When you rattle can, try this.

Veil Design Co Rattle Can Stencil Pack is perfect for painting your gear, with high quality. The stencil pack is a non-permanent, adhesive-backed vinyl stencil kit. These kits are cut on 12x12 sheets of vinyl and come with both the negative and positive sheets. Achieve the rattle can design you want with ease with our tiered sheet system.
Woodland and Tiger Stripe Patterns come with two 12x12 sheets, all others come with 3 12x12 sheets.
Social Media and Support
[Wise Men Company website](www.wisemencomp...)
[Instagram: @wise_men_company]( / wise_men_company )
[Facebook: @wisemencompany]( / wisemencompany )
[Support us monthly](ko-fi.com/wisem...)
Monthly support gets access to our Discord Channel and more.

[@CertifiedSunset]

A piece of general advice when using rattle cans, hold the can 12-18 inches away from the piece you are painting, this will help avoid the paint pooling and help give you a more even paintjob. It also helps to do brief strafing passes with the paint instead of doing it piece by piece. For "texturing" I like to use the soft side of a dish sponge and dab it in some paint (not a lot of paint) then apply it to the rifle, but you can use many objects to get cool patterns.

[@georgekirby3361]

Pro tip, if you have a wife who is in to that cricketing cult. You can have her make stencils like these. It’s a win win because it keeps her busy and entertained for a day.

[@FoxBonly]

BWAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

[@tsoliot5913]

Cricketing cult?

[@stoots1000]

​@@tsoliot5913 cricut...its a vinyl cutter. You can make decals, etc.. Bought one for stencilsm.ise it for everything now

[@GuacIsExtra99]

This is genius, it’s bad enough I’ve been sneaking new guns into my safe lol

[@greenthumbhippie5434]

😂😂😂

[@matthewconnor5483]

All the hater moaning about not painting their safe queens😂

[@wisemencompany]

I knew it was coming.

[@TUKByV]

Their tantrums are hilarious.

[@rustythefoxcoon5143]

Some I’d paint others no. Depends if I want style or camo.

[@will6334]

Best camo paint job I've seen was done with dawn dish soap

[@stonewallsquad3343]

I recommend Rust-oleum's camo line, I've tested it under IR and it is IRR compliant.

[@baredog6774]

Yes! That's what I used and mine turned out great.

[@hansblitz7770]

The traffic cone was smart AF. Call it a "tactical painting stand" make it FDE and charge $129.99. How much is your life worth brosef?

[@sikknastyy3907]

Honestly wasn’t sure how this would come out at first but that is actually a pretty damn good looking paint job.

[@fairlylocal607]

Swamp-tarn

[@lunarconcepts9958]

"I'm not the most patient person..." Me thinking it before you even admitted it 😉

[@wisemencompany]

Everyone calm down. I’m self aware of my current situation.

[@lens7859]

I just got some plastic stencils on Amazon and held it over the firearm and it was so easy and I am so pleased with the way it came out. People thought I bought the gun that way. No need to apply stickers

[@ordinary_american]

That came out great. The effort definitely paid off. I'm sticking with Gear Aid Camo wrap for now, but I'm gonna hop on the paint train eventually.

[@wisemencompany]

Hop on the train anytime. It’s a fun ride.

[@saylorj6810]

I like to spray a base coat, let it dry, and then put sticky tack on top of the first layer, spray a different color, let it dry, and then repeat the process as you go along. I then top it all off with sponge blotching. It turns out pretty well. It also helps to start your base layer from a lighter tan and then make accents in darker tones.

[@BandAid350z]

Stencils are great and easy, depending on the pattern you choose. For a quick “field expedient” way, I like to put a base of a few light colors then use 550 cord and wrap the rifle with mesh bag (onion/avocado/laundry bag). Then spray my darks. The cordage looks like sticks or blades of grass when removed. DON’T FOR GET TO COVER OPTICS/LIGHT LENSES.

