Williams Mobile Clutch Service. Week 22/08/22. Video Log.

07376369067
www.williamsmobileclutch.co.uk
Support the channel:
www.paypal.com/donate?hosted_...

[@WMCS]

www.williamsmobileclutch.co.uk 🇬🇧 Contact Us For your Clutch Replacement.

[@kennysmall8249]

It’s been 30 years since I last changed a clutch .. I wouldn’t even attempt it now! Much respect to you for your highly professional work and standards .. great to watch! Thanks for posting :)

[@WMCS]

Thank you Kenny. Really appreciate the feedback and support

[@libaaxalee]

This channel should be called one man show :), great job.

[@OTEP1234567891011]

I love your stoicism in dealing with the rain. Cool, calm, you don't work any faster or panic--you just keep going and get the work done. I cut trees for a living in Nashville, Tennessee. When we see rain, we panic and call it a day. lol. Much respect to you and what you do. Wonderful video.

[@WMCS]

That’s it mate .. when I see the rain I think wow what an opportunity to make some sale. Everybody is home and don’t want to be going out to garages. And most mechanics will be calling it a day 😁🍻🍻

[@OTEP1234567891011]

@@WMCS Damn. I need to start thinking like that. I use rain as an excuse to be lazy and lounge around and I definitely could be doing something.

[@jn3750]

You deserve every penny you charge!

[@a3845316]

nothing but respect you! I really like ur vid replace clutch looks so easy to u. I only mobile service a crafter 2.0 before.

[@WMCS]

Thank you.

[@MP-po6fj]

Ex Car Mechanic of 15 years . hats off to you doing this work on your back. You make it look so easy and effortless. You seem to keep physically fit which is key doing this type of work and also some Yoga to look after your back pal. Always enjoy watching the video uploads. Hope your well paid and look after your back

[@WMCS]

Thanks for the feedback. Means a lot coming from a fellow mechanic.

[@MP-po6fj]

@@WMCS Not a bother Kevin total respect for you doing this hard graft yourself on the floor with a trolley jack and no one to give you a lift in and out with the Gearbox. You are for sure skilled and have it down to a fine art. Also Put plenty of foam mats down to stop damp coming up through in later years pal.

[@pequenagner]

Como siempre espectacular y todo un profesional ole ole ole. Mis felicitaciones eres un fenómeno.

[@oscarmontero5724]

Glad to see you back! Hope you enjoyed! And now it seems you have a new Clutch Lair! Congrats!

[@WMCS]

Oscar ..!! Great to hear from you… really happy to get your feedback again.

[@Djm9393]

full send bro never lift mobbin deep! glad too see you back have a good weekend brotha!

[@TheITMechanic]

It seems you enjoy every moment of your job! Hats off to you 👍

[@robertorodriguez6772]

As a car guy i have a tremendous about of respect for you my friend. Being organized with a plan in important. Salutations from Hartford, Connecticut U.S.A.

[@jemmace2586]

Good to see you're still busy, you still make that look easy. All the faffing about with the clutch hydraulic lines, bleeding etc would take most of us a day in itself! All the different makes and models as well. 👏

[@WMCS]

Thanks for the feedback… really appreciate it. That’s it. Gotta keep them cars on the road. That’s my life’s mission.

[@chalikuddin5700]

Your videos are so clear you make it so easy but it’s a tuff job

[@zadeanrobinson1608]

You motivate me 🙏🙏 thank you so much for your work.

[@geraldfahey8411]

Well done Kevin you made that look easy enjoy watching.

[@WMCS]

Thanks for the feedback…

[@mattsilver8519]

Glad to see you back Kevin have a great weekend pal and as always really appreciate the upload 👍

[@WMCS]

Thank you Matt… I nice little break to get me back into the swing of winter

[@alexlucyrep9948]

Excellent work cannot fault this mans work very pleasant clean tidy saved for any other my friends in need of a clutch and omg was my clucth foo bar thank q very much ,,,,,

[@WMCS]

Thank you for the work Alex … it was a pleasure to meet you. Kind regards. K-Albert Williams.

