Working on Karl's 1971 GMC Ramp truck finishing the ramp deck!

[@markmckeachnie4484]

I’m a subscriber to both of your channels and love it when you two get together, Carl seems to really appreciate at you Brent and Viciversa

[@lewiskemp5893]

I agree. They're my favorites no matter the channel

[@Thomas_LVHD]

Haha the same!

[@paulelarson1912]

Thanks for coming to back to 50s I saw you and your wife in your truck driving around it was great to see you I'm glad you had a good trip home

[@tarbogas66]

Enjoyed the video "that truck is Mint" and cool music ! Had a good time, thanks Brent🙏🏼

[@ronbunker5778]

You guys have fun working together and that's what's important. I noticed you Candian fellows call the aluminum plate checker plate. I've always known it as diamond plate.

[@glennnickerson8325]

Nice to meet you Brent! Got a picture in front of the General.

[@robbieautrey3158]

Great to see you and Karl working on his GMC Ramp Truck Brent. You guys are doing an awesome job, can't wait to see the road trip.

[@Thomas_LVHD]

It's a real pleasure to see you working together, knowing that I've been following you independently of each other for a long time. Thank you guys for your collaborations.

[@georgeponnay447]

Truck looks super! Thanks for the great video and music 👍

[@davidhatch2558]

Let Karl know his ramp truck looks awesome. Thanks Brent for the video

[@johnblake3863]

That GLASS is amazing!

[@larrydixon-vi7ld]

I miss my friends that helped me and I them working on cool stuff , most have passed on and just dont have it in me at 62yrs old , love your friends they are better than close family most of the time

[@lindenjohnson1515]

I have watched hundreds of builds over the years - this one is my absolute fave! Thanks guys!!

[@TrendsbySterling]

It's nice to see you two working together again. You guys are great fabricators!

[@subxject]

That ramp deck looks fabulous. If all else fails, which I’m sure it won’t, you could use it upside down as an amphibious landing craft.

[@lewiskemp5893]

I can't wait to see your GMC roadster on the back of Karl's GMC

[@AndrewHCann]

Excellent video Brent :) , Karl :) like how ramp truck came from past to present and new look too very good work together too! 4 thumbs up and excellent music too !

[@terryeustice5399]

Brent that’s some of the fastest welding I have seen you do. Great Job. That Fast cut. Will help you a lot, thank you for sharing this joint project. 💯👊👍❤️

[@milwaukeeroadjim9253]

I like your choice of background music. Sure got a lot of fabrication done on this video. Thanks for taking us alone for the ride.

[@user-lj1hi4xh6o]

Brent you go out of your way to help Carl. and he does the same thing. You guys are awesome.

[@alangovan1852]

My that truck is looking amazing

[@briankinnear7461]

Have already seen Karl's version of this same time period. Interesting to get the different perspective on your channel. Some great progress. Nice work on the doors and storage box framing. The plans for the storage boxes sound great. You two, and Elio, always seem to have a lot of fun. Look forward to more. Be safe and stay well.

[@harrytaylor6854]

Wow Karl's very lucky to have a great friend in you .Well done sir Brent.

[@lorenmeyer5290]

Ramp truck is looking AWESOME

[@richardhill4862]

Good progress, the truck is about ready to go down the road.

[@bass60guy]

Nice helping out a friend! Looking good with the ramp truck framing! Safe travels and minimal problems on the 4500km trip!

[@alanpaulick7815]

It is great when good friends work together. Good times are golden. Brent thanks for sharing your content.

[@stanleymartin1613]

Great video! Enjoyed watching the progress ✌️ 😎

[@jackmehoff2961]

Minty ! Thank You for sharing your video, and letting us hang out . Later ...

[@grantverhoef673]

hello Brent its nice to see u and Karl working together great teamwork awesome 👌👍👍

[@rtscippio]

I really like that COE and at first gleams I almost thought it was a crew cab sweet

[@paulvanhouts3365]

Hey Brent, at 27 minutes, Carl found his sleeper cab for the truck! It’s big enough. Great seeing you all at work again. That fast cut is quite a versatile unit and looks to do really great cutting. It will be amazing in your tool kit too.

