Wireless GO (Gen 3): Features and Specifications

[@Kuzoo]

So it is basically the wireless pros, without all the equipment, but with a lot of new colours 🙌

[@DaniAlexandria]

That's what I'm thinking what is the downside to the go vs the pro at this point ?

[@martinXY]

Two lavaliers and a charging case that add up to about $500 if you buy the Go system and then want the extras, or a $280 discount on the Pro. It's good to be able to get the wireless pro mics without the sundry equipment if you don't need it.

[@ÁzsiábaSzakadtam]

It's bulky and expensive. They miss the point of using a wireless mic. It should be SMALL. Now you can wear a big red box...

[@RastaHenkie]

@@DaniAlexandriaPro version got timecode for syncing audio between multiple cameras

[@martinXY]

@ yep. Colours would be acceptable for the Rode wireless micro, but not for something as large as the ME.

It is practically a RWPro without timecode, which is fine for a regular user. I'm a professional and an ex WGII and a WPro user and I'm glad to see all this in this new device, that means the next pro is going to be even better! For me, I only ask for 2 things to make my work even easier: - A dedicated headphone output, so I can monitor the audio directly from the receiver while I keep the receiver sending the timecode and backup audio signal to the camera. - A way to sync timecode on two or more receivers or have a dedicated device just for timecode in a multicamera environment. Usually I record every interview with two cameras and I have 2 pair of RWPro, but they are not completly in sync. Thanks RODE!

[@CNCTurboStep]

RODE teased in an earlier FAQ that they were working on synching the timecode of the RWPro to external devices. This has obviously not happened. They can't even sync properly to a phone (error of 1-2 seconds compared to the phone clock). Come on Rode, you can do better than this! I for one won't be investing in any Pro2 just to get a properly working timecode sync.

[@rodemic]

These are awesome suggestions! We'll be sure to pass this on to the team 🫡

[@righthererightnowproductio9525]

@@rodemic Really, please let us use the USB port as an analogue out, even if there's interference. Monitoring doesn't need to be clean as long as you're onboard recording. I basically don't use my Pro's timecode because it's too annoying to use splitters.

[@JojoJoget]

Would be weird if you didn’t have a timecode generator like Deity’s lmao

[@TransplantHelper]

This should be called the wireless Go Tom Buck addition. The colors are right up his alley.

[@DaniAlexandria]

can't wait for his review

[@kurokid2441]

can't help laugh...@tombuck

[@johnhurlbut]

I was thinking the same thing 😂

[@tombuck]

That bright blue... ...and green/purple/pink/orange/ALL of them 🤤

[@milosristic4091]

@@tombuck 😄

[@SportFlow]

Could you please make the RODE logo bigger? It is not intrusive enough. Yeah, what pros are really demanding are bright flashy yellow colors for a mic, this is exactly what we want. Thanks.

[@masterinico]

I feel like the only targets of the colors are public vloggers

[@veryboringname.]

I don't think this mic is aimed at pros, who would be using a beltpack and lav.

[@masterinico]

@@veryboringname. I use mine during weddings and people often use them in other types of interview type videos. For anything where the WG3 would be concealed making it in colors is either pointless or takes away from the importance of the speaker. Film pros or higher end news channels likely wouldn’t even be watching this video or care about Rode products I agree there.

[@veryboringname.]

​@@masterinico For more prosumer/semi-professional use, Rode has the Wireless Pro. It's black and has a locking mic connector for a lav - more professional shoots would typically use a lav rather than any sort of clip-on transmitter. For more casual users - which is who this non-Pro range is aimed at - it's completely different. Some content creators fully embrace the mic, holding it in their hand and talking into it. With this sort of more more casual content, sticking a little box on a shirt isn't a big deal; some users like themeing their sets or clothing so might pick a mic that's coloured to their theme. It's great that RODE gives us choice. Content creators who need a more professional look can get the Pro model, those who are more casual can get the black non-pro model, or pick a colour based on their theme.

