DIY CAMO WITH DISH SOAP AND SPRAY PAINT! HOW TO SPRAY PAINT YOUR GUN, AIRSOFT, OR PAINTBALL GUN.

Simple how to achieve the above effect. looks like a blend between multicam and m81 woodland to me. What do you think?
Please subscribe!
I make few cents if you buy something with the links below, and I appreciate it!!
3KOG merch!
3kogdesigns.co...
spray paint: amzn.to/3FimAgI
dish soap: amzn.to/3vAnbXN
optic (scope):
upper/LPK(EPT): alnk.to/4XqZl9r

[@Zermattquattro]

By far the best home-rattle can paint job on KZbin. The dish soap method gives very good results combined with a conservative approach to laying paint on. In turn Coupled with the fact that your colour choice was as good as it gets. it has a nice high end finish too it. I’d be proud of the end result. 👍

[@3KindsOfGuns]

Thank you!!!

[@billfleming1978]

@@3KindsOfGuns How well does the paint stay on long term?

[@Skipro]

I have had it turn out pretty well but your method is so awesome I’d be outside doing it if there wasn’t a ft of snow out there can’t wait until it warms up your paint job really turned out so awesome!!

[@3KindsOfGuns]

Lasts well because I baked it on.

[@bandnmajors1465]

Bro, that is probably the sickest back yard paint job I have seen. Very ballzie, but damn the final product looks legit AF. Well done.

[@3KindsOfGuns]

Thanks! I will be doing my 12 gauge AK soon!

[@rohawaha]

I paint a lot of rifles , interesting concept using the dish soap like a "liquid stencil " , most people don't realize that for good camo effect, that the different colors must break all the edges of the rifle to break the outline or silhouette. The dish soap does a great job of breaking the edges by flowing over them. I do exact matches of military camo's tiger stripe , marpat , multicam etc. Another quick concept I have used is Sea Sponge Camo ! You just paint a base coat and then use pieces of cut sea sponge to dob on different colors of paint, each cut of the sea sponge gives a slightly different pattern for each color . Be sure to blot the sea sponge on something between dipping it in the paint and transferring it to the rifle so no paint runs. It's a great method for getting the colors and pattern exactly where you want them. WARNING ! Painting camo is addictive " none of my rifles are black anymore " and all my shooting buddies are jealous .

[@3KindsOfGuns]

I need to try the sea sponge method! Video to follow!

[@nigelcrete3901]

Addicting for sure. Not to mention fun.

[@harrykuheim6107]

I painted all 17 of my BB Guns....all different...One custom for my Daughter...she picked 3 colors, Pink, Purple, and Gold...I don't think you can go wrong

[@supersportimpalass]

Try sea sponge soap. Same method/concept as this but different result.

[@rohawaha]

Are you pulling my leg ,L.O.L !

[@cassivellaunushonestus4927]

I'm saving this one

[@ricardocarmona5210]

I've been studying videos. On painting my AR 9mm this is the best one yet. Thanks ✌

[@3KindsOfGuns]

Thanks!

[@richardschafer7858]

Been rattle canning my rifles for years, and I'm pretty good at it. Never seen this technique before. Very slick and I'm impressed. I freely admit I will be doing this next time. 😆

[@3KindsOfGuns]

I was very impressed with the results as well, that was my first time!

[@victorglaviano]

If you have worked in a body shop, I've seen Dawn used before, spread out on windshields and body panel to prevent overspray from sticking, then run it through the wash station after curing.

[@3KindsOfGuns]

Neat!

[@stoneblue1795]

I was skeptical at first, but I really liked the end result quite a bit, that's a useful technique that could be applied to a lot of different projects, motorcycles, dirt bike, old toolbox. You earned a sub. 😀

[@3KindsOfGuns]

Thank you!

[@guitarplayzme6449]

America, where hobby lobby and guns meet

[@3KindsOfGuns]

Yup!

[@walter992]

Hands down the best DIY paint job on KZbin. I am going to have to give it a try.

[@3KindsOfGuns]

Thank you! Enjoy the process! Send me a picture on Facebook at 3KOG via messenger and I will post your results!

