowerWash]

For a two nozzle at 8 GPM, you will need 25 degree 4.5 orfice

[@Zero2soft]

Great vid, so you use 2502 's for the 19 inch running on a 8gpm? Just curious I'm about to get rid of the BE surface cleaner and get a whisper wash with 4 nozzle bar and wanna make sure I'm not eating up concrete. Thanks

[@ExpertPowerWash]

That’s what I’m running and it works well.

[@elmeromero6207]

Its not tight enough bro

[@ExpertPowerWash]

Bummer I thought it was.