[@petfajnder6014]

chill bro, if you look at the video, its obviously made for women.

[@SLSMusic]

This color is so Tom Buck😂 It’s always happyto see RODE announc new product, but i think RODE’s gonna need to do more in order to impress users while competing with DJI or Hollyland. There are many cool new features indeed, but most of them aren’t the first thing people really care about. The most important thing you need to consider is the SIZE, BATTERY LIFE and the BIG LOGO. People are trying to hide the mic while using them, and most times they also not even willing to use Lav mics while using wireless mics. Most users who buy these kind of products just need “simplicity” and “low profile”. Oh and I personally would like to see RODE enable the USB-C capabilities between these Wireless series with RodeCaster Pro II, that would be awesome.

[@Chaz_r]

So basically they listened to every content creator and delivered!

[@SamandSteve]

Great job Heen, lovely to have you back.

[@donbullock-techihound]

I’d love to get one to go with my Rodecaster Duo BUT the batteries aren’t replaceable. Your technology is outstanding and will last long after the batteries die. You need to start thinking about all the waste.

[@JJohnson313]

So make more batteries? Wouldn’t replaceable batteries create more waste ?

[@nickglover]

What? If the batteries in these die (permanently, which they will eventually), you have to replace the entire unit. If instead the batteries were replaceable, you replace only the battery. Either way they would be producing batteries, but the overall waste is less.

[@JJohnson313]

I still have the original Rode Wireless units, and their batteries are still working. If I had replaceable batteries, I would have bought multiple ones and would have them lying around, probably losing some along the way, which would create more waste than if I had used the rechargeable batteries. I understand your point, but it doesn’t work in the way you think. Making them replaceable doesn’t necessarily make them better; it could even make them worse, depending on the user.

[@MegaRlambert]

Very fussy people on here, everything they’ve done is good, nothing last forever, and if everyone is so color phobic buy black! Seriously…

[@donbullock-techihound]

@ I also have my original Wireless Go that’s working great. I still think that replaceable batteries would be better than what they offer now. Just my opinion.

[@ApolloTheOriginalPodcast]

I'm using Rode wireless mics and PodMics for my podcast for years now. Amazing products and the best part - its great price. I just plug my PodMic w/ USB-C to my Mac and hit RECORD. That's it. No pre-amps or other devices needed. Love it.

[@Mikey_Perth]

Good job! Making Australia Proud 👏

[@aleharder]

I would love to see timecode syncing between two or more Wireless Pro's instead of more color options...

[@marsgizmo]

yup, I'm waiting for this as well 🙌

[@CNCTurboStep]

@@marsgizmo Just syncing one or more devices properly to a phone would be enough for me. The 1-2 second difference is simply not necessary.

[@RandumbTech]

Ryan teased us about a year ago with the ability to jam sync our Rode Wireless Pro. We’re still waiting…😢

[@parkviewphotography7529]

I doubt they will do that. I saw that video a while back. It would be awesome if the batteries could be replaced and if you could jam-sync it with other timecode devices. I swear - once Deity gets the “go ahead” to have their Theos US systems record and transmit at the same time - I know where I’m spending my extra money! 💰

[@TheTechnoPilot]

It’s extremely frustrating because the timecode is effectively completely useless until it supports this function plus stereo output on TRRS plus separate timecode over USB to analog.

[@JobOthoniel]

Thank you, i bee using Rode while a ago, in fact im still using a wireless go ii, i would love to test the go (gen3) how i can get on hold on the right department?

[@rodemic]

Feel free to submit your proposal through by filling out the contact form here! help.rode.com/hc/en-us/requests/new

[@EynsomniacsStudios]

2 days back I posted a video on Wireless Go II is still the best wireless mic till date. Now you just launched the Gen 3 it will be a game changer 😃

[@Tonellacam]

They also released the PRO in between

[@JoeCastellon]

The fact that the talent introducing the microphone is not wearing the microphone speaks volumes. This mic is too big now that we have the Lark M2 and the DJI Mini. I'm afraid Rode is now playing catch-up.