[@marca5883]

Ah the ultimate dream team of fabricator/welder/custom car builders,on KZbin 💚🇬🇧🌱

[@upnorthyooper1196]

@26:58 In the 30's and 40's semis had sleepers under the trailer on some trucks called coffin sleepers. The stones thrown by the truck wouldn't let you sleep and there were some cases of the sleeper falling off and getting run over by the trailer. Looks Good !

[@ScottGovey]

That's awesome! I wish I had friends like you guys! Even though your far apart, you still manage to get together and help each other build cool stuff. I'm subbed to both your channels, I found Karl's 1st and found yours through his. Keep on sharing your journey's with the world! You both have inspired many to pick up tools and start doing what you guys do. Cheers!

[@HalfassKustoms]

That's awesome, gotta start somewhere :)

[@johnkranz4004]

Excellent work Everyone who worked on this project Brent and Karl

[@TheCrackerBox]

Thanks for another , Brother !

[@JDLarge]

I’m watching the vid and “puttin on the ritz” comes on and the wife says “that sounds familiar. We watched “Young Frankenstein” again a couple of weeks ago so I did my rendition singing “PUTTIN ON THR RITZ” like the monster did in the movie and light struck cause she remembered where she’d heard it lol. The grandkids not so much, it’s too bad I can’t catch them up by letting them watch it… Anyway I needed a good laugh and this did it😉 Sweet ride for sure too, it’s fun seeing you two get together on projects! Maybe you’ll do a “ground up” build together someday when you’re all caught up?! (As if🙄) Thanks for taking us along✌🏼

[@johnpassmore8176]

Friends are golden. Great work on the truck 58:26 . I dont never expect any other out come tho with the 2 of you. Having fun building a truck.

[@donaldhalls2189]

Coming along great, certainly getting a lot done, thanks for sharing, all the best to you and your loved ones

[@patrickstensness129]

The Ramp truck should have a sleeper bunk added in the back of the cab for the long roadies

[@syedalthafahmed2248]

awesome brent working karl in ur garage happy to see

[@DanskRedneck]

Hey Brent hope you and karl are having fun

[@paulhedman7387]

Great stuff !!!!

[@bigdogcountrymusic7146]

Teamwork = Dreamwork! Awesome!

[@thundermite1241]

A bunk in the rear overhang of the cab would be cool also take advantage of the space under the ramp skirts by adding a massive fuel tank and other stuff too

[@jman6030]

Well cheers 🍻 looks good fellers 😉

[@mikespivey1015]

Love the videos really enjoy your knowledge of fabrication and mechanical really great builds love the general

[@vintagetinrandykehler4824]

I could see a slide out kitchen in one toolbox area, maybe a couple or sleeping bunks in the front toolboxes, and one actual toolbox in the last one! 😉😉

[@UKDrew]

Awesome as Always Really love this Collab Pleasure to watch.

[@daleking8529]

You guys make a great team! Truck is looking awesome!

[@roberthocking9138]

Very nice work, don’t you love those evolution drop saws . 👍

[@colindejersey6249]

Awesome build... great colab

[@jariviitanen2542]

There is some talent here hey💪👍

[@LarryBunch-q7j]

Super Cool build!

[@stuartfletcher2378]

Two bodies and one LIKE mind . You work together so well , like looking in a mirror and ??? . Thank you both for having us in the shop .such a pleasure to watch . Stuart in Ontario ..

[@whittlerdave1440]

This is going to be an awesome truck

[@حمدسيفسالمبدرالكلباني-و5ل]

ماشاءالله تبارك 👍👍👍👍🇴🇲🇴🇲🇴🇲🇴🇲👍🤩

[@robertbennett9243]

Good progress on the truck. "rabbit ears".

[@WingmanJohnny]

Great video. A lot of welding

[@northcentraltransfer1851]

Hey Brent, you and I crossed paths several times at Back to the 50's, but never close enough to say hi! That happened the last time you were here too. Ha ha ha. I did get the opportunity to check out the general at registration. I looked back at my car and noticed you were checking out mine! I thought it was kind of funny. Have a great day!

