WIZARD FRAMES SETUP // LETS FINALLY GIVE THEM A TEST

▶︎ ➡️ LEARN HOW TO SKATE: bit.ly/HOW_TO_SKATE
► ⬇️ 100K, LETS GO ⬇️
►🇬🇧 bit.ly/wheeladdict ►🇵🇹 bit.ly/wheeladdictPT
►🎧 bit.ly/RicardoLinoYTpodcast ►⛸️ bit.ly/JUSTSKATING
► ⬇️ 100K, LETS GO ⬇️
►🇬🇧 bit.ly/wheeladdict ►🇵🇹 bit.ly/wheeladdictPT
►🎧 bit.ly/RicardoLinoYTpodcast ►⛸️ bit.ly/JUSTSKATING
► 100K - LET'S GO ➡️ 🇬🇧bit.ly/wheeladdict 🇵🇹bit.ly/wheeladdictPT
➡️ WHEELADDICT T-SHIRTS - BUY HERE:
white -► bit.ly/wheeladdictWHITEshirt
Black -► bit.ly/wheeladdictBLACKshirt
► Support this channel by using code "lino" at :
- www.bladeville.com
- www.hedonskate.com
WIZARD SKATES SETUP // LETS FINALLY GIVE THEM A TEST
Support The Lino Life:
- / ricardolino
Gear used to make my videos:
- bit.ly/LINOSGEAR
my website: www.thelinolife.com
my Instagram: / ricardolino
my twitter: / ricardolino
my facebook: / ricardo.lino .
#wheeladdict #ricardolino #becauseitsfun #skating #inlineskating

[@salmiano2094]

Love the videos! Helping me so much

[@RicardoLino]

Thanks for the feedback Really glad they help Lotta love Lino ❤

[@J3f3R20n]

At first i hated this Intuition liner because i couldn't get more than 15 minutes of skating with them....a lot of pressure points and toes being numb from the liner being too tight....But after a couple of months it loosened and it fits perfectly, so perfect that even regular shoes i tend to get a better fit now hahahahaha But outside of the regular Seba SX/CJ and USD Carbons, i never skated other skates so i basically jumped straight into them hahaha My last setup was a Flying Eagle Phantom Frame, 4x100mm, straight flat and it was a pain in the back to turn and do corners with it....even basic powerslide/powerstop moves was hard....The Wizards feels basically like i'm skating 80mm or even a bit slalom skate but with the speed of 100mm and the stability the longer frame gives to me in terms of forward and backwards leaning. They are pretty great.

[@RicardoLino]

Still need more time on these.. :) got my whole life ❤⚡

[@nabiliabdelhak4707]

Some of My friends have just normal skates. Yet, they can fly with them. As you said, the skater matter more than the skate. Respect from Morocco

[@RicardoLino]

EXACTLY!! hoping to visit Marocco anytime sooon:)

[@TrentOWNZ]

Clean bearings + fresh name brand wheels and proper double push technique with your weight forward is the secret

[@nabiliabdelhak4707]

@@RicardoLino you're most welcome in my house. It's pleaser to see Mr Ricardo here 😊😊

[@lyntonhowes5154]

Exactly. I thought I needed fancy skates but after watching the amazing stuff Shone does in basic skates I realised it's absolutely skater first, skates second!

[@nopenopenein8243]

It is sad that you still haven't filmed a full part. The skating you did for just 40 minutes was great and you have a dope style. The review - it kinds feels like you are a bit unprepared for it but oh well - still a fun video.

[@derekvanheumen5428]

You are to good even at a skatepark👍 keep up the good work

[@RicardoLino]

🙏🏻 I enjoy skating almost everywhere.. skayepark is super super fun even if I dont go B I G

[@derekvanheumen5428]

Ricardo Lino you are my idol

[@daviddunneart]

I love coming back to older videos and watching them again :) 🙌

[@udihu]

You are killing me with the way how St andres is pronounced. It is completely same as a hungarian town and you always get me wondering what do you do in Szentendre

[@pachamarcs5168]

How does it feel in comparison to the Adapt GTO skates? and how would you compare Wizzard frame with Adapts Quattro Mount frame?

[@jheaven2774]

I love your videos man, so informative 😀

[@RicardoLino]

thank you sooo much

[@SerialWheeler]

Totally agree. If you're having fun with any skates, they could be the best. This is exactly how I feel about my RB 110s. Must admit that I also feel the rocketing of the Wizards could be a bit strange to get used to

[@kabask8er]

Great skating.😉👍✨

[@cityskaters]

This setup looks just super cool!! We need to see more of you on wizards bro!! Greetings from Athens!

[@texrov]

Looking smooth agile and responsive, i hope they will become more comfortable for you.

[@Illestrapper]

any suggestions on a comfortable fitness boot? Tried the VO2 skates from K2 and the swell from powerslide and the amound of ankle bite is ridiculous.

[@gycx]

Hi Ricardo, mind if i ask which kind of spraypaint did you use for making your CJs glossy black?