[@missoya]

Different target audience. Similar colourful iMacs. This product is not for everyone to like. Most importantly we have options. Some people live for the colour. Let them have something to get excited about.

[@BlindOpticEnt]

My thoughts exactly

[@DanielLangeYT]

She is wearing the mic, but a lavlier connected to it

[@JoeCastellon]

@@DanielLangeYT yet we only see the wired lav mic. How do we even know she's not using another mic? But that's beside the point. The point of the video is to showcase their new colorful mic, she should have worn it on this video. The decision behind her not using it is what tells me Rode is not 100% confident in this new product. And to further prove my point, you don't even see someone wearing the mic up until 2:25 seconds into the video.

[@DanielLangeYT]

@@JoeCastellon because a lavalier will always be more tasteful than a clip on mic - regardless of brand

[@AnastasTarpanov]

Rode strikes again. Great functionality in the GO series. With that said I want to see a mat black version with a black logo or better without logo, even with option to turn off the lights of the transmitter. The color options are great for bloggers and young KZbinrs but for serious work we need something more discreet.

[@AmazeStudios]

I'm not getting any new mics until they properly implement Timecode. Ideally I would love the Atomos UltraSync BLUE Wireless, but it should support jam sync like Tentacle sync and Deity mics.

[@ivan_novakov]

Now I'm really looking forward to the Videomic NTG gun with recording to itself and 32 bits from float

[@YTMrB]

So this is the wireless pro minus timecode basically?

[@rodemic]

They do share many features! The primary difference is that the Wireless PRO also features timecode and comes with a complete accessory kit, including two lavalier microphones, a charging case and more 😊

[@TheTechnoPilot]

@@rodemicwe need to see the timecode functional issues of the Pro addressed ASAP then if you want to say this is a difference. Proper full jamming functionality along with simultaneous timecode and individual channel output from the receiver is a MUST if you want it to be a usable feature.

[@CNCTurboStep]

@@rodemic Timecode only works (effectively) if you can sync the Wireless Pro timecode to an external source. They won't even sync accurately to a phone. This is not difficult. Please get this fixed.

[@Chips-Lab]

Was waiting for the pro, but it makes sense that they prioritize some social media market. What’s next for pro ? Better WiFi, more TX input in the receiver, better sound, no logo :) ? You also must keep up with DJI cold shoe camera connection

[@TheTechnoPilot]

Honestly I’d love to see a Rode Pro Quad receiver with bag compatible vertical screen and buttons/dials.

[@moorememoriesvideo7070]

Love this option to add to my pro kit. I want white, so that’s perfect. Huge disappointment you don’t sell the transmitters separately, but I get it, you wouldn’t make as much money that way. All of that said, when will these colors be available? I heard they will not be available for purchase at other retailers, only directly through Rode. Very interesting choice, why is that?

[@buddyfx7026]

Caleb Pike inspiration with that headphone amplifier, very nice!

[@IvanRAkbar]

Still no dedicated TRS monitoring port when using it to camera? Why?

[@righthererightnowproductio9525]

Yes...@Rode...This is really, really, really, really, really, really a pain, esp when using timecode.

[@brycethmcnabb]

I think it’s time to upgrade from my road wireless go GEN 1 to the new GEN3. The orange color way looks epic.

[@jordiblanchcosta]

Good product Rode, well done

[@HayamaHiroshi]

Rode, I really want to know besides from the accessories and the time code function , what’s the difference between it and the pro ones?

[@JJohnson313]

This one appears to be better. Just doesn’t have time code. Gen 3 is superior. By far.

[@TheTechnoPilot]

@@JJohnson313🤣 I didn’t see one aspect that was superior to the Pro, please tell us what you saw that was. This just seems to bring the Go line to parody beyond timecode and accessories included.