[@sebbean881]

Very nice result, congratulations! I even liked the first coat better, but the second coat is also awesome!

[@3KindsOfGuns]

Thank you! I was torn on if to do a second coat, and I was happy with the results.

[@mr.johnson3728]

I've been up for the last 3hrs watching videos on this and this is by far the coolest and most simplistic breakdown on the topic!! Thank you so much for the knowledge!!

[@3KindsOfGuns]

Your welcome! Hope your project turn out good!!

[@richard_zanormous3648]

Don’t drop it in the weeds.

[@3KindsOfGuns]

Yeah, it's pretty effective.

[@allenhammack8334]

Hands down the best rattle can job I've seen on the Tube

[@3KindsOfGuns]

Thank you! Please like, subscribe and post it on all your social media. Helps my channel grow!

[@DaveTex2375]

You could always do a practice run on something like an old springer airsoft or bb/pellet gun.

[@3KindsOfGuns]

Yup, could.

[@sway696]

Bro sick Idea. Gonna steal one of my kids tomorrow and try it.🤣 if it comes out good I'll just say I knew it would. 🤣👍

[@3KindsOfGuns]

How did it go?

[@bandnmajors1465]

It came out really good. Awesome concept. Well done Brother

[@3KindsOfGuns]

Thank you!!

[@207Jeff]

Damn. I never would have thought. Looks badass. Check in after a few months and a few hundred rounds with a vid too please

[@3KindsOfGuns]

Of course! Thanks for watching!

[@slovrien0]

I just completed my AR10 in 300Blk and it turned out GREAT!! I did go with a matte clear coat over the paint when I finished. Thanks!

[@3KindsOfGuns]

Awesome! If you want to, you can send me pictures of it on Facebook for me to share!

[@darkbulb367]

DUDE! That dish soap method works awesome for Tiger Stripe pattern! Simple, easy, cheap & versatile methods. I was already happy as hell with what he did 3/4 way through.

[@3KindsOfGuns]

Thanks!

[@noretreat151]

some one agrees with my opinion... planning to soap tiger AR using your style, but not the final step. new subscriber.

[@glockmaster9516]

@@noretreat151 yup I also preferred the first coat

[@BurtReynoldstash]

Same here, he did a great job tho

[@3KindsOfGuns]

Why did you like the first coat more?

[@TheRiskyDingo]

Definitely love the tiger stripe look. I did the sponge method on my first gpr which gave it a digital camo look. I'm gonna use this method on my spr for the tiger stripe drip.

[@3KindsOfGuns]

I've never done the sponge method before.

[@gdw1316]

Used this method this past weekend on an AR-10 build and I could not be happier with the results! Thank you for showing us how to do this.

[@3KindsOfGuns]

Awesome!

[@garrettsteele3886]

This may be a silly question, but how do you go about properly drying/cleaning all internals of the gun after spraying it down like that? Or is it even that important? Just making sure before I try this myself!

[@3KindsOfGuns]

Space heater works well. Then disassemble and clean and lubricate as normal. If you do it, send me pics on facebook!! 3KOG

[@JarlSeamus]

Interesting technique, I like the end result. The drywall tape works really well, I've also seen similar done with a mesh laundry bag. Nice pattern!

[@3KindsOfGuns]

Yup, and the only reason I didn't use a laundry bag, is that I didn't have one laying around.

[@JarlSeamus]

@@3KindsOfGuns In any event, the pattern came out awesome! I'm probably going to do a similar scheme to my AR-9

[@3KindsOfGuns]

How did it come out?

[@Semprefi]

The whole process is slick and the finished product is as cool as I’ve seen and better than most. Using the drywall tape instead of burlap or similar is way better imo. You could probably do a similar process using leaves and less striping for a woodland camo design too

[@3KindsOfGuns]

Yup, thanks, I am very happy with how it came out!

[@carlt8188]

The results look absolutely amazing! Well done.

[@3KindsOfGuns]

Thanks!

[@Aussiem8e]

Turned out better than I thought! Nice work!

[@3KindsOfGuns]

Thanks!!

