WILL IT START? The Freightliner Cabover has New Tires, Fuel, and Dual Stacks!

[@brayt0n]

also a tip when heat wrapping something with that stuff, soak it in water first. you will get a much nicer finish, and a much tighter wrap

[@jasontruman1215]

ONLMTR you don’t have to with the titanium wrap. The black or grey fiberglass wrap yes it makes it much nicer!!!!

[@DaveJohnsonad5nm]

@@jasontruman1215 I didn't know that about the titanium wrap. I'm rewrapping the exhaust headers on my helicopter this summer and in the past I used the black wrap but hearing this about the titanium wrap I might go that route this time.

[@jasontruman1215]

Dave Johnson the titanium wrap is much easier to work with and lasts longer too. Only downside is it is more expensive. It is the only thing I use anymore.

[@donnebes9421]

ONLMTR maybe he doesn’t want it wrapped any tighter than he is.

[@DaveJohnsonad5nm]

@@donnebes9421 ft

[@AslanBehar]

One of the best thing a person can do in his life. American trucks, restoration, driving them and watching them for hours.... My childhood dream... You are very lucky

[@roy1531]

Man those front tires and wheels really tie that front end together! Good call!!!!

[@lylegreenman6107]

Bumper ok with wide tires

[@JamesPretty]

Needs floats on the front

[@robertferguson3283]

GOD THAT LOOKS GREAT, IM AN OLD FART WHO PUT OVER 50 YEARS ON THE ROAD, AND YOUR PUTTING LIFE BACK INTO MY LIFE. I OWNED 10 OF MY OWN, NEVER A CAB OVER, BUT PUT MANY MILES ON IN CAB OVERS. THANKS FOR MAKING MY DAY.

[@mikemullay5622]

Bruce, I gotta say I am proud of you! You finished a project, and it sure looks like you did it right. Blue Collar is a nice lookin' truck that can now help you earn a living. Well done son!!

[@johnshaft5613]

As a kid growing up in the 1970s, for some reason I was a huge fan of semis and was obsessed with them. At that time in my area, 3 out of 5 semis on the road were Freightliner Cabovers. Seeing this one is hugely nostalgic for me.

[@scootdawg3535]

looks good dude but take some time and finish polishing "all" of the headache rack. those little details make a huge difference!!

[@hardwoodharry6364]

I can see the pride in you listening to your truck well done Bruce.

[@dougeubank]

I have always had a love for cab overs, my friend you have renewed that love, that is one sick truck, my hats off to you and your team.

[@bigdawgsbusa2]

Kool ole school I love to see people bringing the old cabovers back great work guys love the old combined too setting back in the corner

[@jordtizzle]

Supposed to soak the heat wrap in water first, so when it dries it tightens itself sound the pipe.

[@rubenbraekman4515]

That's how you're supposed to do it... and also not hold the roll upside down 😜

[@seanbrooking485]

it will be fine. still shrinks dry.

[@smurfvolvo]

Nope that's not needed.

[@colinallan2976]

Not that black lava wrap, it's good to go the way it is. The old cardboard shit, yes you had to soak it it kinda dried in shape.

[@deniseinsocaldeniseinsocal9510]

My late father drove both an International and Freightliner with North American Van Lines before buying a Kenworth K100. Good job Bruce.

[@jimmiecoffelt1956]

Sweet digging the Freightliner I hope you are going to finish the International

[@rocketqueen7355]

Well, don't never give up hope, there's something out there All you have to do it's just hold on and believe... 😁

[@robewalk2]

Nice job renovating the Freightliner Bruce. You need to figure out a logo and find someone who can make you some stencils to put on the doors, that'll look great. Keeping the wings is the right choice for sure. I hope you and yours are healthy and safe and I look forward to your next episode. Cheers from Tennessee. 👍😷🍻

[@doclull1989]

Hey Bruce!! Blue Collar looks great! Can't wait to see it on the road!

[@eirickchronister9528]

Well the trucks done now he just need to learn to drive it properly

[@merrymanrc]

Bruce each time you show blue it get better looking each video. Good job.👍your crew doing a good job.👍

[@MrTruckie500]

Looks damn good Bruce and crew, great job getting it ready so fast!!!