[@illuminantproductions1748]

Good job RODE 👏🏽 continue to list to the customers and you'll continue to thrive! Question: will there be a feature update down the rode with these version that i can add an extra transmitter(s)🤔 I feel this and timecode are the last things to tackle to make a perfect package BUT all of what you all accomplished isnt a deal breaker💪🏾

[@rodemic]

We'll pass your suggestion regarding extra transmitters on to our development team for their awareness! With regards to timecode, the Wireless PRO might be worth checking out 😏

[@illuminantproductions1748]

@rodemic As usual, the company is awesome! Thank you for getting back to me and the information 💪🏾

[@fohx]

Colours look great!

Soooo my PRO is now GO 😅 which is cool and expected more new functions on PRO soon.

[@unboxlkcn]

This is the microphone I’ve been wishing for in 2025. Thank you, Rode, for continuously creating quality microphones for content creators. I’m still using the Go II and couldn’t be happier with it.

[@ahmadrandhawa291]

Why i am not seeing the speaker wearing the Rode Go Wireless, when she is advertising about the wireless go?

[@northtimo666]

She has a lavalier mic that is probably connected to a Rode Wireless GO transmitter.

[@masterinico]

Pro’s use lav mics always

[@ritrattoaziendale]

She doesn't wear it because it's too big and glossy to be worn lol ahah

[@eyrichecortez4300]

I bought the Rode Me instead of the GOii because of gain assist. Good to see that Goiii has gain assist too

[@JamieWhitehorn]

What the difference between this and the wireless Pro given that this one is £275 and the Pro is £295 and comes with way more extras?

[@davidwashington4282]

Any update with the Wireless Pros ? You said in your video a year ago that you would add jam sync and nothing since.

[@NailujProducciones]

Can you start internal recording on the transmiters from distant both at once? or you have to go to each on of the transmiters to start and stop recording?

[@rodemic]

You can assign the button on the receiver to function as a 'recording' button to activate them remotely!

[@snappycattimesten]

Clearly I am not the target market. Why highlight the highly reflective glossy light reflecting?

[@CallMeRabbitzUSVI]

Vinyl is your friend, they sell it at dollar tree in all colors and textures. Don't let one glosssy surface stop you from enjoying a good product

[@CNCTurboStep]

@@CallMeRabbitzUSVI I've tried every form of sticky tape and vinyl I can lay my hands on and nothing sticks to the glossy surface. Overlapping on the sides is possible, but difficult if you still want to store them in the case.

[@pindopurba]

After all the previous innovations, why settle for colors?. at this time i was expecting something like phantom power features to use with condensers or something better. This is something like the jaguar ad.

[@MartinKarel]

Is the bug with low USB-C volume on iPhones finally fixed? The GO IIs are way too quiet.

[@rodemic]

Sorry to hear about your low input volume! Please contact our Support Team and they will be able to look into this for you - help.rode.com/hc/en-us/requests/new

[@StefanGenov7]

I definitely need to try it!

[@Dangeruss]

This looks cool. Not gonna lie at first, I thought Heen the lady presenting was AI.🤣

[@rodemic]

What can we say, Heen just has perfect delivery 🤷‍♂️

[@MauriceBurke]

I still think she's AI

[@XiaofanTech]

I also think it's AI.

[@Dangeruss]

@@rodemic For real she's so put together she looks and sounds too perfect to be human 🤣

[@bokbokeh]

Been thinking the same since the first rode wireless go ad, she's too perfect!

[@PuthethuKollam]

Why Rode isn’t allowing the user to replace the battery when it’s dead? It’s just greed!

[@WupperVideo]

Without a Sony MI shoe integration, it’s still years behind the DJI Mic 2.

[@DesoloZantas]

soooooo does it work like Elgato's ClipGuard technology yet?

[@jbsworkshop]

Is there an update coming for the wireless pro? @rode

[@colinwatt00]

Please update Rode Central for iOS/iPad OS so we can actually change settings. Thank you. :)

[@rodemic]

You should definitely be able to see the kit on Central iOS! If you are experiencing any issues, please contact support - help.rode.com/hc/en-us/requests/new

[@madknac2978]

Is there any difference between the actual receivers and transmitters of the Wireless PRO and the Wireless 3? I understand the packages are difference, but what about the devices themselves? I'm looking to buy!