[@fredrossi1334]

Looks great! I use various mesh fabrics, a metal hex mesh and craft store leaves. All stuff that I acquire from my wife's craft area. I use a matte clear over every thing at the end to keep the paint durable. My first project that I did as a test as held up really well. It's been on there for 8 years and gets well used. It's a Daisy Red Ryder, of course.

[@3KindsOfGuns]

The amount of stuff I have stolen from my wife's crafts to paint guns is pretty amazing!

[@BoneShots]

Came out great! I'm going to give this a try. Subscribed!

[@PoodooDdoo4U]

That looks really good. I think I would have gone a little more tan and coyote brown with a lighter drab. Maybe even a dash of light stone grey in spots but ONLY because I live in a desert region so it makes more sense for me and my surroundings. I've seen this same dish soap technique used for sneakers before as well. Very effective method, nice job bro. A tip though to anyone else looking to paint like this, lighter more misty multiple coats of paint tend to take longer to wear off. 4-5 very light dusting coats for the base layer works well in my experience. Thick coats will chip off alot easier. Also, if your colors end up a little darker than you meant to paint, you can hit it all with a very light coat of matte clear at the end to lighten shades up a bit and get a small amount of added wear resistance as a bonus. PS Rust-Oleum tends to last I bit longer than krylon in my experience, bet.

[@3KindsOfGuns]

Good advice. I'm doing another one soon with a different color scheme.

[@damuboi55]

Just curious what would be the best method of drying and preventing rust after hosing off the dishsoap?

[@3KindsOfGuns]

I used a space heater to bake the paint on, and dry it. Once everything was done, I thoroughly cleaned the weapon, and relubricated.

[@Rzut-Oka]

Great job! In Airsoft gun first we need put out the gearbox, electronics, hopup inner barrel ect.. I think what other than soap can I use 🤔

[@TheCamoguy987]

I was thinking the same thing. Let me know what you come up with...

[@3KindsOfGuns]

If you can't use soap, I would just use a more traditional method, like how I did my Recce rifle.

[@Rzut-Oka]

@@3KindsOfGuns can you give me a link ?

[@phudge6184]

Low temp hot glue. You could create the same patterns as with soap but instead of rinsing the gun you should be able to peel the glue right off.

[@3KindsOfGuns]

Interesting, have you done that?

[@helios_123]

this looks amazing. only thing i’m concerned about before i do this is using water? is that okay to use on an aeg? will it not rust any parts of the gun

[@3KindsOfGuns]

I have no idea if it could really be a useful method on an AEG. I believe it would work on a gas gun, but I haven't tried it.

[@Dubyatrader]

That looks amazing! Nice work!

[@3KindsOfGuns]

Thanks!

[@GungHoSourdough]

Is there any worry present for the dish soap working it’s way into cracks of the rifle and gunking it up?

[@3KindsOfGuns]

No.

[@BugsyNY]

I wasn't sure how this was going to work out but got to say this is one of the best, if not the best DIY rifle paint jobs I've seen. 😎

[@3KindsOfGuns]

Thank you very much!!

[@nates656]

This is an absolutely slick method (pun not intended). I've looked at a number of options with stencils, etc. I'm gonna rock this method this weekend. Awesome job man !! It looks great !!!

[@3KindsOfGuns]

Awesome dude!

[@hoofgripweightlifting6872]

WOW!! I gotta tell you. I have seen many camo vids. THIS IS THE BEST! Thanks for sharing.

[@3KindsOfGuns]

Thank you! Appreciate the feedback!

[@hoofgripweightlifting6872]

@@3KindsOfGuns Keep it up! I sub'd.

[@3KindsOfGuns]

@@hoofgripweightlifting6872 thanks!!!

[@Elhombresanchez]

You won 🏆 and we will all win as well thanks to your video. Good shit brother keep up the great work 💪.

[@3KindsOfGuns]

Thanks bro! New video coming up soon using this method to produce a snow camo.

[@OKBushcraft]

Came out great!

[@3KindsOfGuns]

Thank you!!! I was super excited to try it out, and am very happy with the results.