[@keitht7546]

Old Blue Collar looks good with a bath, a little paint and new shoes. All he needs an American Flag 🇺🇸 decals flying on both sides. Can’t wait to see it pulling Flat Nasty around. Great video ✌🏽

[@holmarschubert1557]

Do the headlights still have chrome frames? the blacks don't look good on the front of the truck. Your Freightliner looks great! 👍

[@Shakira_6.0]

Im sure i wasnt the only one who suggested blue collar but i am thrilled you picked that name. Fits it so well

[@MobWithGuns]

id say some LED conversion headlights just for performance/looks, i did them on my 72 C10 and night and day difference for clean and clear light output

[@bowslap]

Illegal on a CMV... .

[@albertodlr7804]

Nice work man! I really like the front rims, it’s not something I would do but I sure enjoy seen them in trucks.

[@aidanridings8452]

When you go back to the Chrome shop you should change the headlight covers to chrome with visors, chrome mesh grill, chrome bowtie drop visor, csm retro steering wheel, full quarter hogebuilt fenders, chrome deck plate, bostrom low pro seats, gauge package, whole bunch of switches with the blue jewels in them, watermelon bullet roof lights, watermelon lollipop turn signals on the bumper or mirrors and remove that mirror on the cab. All in all it looks phenomenal

[@jruss9109]

Yeah no

[@aidanridings8452]

@@jruss9109 what do you mean

[@billhickman4826]

I agree

[@matthovencamp7824]

Really been enjoying watching this build while stuck at home. She's looking good.

[@tmytco7664]

That white truck in the corner is the template of this channel: Buy a used tractor Add chrome, paint and tires. Tear down critical parts in haste Abandon project and repeat

[@evanhamilton8247]

Because that's exactly what he did with this truck right??

[@vegasfordguy]

Yep. He needs to take his time and do things right. There was nothing wrong with the engine in the International! Those bearings had a lot of miles left on them! Shitty paint job, didn't fix any dents, just bling, more bling and no go!

[@mckenzie4003]

Fair point. But this one is turning out pretty well, and better than the IH ever could imo

[@vegasfordguy]

@@mckenzie4003 This is very true. It does have a much tougher look to it.

[@michaelstapleton5510]

yea i agree with this statment the white truck started this channel and he dont care bout it i like what the one person said bout him being a few bricks shy of s full deck

[@GustavLindstroem]

NOW it's starting to look REAL good...! Glad you went with the cab flares, it worked out MINT with the headache rack and the stacks. Let's see some driving soon!

[@christopherrichards4205]

Sounds good, since you running a pre emissions engine you can put in a sulfur additive to increase power torque and fuel mileage. That old d 60 will be running normal.

[@davidcaskey4669]

Did he say where he got the sulfur additive I haven't been able to find any for my old diesel

[@christopherrichards4205]

@@davidcaskey4669 no he hasn't, should be able to find it at Napa or orielys

[@davidcaskey4669]

@@christopherrichards4205 tried both here in WV they acted like they had never heard of it. Same with auto zone and advanced auto and tractor supply

[@pennise]

Just add some ATF or Marvel Mystery Oil.

[@jwade94544]

I love the older trucks the Freightliner is a beast and the sound of the engine is awesome

[@atiqueimdad7209]

Waoh what a truck really look attractive.what about international cab over when its gonna start?

[@aaronhayden1780]

atique imdad never

[@atiqueimdad7209]

@@aaronhayden1780 why spare parts not available or any other issue?

[@bubbasharpiln1575]

never , heard it was for sale minus rims and tryres

[@eirickchronister9528]

@@atiqueimdad7209 well he just took parts off of it so is not going in a positive direction.

[@larryspicer3701]

He dont worry about starting them.. He just throws paint and chrome at them hoping they will fix thereself.. Has no clue WTF hes doing.. Guy dont know his ass from a hole in the ground about fixing trucks.

[@philliplozano7326]

Blue Collar looks kick-ass, congrats on another great build ...🚛👍🏼

[@BlakeMerckleTrucking]

Hell them black back wheels would look good on the outside

[@joeyparsley2378]

I love the tire and wheel package. Great job on the cabover. I've got a soft spot for them, especially old Petes

[@scottviers3794]

That Freightliner turned out awesome! I love all the "experts" telling you every video that your doing it wrong. Secretly, they'd give their left nut to own that truck!

[@rustyrods8535]

I bought a cab over Freightliner years ago when I was trucking as a back up truck , it hauled supplies for Burger King And was a 425 Cat 9 speed but once we started using it everyone wanted to drive it ...we deck it out with new wheels mud flaps single chrome stack . It was a blast and everyone loved it .

[@harriettedaisy2233]

Somehow that door doesn't look tall enough for those stacks to go out.