[@rodemic]

They do share some similarities! If you require the additional accessories and timecode functionality that the Wireless PRO provides, then that would be your best bet 😊

[@EnricoColacillo]

My intention is not to be confrontational, but I can hear your audio, see (if I’m not mistaken) the Lavalier II (which I also own), and the result is completely different from what I achieve. Your audio is clear, natural, as if the microphone were in front of your mouth rather than on your neck, and without any reverb. While I understand that you might have an acoustically treated studio, I believe the audio is somehow processed. The raw file I can produce is far from reaching this level, even when recorded in 32-bit float. Do you have any suggestions? What kind of work do you do on the sound to achieve this result? Any help also from the community? Thank you so much, and compliments on your products!

[@rodemic]

Hey Enrico, our support team will be more than happy to assist you with your setup in achieving the best possible sound! You can reach out to them through here - help.rode.com/hc/en-us/requests/new

[@madknac2978]

Also, can the receivers be used as standalone recorders? And can you use 2 and 3, and Pro interchangeably?

[@rodemic]

The receivers do not have internal recording, but the transmitters do! You can sync the Wireless GO II, Gen 3, ME and PRO with each other (2 transmitters per receiver), as they are all Series IV systems 😊

[@Michael-Elo]

So whats the reason to buy the pro now? Unless they make a big update to it to set them apart.

[@VulcanworxSG]

Would love to see a Lark M2 like w no logo

[@davidp158]

Many people, myself included, have asked for the Wireless Go to lose the BIG logo and glossy surface. It is distracting if the unit appears in an interview. Now we have these silly colors to make the unit even more distracting. Why not offer a “stealth blackout” version of these?

[@melikewatchstuff]

Agreed

[@B-Moye]

How else will they get free advertising on set/in videos?

[@JoeCastellon]

Also, notice how the talent introducing the microphone is NOT WEARING THE MICROPHONE?! 🤦🏻‍♂ Hard pass when the DJI Mini is very comparable and super small.

[@missoya]

Why not use a lav mic to eradicate these problems? Seems to be small enough to go unnoticed.

[@melikewatchstuff]

@@missoya often in run and gun interviews/vox pops you just need to clip the the transmitter on somewhere like a pocket and you want it to be discreet. But tha shiny rode logo catches theoght and becomes very obvious. It needs to be matt black

[@marvinprost5691]

Hi Rode Connected by usb, is there an audio play through from the pc or iOS device while monitoring via headphones?

[@rodemic]

The Wireless GO (Gen 3) is an input only device so you won't be able to send an output through the receiver

[@TheOneMuslim]

Wow rode you never disappoint! I wonder what’s to come early 2025 now 😂

[@husratmehmood2629]

when should we expect Rode Wireless pro upgrade??

[@mazivco]

I want a wireless mic to connect to the ipad looper app and record myself playing guitar, is it the right choise?

[@rodemic]

As long as the app is able to use external microphones, the Wireless GO (Gen 3) should work just fine!

[@Ibrahim_usman]

Can i turn off all the lights? There sre 3 now

[@padraigtreanor]

Does the Wireless Go II charhe case work with these new ones??

[@rodemic]

It does not

[@dezfyah]

No noise canceling feature?

[@DokoGaTV]

So longer range and colors. Was hoping for a smaller form factor on the transmitters, or something else. Still happy with the Rode Wirelsss GO II and DJI Mic 2. Hoping someone can continue with what DJI has with the hot shoe camera connection, 4 channel/4 transmitters, etc etc. Love the Rode Interview Pro mic. Cheers.

[@rodemic]

Thank you for your feedback! We'll be sure to pass this along to our team 🙌

[@DokoGaTV]

@@rodemic Many thanks!