[@markwilliams2830]

Good to see you back Kev.That C Max must have been misersble to do with all the rain.Also I thought the Jazz 'box was touch and go to get out! Appreciate your time in uploading the content .Nice to ride Shotgun

[@WMCS]

It’s ok. Just a little reminder of what’s to come end of September.. the old rainy season before winter. The jazz had the same box as a civic .. there was a few painful moment getting to the rear gearbox mount and to remove the lower ball joint driveshaft had to be knocked in. A bit of faff .,, but ended well.

[@jeandiamfoumfou2549]

Salut mon ami je suis fan de toi sache que t'es vidéo m'aide de beaucoup et continue à nous faire savoir tes compétences dans la mécanique bon courage à toi encore bravo 👏👏👏

[@WMCS]

Merci

[@ionzaharia5078]

Excellent work !

[@maxthecaddy8451]

nice to see you back Kevin, KZbin is worth watching again 👍👍

[@WMCS]

Thank you Mike. … was a bit rusty. But will be in full swing this coming week with usual two uploads.

[@Yash241]

Welcome back:) we all missed you for two weeks😉😉😉

[@WMCS]

Thanks mate. Really appreciate the feedback and support… only one this week but should be in full swing next week.

[@timclay1344]

Nice job Kevin as always have a great weekend buddy

[@WMCS]

Thanks Tim… great weekend to you as well🍻🍻🍻

[@Snip59]

Excellent work under pressure indeed.

[@LLOPEZJF]

Thanks for share your knowledge !! is awesome.

[@alessandroandjelkovic8761]

Much respect 👊

[@soulaymane5636]

Salut kevin, ravi de te revoir après ces quelques jours de vacances bien méritées. Prends soins de toi et de tes proches, brother.😉😀👍🤲

[@WMCS]

Merci soulaymane.. et bonne Dimanche a vous …

[@MegaSensimila]

Respect , good job

[@alessandropezzella4121]

Grandissimo 👍

[@H1111H]

Hello Kevin , Nice Job and Nice Weather Today🙂

[@WMCS]

That’s it. Getting a bit more bearable now the heat wave is gone …

[@gerardarnaud1383]

Magnifique travail, félicitation

[@WMCS]

Merci beaucoup Gerard.

[@unl3ash3d007]

the GOAT.... man so many respect!!! this man has neck like mike tyson !:) he has LUK Points on mass ;)

[@avtopodbor_tj]

Привет мой друг, я фанат твоего искусства! В Москве работаю автомехаником 😉😉👍🏻👍🏻👍🏻

[@truth_only4082]

We need to see close up on all levels and on each bolt as your previous videos. This video didn't show a lot of the bolts being un done. I really appreciate all your videos. Thanks

[@WMCS]

Try subscribing before making this type of comment.

[@landyman26]

Great to see you back. Take it easy mate.

[@WMCS]

Thanks Phil… had a little bit of pampering time off 😁🍻

[@peraltamenta]

You are the Master

[@Amine_1994]

I love this job, I have 8 years experience and 3 diplomas in car mechanics, and I hope to work abroad one day 

[@shaagealgareb9189]

thank you

[@WMCS]

Thanks for tuning in

[@rii7075]

勉強になります。ありがとう

[@georgeclarke1183]

I did an mgb clutch back in 1980 when i was very young was a hell of a job the engine and gearbox had to be removed what a very heavy lump it was wouldn't even attempt it now

[@Dark-Lord3386]

You make it look easy my friend lol

[@WMCS]

Thanks for the feedback

[@johnclennell5799]

Curious to know the reason you sometimes lower the front wheels onto those short boards before torquing the wheel nuts? Another fine example of your work. Well done. Thinking about it.. Is it so you can slide the jack out when working on cars with low ground clearance? Just drive off the boards to complete the job.

[@ferreiramiguel2910]

william big one

[@WMCS]

Woop Woop 🙌

[@MrToddy2012]

You done an a6 c6 in any of your videos if so which video .. and total credit is deserved here .