[@dustinpribble1546]

This is much better than the last company I saw selling these.... They wanted like +$40 and up for a couple 12x12 sheets while depending on the pattern u choose there r $15 for 2-3 sheets

[@paultoth7853]

Want some different shapes? Buy some jigsaw puzzles.

[@dustinpribble1546]

@paultoth7853 what are u talking about? Jigsaw isn't a very good camo

[@paultoth7853]

@dustinpribble1546 if done correctly in size and shape i see no difference than what is here or Multicam. When I paint a rifle I go for an A TACs look. No defined edges. All colors just blend into the next color.

[@alabamatrout6985]

I paint all my rifles. Looks good. The vinyl stickers will definitely make things easier for my next spray! Last time I made them myself out of painters tape, that sucks to do…

[@wisemencompany]

Yes painters tape is time consuming.

[@BillyBOB-sm3rl]

I like the color choices. The pattern is very stencil. It does look good

[@sethperry1323]

I thought that was going took terrible! But that is probably the best rattle can job i have seen ! Nice!

[@robsim4692]

I always paint my guns upside down so that when i hang in trees by my knees upside down my gun camo is right side up!

[@EuropaChronicles]

Honestly the cone hack is the best part of this video. Lol The stickers are pretty sweet too.

[@wisemencompany]

Sometimes you just have to get creative with the resources you have.

[@curtisthornsberry4236]

Not sure if I'd use the stickers, but I love the results of the bag.

[@LILMIKEOG]

Just painted my rifle a couple days ago... I wish this popped up in my feed sooner lmao

[@smokingcrab2290]

Use dish soap. That makes excellent tiger stripes

[@JJM69.]

Those stickers seems awesome I got to try those out

[@johnsullivan3601]

Great video, love the minimalist approach.

[@chuckcribbs3398]

That’s amazing!!! What a great idea.

[@jcamalier]

I found it looks better with a base coat of matte black. It blends better with the other paint, better than the aluminum black. Also tweezers to take of the stickers

[@wisemencompany]

Solid advice.

[@threat2demoracy5454]

Cloud Defensive! Great company! 👍🏻🤙🏼🇺🇸

[@3gunshooter60]

Actually, camo is science. 😮

[@FreedomStencils]

Nicely done!

[@misternitro1]

You've inspired me to paint Michaelangelo's "Creation of Adam" like the roof of the Sistine Chapel on this passed out lot lizard outside this here Buc-ee's.

[@wisemencompany]

In 200 years when they find your work they will put it in a museum.

[@robbomber984]

Multi layers with dif pattern masking i did a pellet gun to test turned out great however vynyl wraped my 10 22 happy with it and easy to change later,just my input.

[@philgraves7814]

2:28 I’ve seen homeless guys wrap up bodies better than that

[@jimmiesrustled1359]

Great video. Cool product. I still love my laundry basket netting pattern lol

[@bassmonster420]

Awesome job ! Really cool look

[@TheElPescador]

Cool

[@lukelacross190]

Freedom Stencils is also a great source for stencils, I’m gonna check out veil design though now.

[@diyjeff1838]

Aero lower. Very nice!!

[@kyelhogwarts8175]

Like the net bag stencil , thanks for the I fo

[@joquin4618]

Like these Bob Ross AR15 episodes 😊

[@wisemencompany]

You’re too kind.

[@hav1byte]

sure a lot of paint??? looks good

[@X9Unsponsored]

Laundry bag is king. This is kind cool though.

[@wisemencompany]

Laundry bag is typically by go to and even on this build I couldn’t resist using it a little.

[@X9Unsponsored]

@@wisemencompany love it.

[@RuBearUSA]

looks pretty cool

[@ChristianGrest]

Nice! You should try out some Brownells Aluma-Hyde.... definitely more durable than regular spray paint. Ben using is for some ciao jobs a few years now.

[@sscustomcaraudio]

“You don’t even have to be good at painting” 😅 tell that to Reno may.