[@felmlyd]

Toe box on the gutted CJ is a bit tight. Heat molding and breaking in can help. Seba is doing some prototypes with a larger toebox.

[@Johro66]

Yes but the Intuition liners take some breaking in too, I had the same experience in my seba sx skates, thought they were too small at first, but after some more time in the skates the liners softened and shaped and now they're fine.

[@bradmcgowan5186]

felmlyd I find the toe box on the SX2 boot is also really tight out of the box as well. I’m breaking in a second set of new boots and that area really requires some serious break-in I find. Any tips on heat molding the front area of the boot?

[@juliepurpleskater1736]

I use the double lacing system on my Seba Highs, and it works great. It gives me FIVE different points of tightening or loosening adjustment!

[@spacejamgoliath]

Care to explain this? I'm having a little trouble with my newest roller hockey skate laces

[@Thomas_de_Meijer]

I think you need to loose the insole, if you haven't already. Or put in half insole. Also, I find my wizards a bit weird on a super smooth surface, but on rougher concrete they feel really natural.

[@RicardoLino]

no insole on these :)

[@jonjonno240]

Great video again. U the best you tube skate channel

[@RicardoLino]

Thanks Jon 🙏🏻🙏🏻🙏🏻🙏🏻❤

[@imacat4060]

@@RicardoLino true words

[@stijnw8626]

Great video, as always! What's the name of the song?

[@RemyCadier]

The skating looked superstylish and in control bro. Liked the fakie up the bank to slide.

[@lukasf5256]

They really suit you, I LIKE YOUR "NEW" STYLE!

[@walterdavisii8936]

Summer In Memphis.... That's Home.

[@danmcgivern4057]

Ricardo and Deco look like each other

[@kingofjuice4087]

I still gotta pick up new liners for my cheap razors but the season is still cold here anyways

[@zach4462]

Hi Guys. I have the Wizard NR90. Best skate ever. I tried switching frames for Kizer Trimax 110mm. Hated it. Didn't feel right. I also tried the Oysi aggressive frames and they were super slow and I didn't like the low profile. The wizards are my favorite frame thus far. I'd like to try the Wizard NR100 but I think the NR90 is probably the best all around choice. My two cents. Love this guy Ricardo Lino. Great Videos!!!!

[@Abelito8301]

Hey Ricardo I have a quick question, on this set up you are riding a size 42(US9) because of the downsizing factor, what size skate do you normally wear without downsizing and what type of foot would you say you have? Wide, narrow, thick etc,?

[@akcel34]

Deco is nice

[@XbunkerXballerX7127]

Ricardo. Skip the lace loop on the part of your foot that hurts. Simply don't cross the lace over instead thread it back through the next eyelet on the same side

[@facebreakr]

Would a wizard set up be good for or better for commuting to and from work or would the urban set up be better? I’m looking to build something or buy something already set up for this. Also I’m 6 foot 1 and 280. Not sure if that affects an answer but there it is. I wanna get fit doing what I did when I was much younger.

[@CC-fi3pp]

Wizard is definitely for tricks, you'd carry them to the spot then put them on.

[@GPA104]

Blessings 😇🌎⛸👽

[@WhoseUly]

Lower the #a the softer it is right?

[@Johro66]

Hey Lino, on my first time skating in the Intuition liners they were TIGHT, so much so I thought the skates were too small, took a few more outings to become comfortable, now they're perfect! By the way, I agree about the tightening of the skates, I have the seba sx2 version but it's pretty much the same skate, be it plastic shell, not carbon, and it's a bit difficult to tighten properly on the top part of the foot where the boot is widest, it doesn't really pull in when you pull the laces, and I pull so hard on the velcro mid strap I'm afraid I'll break it ha.. I'm not a fan of the velcro strap, I would prefer the 45 degree ratchet strap, like I have on my FR1's. But they skate very nice, and I'm still learning!

[@RicardoLino]

i think the racthet now would create even more pressure ont he ball of my foot..but in future maybe :)

[@Johro66]

@@RicardoLino ah OK, for me they don't really tighten that well on the foot, but fine around the ankle. It's more about locking in the heel. But you have the carbon CJ, and I have the plastic boot SX, there's the difference I think, they are wider

[@RicardoLino]

that might the difference..carbon is usually REALLY DIFFERENT :)

[@This_new_handle_system_sucks]

​@@Johro66 Heel lock in the intuitions is horrible in my opinion, I have them in a pair of gutted Seba Carbon High lights, not the widest skate but for me those little moons were simply not enough to get my heel tight enough in the skate. Everything was tight as hell, but my heel was simply not locked into the boot, I honestly don't think it's the SX that's the problem it is the liner. I've bought some of those sheets self adhesive foam, compared with some other liners where they are bulky at the heel, and put some of the foam on the outside of the intuitions to create more of a heel pocket like the other liners I have. Was some trial and error but now it are the best liners I've ever had, hope they improve the heel locking part in a v3 liner though.