[@chadanderson123]

Ive always just used a laundry bag and painted in stripes. Gives you the lines, dots and helps break up the pattern. Might have to try this though

[@3KindsOfGuns]

I've used the laundry bag method, and it definitely works.

[@animatedadventures7927]

😂 dish soap he says, but does anyone know why??? Try using WD-40! Works also. Silicone goofy. Causes paint to create “Cells”. Your welcome!

[@3KindsOfGuns]

Interesting, thanks!

[@tacticaltray4907]

I love it! 😍👍🏽

[@3KindsOfGuns]

Thanks!

[@joshuar4470]

I don’t know if a second was needed but it looks pretty good. Soap didn’t spread or run out as much as I thought it would. I’ve been wanting to try this with a more desert color type pattern.

[@3KindsOfGuns]

Thanks, that was my first try, came out well. No reason it wouldn't work with desert colors as well.

[@ah6559]

Yeah, so that came out seriously awesome!

[@3KindsOfGuns]

Thank you!!!

[@BranDon-zt7bm]

Looks amazing. Kind of worried about hosing down the ar with water though. Did you have to take every piece apart to wipe each piece and grease or am i over thinking this?

[@3KindsOfGuns]

You are absolutely overthinking it. I removed the BCG prior to painting. That's it.

[@BranDon-zt7bm]

@@3KindsOfGuns thinks I feel more confident about doing still going to wipe and oil the outside at least

[@3KindsOfGuns]

Don't oil the outside. Screws up paint adhesion.

[@m83miller]

Dude this is sick. Nice job

[@3KindsOfGuns]

Thank you!

[@SykesFW]

Damn good job!! What kind of grip is that

[@3KindsOfGuns]

Daniel defense, it's the only grip I run.

[@cordovaphil]

Impressive! At first I was sure this project was FUBAR. Final result is bad ass!!!

[@3KindsOfGuns]

Thank you!

[@5jjt]

Nice work! When you flipped the pistol to do the otherside without rinsing first, did it have any undesired effects?

[@3KindsOfGuns]

Nope, worked fine.

[@SnipeLoisirsTestsCustoms]

Beautiful your technique, man you're serious ✊🙏👍😉

[@gregboggs4721]

Be sure to clean and lube or you might have bubbles coming out the barrel 😂. Looks awesome man.

[@3KindsOfGuns]

It got cleaned and lubbed after!

[@LooksLegitBro]

just did this, incredible technique, simple enough for an idiot like me to do, and turned out looking great.

[@3KindsOfGuns]

Awesome!! Feel free to hit me up on Facebook @3KOG. I'll share your end results if you are OK with it!

[@jasonkarnes7794]

That was pretty damn cool?

[@3KindsOfGuns]

? Mark for fun?

[@the__project__8707]

I'm newer to guns and want to paint mine. My question is does nothing rust after spraying the soap off? Is there a special way to dry everything off and what did you remove before spraying it down with water or even while painting?

[@3KindsOfGuns]

Tape it up, spray it. For drying I used a space heater in a small bathroom.

[@the__project__8707]

Thank you!

[@3KindsOfGuns]

Of course!

[@johnmikel5934]

Nice job man. Broke all the sharp lines.

[@3KindsOfGuns]

Thank you!

[@burgerlord1297]

Looks awesome im going to try that method

[@3KindsOfGuns]

Let me know when you do!

[@sniperjay0916]

You could earn some serious cash from me!

[@3KindsOfGuns]

What would you pay for a paint job like that?

[@ofromda860]

I am totally terrified to do this, I have never painted an AR before... but this looks so bad ass that I have to go for it, thank you for the awesome video!

[@3KindsOfGuns]

Feel free to send me your results at 3KOG on Facebook, I'd love to see it!

[@anthonyv2645]

I’m also a little freaked out about doing it! But, I guess no matter the pattern it should look bad ass. Nice video! I just bought all the paint and some leafy stencils. Also, going to finish it off using a matte clear coat. Here we go!

[@3KindsOfGuns]

How did it go?!?!?!

[@jamiewashere]

Why would anyone want a gun like this? Its a weapon of combat. Why would anyone want this if they aren't active in front line combat? How are they even legal? This makes no sense.