[@screensanctum]

love my WG II, not in the market for an upgrade yet. I never use onboard recording because it defaults to -20db. It's hard to mix this to -6 in final cut pro. Does anyone actually use the onboard recording? I have it set to float.

[@gaips]

Whoa! Røde are you using chroma keying for those backgrounds? If yes, whoa that is very clean chroma-keying.

[@rodemic]

A magician never tells 🤐

[@gaips]

@@rodemic you should because this is exactly what many people are looking forward to with the Rødecaster Video 😉 chroma keying.

[@alexgaipo]

@@rodemic❤

[@Фанеркин]

Please add the ability to make unique file names when recording. I have 4 (Wireless GO 2) microphones and it often happens that the file names are the same and this creates a lot of problems. for example MIC-1 rec001, MIC-2 rec001, MIC-3rec001 The ability to enable recording from the receiver is also very necessary; this is an obvious function and not difficult to add. At the moment, you have to manually start recording on each transmitter, which makes it very difficult to use when the transmitter is hidden under clothing.

[@MeetupvideoUK]

yep, we need this!

[@masterinico]

Yes this is one option all the pros would love. I use folders to keep all my files separate though

[@JJohnson313]

This video covers the ability to enable recordings from the device. A new button and light indicator have been added for this purpose.

[@masterinico]

@@Фанеркин you can also set the WG2 and Pro to always record meaning as soon as it’s turned on it starts recording. While this adds some time editing I prefer this method

[@Фанеркин]

@@masterinico I know about this, but the file size will be large and with this method (if I’m not mistaken) we lose the ability to record in 32 bits

[@rowanstrang8072]

Are the transmitters available for sale as standalone units?

[@rodemic]

Not at this stage

[@TheNorang]

Hey Rode, can you please make it easier to replace battery in these products when the time comes where you eventually have to swap the batteries out of these product in 5~10 years?

[@rodemic]

We're working on a solution! You can read more here. rode.com/en/microphones/wireless/wireless-go-gen-3

[@NiceGuyEntrepreneurs]

I think it would have been cool to see her clearly wearing one as she recorded the video.

[@ritrattoaziendale]

Nah, it's too big and glossy tp wear, they know it too, so the talent doesn't wear it

[@TerenceKearns]

Impressive ❤

[@FreeTimeMastermind]

I purchased a pair of wireless earbuds that sends the audio to my iPhone via bluetooth for $20. Can someone explain why neither the GO models, or their competitors, can do this?

[@cakeojames4204]

You guys are smashing it lately! Same question as before: does this connect wirelessly to the Rodecaster Pro 2? Also, as a side note, I received a 20% discount for purchasing a new PodMic and registering it. I wanted to use the discount to get a Rodecaster Video, but it doesn’t seem to be on your website? Is this possible? I’d really appreciate a reply. And if it isn’t, can you make it happen? (lol)

[@rodemic]

It does connect to the RØDECaster Pro II! The RØDECaster Video is not available on our brand store at this stage, but feel free to check in regular for the most immediate updates on stock 🙌

[@cakeojames4204]

@rodemic thanks super appreciate the reply 🫡

[@zenrayx1342]

How about a Rode VideoMIc NTG with onboard 32 bit float?

[@IExist.Q86]

This is wirless pro update version?

[@rodemic]

This is a new version of the Wireless GO! 😊

[@miguellloydinc]

Will the existing charging cases work with these new ones?

[@rodemic]

The Wireless GO II Charge Case is not compatible with the Wireless GO (Gen 3) kit.

[@DrKlausReichert]

doe they work with Rode Connect?

[@edisonfoo3704]

Being a long time supporter, having both the Gen 1 & 2, now please help me figure out if I should go with the Pro or the Gen 3 🙏

[@rodemic]

If you need the additional accessories and timecode, the Wireless PRO would be best suited for you!

[@edisonfoo3704]

@ okay, now I am excited about the Gen 3. Hope it will be available in 🇸🇬 soon!