[@Phil-1969]

Afternoon Kevin I’ve been looking everywhere for them clutch’s and you have moved them

[@WMCS]

That’s it Phil. Thought I’d give them a better life prior to a life full of RPM. So they now live on a shelf 😁🍻

[@arturofatturi9490]

@Kevin-Albert Williams Excellent work and dexterity in handling tools and car parts. I own a Nissan Versa Hatch (here in Brazil the name is "Tiida") that has a dual-mass flywheel, I see you change this part a lot. Here in Brazil this car part is very expensive; Do you recommend cars with dual-mass flywheel? Is the cost benefit worth it? Great video. Sorry my rough english. Stay safe

[@sd8492]

Salut reprise du travail 💪

[@WMCS]

Merci beaucoup. Et salut a vous aussi

[@brianmason8400]

Glad you're back! Hopefully you enjoyed vaca or wherever..... Just curious, did you ever work in a shop and the tool boxes in your truck were your top and bottom box? It's satisfying to see a professional at their craft going so efficiently. Great video and again, welcome back.

[@WMCS]

Yes that was the case. Previously I was working for Land Rover.

[@stoqnesko]

Great work! Hats off! I wonder how does this service make sense in the UK, can anybody explain the reasons? I am in eastern Europe and this would not make any sense, even if you have to pay for a tow truck to the shop or have somebody pick up the car from your house.

[@janritter2734]

Gościu gdzie masz wózek na kółkach pod plecy na stare lata to ci się odbije na zdrowiu

[@mrmusicmanic]

Hey man, big respect out to u for doing it mobile, I have been in the trade 30 years and a bit burnt out with it. So enjoyable watching someone like yourself. One question though, do u ever take a rear main crank seal with u just in case they are leaking ?

[@WMCS]

Thanks for the feedback.. much appreciated. A long answer to a short question : I don’t., purely because if the rear main seal is leaking it’s not because it’s faulty. It’s because there’s a bit of Free play in the main crank bearing. Replacing a seal will temporarily mask the problem. The correct way is to replace both big end and main crank bearing then install the new Crank seal… This can all be done in a matter of hours whilst the gearbox is out. But most of the time customers don’t really want to pay the extra to do it correctly.

[@jemmace2586]

I didn't know that Kevin, cool. Not that I'm going to be doing that anytime soon, i hope? 😲 Still though, hopefully I'll remember if it comes to that. 👍

[@jemmace2586]

@@WMCS actually thinking about it, I had a vauxhall astra 2.0 dti, it threw the crankshaft pulley just driving about one day, i replaced it but there were still issues with it afterwards, the block itself leaked below the rocker box and it threw up engine warning lights when I went on the motor way. Needless to say it got too much with my knowledge and budget at the time so i scrapped it. I think the same instance applies to do with your answer to the good question asked previously, had to be the crankshaft trueness that was the problem looking back now. Well you live and learn.

[@user-ou8oy4zi1y]

Приветсвую, другие работы по автомобилям выполняете? Или только замена сцеплений?

[@ELCHAPO.]

Super Job gemacht aber warum sprichst du niemals 😂😂 welche Marke ist die beste zum kuplung wechseln und welche die schlimmste und bei welche km Laufleistung geht die Kupplung kaputt👍👍👍

[@stephencooper3067]

Only attempted clutch once, on a Megane (the shaky arse model). Helped do one on a Mk2 Capri once (beautiful car). Wished i'd see these videos long ago would have been so helpful, i realise how un-prepared i was after seeing how to do it properly, Quick Question. When you jack front end up are you lifting it on front subframe? Always been worried (for no justifiable reason) of doing that. Would make life allot easier going forward. Also id love to know if you have any tricks or tips for seized ball joints and things. You must see some horror shows with things like that.

[@WMCS]

I remember that advert 😁 Yes there’s a folding part of the subframe that’s reinforced. That’s the spot. Lots of WD40 a good hammer and chisel. Life is a lot smoother then

[@fabiomanda2154]

WOW! Great work! I should soon replace the clutch on my Audi A3 1.9 tdi. My problem is raising the car enough. How high should I lift it? How high do I need the car jack stands to be? Greetings from Italy and thanks in advance.