[@3KindsOfGuns]

Been to war on two separate occasions. I never had to carry a gun like this. Semi auto rifles aren't the killing things you think they are.

[@silentfox8]

that looks incredible

[@3KindsOfGuns]

Thanks!!

[@outdoorzone]

Plastic Gutter leaf guards give kool stencil affect with diamonds like a rattlesnake instead of just spots like in vid!

[@3KindsOfGuns]

Yup, there are lots of different options.

[@hansblitz7770]

That's freggin smart.

[@3KindsOfGuns]

Thanks!

[@brawndothethirstmutilator9848]

The end result was sick! It’s like a marbled tiger stripe camo.

[@3KindsOfGuns]

Thanks, it was my first time using that method and I was very happy with the results!

[@cingram8939]

Correct MC,,,, got one i wanna do this one,,,,i want that same look dish soap gives such a natural unatural wild brush camo look aka not mechanical but a natural unpredicted pattern,,lol if that describes it lol,,,but again definately super nice,,,,got a question,,,and this is because I dont know,,,but would the watering or hoseing it off like that with such a degree of water be a concern,,i mean the concern for possible rusting or would it be wise to say lube it really good,,,ie the inside where components are...?

[@zebradun7407]

I went into this thinking Bro you soaped your AR? Then I said, Holy Jesus that looks cool as hell.

[@3KindsOfGuns]

Thank you! I was very happy with the outcome as well. I am going to redo my Recce rifle using this method as well. Nothing like hosing down a $5k AR!

[@DatCityBoy504]

Same here at first the soap and water had me like wtf NOOOOO but I thought if that mf can't handle a little soap and water I don't want it. I'll try it out for sure but just the thought of painting on my brand new rifle. Geez, here goes nothing.🙏🏼✌🏽

[@3KindsOfGuns]

@@DatCityBoy504 I also painted my $5k the traditional way. I'm probably going to redo it with dish soap now that I know that works.

[@ironsights1809]

That is one BAMF. Great job!

[@3KindsOfGuns]

Thank you!!

[@SharpGhost90]

It works and looks great

[@3KindsOfGuns]

Thanks!!

[@DWESENTERPRISE]

I was looking in the comments but don't see it asked... Anything we need to do after it's dry? Cause the water & soap will get inside, right? Dry and oil?

[@3KindsOfGuns]

Yes, dry and lubricate.

[@melvinhowell5469]

Beautiful job...unfortunately, I just can't bring myself to spray down my rifle with water...not saying it's wrong...I just can't do it...Kudos!

[@3KindsOfGuns]

I had issues with it for years, until I realized I was wrong, and it really doesn't matter.

[@joemama-xw1jh]

Just have remember it’s no different than the rain, dry and oil after and it’ll be fine

[@3KindsOfGuns]

Exactly.

[@__tacocat__]

That looks amazing

[@3KindsOfGuns]

Thanks!!

[@austinpowersfasha8878]

I don’t think the magazine is scary i think its awesome. And i cant believe how good that turned out.

[@3KindsOfGuns]

Thanks! I'm really happy with it as well!

[@8mmmauserman]

Looking at painting a rifle soon, and I loved this video. I feel like if implied in a certain way, you could do a cool tigerstripe look.

[@3KindsOfGuns]

Absolutely! Good luck!

[@williamgeorge2591]

The coolest looking spray video on KZbin. Maybe not super effective but it looks so cool.

[@3KindsOfGuns]

Man, you hurt my feelings, how is it not effective at breaking up the outline of a gun?

[@williamgeorge2591]

I’ve seen camo comparisons on different backdrops from kuiu and Sitka ect. And it seems, at distance, that larger patterns help break up lines better than smaller more detailed patterns. I’m sure it’s better than a black or monochrome color.

[@williamgeorge2591]

I’ve seen camo comparisons on different backdrops from kuiu and Sitka ect. And it seems, at distance, that larger patterns help break up lines better than smaller more detailed patterns. I’m sure it’s better than a black or monochrome color.

[@3KindsOfGuns]

Yup, different colors will work for different environments, no question on that.