[@8048883109]

I love how I wasn’t the only one that thought of that

[@jruss9109]

Already said last vid they fit barely

[@aquazertz3167]

@@jruss9109 now he put bigger tires on it tho

[@goodrichfarms8795]

That's what I though, damn dimensions...

[@kaotic345]

Thinking the same thing

[@geezeytrippin2735]

Looks great!!!! Small details will pull it all together. Polished steps and deck plate behind the headache rack will really tie it all together. You might wanna do something special when it comes to the deck plate to kinda set it apart from other trucks like a longer polished diamond deck instead of the traditional diamond shaped hole deck plate. I didn't like the build at first but simply love it now. I was stuck on the International build but "Blue collar" is the business!! NICE BUILD NICE TRUCK!

[@RetreatfarmFarmvilleVirginia]

How many people think it won't fit under the door header to go outside?

[@DICEARMY]

Rock Hill Farm Downeast, Maine I actually said the same thing in the last video!!! Lol

[@schlac_9ine5ive37]

They mentioned in another video that the clearance was just an inch or so, so I'm guessing they measure some at least

[@darkmp40]

they should've left the stacks and headache rack off until they got the thing outside if they were smart...

[@eirickchronister9528]

He says there’s an inch of clearance if he lets the bags deflate. U know he will forget and hit the stacks. 🤣🤣🤣

[@lloydsilpot1473]

Ok I c

[@aaronkuchinka2943]

Oh that rig is a beaut. Wasnt big on the cab fins at first but now that it has all the other accessories on it I like it. They definitely go wit the look.

[@isidrorodriguez4268]

Honestly i want to see this truck on the road already!!!

[@charlesferebee263]

OUTSTANDING. ! That unit is WICKED KOOL. That truck was so much easier to restore than that Binder. You and the Boys should be really proud. ! 👍👍🏁🏆😎

[@gabrielmuthler2101]

Last time I was this early, the International still had stripes

[@TwinStix]

I gotta give BW credit ... he knows the ether trick for mounting tires 👌

[@nashtyron]

Okay, I'm loving this

[@freedomlover24-7]

Dang you guys killed it. Motivating me to get my ass out of bed and get busy. That truck is bad ass.

[@TheZombieRebel]

She's looking tuff!💪💪💪

[@TheZombieRebel]

Ben obrien okay, keep on moving on. No need for the shitty comment. 👍🏻

[@dakotasweet9158]

Good looking big truck.Makes me miss my cabover frieghtshaker. Got too watch the knuckles on the big picture window.😇

[@bsells465]

Love how channel turned to restore old semis

[@MrJoe1129uscg]

He ain't done yet, won't be long until this truck dont run anymore

[@goodrichfarms8795]

@@MrJoe1129uscg The mans never rebuilt rigs, he'll learn... They always do.

[@jbynum67]

Love it! I have always been a freightliner fan and you did a fantastic job with Blue Collar.

[@Clones2011]

Bruce it would really cool to see you hook up a trailer and learn to drive this sucker. Lets see it in action!

[@DarrensTruckzs]

Clones2011 does he have CDL license to drive .. anyone know?!

[@davide.burden2043]

I pity the signs when he makes his first right turn.

[@bigford1578]

@@DarrensTruckzs you dont need a cdl for private use at least here in Minnestoa. But I'd get one just to cover his ass

[@ko9446]

If he is pulling his mud truck to shows and events he is advertising this channel. That makes it commercial.

[@bigford1578]

@@ko9446 yup I wonder if he knows that he needs dot numbers on it too. Cant wait for him to get pulled over by MR. DOT

[@cajunman2261]

It's looking good. Put some plate middle from from headache rack to fifth wheel with chrome on top. It will bring it out. Also chicken lights on side cab and bumper 😎😁

[@gutwrench1961]

Watch those stack flaps going in or out the door!

[@goodrichfarms8795]

That's what I keep thinking, hes gonna RIP those suckers right off!

[@wheeln24-79]

He said they barely had room. But that was before he put new wheels on it that raised it. Now it's definitely not gonna fit without taking them down

[@gutwrench1961]

Blip the skinny pedal and they open up and they gone

[@goodrichfarms8795]

@Mike That's a good idea...

[@kennethwoleslagle6684]

watch the tape when he back the truck into the shop,and look how high it is now, NO WAY OUT !!!!!!!!!!!!!!!!!!!!!!!!!!

[@towncoupe]

BLUE COLLAR Looks amazing !!!!! Great choice of Truck and Option 2. Enjoy Boys !!!!