[@marcusbonham]

@@edisonfoo3704 the lavaliers that come with the Pro its just a must have, also the charging case

[@jeffrey3205]

Is there any latency when using the headphones and is the quality any good?

[@rodemic]

There will be a very minimal latency like every wireless signal, but won't be noticeable at all. The quality is amazing!

[@andreichecko]

Specs are good, does it work with streamer x ?

[@rodemic]

It does!

[@andreichecko]

@@rodemic cool!

[@AnnexF]

Wow! I want it!

[@misterpogiako]

The improvements Rode did here is like the "improvements" Sony did with the A1 mk2.

[@AgunkPerkasa]

Can it push the record button from the receiver ??

[@rodemic]

Correct - you can press the Ø button on the receiver to activate the onboard recording on the TXs!

[@speakerscoach9087]

Colors are Cool :)

[@JOBT0]

00:27 Next step, wireless flying lens.

[@SGAndyAng]

Hmm, looks more like a WirelessPROII replacement. Can't wait for the WirelessPROIII. ;-)

[@thomaslambright]

Nice! What is the price?

[@rodemic]

The Wireless GO (Gen 3) is $299USD!

[@coffeehigh420]

nice job with the colors ... you guys got a cue from Apple ? ;) I know what you ppl are up to !

[@rezjrprod]

She's pleasant 😉 I love my wireless pros

[@mmartinsrj]

Awesome!

[@tonytaormina4759]

Big miss here having her introduce it with a lav mic

[@anishnvacufore]

Why she is not using the latest one - Wireless GO (Gen 3)????

[@northtimo666]

Probably is, but she has a lav mic while using it.

[@mex5341]

great deal !

[@PackingLess]

Ill take a set of red one please :)

[@KallusGarnet]

This upgrade was needed but: Receiver needed 2 outputs Longer range Timecode Bluetooth app control

[@rodemic]

Thanks Kallus! We will pass your suggestion on to our development team for their awareness 🙌

[@isaacproductions]

Let’s go 🙌🔥

[@sdmoel1]

Now if they could only make the transmitter clip on half the size, and in matte black...to help hide and conceal.

[@ThrrmaKongLok]

ราคาในประเทศจะเท่าไรเน้อ

[@rodemic]

The MSRP is 299USD 😊

[@LifeOnTech]

Rode does it again. Amazing features

[@mariuszsobolewski6713]

Still missing a user replaceable battery.

[@AdamTahere]

LETSS GOOO!

[@utooboobnoob]

What does this mean?

[@VaraprasadVaramShorts]

What is the price

[@rodemic]

299USD!

[@PiecesofVinyl]

with this basically becoming the Rode Pro - my guess is they will be putting a new Rode Pro out? Seriously what is the difference at this point? Locking connector - Gain assist - 32bit float - charging case - am I missing something? What is PRO about the PRO now?

[@rodemic]

The Wireless PRO will come with timecode functionality as well as a vast range of accessories 😊

[@uldmedia]

For 20 $ more i become the pro with timecode, charging case and 2 great lav mics - why should I buy the Go 3? The only thing I can imagine is that there will soon be an improved but more expensive Pro version to replace the old one. This could make the old Pro a good bargain and alternative to the new Go 3 while it is still available.

[@CNCTurboStep]

@@rodemic The Wireless PRO 'WILL' come?? Are you hinting about a new product? What about fixing timecode sync from external sources, at least with accurate sync from a phone, on the current Pro version first?

[@HungryForHeaven5]

Interesting that she is not using those mics in the video

[@rodemic]

How do you know it's not connected to that lav? 😏

[@jorgenudvang3507]

Had the Go II. Nice piece of kit, but the receiver stopped working after little over 2 years. Wasted hours trying to figure it out with some online Røde guy. Single pieces apparently not available for sales. Now I have 3 pieces of expensive plastic junk in my drawer. Nope, not buying another set.

[@guiadepaseo]

Hola, yo quiero el color naranja 😍