[@AramanahyCouto]

🇧🇷Muito boa ideia!!! Pode ter certeza que iremos fazer por aqui👍🏼👍🏼👍🏼🇧🇷

[@3KindsOfGuns]

Gracias!!

[@tires2burn]

How durable is a paint job like this? It looks great but what about down the road a few months after regular use and cleaning? Solvent friendly?

[@3KindsOfGuns]

I did a video about how it lasts, there is no reason to clean the outside.

[@dirtybrd702]

You're final step should be a nonsheen clear coat it will protect the finish from peeling off especially on the stock and pistol grip but otherwise 👍

[@3KindsOfGuns]

100 percent. I just didn't have any when I was doing it. Baking on the finish with a space heater has also really helped the paint stay.

[@Blueknight1960]

I never considered painting my guns but, I like that. Since I have 3 of the ar's, I think I'll try painting one of them and see how it turns out. I'll have to think on it before painting my scope though.

[@3KindsOfGuns]

Don't be scared. Paint the scope.

[@Blueknight1960]

@@3KindsOfGuns Not scared, just need to think on it.😁

[@3KindsOfGuns]

How did it go?

[@Blueknight1960]

@@3KindsOfGuns Still haven't got around to it yet.

[@3KindsOfGuns]

That happens

[@TRIBE.OF.ZEBULUN]

LOOKS GREAT, I JUST PAINTED MY 7615 WITH ENGINE ENAMEL, AND BAKED IT IN THE OVEN, BARREL AND RECEIVER IN CAST IRON, THE REST FLAT BLACK, BUT MIGHT JUST HAVE TO GET SOME MORE PAINT AND DISH SOAP.

[@3KindsOfGuns]

Good luck!

[@doublewayne1089]

paint and dish soap...??? first clip Drywall tape and blue masking tape..CLICK BAIT !!!

[@3KindsOfGuns]

Lol, did you watch the whole video? I used wY more dish soap than I did dry wall tape.

[@raleighdentcompany]

Definitely the best way to get good breakup.

[@noretreat151]

before last soap Application and spray was near perfect tiger-stripe/ after... not so much but still a good combination of shade.

[@3KindsOfGuns]

Yup, wasn't going for tiger stripe, so the second application was perfect for what I was looking for.

[@CaliforniaPewPew]

This video inspired me to do the same thing (or at least my version of it) thank you for the dope video. Yours turned out a little bit better than mine i think. I should have done the 2nd coat with the soap going opposite direction like you did. I still love the way mine turned out. But I'll do closer to this next time for sure. Btw, it's my most recent video if you want to take a look at my outcome. Thanks again ✌️

[@3KindsOfGuns]

Awesome!!!

[@Saintbow]

This is outstanding. I have used similar methods (such as Rice) and I can see the wide range of applications for the soap method. Have you ever thought about using oil instead of soap? A .99 cent squeeze bottle (you can cut the tip off to gauge the amount of oil) and paint at will. Just in case some folks are not big on the soap idea.

[@3KindsOfGuns]

Nope, have never considered oil, but I am very intrigued by the idea of rice to add visual texture. Will try that on my next one!

[@onlinebills9169]

I would think dish soap is easier to wash off, than covering your gun with oil and then trying to wipe it off. I think dish soap is a pretty smart way of doing it!

[@3KindsOfGuns]

Thanks, I am intrigued by the idea of using some rice....

[@vincentgrippi9524]

I rattle canned my AR by using burlap first and then a hanging fern leaf last , the camo pattern literally made the rifle invisible at night , I won’t set it down in the woods because I probably wouldn’t be able to find it , going to do my 10-22 next , there are a few other steps in the process I didn’t mention so if your thinking about doing your rifle you just have to go for it , no guts no glory

[@3KindsOfGuns]

Yup, it's not hard to do, just have to do it!

[@pepwatch]

Looks great. How does it hold up after a while? And would it be difficult to remove if you wanted to change something?

[@3KindsOfGuns]

I did a whole video on it holding up, and mostly it's doing well.