[@WMCS]

About knee high or 1 ft from base of wheel up in the air.

[@maverick507]

Hey🏅how are you doing ? you took a few days off ☀️ have a nice weekend mate

[@WMCS]

Hola 👋 amigos… salut et bonne weekend. I’m doing great. Happy to be back on the scene. Been MIA for too long it feels.

[@chalikuddin5700]

How far can you travel vw polo 1.4 petrol 2005 clutch replacement

[@robertorodriguez6772]

How long does it actually take you to do a clutch job on an Audi A4 ??

[@tmicor7092]

👍👍👍!!!

[@powersterk]

Hallo Kevin how are you.? welcome back to work , how was your vacation 👍👍

[@WMCS]

Ohh… vacation was nice … I did some soul searching but still couldn’t find it. My next one would be to find my marbles …🍻😁

[@DependableAutoTruck]

wish you would show the process of bleeding the clutch after lave cylinder replacement

[@WMCS]

You need to subscribe and you can browse the channel for full repair videos.

[@DependableAutoTruck]

@@WMCS i am one of your subscribers and watch all the time but never have seen you bleed the clutch

[@Mistrzu667]

@Kevin-Albert Williams hello I have a question what tools do you have from milwaukee and do you recommend milwaukee?

[@WMCS]

Yes I recommend it very much. It’s reliable and have a very high torque range. In my opinion best in the business. Only downside I’ve found for me personally. Using it everyday under extreme conditions I have to buy a new one on average every 18months.

[@sasapavlovic5453]

👍👍👍👍👍

[@marktucker208]

I’m curious. Which car would you say is the easiest and which is the hardest to work on? Like are there any cars you dread when the customer comes phones?

[@WMCS]

That’ll have to be the New Mini Countryman 2.0L diesel … haven’t done one yet. But I’ve had the chance to thoroughly inspect it …..

[@fididoma]

It is never raining in GB?

[@serviceteam8408]

We always Follow you, but in the videos you don't show if you pull the screws of the clutch flywheel with a torque key .?

[@WMCS]

Subscribe and access full repair videos on the channel. 🍻

[@serviceteam8408]

@@WMCS we are registered , how do you see .!!

[@georgeclarke1183]

are these luk clutches a quality product you seem to fit them all of the time are they as good as the original factory fitted item

[@WMCS]

They are the Original for most cars. But manufacturers just put their additional stamp on it.

[@agaticdaniel]

Great job 💪👍...Can you tell us what milwaukee tools you use?Some spec.?

[@WMCS]

I have two impact .. one is the M18 fuel high torque : 2800nm The other one is the M18 fuel one key to adjust torque and rotation in degrees. The ratchet is the Fuel long reach.

[@agaticdaniel]

@@WMCS you doing great job whit that 💪

[@LAMECCANICA-channel]

Kevin Top 🔝 🔝 🔝

[@J.O.V.A.N]

Your Impact wrench Milawukee is 1/2 or 3/4?

[@WMCS]

The wrench is 3/8 and I have a 1/4 as well. 1/2 drive will be too big to get the job done in my opinion. The impact gun is a 1/2 drive tho.

[@Tahsin_Hussain]

Can you change "Steering Wheel Rack" for Vauxhall insignia 2009? How much will you charge please?

[@WMCS]

Clutch service only.

[@bigdave8324]

What clutch for 2008 Jeep Wrangler jk 3.8 engine is best. Thanks

[@WMCS]

Unfortunately I’ve yet to do one.

[@mrgrumpy5116]

Mansfield .. know it well, not there now though .. hope you're not too hot under that motor 🥵

[@WMCS]

Are you from up there mate .. I’m branching out more further North .. 😁🍻

[@mrgrumpy5116]

@@WMCS Chesterfield

[@sophiearama187]

Salut toujours au top quel kit d'embrayage pour c3 hdi 70cv Luk ou Sachs ? Merci

[@WMCS]

LUK… funny you asked as I just finished doing one today.