[@parkerfrey9861]

wait i thought the cab flares were coming off? or did yall decide t leave them on to cover up the paint and the front of the headache rack

[@gio_del_3008]

I think he put them bavk on to cover that gap between the cab and the

[@gio_del_3008]

Rack

[@eirickchronister9528]

They look like total shit on. Look at a restored cabovers none have that bullshit on

[@bradthacker9904]

@@eirickchronister9528 no looks way better.

[@loftiefleet8104]

she bloody beautiful truck now am glad you put the side deflectors back on.Loftie from Australia.

[@richardkraft6809]

Never jump from the cab, coming from a retired driver,

[@Bumblebee4788]

Exactly, I sprained my ankle jumping out of my mixer, someone I worked with also broke theirs.

[@joshcoleman2365]

I do every day 89 co9670

[@goodrichfarms8795]

My Grandfather did it out of his old International cabover when he was young, his legs are damn near shot...

[@HVACRBERT]

works fine for years wait he is 60 and getting his second set of artificial knees installed been there done that ran chicago for 20 years running ltl freight 30 docks per day wish i had just used the steps and handles

[@vistalite-ph4zw]

I jumped down from a trailer and trying to pull the door down like on a commercial I saw as a kid. Almost ripped my arm out of socket! 😩

[@robbierollin4440]

Job well done!! You should be proud of your self for taking such pride in your ride...again Job well done!!!👍🛠🔧🔧

[@ChiefStones]

Now with the chrome wheels put the chrome fenders back on and see what it looks like.

[@eirickchronister9528]

It will look like shit. And I don’t even have to see it

[@DaveJohnsonad5nm]

I think he is mostly planning to pull his mud slinger with the truck, don't really know that for sure. Full fenders over the axes may be more hassle than their worth.

[@arcticenterprises2337]

Great progress on the Freightliner !!! now a clean install would be a pipe from the turbo to the y-pipe instead of all that flex pipe

[@rammatic7881]

When he said the old owner was coming to buy the old tires, he pointed over towards the cab over, and for a split second I thought he was going to sell the IH...

[@scranch18121]

he will..... more and more parts are missing in the videos

[@bigford1578]

And the engine is in pieces

[@andrebeland8218]

Don't worry about the door. Ever heard of people building boats and airplanes in their basements? LOL There's always away!

[@scranch18121]

@@bigford1578 He constantly has 'Squirrel' moments. Jack Russell Terriers get that all the time. Remember he also purchased a third 'Parts Truck' . Give it a few weeks..... he will start polishing the chrome on that one too.

[@bigford1578]

@@scranch18121 a 855 Cummins isnt hard to rebuild he just needs to focus

[@davidshockley2383]

Blue Collar looks sic. Glad you kept the paint.

[@lynw492]

Put the full fenders on, they looked sick.

[@phil8742]

Awesome work gentlemen!! I'm very impressed in your ability to order parts and get the work done within a short time frame.

[@PaulyWit]

Still hasn’t painted the grinding by the flap holders...

[@Owencarmody]

if he's gonna use the truck, the paint will get chipped anyway

[@myrodeo100]

Looks GRRRREAT!!! So glad it was used oil in the fuel and not something worse. Common practice back when. Pour the used oil into the fuel rather than dispose of it under EPA regs. Now, next question... Will it fit under the door? Those stacks look pretty tall.

[@Nichodo]

@0:07 Wheatley: Surprise! We're doing it now. Sorry for the portal 2 reference XD

[@shermangershman9011]

I love the front bumper! The rolling stock is decent. I LOVE, and I always have.... those mud flap holders with the tail lights built into them.

[@wwrite]

Idk if it’s just the camera angle but will the stacks clear your bay door?

[@davidmathay7117]

I think in another video he said they would clear, but not by much. Maybe an inch or two?

[@jruss9109]

Yup said it'd clear last vid

[@vistalite-ph4zw]

Or he could dump the bags to make clearance...

[@DaveJohnsonad5nm]

He said the fuel tanks were full of fresh fuel I'm guessing he didn't carry that many 5 gal cans. 😆

[@brandonpryormusic]

Puggie Popo but he just put new taller tires on, so it might not.

[@anthonycastruita2492]

The freight shaker looks awesome btw. And the smaller tanks do look better than the bigger ones.

[@danielscott6787]

I guess you've never seen a Semi tire explode while being filled with air before??

[@dozer1642]

Daniel Scott you’ve never handled truck tires before have you?