[@HalfassKustoms]

What where you driving I might remember haha

[@BsBrix]

Brent and Carl working together is the best. Love both of your content guys 😎😎

[@surindersandhi3924]

Hi My Dear Friend Very Very Good Job ❤❤❤❤❤

[@ghouliesgarage3922]

Great video as always Brent !

[@davidnelson6893]

Yes Karl show is cool Peace out

[@hooligan_56labelle22]

Phew that's a lot of welding. But it going to be a great looking rig. Probably gonna get as many looks as whatever it is hauling. I think the General should get a shiny paint job cause it was well built also. Using the same colors and skeem. In the military the generals jeep was always the only shiny vehicle in the whole regiment.

[@borealmetalworx]

The music in this episode is f’n Lit 🔥

[@JohnSmith-is8nq]

That thing is gorgeous.

[@fonhollohan2908]

btw Karl since your using dissimilar metals, you want to stop galvanic corrosion so place hard plastic neoprene small sheets between the aluminum checker plate at all the mounting places to the metal that its attached to, if you don't it will corrode on ya pretty dern fast.

[@albertdehn8381]

The closer you get the better it l👀ks 😀👍

[@billschofield4802]

Nice truck❤

[@garyloflin3215]

By the time you get done it will be all the truck can do to pull itself

[@larrylilly2552]

Big job

[@shanewright6958]

Another good one 👍👍

[@launceherron]

Awesome

[@tugmountianroadcampers5582]

You can`t end a video without the Pablo dance!

[@matscarlsson3336]

Nice work 😮😮😊😊

[@davidsolloway9349]

like 1.6K !

[@albegt98]

Best Team 👍💪

[@lukasgarage956]

Groovy tunes

[@number7__879]

Yes Sir!!!

[@pauloperazza5798]

👏👏👏👏👏👏

[@portsboy1]

I put on 10 miles at back to the 50s on Sunday but alas no Brett and Esther or the General to be seen

[@HalfassKustoms]

We were there Friday & Saturday left Sunday morning.

[@denyadroid2713]

ваш життєвий позитив і постійна усмішка викликає приємні почуття! як, нам, зараз цього не вистачає в Україні :). дякуємо за вашу працю і життєву позицію

[@bryanchinander46]

Love it

[@whatsoutthere6822]

2800 miles is nearly across the country.

[@NZMOPAR]

Karl is near Vancouver in land a bit I think and Brent is near Winnipeg to the west side some where so yep its a long way

[@Danjr948]

I think that's round trip. I come up with 4760 km passing through Kamloops.

[@jonpeters2700]

2796.17 miles.

[@nom8er]

👍

[@ShannonDunham-w9h]

That truck is begging for 6 headlights.

[@caseyspirit9385]

The first half of that camera work was kinda tedious to watch at a down angle but the music made up for it. Never heard that version of putting on the ritz!

[@donames6941]

So for us people in the usa that's 2796 .17 miles

[@davidpeters3224]

I wany a rude once it'd sorted out!

[@riverrat2391]

should of off set stifterns to make it stronger that way the deck would stay looking good longer

[@cyberhornthedragon]

carl needs to polish the plastic of that rotator light up on the roof everything else is shiny but thats a dull finish

[@faridmanrsa7261]

👍👍👍👍👍👍👍

[@1208bug]

😊👍

[@NZMOPAR]

shame he didnt put the D rings in flush not on top save kicking them

[@kodak_jack]

Aren’t you guys concerned about electrolysis? You have aluminum diamond plate going on steel supports. If left outside, it’ll corrode. This, obviously, is after the fact, but you need rubber washers in between.

[@MarqusReyes-yi4ww]

Karl you didn't fix the two dents in the front of the cab

[@upnorthyooper1196]

If you are ever in the states and want to work for free on my build you are welcome to. I can't offer you a plasma table but I can promise you all the grinding dust, weld bruns and smashed fingers you want, I'll even buy lunch.

[@grahamparr3933]

Tell you whut you be dragging some weight there when you’re done.