[@MrJAPAN4649]

so Let me know about What kind of car no Stick shift in UK ? Only Prius ? lol

[@WMCS]

Even Prius is stick shifter 😁🍻

[@judoguy1975]

How much did you charge for that travel time ? Nice job

[@WMCS]

I don’t charge for travel. Just for the repair. I don’t even put a mark up on parts. I let customer have the full warehouse discount I get. Times are hard for a lot of people. I only charge for my labour once I’m onsite.

[@amar8746]

Hi Kevin. Do you have any uploaded videos where u replace clutch on a VW 1,4 160HP engine? In my case a Passat. Best regards

[@WMCS]

I’m gonna have one next week. But that engine is in a polo. I won’t do a full repair video but it will be in the weekly one.

[@amar8746]

@@WMCS - looking forward for that one👍 amazing work buddy, keep it up💪

[@mustaphab3439]

hey topper what model milwaukee are you using kevin. the big bulbeur (machine). Thanks

[@WMCS]

It’s an M18 Fuel one key.

[@mustaphab3439]

@@WMCS thanks Matt

[@user-uf8_azamat]

🤝👍✊👏

[@peterjones2241]

Hi mate, I put a gearbox on my 07 fiesta 1.2, I bled the system 2 man, after about a month I noticed struggling getting into gears, I bled it again and loads of lacrosse bubbles came out so I re-bleed the system till no bubbles, then a month later same thing. The fluid hasn’t dropped in the reservoir and I can’t see no leaks. Is it possible it’s sucking air from slave cylinder or is it that there can be still air trapped in system. Thanks mate any advice will be appreciated.

[@WMCS]

It might be the slave cylinder is faulty. Not unheard of. But just check under the master cylinder. (Under the clutch pedal). Check for any moisture around the gaiter. See if there’s any dust stuck to it. That might be an indication the seal is slowly leaking.

[@peterjones2241]

@@WMCS thank you mate, I’m dreading taking the gearbox off again to replace the slave cylinder. I’ve checked the master cylinder and no moisture, I bled it yesterday, I checked it today by bleeding it back to reservoir so I don’t waste brake fluid and there weren’t any bubbles, I’ll leave it for a week and bleed it again or when I feel the clutch bitting point is closer to the floor. Now it bites about half way and when it gets worse it bights closer to the floor. Thanks 🙏 for your help

[@Andy-co6pn]

Shame you're now too far away to sort my transit. Should have got it done last year 😬

[@WMCS]

Really sorry about that Andy …

[@Andy-co6pn]

@@WMCS No need to apologise, I should have got it done when I got your quote, killer price, but I put it off. Now the slave cylinder has sh*t itself, luckily just as I got home 🤬

[@lysongrzes27]

💪💪💪🇵🇱

[@Foxbuster]

Did it ever happen to you that you installed a clutch wrong and when you finished it was not working correctly? Great videos, you work in every weather, props for that.

[@WMCS]

Thanks for the feedback.., as of yet no.. but there was one instance I couldn’t figure out which way the plate’s position was on a C4 so I rang Valeo’s head office ..

[@iolauiodau2166]

A shoot with Renault Scenic 2 ai?

[@WMCS]

There’s one on the channel mate. Have a little subscribe and feel free to browse

[@hamza78]

This is quite impressive how you do these clutch replacements. Do you typically torque all bolts to specs or go by impact feel for various bolts?

[@RoadRunnerMeep]

1 ugga dugga at least

[@Mr11ESSE111]

his tool worth more then this Audi

[@baruhkit5424]

what MIlwaukee impact you youse?

[@WMCS]

It’s the M18 Fuel. High torque.

[@baruhkit5424]

@@WMCS i know What's the model number?

[@brunoklein4632]

was on vacation 😀😀

[@WMCS]

Yes mate … had a bit of time off to meditate towards the winter. ☀️☔️ 🥶…🍻😁

[@jimmyhendricks1281]

Williams mobile ninja clutch service

[@WMCS]

The greatest guitarists himself. I’m honoured

[@janritter2734]

A uszczelniacz na wale nie wymieniony