Woodturning an end grain Ash bowl

An end grain Ash bowl. Thank you David Tyers for the wood.
To buy any of my Carbide tools or cutters visit my website;
www.ukwoodcraftandcarbidechisels.co.uk
www.buymeacoffee.com/glennliza
Thanks for watching.
#ash
#bowl
#chuck
#home made wooden chuck
#woodturning
#wood
#grain
#Roughing Gouge
#Carbide Woodturning Tools/chisels
#skew chisel
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

[@oldncarvingJohn]

Great result ❤❤❤

[@glennteagleofukwoodcraftca5308]

Thank you John. Glad you liked it.

[@William_Kenny]

Nicely done Glenn👍😊

[@oldncarvingJohn]

Thanks

[@glennteagleofukwoodcraftca5308]

Wow John. Thank you so much. Your help and support to the channel is greatly appreciated.

[@waynehardy6955]

Great video as usual. You’re always going to have to work out the kinks with new equipment you will soon find the sweet spot with the Mike. That bowl reminds me of the old Bon jovi album slippery when wet

[@glennteagleofukwoodcraftca5308]

You're right Wayne. We are going to try a few other ways with the mic. Let us know if the sound improves on the next few vids. Liza says "finally another fellow Bon Jovi fan"

[@MillfieldWheels]

Good video as usual but preferred the old microphone, seemed clearer.

[@glennteagleofukwoodcraftca5308]

Thanks Ian for your feedback. We have listened to it and it cancels out the lathe and dust extractor noises, which was what we wanted. However, this is our first time of using it. The mic may have been too close for Glenn and mine unfortunately switched off for some reason. We need to test more but will be using them. It's important people hear what Glenn is saying, as he will not turn without a mask unlike some professional turners who don't wear a mask so you can hear them. We want to uphold safety as well as providing you all with clear information. These are also wireless mics as Glenn will not have wires connected to him, as this can also be a danger in the workshop.

[@mnp1964]

Too bad about the other bowel Glenn I suppose you could fill the cracks with resin. If you wanted to try to save it. The little one looks great hopefully it does not crack up to bad Blessings to you and Liza and Happy St Patrick's Day

[@glennteagleofukwoodcraftca5308]

Hi Wade. I hope it doesn't crack too. It's a test to see how the bigger one will go. We want to keep them. It should make a lovely fruit bowl. Blessings to you too and Happy St Patrick's Day to you too.

[@tommygarrett9486]

Love your videos. New microphones have a litte cracking in it.

[@glennteagleofukwoodcraftca5308]

Thank you Tommy for your feedback. We have listened to it and it cancels out the lathe and dust extractor noises, which was what we wanted. However, this is our first time of using it. The mic may have been too close for Glenn and mine unfortunately switched off for some reason. We need to test more but will be using them. It's important people hear what Glenn is saying, as he will not turn without a mask unlike some professional turners who don't wear a mask so you can hear them. We want to uphold safety as well as providing you all with clear information. These are also wireless mics as Glenn will not have wires connected to him, as this can also be a danger in the workshop. The cracking is when Glenn moves as it is clipped to his clothing or when wood hits it.

[@christopherharrison6724]

Liza sounds a bit muffled is this deliberate 😂,does she get a mic too

[@glennteagleofukwoodcraftca5308]

Liza's unfortunately switched off for some reason

[@anthonytonkin2415]

hi guys its anthony tonkin wife got me one of your sch3 tools last week for my birthday any chance of a short video on useing it just strugglin a little bit

[@glennteagleofukwoodcraftca5308]

Hi Anthony , watch my last video and see the video in this link kzbin.info/www/bejne/a5bIiJiknZJ-b6s

[@mashmade-airth]

Hi guys. I preferred the old sound but I guess it's just getting used to the new mics & you fiddling about to get the best from them. We can still hear you & I suppose that's the main thing.

[@glennteagleofukwoodcraftca5308]

Thanks for the feedback Jim. Still getting use to them.

[@barneyrubble5633]

Agree, sound not as good/clear.

[@glennteagleofukwoodcraftca5308]

Thank you for the feedback.