WHITELINE SWAY BAR INSTALL

[@TURBOTRISTO]

Thanks again to my subscribers for reaching out to me and sponsoring the build you have no idea how much it means to me to have your support!

[@robertnewland90]

Good to see an Aussie giving the Honda vids a go. Cheers From Darwin NT

[@TURBOTRISTO]

Angry Ranga Prospecting thanks mate!! I appreciate the support, thanks for subscribing

[@rorymcartney]

Couldn’t agree more with support your local!! Great videos man!

[@TURBOTRISTO]

rory mcartney I try

[@uselink5-75]

I got a rear sway bar from a integra for my 96 civic, when I went to install it I realized that the person who had it before me redone the exhaust and removed the up and over the control arm pipe and ran it straight blocking where the sway bar needs to be at. Also the control arm is bumping the exhaust pipe.

[@TURBOTRISTO]

thats exactly what happened to me so i had to modify it not the end of the world sway bars are the best

[@dabcity9319]

Thanks for this I just got my whiteline brace and sway bar look forward to installing

[@TURBOTRISTO]

Well done man you won’t know yourself after haha it’s night and day

[@TURBOTRISTO]

I did a second video a couple of weeks ago this time on a hatch with driving footage

[@aidanlamont4037]

Did you ever end up getting around to putting together a full kit with everything you need to run a turbo kit on the d16y4 ?

[@TURBOTRISTO]

I’ve done a heap of videos about what is required

[@nathando413]

I'm going to be installing on my ek tomorrow! Looks pretty simple

[@TURBOTRISTO]

Best mod you can do brother

[@nathando413]

@@TURBOTRISTO hell yeah. I tried setting it up but it seems the end link that connects to my lca doesn't have the bolts required? I'm probably doing something wrong LOL

[@TURBOTRISTO]

@@nathando413 if you have a civic base model hatch you need sedan or em1 lcas

[@nathando413]

@@TURBOTRISTO now that makes sense LOL. Would I need to hand tight certain bolts for the rear sway bar while it's up in the air then tighten them properly when it's months ground?

[@darnelvennik6004]

Earned a new sub ! Love your videos keep up the good work mate!

[@TURBOTRISTO]

Thank you sorry it took a week to see the comment for some reason it doesn’t show me ones on older vids

[@harrydundee641]

so i wanna install a front sway bar on my EK civic cli thing, I got the whiteline bar but I am stuffed to know what else i need cause I know they different.

[@TURBOTRISTO]

You need sedan or em1 or ek4 front lcas and the sway bar mounts and links

[@Imabitbored1]

Do you need to follow any torque nm when tightening the any bolts?

[@TURBOTRISTO]

Not really, just tight

[@MichaelMoto]

thank you for the inspiration. So many bolts over an over, it's my new code up down loose tight like Konami code

[@TURBOTRISTO]

Glad to help, haha

[@infrarednovaa2105]

So did these cars not come with factory rear sway bars? Cause I noticed mine didn’t have one and I thought I was crazy😂 so I bought one

[@TURBOTRISTO]

No they never did unless it’s a ek4 ek1 gli and sir or type r ones

[@TURBOTRISTO]

Most didn’t have front sway bars either

[@blairo15]

Looking good mate!

[@TURBOTRISTO]

blairo15 thanks Mate I will be going to the next track day but only as a spectator the car won’t be running by then I dont think.

[@wrk_in.progress7524]

Jsut wondering can you put rear sway bars in Ek Civic Cxi models?

[@TURBOTRISTO]

Yes you can that is what this kit is made for

[@Yamum691]

Will you be tinting it?

[@TURBOTRISTO]

Aidan Hunt not sure yet

[@djvisuals4887]

was it hard to take out the gear linkages??

[@TURBOTRISTO]

No mate just two 12mm bolts

[@djvisuals4887]

@@TURBOTRISTO Thank you will be installing my sway bars soon! and same with the exhaust just a couple of bolts too?