[@MICKSHRED]

I've always wondered about bad stuff like that but my friend and his dad have ran there own mobile truck ture service. I asked him about it and he told me pretty much on new tires you dont havto worry too much but on old tires you gotta watch for balls and if you see one form stop immediately.

[@bon2198]

Split rims always scared me, just about all our equipment had them in the military. if you’ve ever seen the split rim cage with a giant dent in it, you learn fast how dangerous they can be of you don’t know what you’re doing.

[@danielscott6787]

@@dozer1642 Yea. Right. I GUARANTEE you I've seen a brand new- Steer tire- explode in the cage at the T/A in Amarillo,TX. Because it was MY steer tire with a brand new Alcoa Aluminum rim.

[@rocketqueen7355]

@@dozer1642 😂profile pictures

[@ronclifford3336]

Looks Good. Dont forget to grease the 5th wheel before you slide it up under a trailer. I always used the red grease and just run 3 or 4 U shaped lines of grease across it from one side to the other. Then as your trailer turned on the fifth wheel it would spread it over the entire 5th wheel.

[@robertryancurry2984]

It takes money to make money and keep doing what you love doing. All ways never let someone tell you that you are not able to do something

[@stevenpdxedu]

Bruce & the Crew, y'all kicked ass on this one. It's been relaxing, interesting and informative to watch. The comments were really good as well. And you've finished in record time. Hooray! Thanks for the fun. Can't wait to see what gets finished next!

[@joelbeukes]

Ever checked the wheel bearings or brakes?

[@brandoncook6057]

Blue collar lookn good!!! Maybe some simple quarter fenders in front of the drive tires to add some bling to the frame and keep rocks from beating on the back when you lev places that have alot of gravel

[@seanpower7574]

She's nearly done so it's nearly time to park it next to the other cabover and buy a new one and start that one instead

[@eirickchronister9528]

Lol yup and that’s were the third part truck comes in.

[@waynehammond4964]

Never even thought about Big Rigs but you have made me want One !! it looks exciting

[@buckyboys1]

She looks great Bruce even love the color. Peter NZ.

[@tyvianc]

Yo Bruce, I'm not a fan of Detroit Diesel, but I'm a Cummins guy. But I love the way you changed the Freightliner so far, and it was good to see the white cabover as well. Keep up the good work fam, and it's a pleasure to follow your channel and the work that you do. #truckersforlife

[@justinhobart8747]

No balancing beads??? Dude, I think you forgot balancing beads!

[@jguilmette]

I hate the beads and the goop none of them work. Either balance correctly or just run it

[@justinhobart8747]

@@jguilmette I don't know we always used beads at the tire shop when I worked there... I didn't have the experience with the semis that was the boss's deal to take care of them... but he always use them, and never had any complaints, or issues with them working as far as I know, and he had several years experience working and driving semis.

[@johndabato3316]

Never had worries with the beads. Now with the larger size tires it should be fine. Had some on the last two trucks I drove and no problem even with no beads nor weights. Have to admit, cool looking highway machine, and with the length of the frame, should be a rolling couch!😎

[@byrinmurphy6722]

On a truck tire you use the valve stems to balance the drives tires out and the steers don’t need to be balanced.

[@xeronicus]

I'm more surprised they didn't air those up in a cage.

[@onyxdeceit]

Blake is the mullet king. Cleetus McFarland would be proud.

[@TheGetsum03]

No way it's making it through that door now 😂 looking good though

[@davepelfrey3958]

Looks amazing Bruce, nice job. Looks like it's ready for the dance. Stay safe guys.

[@76tryg]

These guy must have an endless amount of money to toss into old trucks. Crazy

[@rammatic7881]

Jibs09 he makes a LOT of money from KZbin and sponsors. Go look up a “how much is Bruce Wilson making” on KZbin.

[@edsmith6504]

@@rammatic7881 Did he ever beat the rap on this? www.fdle.state.fl.us/News/2018/January/FDLE-arrests-former-Dade-City-Police-officer-on-in

[@rammatic7881]

Ed Smith DAMN 😂 I didn’t know about that... I’m not surprised tho. I never liked Bruce as a person, he is foolish and stupid (obviously). I only watch bc there are cool trucks and tractors. I don’t even bother liking the videos...

[@rammatic7881]

Ed Smith kzbin.info/www/bejne/hGG9hoSrjqhqo5o

[@betitome]

My 3 years old son loves your trucks. Saludos desde Argentina.