[@OuterHeavenTactical]

Wow I would've never thought that you could use vinyl camo stickers like they do for cerakote! Crazy! I thought those stickers were only compatible with cerakote only! I heard they had warning labels on the package that said "WARNING! DO NOT USE SPRAY PAINT WITH VINYL STENCILS AS THIS CAN CAUSE MASS SHOOTINGS AND MAY CAUSE MORE HARM THEN CAMOUFLAGE "

[@irregularrex4004]

Looks like an early unlock COD camo.

[@stephanarizona9094]

Wasn't sure how it was going to turn out but the finish design was pretty cool.

[@wisemencompany]

Yeah I dig it too. Something different.

[@greybeard277]

That came out pretty good. Definitely a step up from the basic mottled brown and green many rattle can jobs end up as.

[@eliinthewolverinestate6729]

I use an orange bag netting. I tap nothing off anymore. Zero F's given. I do use a brush or sponge on area's the paint always comes off at. Wood stove paint works good for muzzle devices.

[@sirdanoman]

I did my AeroPrecision AR10 build in Rhodesian camo pattern from Freedom Stencils using Duracoat Badass. It turned out sweeeeet. Was super patient, dried with blower dryer between coats. Has stood up to heavy abuse over 2 long elk hunting expeditions

[@4deuce31]

The thumbnail looked better

[@rickyshultz2051]

Cosmetic blend ! We call it honest wear .

[@OKBushcraft]

I was a little skeptical at 1st but it came out great

[@TexasPapa13]

Those shorts are awesome. Just painted my AR47 jungle tiger stripe

[@zoolook888]

Looks bit like German Flecktarn camo.....really nice job, love it!

[@MrKingArthurhk]

Well, butt sauce.

[@TheMiraldi]

Just a little tip, ALWAYS HAVE EITHER AN OLD MAG OR TAPE OVER YOUR MAGWELL!!!! The bottom of your BCG is exposed and getting paint on there is not advised!

[@kyleschutz1235]

It should have enough oil that the paint wouldn't stick.. but don't be a Homer and spray right up the magwell and it's fine

[@l337l0gan]

My last couple rifles have been painted using stencils. I won't say the company's name. I'll be using viel from here on out.

[@theheatinferno8420]

Cool. I'm about to paint my gun, and I have similar colors, one dark green and one light, some grey and brown. To blend in with the grass and rocks here in Tennessee. I might have to get some of those stickers

[@wisemencompany]

Great $15 investment.

[@ordinary_american]

Mom, can we have flecktarn? Mom: But we already have flecktarn. Flecktarn at home: jk it came out 🔥🔥🔥

[@wisemencompany]

Bahahaha! Good comment.

[@robertplank6284]

Has a Viet Nam tiger camo feel

[@kingfallen]

sponges

[@sr25jd]

Very Wicked 😂

[@codycat91]

Geez literally everything on your buddy's website is sold out. Do you happen to know what's up? Or anywhere else I can get multicam stencils?

[@paultoth7853]

Has anyone seen A TACs camo? There are no distict borders between colors. Imagine woodland or multicam out of focus or blurry. That is what I go for. Works amazingly well.

[@wildcat8598]

You were a good advertisement for that company cause they are sold out of everything in their site lol

[@brian1110]

Their shit is still showing sold out as of today!!

[@rouchenelvann]

Damn company has been sold out since this video dropped 🤦🏾‍♂️ Any recommendation for a different company with quality stickers?

[@panasonicsamsung5867]

Well I think with a home made stencil and some netting and some real foliage over a sprayed brownish grey background one would be faster and have a much better concealment than with these small stickers which are imo much more time consuming….

[@5jjt]

Does painting a AR plummet it's retail value?

[@wisemencompany]

I guess that depends on the buyer.

[@Reblwitoutacause]

@@wisemencompany and the paint job 😂

[@rager_fox8147]

Does the paint make the rifle feel sticky? I would love to paint mine, but I'm afraid that the paint will feel sticky 😕

[@MrShtbrick]

I'm not into rattlecanned guns, but the color scheme is awesome.