[@Johro66]

@@This_new_handle_system_sucks thanks man I'll give it a go

[@callumsims6326]

Hi I have been watching your channel for a while and I found out you know my friend Paul Kerry also love your vids 👍

[@RicardoLino]

:D yap Paul and I have been digital friends for quite some time now :)

[@danidingo977]

Daco needs some lighting. He blends nice with the seats. :)

[@RicardoLino]

Hehehe... deco is camouflaged

[@TimAches0113]

What breed is your dog? My mum rescued a dog that looked so similar, most cute and lovely dog ever!!

[@RicardoLino]

pavement special :) :) hehe..its a rescued that came with us from South Africa to Portugal :)

[@BOBtoper]

It doesn't matter what gear you ride, it metters what can you do with it

[@marquisb2016]

How would you rate Wizard, Endless, and NN in comparison to each other in terms of “Wizard” style skating?

[@jbullfrog81jw]

You sure I thought the set up was mushroom wheels 86a

[@ktextreme]

The liners will break in eventually Ricardo. To speed up the process you can do a custom heat mould by putting a blowdryer on low heat for 5 minutes into each liner then wearing them for 20 min

[@adamzocchi]

Hey Ricardo! What is your ethnicity?

[@jrutman4441]

Ok. I'm new to inline and I've gotta ask. What makes slayed worth $1000? I mean. I'm way to New to say anything. But I'm just curious

[@TrentOWNZ]

So Whats everybody's favorite bearing+wheel combo!? Leave a reply im on 4x80mm 86a atom matrix wheels with bones swiss 6 ball bearings which alone cost as much as my bladez did new 😂 i only skate paved asphalt trails no fancy stuff

[@247rol]

all the sunday morning happy stuff... too small skates are gonna ruin it. Dont they have individual shellsizes? haha i'm not squeezing my feet in 42s anymore.

[@supertetramethylcyclohexan39]

Your dog thinks you're just talking to him, so he's just being quiet

[@mastichka]

I wonder no owner mentions that these are damn heavy. 2.250 Gramm each is the 100mm setup. Imagine how much will be the 110s.

[@RicardoLino]

for me i have to tell you i was never a light skates geek..they are for sure heavier then my micro delta Fwith carbon cuffs anf 3x110 but they are used for a different type of skating...at least for me..i stay on the ground :) but you are right..not the lightest..

[@mastichka]

@@RicardoLino my loose knees are the reason to be light skates geek plus my size is 46-47 EU, thus mine 110s Wizard would possibly hit 2.5 kg and taking in mind I've jumped from 2 kilo modified 110mm Doop Swift 100 into 1.5 Swell Voltage Blue and felt much more agile and easier doing stuff. I even considered buying hockey skates because of the weight but those are 100mm max. Thank you for replying and keep up the good work.

[@Wizaris84]

@@mastichka My Wiz 45eur NR110 weight 2.5kg ( a bit more with the plastic cuff) but it's a great workout for my back and core muscle

[@mastichka]

@@Wizaris84 Thanks for completing my info on the Wizzards. Now I know for sure they are not for me at all cause I'd definitely go on the biggest possible wheel setup. Anyway I'm happy enough with the Evo pro on Katana 3x125 - 1.75kg.

[@CnockCnock]

What do you mean with "I'm not used to skating on 2 wheels at the same time"? Thank you for this channel btw, after every video I just have to go out and skate!

[@chapoguzman2448]

You can rocker the wizards more ways, looks like he rockered them so only two wheels at a time touch the ground

[@JakeyDill]

CnockCnock the wizard frame is rockered.

[@CnockCnock]

@@chapoguzman2448 Just got into skating after a decade and had no idea. Thanks for the info!

[@chapoguzman2448]

@@CnockCnock im a recent returner as well after 8 years of not skating, im still bad at skating tho lol

[@CnockCnock]

@@chapoguzman2448 From reading comments I have the impression there are so many of us returning to skating after a long break. Same here, can't stop without a heelbreak for the life of me, skating all the time though so we can only get better, need to rely on that muscle memory at first!

[@CityBlades]

Lol the rocker isn't that severe, and wheels squish... you're on at least 3 wheels at a time

[@stetonhowton9027]

42 can I have them lol I'm just joking I might be getting me some new skates but idk I'm trying to get me some rollerblade twister egde x but I have to save up and all that

[@dominikchernin1318]

why every time he says skates , in the captions it writes kids? ^_^

[@NikZvi]

If I will have free 1000 bucks., I know how to spend them...

[@NonExistantNobody]

I think these are ridiculously over priced and have no benefit above 150-350 dollar skates.

[@SeattleGenXDude]

They also look weirdly bad.

[@kenmastersmaster]

Correct!

[@cameronwetherell6129]

And that’s fine, some people think it’s worth it, skating is a huge part of this guys life. And for him they are worth it. It’s not for everyone

[@NonExistantNobody]

@@cameronwetherell6129 Yeah if u can afford it fr fr

[@kenmastersmaster]

Paying $400 for some ugly frames is laughable

[@697_]

Sorry but no.. them $20 No Fear Skates are NOT the best skates in the world. At best they’ll be the only skates you’ll ever buy but that is not because they are the best but because they got you disabled or death.