[@BADHABIT571]

Damn . . . The Quarantine has EVERY KZbin Certified Diesel Mechanic and Google 3-D Architects Panties all wadded up . . .LMAOOOOOO Keep up the Good Work Guys . . .

[@JasonSmith-vd1sz]

The truck turned out great! Thank you for sharing thoroughly enjoyed the video.

[@Gantzz321]

did anyone measure the height of the stacks on this truck, cause they look too high for the door now?

[@abilaville3818]

yes! they just scrape through with an inch to spare, it was mentioned in an earlier vid

[@marckimmett8659]

Abi Laville yes, that was before they lifted the front tires

[@justinhunt5370]

Marc Kimmett they didn’t lift the front just bigger tires and not by a ton and the stacks aren’t in the front. Lower the back bags as much as he can and hope she fits is about what there gonna do lol they did measure tho so she should

[@abilaville3818]

@@marckimmett8659 Oh! thanks for that- in that case - yikes :-)

[@mikehoncho8268]

Did he buy this truck to try and be like WhistlinDiesel?

[@Red-Eagle]

You boys did an amazing job with that truck. A 98 brought back from the dead.

[@applicator40usa69]

So many know it alls on here. Real easy to pick apart someone else's work. Why don't you commentors do a project and film it.. Good work Bruce and guys. You really busted your asses to get this much done.

[@DaveJohnsonad5nm]

You already had inner wheels. On the starting fluid trick, it would be best to pop the bead and allow the air to bleed back out to let the either out. No one expects a blowout and with either still in the tire you'll never forget that blowout. I always replaced all 10 at the same time. When I replaced them I always put about 5 lbs of nitrogen in each just to neutralize any either that didn't come out with the air. I had a truck stop replace a tire once and didn't know they used either, a used tire. Before I made it home that tire blew. I pulled chemical tankers and the fire ball was impressive and alarming at the same time. Your truck your tires, I'm just expressing a concern you may wish to consider. By the way the wheels and tanks look great.

[@keithsmart8437]

Mud flaps that long wont be on there long when you back up you may rip them off 36 yr driver here better stay on blacktop get anywhere soft they will be gone

[@alanlanghorn9528]

Yes thinking the same thing soon as backing up they fold under and rip off

[@eirickchronister9528]

Yes sir I agree I’ve been out here 30yrs. He rolls into place were there is mud. There going to be ripped off.

[@davidcaskey4669]

Drove coal truck and had to hang them up when we went to load and when you backed into hopper to dump if you didn't keep them long the D.O.T. would bust you in a heartbeat same thing if you haul blacktop

[@keithsmart8437]

@@davidcaskey4669 I hauled coal also till it went to hell 2 power plants went away and 1 went to gas then went to hauling gas till I had back problems had surgery and Dr's disabled me . Yes DOT always wrote us up for them being to short but really how ever many inches behind the tire is how many inches off the ground they should be .We had this one DOT man that we called Mudflap cause he always wrote us up for it

[@davidcaskey4669]

@@keithsmart8437 yes they love the mud flaps and got to make sure it's not a graveyard load that's a stop for sure

[@waynehutchins4472]

1 of tha best lookin Freighters ever made ...we lov the ole bangers ova here in good ole Australia ...

[@8760-x8z]

Wayne Hutchins of course not. Anything that can’t be chromed or half assed is boring.

[@garyduquette1784]

What about balancing the tires???

[@1Builtcummins]

You don't have to balance commercial tires, some will balance the steers though.

[@1Builtcummins]

@Big Wheel Like I said, you don't have to but some do. It's a cost thing, your company ran super singles which would make the cost and time to balance alot cheaper. You have to think about companies that don't run super singles and what it would cost and the time it would take to balance 8-16 tires. You most not be the money man for your company.

[@Chicagoguy1984]

GREAT to see a classic cab over back on the road !!!

[@kgroulx4032]

I would keep the PTO to install a combination welder generator

[@norman69ish]

I like a stretched drive but a cab over, with dual stacks. Sweeeeet!!!

[@brendenbopery8673]

Can we get back to the longer vids? More stuff getting done in one vid....I feel like the past couple vids have just been teases

[@sporttruck5103]

Looks AWSM ! That truck definitely needs Old-school style stripes, maybe black or dark blue ?

[@stylesp7465]

Who else thinks he should keep on the PTO

[@jedidiahvette3924]

Glad you put the cab fairings back on. It looks so much better with those on there. That poor compressor must have ran it's ass off mounting and filling all those tires.