[@wisemencompany]

I appreciate that you can appreciate.

[@RazorBrain1]

I personally would put a base coat down first and let it get good and cured. Then maybe use the stickers. Black is very rare in nature. You could even use a primer as the base. Make sure to use brake cleaner or some kind of degreaser before painting.

[@gunsncars1157]

I love Montana gold spray paint for rifles and their varnish protects the paint well too, I did mine in their sand to imitate hk RAL8000

[@JordanJJereb]

Putting the stencils on before the base coat is even applied /: Lol wut

[@5jjt]

Can your friend make custom stenciling such as, alphanumeric characters?

[@wisemencompany]

Probably

[@gringoinflorida]

What about cleaning it before you paint? Never done this, and I'm looking to do it real soon,thanks

[@ratagris21]

Nice finish. You can dust it with another color to get it to blend some of the hard edges.

[@davemac2505]

Im gonna disagree with not painting the whole thing with a base layer first. Even though it doesnt look it the base black ceracote does have a slight shimmer, shine, or reflectiveness to it. Thats why i personally would paint it with a good non reflective coat and then stack the camo patterns on top of it. Just my two cents lol

[@MunitionsDudTester]

I'm adding this as one of my favorite ways to paint a rifle, but the top method for me is still to do a base coat and then mask off for striping of another color and then coming back in and applying the matte paint with a sponge in layers for an extremely uneven almost digital effect. Most effective way I've seen so far of breaking up the silhouette of the rifle other than covering it in scrim.

[@Retro-Moon25]

Looks good I'd like to do my Mossberg 590 someday!

[@wisemencompany]

Doooo it!

[@gatormcklusky5850]

yeah everybody uses a certain color & make for a reason That stuff you putting on is gonna shine like a beacon under IR

[@Paiseandplay]

What's that cover you had over the foreguard

[@wisemencompany]

Hot Pocket. Sold on our website.

[@Paiseandplay]

@wisemencompany now I'm forsure buying it since it's called Hot Pocket

[@maverickmartinez7776]

nice intro ben !

[@cotyyandell3799]

Bro, you absolutely soaked that thing with paint way way way too heavy

[@joebobrednek0072]

Is the Veil company still in business? Entire catalog is sold out.

[@joebledea]

Looks amazing, thanks for the tutorial!

[@ZombiePanda1776]

BriNg uS a sHrUbBerY!

[@kevinedwards7206]

Ni!😂😂😂😂😂

[@CarlPapa88]

No herring?

[@FT4Freedom]

I just use duct tape in different colors. Easy to remove. Gives me option to go back to stock. All you really need is to break up the pattern of the rifle.

[@pim1234]

Your forward bolt assist is missing the knob ...

[@Bigredkarl]

Paint darker on bottom and lighter shades on top

[@bobbyfresher762]

I appreciate the effort but holy shit that color combo is awful.

[@GodGunsGills]

Only thing I'll complain about is painting too close. Should be about 8 inches away

[@hansonprofile]

Reminds me of the scooby doo swamp creature

[@notyoaveragejosay1577]

Gun art nice 🧐🧐🧐🧐🤌🤌🤌🤌

[@timf3506]

Can't find that can of goblin green. Brand?

[@curgunner]

Way higher effort than when I spray my guns lol. Nice Rein in the back btw

[@wisemencompany]

Appreciate it.

[@RedNeckSurgeyTech]

I forgot to put the magazine back in, but whatever, A little sticky spray paint inside with the guns critical moving parts wont hurt anything.

[@wisemencompany]

Still not an issue.

[@godspoptart2644]

Looks like you’re wearing a woobie 😂

[@jdub2469er]

A wise man would would mask the mag well.

[@robertnewman4854]

Goblin green? Pretty sure that's the same color i used on scale miniature bases years ago!

[@wisemencompany]

Yeah who comes up with these names ?🤷🏻‍♂️

[@sixoffive]

I got camo duct tape