[@TURBOTRISTO]

@@djvisuals4887 yes just two bolts per section of exhaust you are changing I have another video installing a rear muffler check it out

[@lifted4evr]

What kind of front lower control arms are you running? Trying to figure out what sway bars with work with the k-tuned front LCAs for an Ek. I see that the whiteline control arms mounting points sit vertical not horizontal

[@TURBOTRISTO]

G’day Ray, my car currently has all of the standard factory LCA’s I agree the sway bar links are a little out of align meant I’m unsure what the solution is

[@lifted4evr]

@@TURBOTRISTO interesting! Appreciate the response Tristan! The EX/HX 96-00 civics here in the states have a different swaybar mounting design on the front LCAs. Your’s looks more like the 99-00 SI stock control arms. Which is sweet. Good stuff tho, you have the only video up, that I could find, of installing the whiteline front sway bar so thanks for forging the path!

[@TURBOTRISTO]

@@lifted4evr yeah there are slight differences in each country mine is a 98 model

[@phileas2756]

Hey, I just installed the same bars on my ek, but I have trouble with the front links. It's like the right one broke, u use special ones? I bought Tegiwa links for the front sway bar. If you can help ^^'

[@TURBOTRISTO]

Hmm should all fit up unless your lower control arms are from a car that didn’t have a front sway bar?

[@phileas2756]

@@TURBOTRISTO thx for your answer, I had a sway bar, I drive an EK4. The problem was the driveshaft :'(

[@rafaelortiz8971]

Your jack stands can go a lot more higher then that mate, I saw u had it on its lowest point ..... ek looking good, I need those sway bars for my em1

[@TURBOTRISTO]

Yep that is true , these sway bars are amazing there will be attack video coming soon showing them off

[@daniel_kabay]

I have these sway bars on the way. Do the OEM rear LCA have the holes for the links? Or do I need new arms to fit the rear

[@TURBOTRISTO]

The rears are ready to go but if you have a hatch you need sedan or ek4 lcas

[@daniel_kabay]

@@TURBOTRISTO thank you for responding. Damn I have ek1 hatch. Looks like I'll have to get some lcas.

[@TURBOTRISTO]

the rears are fine its only the front lca that needs to be changed

[@daniel_kabay]

@TURBOTRISTAN thanks mate. I ended up getting a whole heap of hardrace stuff anyway so replacing both arms :)

[@Diamondhillchi]

Having trouble fitting the links on mine 😂😓

[@TURBOTRISTO]

Front or rear? Or do you mean the bushes? Into the links

[@Diamondhillchi]

Yeah I had the swap the bushes. Ended up using the long bolts and big washers to squeeze the bushings into the links

[@Diamondhillchi]

How much did it cost you to get the muffler fabricated?

[@TURBOTRISTO]

@@Diamondhillchi like $100 to change it

[@TURBOTRISTO]

@@Diamondhillchi glad you got It sorted mate

[@aicelabellera3831]

Nice!! Leave the it like that just put a screen!💪💪🤣

[@TURBOTRISTO]

aicel abellera a screen on the turbo?

[@Yamum691]

AWESOME WORK

[@TURBOTRISTO]

Thank you so much 😀

[@BoostedPastime]

Thank you

[@TURBOTRISTO]

Not a worry mate please consider subscribing

[@nitrogearaustralia3949]

whiteline is the best

[@TURBOTRISTO]

i agree

[@nathanlevander1867]

Yeeeeeee gonna be doing this next !

[@TURBOTRISTO]

Awesome makes a huge difference

[@Yamum691]

Nice!

[@TURBOTRISTO]

Aidan Hunt cheers

[@justintyme882]

Shame about the exhaust. Can’t wait to hear how it handles around the track next time you’re out.

[@TURBOTRISTO]

Justin Tyme I will fix the exhaust shouldn’t be an issue , I can’t wait to get in on the track with grip and boost

[@nathanlevander1867]

UnDer GloW Neons bro why haven’t you ?

[@TURBOTRISTO]

Maybe one day on some car

[@Yamum691]

Sick

[@TURBOTRISTO]

sick balls bruz

[@dezyfei9927]

Hey Mate! I'm in Melbourne! Is there any chance that you can help me install a few parts? Is yes! please tell me how to contact you!

[@dezyfei9927]

ek owner, btw! Big fan of yours! And really appreciate, your channel is really helpful!!!!!!!!!!!!!!

[@TURBOTRISTO]

Message me on Facebook tristan ostara

[@Slot1Gamer]

need about 15 extra ugga duggas

[@TURBOTRISTO]

hahaha i was teaching SJ about ugga duggas tgoday she had a go at a few herself

[@Yamum691]

Siicck

[@TURBOTRISTO]

Aidan Hunt siiiick bruz