[@knightofbrokenglass9237]

pure genius

[@3KindsOfGuns]

Thanks!

[@Ray-ml6iy]

Honestly, this is bad ass! Best scheme and finished product I’ve ever seen on KZbin…. Cheers!

[@3KindsOfGuns]

Thank you!!!

[@Littl3RayOfSunshine]

Dude, get the off brand soap for this. No need to spend that much on Dawn when the off brand works the same. Idk, maybe I'm just a cheap bastard.

[@3KindsOfGuns]

You are probably correct about that. I have heard that clear dish soap does better than cloudy, but I have never tested that.

[@cingram8939]

and its tru lots are skeptical including me but its something that just keeps hammer away at me until i do it i guess....i dont have something super expensive. what gets me is when you hea lots say,,,he once you go in literally cant come out or cant be undone though ive heard some differ and state possibly can,,,but im like if i do it then im not necessarily intrested in undoing it,,because if comes a day when(SHTF) SMILE (SOMETHING or STUFF HITS THE FAN) SMILE then its easier to adjust to environment or surroundings with the simplicity of a mere rattle can to dress it close as you can....very well recorded visual sound every thing ,,,even the sound effects of your dog with the plastic bottle smile...Supah Nice!!

[@3KindsOfGuns]

Thanks!!

[@arkitekto323]

Holyshit!

[@3KindsOfGuns]

Thanks!!!

[@timjohnson8390]

Crazy! This whole spray painting a $1k+ rifle/pistol reminds me of when there were ak's and sks pattern rifles for $200 and they all got Bubba-rized with plastic stocks and cheap slings. Why don't you just order a rifle with the color pattern you want?

[@3KindsOfGuns]

I enjoy spray painting my guns. It's interesting to see what patterns I get, and I can easily change them.

[@michaelmongillo1237]

This video was hard to watch... All I could see was that BIG SCARY MAGAZINE 😨 😂🤣😅🤣

[@3KindsOfGuns]

Some people feel that way. Fortunately, at the time of recording, it was limited. It's a not anymore.

[@matthewd.1805]

Wait... why on Earth do you have a pmag 40 rounder limited to 28 rounds?? Furthermore, why on Earth does such a limit device even exist?

[@3KindsOfGuns]

Literally just a piece of plastic inside the mag, so that youtube doesn't demonitize the video. It does not have it in there normally. Just trying to play by the stupid rules.

[@B.W.Broom-xc6gs]

😮Absolutely SICK, bro, well done.Looks as good as dip if not more because its totally one of a kind. Bravo. 👏🏻

[@3KindsOfGuns]

Thank you very much!

[@senswiwuu]

Very impressive! At first I was like this guy is crazy AH! But the result is ligit! Thanks for making the video, I'm going to be trying it soon 🤞🏼

[@3KindsOfGuns]

Thanks! New one coming up soon!

[@johnkeesee9160]

Love it, but what freaks me out, funny enough, is hosing off with water hose, lol. Seems so counter intuitive. So what's your technique for drying, re-lube, etc...?

[@3KindsOfGuns]

Dried with a space heater, relubed as normal. I use tw-25.

[@jackblackpowderprepper4940]

Wow, I wasn't sure on this technique but that is awesome. Nice job.

[@3KindsOfGuns]

Thank you!

[@wulfclaw4921]

Best I've seen as a DIY job !

[@3KindsOfGuns]

Thank you!!

[@DavidWilliams-ig5ec]

Nice work, I'd not seen that technique before. Assuming you lated hosed it down with WD-40 or similar to purge the water.

[@3KindsOfGuns]

Just cleaned the crap out of it, and dried it with space heaters.

[@Osprey1994]

Personally would have stopped after the first round of dish soap. But overall it looks rad, and really breaks up the pattern of the rifle compared to some of the other paint jobs I've seen.

[@3KindsOfGuns]

I've heard that from a lot of people, I really like how it came out, but if you like the stripes, you could certainly stop after one.

[@queque3464]

How's the paint holding up? Clear coat?

[@3KindsOfGuns]

It's holding up ok. I definitely recommend applying a matte clear coat to make it last longer. I will be doing that next time.